Oops, I forgot Trick! Attack: 8 Defense: 4 Stamina:1 If you have any ideas for drivers that weren't in the video, I'm always looking for new Lego driver parts! These duplicates took a lot of time to make, but now it'll be a lot easier to do tournaments. After all, what's a system if you can't create multiple copies of your parts? (Making extra layers is gonna take forever though)
@christopherjones304
2 жыл бұрын
The grenade piece that comes in a bat man can set is really cool it’s like a circle but two sides extend out word a bit
@Legobeyz
2 жыл бұрын
That seems interesting, though the bottom part might just be the same size as a stud/bottom of a stud
@christopherjones304
2 жыл бұрын
It’s a tiny bit thinner than a stud piece
@ysten3869
2 жыл бұрын
You can use the technic rubber stopper to make an extreme driver, rubber stopper + small wheel that can have a technic bar + flat 2 by 2 with a stud in the middle
@Legobeyz
2 жыл бұрын
@@ysten3869 I think the rubber technic stopper is the same part I used in 3:39. If there’s any small circular rubber Lego piece I haven’t used it’ll definitely a great piece for a driver (also the stopper isn’t very good at mimicking extreme’s movement)
@beytective
2 жыл бұрын
this is amazing content!!! enjoyed this video!
@Legobeyz
2 жыл бұрын
Thanks so much! 🙏
@haruuuyt6339
2 жыл бұрын
'Its Name Is Sweet But Its Performance Is Not' best line.
@thatonekid5913
Жыл бұрын
A tip I used to make a lot was like destroy but the circle 2x2 plate with the hole in the center is flipped and underneath is a 2x2 rounded plate with the bottom curved. Idk lego piece names but this made an effective bearing driver
@mateoizaelandrada2059
2 жыл бұрын
free friction = rubber ring + ball + free spin stats = attack: 3 defense: 8 stamina: 7 I made this driver in school, I wish I could tell u the parts but I barely remember but nice content btw :):
@draftechoes2992
Жыл бұрын
Take 4 1x1 round plates, place them BELOW a 4x4 round plate with hole and snap stud , add ON THE STUDDED SIDE of the build a 2x2 round plate with axle hole and then add a microphone on the STUDDED SIDE, and boom, a microphone driver.👍
@Legobeyz
Жыл бұрын
I already have a microphone driver lined up! :)
@sitharthbalu4728
2 жыл бұрын
I think if you could have a spring loaded stamina driver but if the spring gets fully compresed it locks in and becomes an attack type would be cool.
@Legobeyz
2 жыл бұрын
That seems like a cool version of reboot. I could try it out, but it might have to be a power core driver due to the space it'll take up.
@thedeadweighted
2 жыл бұрын
So basically the Nothing/Absorb driver?
@Legobeyz
2 жыл бұрын
@@thedeadweighted Yeah, except permanently locked, since nothing/absorb aren’t that reliable
@thedeadweighted
2 жыл бұрын
@@Legobeyz so its a fusion of reboot and nothing? Seems very cool
@WitchHattedWhale
2 жыл бұрын
@@thedeadweighted the concept kinda reminds me of Spriggan LBB’s awaken driver on his custom fafnir
@liamjones4098
2 жыл бұрын
The 12 tooth bevel gear is good for attack, the second version of the 16 tooth gear is good for attack and has decent lad, the 20 tooth bevel gear with a pin hole has really good lad and can be freespin, and if you can find it the bionicle cordak ammo can be used for a rubber ball.
@Legobeyz
2 жыл бұрын
I'll definitely check out that last one, looks interesting
@tiesvdbiggelaar1411
Жыл бұрын
The small gear on an accel you can make the accel stick out or flip the gear for more stamine or attack has decent friction on the fat side
@Legobeyz
Жыл бұрын
Yeah, but it's still the same driver
@britslogohistory9190
2 жыл бұрын
A flat circle plate with no suds on a 2×2 square with 1 stud and u got a amazing attack type driver
@BL4Z1NG_G4M3R
2 жыл бұрын
this is phenomenal, keep up the good work Legobeyz!
@Legobeyz
2 жыл бұрын
Thanks!
@BL4Z1NG_G4M3R
2 жыл бұрын
@@Legobeyz you're welcome! °^•^°
@viktoriaborn3472
2 жыл бұрын
The croissaint is surprisingly a good driver that gets kinda agressive if tilted. However lad on this thing isn't that great Also, if you put the free spin plate on the hat driver u get a wider version of Bearing, which would be even better for it.
