Check out The Real Ultralight Logitech G Pro Superlight Wireless gaming mouse which is only 50g @ kzitem.info/news/bejne/y2N-345jeoqqiYo
@failentisagood
3 жыл бұрын
Are the switches on the g pro x superlight reliable, there is still a chance for a double click?
@dickofferman679
3 жыл бұрын
So much work for 2k views damn, you deserve more. Gg
@Beardedbob
3 жыл бұрын
Thanks man appreciate the support and glad you liked to content
@XanderBaatz
3 жыл бұрын
Just wait. His audience will grow bigger than his beard, eventually.
@mzo.9223
3 жыл бұрын
@@XanderBaatz you right lol
@deeeeeeeench1209
3 жыл бұрын
Nice mate mission complete ✅
@Beardedbob
3 жыл бұрын
Thanks Deeen ch glad you liked it 👍
@alialbeloshi5425
3 жыл бұрын
I need one white how can buy for me I live in dubai , we don't have this mouse in Middle East , who will help me for that
@IOSam
3 жыл бұрын
You rock Sir!!! Super useful as usual! At this point, I have learned the lesson to NEVER try to open/hack a mouse without first checking one of Beardedbob's tutorials.
@Beardedbob
3 жыл бұрын
Thanks IO Sam glad you liked it 👍
@wenhanzhou7409
3 жыл бұрын
Can I send you mine viper ultimate for a weight reductions
@Beardedbob
3 жыл бұрын
I can do that, here's , my shop if its not there just send me a message to chat shop.beardedbob.com/collections/customised-gaming-mouse?page=1
@DontHesitate140
3 жыл бұрын
Hope they make a 8khz hero sensor soon that's the wave. Nice video
@ikomu8907
2 жыл бұрын
same switches 😂 what a joke
@NotGoodAtYoutube
2 жыл бұрын
Do you think you could fit a g pro wireless pcb into the mm720?
@anyhow5860
Жыл бұрын
Is it ok to remove the spring in my scroll wheel? I'm using super light , I'm just curious if g pro wireless doesn't have spring in scroll wheel. TIA
@Beardedbob
Жыл бұрын
it still works fine without it... the spring is to help prevent it from coming up when you scroll but i've never had an issue with it removed or heard of one.
@Chuha97
Жыл бұрын
I accidentally used the bottom shell's screw for the M1 M2 button holes (smaller diameter). Now they're stripped. Any idea I could use to fix it?
@Surge44
2 жыл бұрын
Probably costs them like 20 bucks to make over there in China, and then sell it for $150 USDs. The shape is what I like about it, makes me aim better then 4 other mouse I've tried. Only thing comes close is razor viper but I don't like the grip of razor viper compared to G pro
@LucaDellaZazzera
8 ай бұрын
Are the two shells interchangeable? I have a G Pro Wireless and I was wondering if the x superlight shells are compatible with it
@mr_Senbernar
2 жыл бұрын
Hello, my friend! Please tell me what kind of button is installed under the wheel of the g pro x superlight? I can't find it anywhere. There is also no way to measure the dimensions. :(( Thank you in advance!
@MushroomKidable
3 жыл бұрын
can you make a fix video for the squeaky g pro superlight mouse buttons?
@Beardedbob
3 жыл бұрын
I haven't got a squeaky switch to fix 😭... If someone sends me one I can do a video. To fix it add some keyboard lube to the switch and that should fix it.
@Rosa-cr7qc
3 жыл бұрын
@@Beardedbob yup, I believe I have seen people do this with krytox 205g0 on the razer viper to fix creaking with alot of success
@scare8183
Жыл бұрын
it absolutely needs the support bar for the battery. mine fell off inside the superlight, and i had to reglue it, which isn't something i'd want to do on a mouse that costs 120 USD. never mind that i payed more for less of a mouse tbh. still my favourite mouse tho, but with compromises.
@AlexanderHaibel
3 жыл бұрын
I have a TSM G Pro and don't care about resell value. Could I swap the top shell from that onto a Superlight? It looks like enough of the screw holes align.
@Beardedbob
3 жыл бұрын
Maybe but you might have a trim a few different mounts off it. The issues will be if the internal skeleton fits in it and mounts.
@voitek7944
2 жыл бұрын
You selling the TSM g pro?
@AlexanderHaibel
2 жыл бұрын
@@voitek7944 already did :(
@voitek7944
2 жыл бұрын
@@AlexanderHaibel rip. I would love a tsm g pro because of how unique it is
@carloscoldebella9450
Жыл бұрын
Are the buttons on the g pro superlight and g pro the same? I need to do some maintenance and version 1 is half the price
@Tk12038
2 жыл бұрын
What size screwdriver do you use for the Logitech G Pro Superlight
@UnknownPrizrak
2 жыл бұрын
What's the name or model of the little squared scroll switch?
