LAST CHANCE FOR THE HALLOWEEN SALE! USE CODE: CLEAR - sammit.net
@awdobsession717
2 жыл бұрын
New “bushes” 🌳 🌳 Evo is coming along 👍🏻
@HAFIZ-vx3fy
2 жыл бұрын
Is that a supraa
@user-dp6wn4hs8y
2 жыл бұрын
Sam, how much does a whole body paint cost in japan? i have a mid size sedan.
@bioshift1
2 жыл бұрын
Hey Sam it's a good idea to put a anti galling compound on the threads of the bushing press. It will last longer/not cold weld and get stuck. Great videos like usual.
@casperzawada6844
2 жыл бұрын
Yes do take the carbon roof and the TME is gonna be a track car and it will make it lighter
@jarredlehman9193
2 жыл бұрын
Yes, by removing weight from the roof it will help to lower the center of gravity! 👍
@E9MPR
2 жыл бұрын
Sam, the steering rack in your TME RS should be a different quicker rack to the normal GSR. RS rack is 2.1 turns lock to lock were as the GSR is 2.6.
@crazyshock916
2 жыл бұрын
Don't click on that link probably got a virus on it.
@neijapereira3188
2 жыл бұрын
youtuuu.tokyo/watch?v=W7t5S5DFtLP
@bastienadam6530
2 жыл бұрын
Same for dash and door cards : GSR one are not the same that RS ...
@bastienadam6530
2 жыл бұрын
and trunk isn't one for an evo model ... (carisma?)
@frankz5864
2 жыл бұрын
Every CP9A owner knows this
@tucoerquilenne6765
2 жыл бұрын
If the shop doing the Abandoned Skyline is gonna do your EVO I say keep the Carbon Roof. They should be able to do that for not much more money. Even accounting for cost of driving to pick up the EVO that was a bargain of a lifetime.
@pastytit
2 жыл бұрын
I'd cut the a B and c pillars and take the roof and gutters to them.
@neijapereira3188
2 жыл бұрын
youtuuu.tokyo/watch?v=EL1UeTHyhqU
@aeok18109
2 жыл бұрын
Definitely swap the roof. That’s baller af
@awdobsession717
2 жыл бұрын
💯 percent! 👍🏻
@browningryann
2 жыл бұрын
I think the carbon roof would look good! It looks like it's in good condition so it might be nice to have overall.
@neijapereira3188
2 жыл бұрын
youtuuu.tokyo/watch?v=bCUt46emON9
@unicornsmackdown69
2 жыл бұрын
Infrared heaters are the move for any garage /studio space, only way I can stay warm in the winter with the ventilation running, those kerosene heaters only heat the air and make me feel sick from the fumes, while the infrared won't be affected by wind or ventilation, and no gas smell. 🤙 it's the way to go I assure you.
@christopherbradyhardin4282
2 жыл бұрын
The carbon roof is sick I would try to use it if it was me 👍🔥
@jasonpetrich4141
2 жыл бұрын
Definitely take the carbon roof even if you don't use it on the tme, you could trade if for something you need later
@bensonthiphakone6300
2 жыл бұрын
A lot of that stuff will be different being a gsr. Steering rack is different ratio. Those door cards are for electronic windows not crank windows like in your rs as well as that dash has a hole for the airbag which you can find a glovebox insert for but rs never came with them from factory. That bootlid is a mirage bootlid not a lancer/Evo one so won’t look right on your car either. Rear subframe being for ayc diff is also different from rs lsd diff and subframe so a lot of the stuff you’ve scored will work on your tme but won’t be right for it if you’re trying to restore it back to oem spec
@tommccrory1083
2 жыл бұрын
Well said, was going to say that bootlid looks different
@stevemasters4748
2 жыл бұрын
Guys, the TME RS is Sam's dream car, his Wife even said so, I am sure he knows all this intricate information already. He has amazing attention to detail with Evolutions.
@markojovchevski6617
2 жыл бұрын
SAMMIT : oh a gas can with the litle Mitsubishi logo so cute Also slams it
@hh.detailing_
2 жыл бұрын
The trunk is a mirage trunk so try get a evo trunk the evo trunk looks a lot cleaner and more aggressive
@yo_jordy
2 жыл бұрын
do the roof swap without a doubt, it’ll look so clean
@jarredlehman9193
2 жыл бұрын
And the lighter roof will help lower the center of gravity, for track days! 👍
@Foxrinc
2 жыл бұрын
Definitely swap the carbon roof!
@bhop.builds
2 жыл бұрын
That kerosene heater commentary was funny. I grew up in the boonies in North Carolina. My dad always used a Kerosene heater that looked pretty similar to that one in his garage in the winter. Those things put out more heat than you'd think.