@Zombie-TV
Жыл бұрын
Crush: A tip with a thick rubber rim surrounding a plastic tip.
@joseangelomapua5805
Жыл бұрын
matrix looks like a defense type but its attack 6
@whitelatex
Жыл бұрын
amazing i think i've created many gods but my favorite is what you call a drive boot this nun bey thing that drains energy and leaves it still boom stealing energy and resistance
@Mickey-t2z
Жыл бұрын
Make a shot lego driver using a dish piece and a bar piece and a spring
@TheBeys_
4 ай бұрын
"has the stamina of a cube" broke me so hard lol
@the-tl5ud
Жыл бұрын
wedge/triangle can be used for a jumper technic pin can be used for a hollow attack flower can be used aswell technic axel is REALLY good for stamina
@captain8051
2 жыл бұрын
Sick bro
@WitchHattedWhale
2 жыл бұрын
now gonna make a lego beyz bey with these driver designs
@FSH_Dragon
Жыл бұрын
I have two ideas for an absorb driver, so basically drive but add an axle into it then add 2 or 3 more plates above into the axle, or 2 of those special bent plates used on bolt facing opposite directions with a bar going through them
@FSH_Dragon
Жыл бұрын
I know probably nobody understood that
@thatoneshinobi8469
2 жыл бұрын
noice
@1nonly848
2 жыл бұрын
Dang
@notyou6674
7 ай бұрын
i have a really old lego wheel that has an extremely thin metal axle that makes for an extremely long lasting tip, your beyblades are built studs facing down though so you couldn't use it because the connection is 4 red plastic studs on the outsides inner wheel part
@nicovespruzzi6963
Жыл бұрын
I made a free spinning version of drive as well as an attack driver with a free spinning plate, I can show you on Reddit how to make them
@Legobeyz
Жыл бұрын
Sure!
@jlkanghee
9 ай бұрын
You could add a lego minifig head driver that has decent attack and defense. I use it for my lego Wyvern.
@Legobeyz
9 ай бұрын
It might seem wider, but it's the same as a normal stud
@aaronchendomineebduenas6927
10 ай бұрын
I suggest a circle tile with a hole and a stud and put a circle inverted plate and some cheese slopes
@doorbow
2 жыл бұрын
Omg that a lot
@Wolfboy2500
Жыл бұрын
First I thought it was too long and boring from the intro but then I couldn’t stop watching it
@legacyburst1558
Жыл бұрын
Me definitely watching this 10 times again and again 👀
@amytorres8615
25 күн бұрын
Can You please make every single driver that exists
@blackbeastgamer
Жыл бұрын
I have a beyblade that has a tip that is free spinning and mimics Mobius Stats: 4-5 attack 3 defense 7 stamina I don't know the piece's name but it's a wide circular stud that's hollow And it's mainly for good life after death and it's passive aggressive
@CarlDaCool168
Жыл бұрын
For each type of beyblade(attack defense stamina balance) what would you consider the best driver for each of them? Of course just because a driver has the best defense(ability to resist KO)doesn’t mean it is the best practically for a defense type(think quest), and this applies to most, if not all types. So just in your experience, what would be overall the best driver for each type?
@Garatopfan
Жыл бұрын
I know you probably have already done this but you could uae the claw piece that holds onto bars
@DC_Alpha66
9 ай бұрын
Use an umbrella!
@galaxy-oc5vp
Жыл бұрын
i like using the plus design with a bushing on the tip
@diegoslegobeyblades1969
2 жыл бұрын
Wow that's a lot of drivers
@bobbiejoringulet5040
2 жыл бұрын
Have a suggestion, Use a lego head it's like bigger stud driver
@Legobeyz
2 жыл бұрын
But some the stud is making contact with the stadium, it’s the exact same as the stud driver
@karentsen79
Жыл бұрын
Something like zoom but has 3studs stack on top of each other and use a tire around it
@ChrisV57
2 жыл бұрын
honestly, quest is the best driver for defense
@ChrisV57
2 жыл бұрын
it’s just bad at everything else
@Yowadup_
Жыл бұрын
I made these micro Beyblade’s out of Lego, but I don’t have enough technic pieces to make a launcher
@user-lo8yo4mk8s
2 ай бұрын
egg, works like a stamina, attack, and defense in one.