@-clue
3 жыл бұрын
if you had to recommend one or the other which would it be?
@shleepyo57
3 жыл бұрын
I'd recommend the superlight, but that's personally from me
@Beardedbob
3 жыл бұрын
Superlight but with modded switches as a min
@It_was_a_dream
2 жыл бұрын
How big of a battery can you fit in there i want to buy one and install a big battery , i don't care about the weight
@pcxgaming44
2 жыл бұрын
does anyone know what screwdriver you need to open the mouse?
@caluoxd6946
2 жыл бұрын
can the micro switches for the thumb buttons and the other small switch for the Middle click be switched and replaced?
@toxic1428
2 жыл бұрын
a
@mjcheung
2 жыл бұрын
Would you say the click's shell and the body shell are interchangeable with each other (gpw and gpx)? Even though you said they look identical, I'm wondering if you actually tried switching them around
@illitero
2 жыл бұрын
Can the side buttons (not switches) from the GPX be used to replace the modular blue plastic/magnetic ones on the standard GPW? I tried looking but couldn't find any mention of somebody doing it. They look roughly the same but it's hard to eyeball how they'd all actually line up when assembled haha
@MarztechRacing
3 жыл бұрын
My super light side button the front just broke
@Beardedbob
3 жыл бұрын
Yike... RMA
@markbangug469
3 жыл бұрын
How did you break your Logitech Superlight on your stream?
@Beardedbob
3 жыл бұрын
Well I modded it and it went wrong :-p
@markbangug469
3 жыл бұрын
@@Beardedboboof hope you get a fix for that soon :D
@markbangug469
3 жыл бұрын
@@Beardedbob btw is it possible to replace the side switches of Logitech Superlight?
@Beardedbob
3 жыл бұрын
yeah but I messed them up
@crisnmaryfam7344
3 жыл бұрын
EMOJOS!!!!!! seriously though love your channel lol.
@Beardedbob
3 жыл бұрын
Trying to get the Click through rate up, open to idea's
@philipp594
2 жыл бұрын
If they just added hemp or glasfiber reinforcement to the pcb and made it thinner it could have weighed a lot less.
@Beardedbob
2 жыл бұрын
Yep it’s a good idea
@AdrianGonzalez-ii7jb
2 жыл бұрын
i hate that logi puts the screws under the skates!. Mostly because their switches are bad quality and get double clicks issues, and we have to replace em
@Beardedbob
2 жыл бұрын
unfortunately 99% of mice have this issue only Razer have one mouse that does this and the screws are under the label.
@n3ptuchan848
3 жыл бұрын
isn´t it also the superlight has a smaller pcb cause it doesn´t have RGB lighting?!?!?
@Beardedbob
3 жыл бұрын
same size in dims it seems but it does have a smaller ribbon cable connector and its also thinner
@blacklod4985
3 ай бұрын
Very good and informative video.
@Beardedbob
3 ай бұрын
Glad you liked it.. did it help you
@blacklod4985
3 ай бұрын
@@Beardedbob yes. I'm trying to mod my mouse g pro wireless and change the left mouse button cuz it wore down.
@Deluxe497
3 жыл бұрын
So if I wanted to mod a Zowie fk2 and make it wireless is it possible? I feel like that’s the perfect mouse for me but it’s never going to happen.:(
@Beardedbob
3 жыл бұрын
There is an FK2 wireless mod, its hard now to get the base and you will need an FK2 not the FK2-b
@melvinjohansson988
3 жыл бұрын
I recently found your channel and I love your content! Gonna sub to yt and follow on twitch!
@Beardedbob
3 жыл бұрын
Awesome, glad you enjoy the content on both platforms... look forward to seeing you around.
@formidable2368
3 жыл бұрын
I can’t believe they kept the same switches 😒...just got my superlight 5 days ago and can’t get my aim on point...feel like is too light...probably I just need more time..thanks for the useful information.
@Beardedbob
3 жыл бұрын
Each time I press the LMB or RMB it makes me want to cry.
@hisnotsa
3 жыл бұрын
What size is the screw? or should I just get a assortment of #00 screws
@Beardedbob
3 жыл бұрын
lots of screws :-p
@rdb3823
3 жыл бұрын
which switch do you recommend for GWP SUPERLIGHT?.KAILH 8.0 OR 4.0 THANKS. I WANT LITTLE BIT STIFFER THAN THE STOCK SWITCH . THANKS
@Beardedbob
3 жыл бұрын
Both are great so just which one you can get. I'm just editing a video comparing them so that will be out in a few days.