@madmatt2024
2 жыл бұрын
Kerosene heaters aren't just a Japanese thing. We've have had them in the US for a long time too. I considered one but in the end I installed a forced air propane heater in my garage. It warms it up nicely and there are no fumes because all the exhaust goes out the chimney.
@mattrh2848
2 жыл бұрын
The boot/trunk isn't from an Evo, it's from a normal lancer, bit shocked that you heven't noticed this yet.
@manrs6037
2 жыл бұрын
yup...that boot from Lancer CK
@pjacobs1338
2 жыл бұрын
Good things happen to good people! Glad to see your Halloween haul. Big yes to the carbon roof. Can’t wait to see the finished project. Keep saving the legends!
@riddlemethis01
2 жыл бұрын
I must say, that's the best bang for the buck I've ever seen for $10
@WhuDhat
2 жыл бұрын
You know what just dawned on me, Sam bought 2 buckets from that yard, removes them, and puts 2 more right back. Just with considerably less parts, shout out to Rohab lol. Get that man something nice for Christmas. & Hey you know what would be a really cool use for that 2 door skyline body? a sit in SIM rig with the monitors as the windows. Could even go full send and put those hydraulics on to articulate body as you drive. And please go carbon roof on the tme, would be baller as. If not someone else would gladly take it and probably butcher the install lol
@sgambless
2 жыл бұрын
19:51 me Immaginin "hey guys I don't know where the time laps ended because the camera heated up an shut down" Hahaha sgambless here love man
@tylersanders2744
2 жыл бұрын
The TME is already the lightest Chassis of the EVO 6 line. Try to save the Carbon Roof!!!!!!!!! It would save a few pounds and be sick!!!!! Plus that's super period correct piece that would help to set it apart!!!
@ic4ka668
2 жыл бұрын
You are currently my favourite youtuber i dont know much about cars but your vlogs and energy make my day. I watch you every morning with my breakfast. Greetings from Bulgaria and keep up the quality content!!!
@fiqriegillangramadhan1661
2 жыл бұрын
i'm stoked to see evo projectt comingg dudeeee!! DO IT SAM
@OllamhDrab
2 жыл бұрын
For a workbench some really high-quality casters with brakes on them can do you some good while you're figuring out your layout, or maybe if you want to move your work to certain filming light. (Also I'd probably hang onto that carbon roof and headliner even if you're not sure yet what to use. (Or sell, that's probably no good to a scrap metal place. ) Just put stuff on the wall. :) )
@DiyDadFL
2 жыл бұрын
Definitely need to TommyFYeah spec this car and powdercoat/zinc/vapor blast everything. I can't see you putting this Evo together without making it look pristine.
@realgold198
2 жыл бұрын
We need the carbon roof for sure!!!
@jaywest4102
2 жыл бұрын
Need more of Mae driving. Want to see the two of you tandeming
@sgambless
2 жыл бұрын
Me too
@TheHomieNess
2 жыл бұрын
That’s a stretch bro
@hanaaaae2352
2 жыл бұрын
When sam got sad cuz didnt got something "personal" from that memory card . 😂 I see you sam .. i see you .. Btw . Good content . I love to see ur everyday life . So colorful . Keep it up .
@timholubowitch9097
2 жыл бұрын
I can't wait to try a bit of the gktech stuff. First car I've had that they make stuff for. I'm used to only delrin mounts and super pro 95k durometer stuff. For the cars I've had.
@beto12345
2 жыл бұрын
$10 treasure!!! For that money the only I had for just pure luck was a Subaru Sti ver3 rhd dash, and a Honda Accord Euro R rhd dash. That EvoTME is going to be awesome!
@Garage533Ohio
2 жыл бұрын
If you can do the carbon roof I'd say go for it. I know it would probably be a pain in the ass but whoever does the body work and paint should be able to do it the right way and if so that'd be sick af
@celiturbo
2 жыл бұрын
Impacts destroy the threads on puller/press tools. Throw it all in a mounted vise and use a breaker bar. Or just a long 3/8 or 10mm bolt/threaded rod and a couple sockets work for something cheap to use the gun on, good use for old factory headbolts.
@heinrichr
2 жыл бұрын
No Sam! Most of the parts you have is GSR trim. Different rear subframe, differential, steering rack, dashboard, door cards, interior harness, AC components and etc. Good parts car tho.
@zadekharbat
2 жыл бұрын
Don't swap out the original unpainted RS mirrors for that rough painted set. Also the minimal weight savings from the carbon roof are not worth the pain that comes with swapping early evo roofs. Also the RS cars came with base lancer seats, so don't dedicate too much into sourcing evo seats.
@Zjedi
2 жыл бұрын
@Sammit, will your landlord allow you to rent the other side of the warehouse where they erected the wall? Or you would prefer to move to a two story building?
