You have some of the most helpful and practical tutorials for Blender on the internet - Cheers.
@Brandon-3D
Жыл бұрын
Hi! Thank you - that means a lot. I started doing these because I had trouble finding tutorials without fluff and that didn’t assume I already knew a lot. So thank you very much! Cheers!
@ChadMeter69
Жыл бұрын
I started learning blender a month ago, and your beginner tutorials helping a ton , thank you.
@Brandon-3D
Жыл бұрын
Hey sorry this was delayed, but thank you for the kind words. I love hearing that these videos are useful (they take a while to make LOL). Thanks for watching and take care!
@pilotdawn1661
Жыл бұрын
Again another excellent demo. Been working with Blender for several months, and STILL learned new things watching this video. Great channel and approach to demos. Very helpful.
@Brandon-3D
Жыл бұрын
You are too kind! I'm glad this video was helpful to you. Thank you for all your support!
@wallyanimations
9 ай бұрын
Thank you so much. I love have you start from absolutely 0 in your explanations and then into clear details. Great stuff. Thanks again.
@lutherhad
10 ай бұрын
i love way you explain and show it .. its amazing
@lutherhad
10 ай бұрын
i am a beginner too
@Brandon-3D
10 ай бұрын
Thank you!!!
@nounix
Жыл бұрын
VERY well made! Concise, clear and in depth. Bravo.
@MRUStudios
2 жыл бұрын
I love your videos Brandon! Thanks so much for the work and effort you put into making them clear and informative! 🙂 I hope you have a great rest of your weekend my friend! 😃
@philipmcdonnell7168
2 жыл бұрын
Click extrude. Hmm, needed to realise that existed a few months back... :) Thanks for another clear video, Brandon.
@Clara-hl3jb
Жыл бұрын
nice!! still have alt e " extrude along normals" helps a lot! good tips!
@VitusPolikarpusSM
2 жыл бұрын
Thanks for this tutorial, I'm more and more interested in deepening knowledge about blender
@soupmuncherhahaha
2 жыл бұрын
This was very cool and helpful. Thanks!
@Brandon-3D
2 жыл бұрын
Thank you! Glad it was helpful and thank you so much for watching! Take care!
@DangerTeenager
Жыл бұрын
Thank you for the video :) that was very clear and straight to the point.
@windworldwide8840
2 жыл бұрын
thks ! useful tips ! ... and one more : ... you can recall the extrude properties panel with F9.
@DarthTaterz7
Жыл бұрын
Dude this helped so much you gained a sub from me !
@Brandon-3D
Жыл бұрын
Thank you! Always love hearing a video was helpful!
@taaskeprins
11 ай бұрын
Hi, thx for this instructional vid!! There is however a way of extrusion I cannot find anywhere: extruding a face along a curve. I do not mean extruding an object along along a curve, but one face. So suppose you want to make a make a curved hook coming out of that sphere. Hope you can help!
@ChaosCORP49
Жыл бұрын
THANK YOU SO MUCH OMG I WAS TRYING TO RIGHT CLICK SINGLE VERTICES THEN RIGHT CLICKING AND HITTING EXTRUDE AND IT WASNT WORKING AND I WAS SOOOOOOO CONFUSED OMG THANK YOU SO MUCH BUT NOW I HAVE A NEW QUESTION OMGG HOW DO I SMOOTH OUT THE VERTICES NOW YOU KNOW LIKE GET IT TO LOOK HIGHER POLY AND SMOOTH OMGGGGGGGGG THANK YOU SO MUCH
@44Mangmun
Жыл бұрын
Nice vid! I have question, how to limit the length of extruded vertice while it moving ?
@Paul-vo4ze
Жыл бұрын
Thanks for this! Can you extrude a complex object backwards (and outwards) to create an object without undercuts?
@BLENDER_CLUB
Жыл бұрын
Great thanks for subtitles in russian!!!
@Brandon-3D
Жыл бұрын
No problem 👍
@AnaAcapella
Жыл бұрын
So here comes a Noob question, once you make an extrusion (let's call it E1) and then another (E2) , you cannot go back to E1 and change the length of the Extrusion...? Help would be appreciated :)
@Brandon-3D
Жыл бұрын
No not easily. Once you move onto the next it’s done. You could do it manually, undo it and do it again, or get into learning geometry nodes where you’d have more non-destructive control. Still not even sure that’s a solution. Sorry for the bad news.
@JonToons0208
2 жыл бұрын
Cool
@Brandon-3D
2 жыл бұрын
Thanks Jon!
@JonToons0208
2 жыл бұрын
@@Brandon-3D you're welcome. And can you do the egg cracking thing?
@Brandon-3D
2 жыл бұрын
Hey, what is this egg cracking thing?
@p1ner0
10 ай бұрын
Subscribed. One rare excellent Blender mentor... Thank you for your time, I wish your CPM goes to 100$ :D Peace and Love from Skopje
@DerekDumas
11 ай бұрын
How about Matrix extrude, some one said X+M would make a matrix extrude.
@galazanugrah5900
Жыл бұрын
then how to do negative extrude of face with the edge of it following too?
@elifmiami
Жыл бұрын
Hello, If face was locked how can we extrude in edit mode ?
Пікірлер: 39