@phucnguyentv7541
2 жыл бұрын
make jolt driver out of lego in the longinus ‘
@xiliu3924
Жыл бұрын
use the gold ore stud/piece for good stamina
@Legobeyz
Жыл бұрын
Could you send a link to what you're talking about? I wasn't able to find the "gold ore" piece, assuming it's not just a stud
@xiliu3924
Жыл бұрын
sure i could send you a photo😊
@j......29
2 жыл бұрын
Nice gives me ideas for my last lego beyblade
@j......29
2 жыл бұрын
In other words I'll use one and give credit
@JVgamer13852
Жыл бұрын
You should make zoom’+ which is the fastest driver I have. It’s a medium sized gear that in the name sez it zooms really fast in the staiteom ,faster than zoom’.
@rinzilla7235
Жыл бұрын
U can use a lego machine gun stud shooter to make hybrid and ignition driver with a rubber band an axel (Im trying to make it myself)
@Legobeyguy1432
6 ай бұрын
This is definitely inspiring and great keep it up
@roskavaki
Жыл бұрын
Well i only watched beyblade metal saga, i remember back in the day me and my friend wanted to create something like eternal defence spin track with the free spin, so we used that part that looks like a turbine, we took the fan off and put a + rod inside and added some smooth parts on the sides to absorb the attacks from below without taking much damage, also you can make it attack type spintrack by limiting the movement of the turbine part
@guillerallensuarez3536
Жыл бұрын
goffy ahh names but nice
@Legobeyz
Жыл бұрын
Lol, any suggestions to make the names less goofy?
@bizkit.4991
Жыл бұрын
That one dot's diamond piece and a rubber unicorn horn
@Blackbloodgamezzz
10 ай бұрын
The rubber drill has a really thin point u can use
@amytorres8615
25 күн бұрын
If you use the top of a wire which is the blue cap it will be a gear flat
@ryoumatsuoka4483
2 жыл бұрын
I am pretty new to the channel but I love ur content
@Legobeyz
2 жыл бұрын
Thanks!
@TWLSoyuma
2 жыл бұрын
You can use that piece that looks like a megaphone Kinda like this📣
@blazingg3030
2 жыл бұрын
Lego ashura ring Keep Keep can otherwise be a plastic ball surrounded by rubber Or a rubber ball with a free spinning ring for L,A,D
@Legobeyz
2 жыл бұрын
Keep is an alright idea, the problem is that I need to find a Lego plastic or rubber ball that I haven’t already used for another driver.
@blazingg3030
2 жыл бұрын
@@Legobeyz Oh ok Btw I love you're videos
@FSH_Dragon
Жыл бұрын
You could try to make a loop driver like on Kreis Satan
@eliotthoude2719
Жыл бұрын
i create stomb driver you now the driver with the roller
@frustratedgamer7504
2 жыл бұрын
I have lego beyblade driver idea and I already made the drivers name is equip
@Legobeyz
2 жыл бұрын
What part is used for contact with the stadium?
@hushu1414
2 жыл бұрын
legitbread?
@kocajjonathan
2 жыл бұрын
*Me trying to find where he accidentally said more then 10 words*
@squadyouthgoals9193
2 жыл бұрын
Hi lego beys
@Ultimate-hangout
Ай бұрын
I think a carrot piece would do good
@supremegible2042
2 жыл бұрын
How does quest have - 999 stamina does it give the enemy stamina how does that even worl
@Legobeyz
2 жыл бұрын
Lol it's just that it's so bad at stamina that it's never going to win any matchups, hence the rating below 0.
@supremegible2042
2 жыл бұрын
@@Legobeyz to be honest it might be better without a driver
@WitchHattedWhale
2 жыл бұрын
@@supremegible2042 agree
@mumtazniazi9877
Жыл бұрын
quest should be lower on the list since it is acutally called suction cup driver but two reasons i think u might have put quest is: one: then there would be no for Q two: quest is spelt with one word like every other driver
@Ultra_Blader
9 ай бұрын
1:Quest is Quest 2:He called it Quest 3:TT named it Quest 4:It’s called Quest 5:There’s no driver called “Suction Cup Driver”
@Ineedhelp-103
Ай бұрын
A cupcake cup piece and a microphone
@RandomName1500
3 ай бұрын
I thought hat would have amazing life after death ngl
@recmadness
2 жыл бұрын
love the video bro
@erthgrl111
2 жыл бұрын
Maybe a robber hat?
@PurpleLover524
2 жыл бұрын
Amazing
@Legobeyz
2 жыл бұрын
Thanks!
@ysten3869
Жыл бұрын
Have you tried making an engine gear driver
@user-oz6ch1fg6z
2 ай бұрын
hat' hus the other lego wide hat with the flater point for more attack
@rohanplayz548
Жыл бұрын
Use a master wu hat as a driver
@Legobeyz
Жыл бұрын
I already did! It’s in the video/thumbnail
@Zombieasium
Жыл бұрын
i made a lego Achilles with 3 modes resist , stud (up side down)and drive
@5dollars237
Жыл бұрын
Whats the best stamina tip?