@sonosheereleoux2694
2 жыл бұрын
sam, I don't think that's the trunk for the 6.5tme nor the evo 6... supposed to be the kinked trunk. 7:00
@LawrenceSeetoh
2 жыл бұрын
I voted for removing the carbon roof and figuring out if it will fit into what you want to do
@taznz1
2 жыл бұрын
Problem is, it's probably attached with 3M panel bond, which would be a nightmare to remove, probably easier to cut the steel around the carbon fiber to remove it from the car, then flip in over and grind the steel away until you get to bare carbon fiber. Trying to mechanical separate them will just end up breaking the carbon.
@weeaunsim4320
2 жыл бұрын
Take the carbon roof, even of u don't put onto ur evo its gonna worth money, heat up the adhesive & just slowly scrape it up, no big deal, if its a genuine hi quality carbon it wouldn't even have any scratch & i think u should put the current rollcage back in the evo after refurbishing it, i mean u gonna time attack spec it so why not use that rollcage
@henriquesenn1828
2 жыл бұрын
put the SD card inside a bowl of rice, so if it's not working because of moisture, that way you'll be able to get the moisture out
@Symeswilly69
2 жыл бұрын
The white shelf in the shops looking good 😂
@coreydevins4948
2 жыл бұрын
The carbon roof on your TME would be sick
@awdobsession717
2 жыл бұрын
Agreed!
@MikroZoo
2 жыл бұрын
Don't put a GSR steering rack into the RS, the RS steering rack is 2.2 turns lock to lock!
@rick-olivierfilion4
2 жыл бұрын
Definitely worth the time for such a high value part and I know you know it, trust the force Sam trust the force this roof is your destiny
@ftb4700
2 жыл бұрын
Sam I can’t wait for the EVO to be ready
@nnaheim.
2 жыл бұрын
You will have to pal
@wilmar12341
2 жыл бұрын
@@nnaheim. .He didn't finish it right? There are no more EVO videos on the channel
@pauligunz5686
2 жыл бұрын
You scored with that Evo, 10 bucks, all day bro.....
@TheTopG420
2 жыл бұрын
This is a budget build with all these fantastic savings 🏴❤🦄..car picker
@Izaakswrld
2 жыл бұрын
Use the carbon roof!!!! And also picking up on another's comment the RS rack is 2.1 turns lock to lock were as the GSR is 2.6
@danielmalolepszy7541
2 жыл бұрын
Never heard an Australian call a wippa snippa a weed wacker
@ae86hachi
2 жыл бұрын
Best $10 come up ever! I'm so hyped for the Evo
@changw4683
2 жыл бұрын
Hey SAMMIT! been waiting since november for the next episode of the evo 6! Whens the next vid? ITS MY FAVOURITE SERIES! Keep up the good work!
@valentinowright7666
2 жыл бұрын
DEFINITELY INSTALL THE CARBON ROOF ON THE TM EVO ❤❤❤❤❤
@MegaGearz
2 жыл бұрын
I was seconds away from asking why you didn't attach your impact to the press end then finally you came to your sense and did 🤣
@juddy953
2 жыл бұрын
KEEP the carbon roof. get the carbon re cleared and make it stand out from other evos
@Jaxson8157
2 жыл бұрын
Put the carbon roof in the tme. It’s sooo bad ass!!
@doubble80
2 жыл бұрын
We have Kerosene heaters in the states. But for $20-50 u can get an electric heater that works better. When I was younger kerosene heaters were like everywhere not so much today.
@howell_124spider
2 жыл бұрын
Dude you so need that carbon roof. Even though I don't own JDM I love watching you work and explain about different mechanical techniques. I love your passion for Japanese culture and how you want to show us in your videos that's what singles you out as a top KZitemr, your passion
@letsgo5303
2 жыл бұрын
With the haul you got off that car, take the roof. At the worst it gets broken, at a minimum you have a carbon roof, at best your TME has a carbon roof or you have one to sale.
@user-ds1nb9sg6n
2 жыл бұрын
Yes use the carbon roof
@goranmirnic9573
2 жыл бұрын
Hi, nice as allways. Regarding the card: try an old nerd trick. Putt her in the freezer for a few hours. And then be fast.
@dubiousf00d
2 жыл бұрын
Carbon roof. I think having a TME is an awesome flex..having a TME with a carbon roof, ultimate flex! Doo it!!
@protofreak9518
2 жыл бұрын
GKTech also has a dual caliper setup that works without cutting the knuckle so do team villains in Washington there’s uses a vw beetle caliper
@kostygarage4328
2 жыл бұрын
That's kinda funny I found a SD card in a miata I bought with pictures of the old owners, sucks that one didn't work.
@shyshydad
2 жыл бұрын
100% put that carbon roof in a wetsand etc + matte clear for ultimate dad satisfaction
@mohamedallie6430
2 жыл бұрын
yes carbon roof is a must on yours. I would most deffs do it.
@tlamedia_
2 жыл бұрын
Yes on the carbon roof
@hakuta87
2 жыл бұрын
Hi🙋♂️ First, i wouldnt use heat on balljoints, grease in them heats up and might be dangerous 😅 another thing: i really hope someone is going to strip that crown (visors, bodykit etc.) and sell those parts for people who needs them 😁 anyway i love your projects and videos, keep up that great work💖
@HGSLR2306
2 жыл бұрын
Do the Carbon roof on the evo
@ridhaadelong4369
2 жыл бұрын
Definitely gotta do the carbon roof!!!!!!!!
@txvenomkeeper255
2 жыл бұрын
Carbon roof for sure
@EpicRealmTV
2 жыл бұрын
TME Carbon Roof! YESSS!!!! 💯% RAW AF!
@ashborntempest4675
2 жыл бұрын
You should Sam it gonna be worth it man
@silashudson2793
2 жыл бұрын
sam pls bro use that carbon roof would look really fuckin sick man
@NoblePineapples
2 жыл бұрын
Carbon roof on the TME would be cool!
@apeeric
2 жыл бұрын
You better take that Carbon Fiber roof Panel!
@RicQuintanilla
2 жыл бұрын
2 things about your rear knuckles, (i'm at 14:05) why not use your impact with a socket? thats what i did when i was doing my drife shafts. GRANTED, you want to use the hand tools to finish the install, but just impart the shit out of the old one. would the Z32 NA or Non hicas knuckles work for the S15 Sub? they look pretty much the same. same Ebrake set up and everything. when i went to 5 lugs on my S13, i just raided one in my local junk yard. the ebrake lines where the only hard part, I needed 2+2 lines for the length. ALSO check and make sure the splines are the same for the hubs and the half shafts. there are different ones for different power trims. you might need to re-use the S15 hubs.
@Socalhookerkrewfishing626
2 жыл бұрын
Gotta keep the roof
@N037O
2 жыл бұрын
You definitely need a workbench.
@Odd_Redneck
2 жыл бұрын
as a engineer, i would like to see if i could make hi-cas work.
@pastytit
2 жыл бұрын
I would deffo use the carbon roof.
@jasonpetrich4141
2 жыл бұрын
It's so funny. You definitely need to put Vaseline when pushing in the bush!!! Or you will hurt her. Hahahah rofl 🤣 sammit there is an ing after,...... there called ( bushings!!!!) Bro come on.
@mason8725
2 жыл бұрын
I personally tend to Steer clear from using Vaseline as its petroleum based,,,,waterproof marine grade grease is a winner tho. Also correct me if I'm wrong but don't you press the bush in dry and only grease the sleeve in the middle as that's the only part that needs to move.
@Nick-ve8iy
2 жыл бұрын
Carbon roof 🤘🏻
@chrisroberts32
2 жыл бұрын
100% get the carbon roof
@Lowrept
2 жыл бұрын
yesss carbon rooffff
@funwithcars3154
2 жыл бұрын
Yeah I reckon fit the carbon roof to your evo
@yehornaumov5893
2 жыл бұрын
Good job on bushings. Thank god your not wotking on rusty chrysler or fords.
@LeninVera
2 жыл бұрын
Try a linux pc or android phone for that memory card. Could be formatted a way that windows wont read.
@simonmage7710
2 жыл бұрын
Yes power tools on those press tools works, but the press tool wil crack after just a few times of that abuse 😅
@kanethomo2483
2 жыл бұрын
Yes use the carbon roof!
@MickelHomer
2 жыл бұрын
Removing the roof should be easy it’s all seem sealed I’ve seen them do it at body shops
@naveenmm4029
2 жыл бұрын
You should do the Cardona fiber roof top
@VIKINGRAGEQUIT
2 жыл бұрын
100,000% onboard for the carbon roof!!!!
@sewlfn
2 жыл бұрын
swapping the roof would be cool asf
@elanwalker3226
2 жыл бұрын
hell yeah take the carbon roof
@LNRRidez
2 жыл бұрын
You should just LS swap the Evo and be done with it....bring on the hate comments in 3.....2.....1.......and GO!!!
@JS-oi5jt
2 жыл бұрын
uh... wait what? you have a carbon fiber roof, you're restoring a beat up old car that needs a ton of work, and you might not try to put the cf roof in while youre at it?!!? yes put it in!
@hash0121
2 жыл бұрын
Yeh deffo do the carbon roof
@kevinward8288
2 жыл бұрын
Yes to the carbon roof it looks awesome 👌
@Fluff3H
2 жыл бұрын
We have kerosene heaters here in australia m8, not very common tho to be fair, but my dad always had one going as it was more convenient than gas and cheaper than electric, could get some from kero the local servo! its also available at bunnings but its a major ripoff there
Пікірлер: 299