@FlameLBB_official
Жыл бұрын
Did you upgrade xcel? It looks different
@kentobeans1602
2 жыл бұрын
1x1 plate jumpy attack type
@d4rkvu453
Жыл бұрын
How did you build those pieces make next video how you make it
@theworldofplants5010
5 ай бұрын
Make a bullet driver for venom and erase diablos
@PokePlushies11
Жыл бұрын
How do you make plus spring
@ImPrettySureThisIsMax
11 ай бұрын
Do one that has the Lego Star Wars lightsaber
@Nightly_Night
7 ай бұрын
Yo, how do u make the reboot driver? I wanna try it our for myself but i dunno how to do it
@Legobeyz
7 ай бұрын
It's described in the lego apocalypse video.
@Nightly_Night
7 ай бұрын
@@Legobeyz is it the only way u know? Cause i wanna do smth simular but on a smaller bey which doesnt fit all that setup
@Legobeyz
7 ай бұрын
@@Nightly_Night Well as long as you get the core functionality of it you can try to make it smaller, but otherwise there are probably smaller but less functional designs of reboot
@FNAF_playz
Жыл бұрын
Try a Lego 4 by 4 and a 1 by 1 it is sometimes it is a attack driver but has no life after death
@Legobeyz
Жыл бұрын
That's...just a 1x1 (if you mean square 1x1, yeah I've tried it and it dies instantly)
@Talksensible
Жыл бұрын
I think he meant 1x1 circle
@rupert_1491
2 жыл бұрын
Maybe you could use an inverted 2 by 2 brick
@kaysakuhitoshi507
Жыл бұрын
1x1 round tile w/ pin
@Legobeyz
Жыл бұрын
That's already a driver
@kaysakuhitoshi507
Жыл бұрын
Oh
@kaysakuhitoshi507
Жыл бұрын
@@Legobeyz how about LEGO PART 30192 Tool Grappling Hook?
@Legobeyz
Жыл бұрын
@@kaysakuhitoshi507 The bottom is irregular (the center doesn’t touch the ground), making it not a good driver
@kaysakuhitoshi507
Жыл бұрын
@@Legobeyz I tried it I thought it was allright
@ChaoticBeanzRoblox-69
5 ай бұрын
Driver idea: plus': plus but it has got freespin
@sebastianaquattropani3101
Жыл бұрын
You can make variable whit bread eraser and it can awaken
@shadowdante2971
Жыл бұрын
Make dimension driver
@eliotthoude2719
Жыл бұрын
and it's work
@VortexBricks
Ай бұрын
Please look at Ninjago spinners
@deepanjalimehra5125
Жыл бұрын
you should make bullet
@user-mc8tj3kx4p
5 ай бұрын
Lightsaber pin
@Number_one_giselle_fan
2 жыл бұрын
Hay I want to ask you a question so they is a game called trailmakers and I sometimes make beyblades in it I'm going to ask a few people but I want to make one of your beys in it just asking for permission I'll give credit also cool
@Legobeyz
2 жыл бұрын
Alright, sure
@SynergyLBB
2 жыл бұрын
use a zane piece like to circle thing its like quick and extreme
@Legobeyz
2 жыл бұрын
Could you provide a link?
@SynergyLBB
2 жыл бұрын
it doesnt work when i put the link it deletes it but its named Minifigure, Weapon Throwing Star (Shuriken) with Textured Grips, 2 on Sprue Item No: 19807 its on bricklink
@Legobeyz
2 жыл бұрын
@@SynergyLBB Ohhh that piece, yeah I already tried it but its non round shape and material makes it really bad as a driver
@SynergyLBB
2 жыл бұрын
@@Legobeyz like i meant the middle not the shuriken
@Legobeyz
2 жыл бұрын
@@SynergyLBB Oh yeah that could work. Is there any way to connect it to a driver?
@SynergyLBB
2 жыл бұрын
cool
@prabhakarmanjrekar6211
11 ай бұрын
Make a lego venom devolos beyblade challenge
@Blackbloodgamezzz
Жыл бұрын
Spiral ball style drivers need to be lower
@itsmanaigkids5699
Жыл бұрын
hey I got one it's called the popcorn
@zukratzandljoe
Жыл бұрын
A Top Hat
@tilbursinnit6196
2 жыл бұрын
I want to see something like satans driver, using some sort of wheel
Пікірлер: 244