@L.A_Epino
3 жыл бұрын
Now I know why my GWPS rattles sometimes from around the back. Seems like the battery comes off every now and then. 8:33
@Beardedbob
3 жыл бұрын
Use more 3m tape 🤪
@L.A_Epino
3 жыл бұрын
I opened it up and the battery wasn’t taped tightly. I pushed it to the mouse’s ceiling and thought that the tape wasn’t good enough but Then I tried to remove it and it won’t come off. Looks like that’s fixed but it’s weird that it came off in the first place if it’s that hard to take it off. 😂
@bernhardaustine47
3 жыл бұрын
1:35 I was wondering if I could get this and put it on my superlight. Anyone knows?
@Beardedbob
3 жыл бұрын
It comes with the GPWSL standard. Its in the box with the cable.
@Axel-lt5jb
3 жыл бұрын
I currently have the original GPW and it is working just fine... is it worth to upgrade to the GPW X SL? I play valorant pretty competitively and dont mind spending money if it will really improve my performance in game.
@Beardedbob
3 жыл бұрын
Tricky question, imo I wouldn't unless you want one or more of these things. 1. lighter mouse without modding your Stock GPW 2. you want a white one and don't want to buy the limited edition gpw. 3. 20m Omron switches The issue I have with the GPWSL is the main LMB & RMB switches, I can't live with these stock at all. In other nice these are ok but in this they feel so wrong and, even the 50m Omrons feel better. Still you can change them so its possible to get around it.
@Ennis09
3 жыл бұрын
Man what is up with the black holes, or whatever on the scroll wheel? My copy has it too.
@Beardedbob
3 жыл бұрын
How do you mean?
@TROY-MCCLURE-1991
3 жыл бұрын
Is possible to desolder the Micro USB port and solder on a USB C port?
@Beardedbob
3 жыл бұрын
I don't know but my instinct tells me this isn't going to be possible as the pcb is designed for a micro.
@drewmott9443
3 жыл бұрын
Now my real questions how do I buy a super light? It’s sold out and probably will be for a while
@Beardedbob
3 жыл бұрын
ebay is your only hope obiwan
@Fartuch87
3 жыл бұрын
what with coating is different or the same ? black vs black
@Beardedbob
3 жыл бұрын
White is smoother, not that the black is textured much.
@Calsonic
3 жыл бұрын
forgot to ask this during the stream but how tall is the scroll wheel encoder on the superlight?
@Beardedbob
3 жыл бұрын
Np, good to see you on the stream. Its the same as the stock GPW so 8mm
@Bambalamm
3 жыл бұрын
Are the side buttons of the new one full sized micro switches?
@Beardedbob
3 жыл бұрын
No the same as the stock GPW
@celphtitled8284
3 жыл бұрын
The only thing they need to fix is the damn omron switches and ill buy all their mice. cmon Logitech its not that hard, use optical switches like Razer or something.
@Beardedbob
3 жыл бұрын
Just swap them out or send it to me and I will 👍
@apasram
3 жыл бұрын
@@Beardedbob how much?
@apasram
3 жыл бұрын
@@Beardedbob also if u mess something up are you willing to refund?
@carlogaytan7010
3 жыл бұрын
Do you think other manufacturers can learn from Logitech's construction of thier lighter G-Pro, and create even lighter versions of thier most popular mice?
@Beardedbob
3 жыл бұрын
tbh I think logitech should learn from theirs. The RnD must be through the roof... they over engineer it.
@TheMatrixxProjekt
3 жыл бұрын
I heard the PTFE part of the Superlight skates is only .2-.3mm thick when separated from the black adhesive layer. Wouldnt this wear down extremely quick?
@Beardedbob
3 жыл бұрын
could work well once you add some more adhesive they should be around 3to 4m. They will wear the same but at 2/3/4 mm they might be to low. Would have to test.
@cwill2127
3 жыл бұрын
Unless you use a hard pad you really don’t have to worry about feet wearing out IMO. Never really happened to me before. (Unless you push down into your pad really hard, then maybe on a cloth pad)
@madbros-r-us4549
3 жыл бұрын
Happy that you can interchange these because I have a ultralight shell coming in for a GPX and im planning to transfer internals from my GPXS to it and make it even lighter.
@Beardedbob
2 жыл бұрын
let us know the final weight after you make the swap.
@mauriciocs2
2 жыл бұрын
How that worked? I’m thinking of doing the same. I have a normal G Pro and am thinking of buying the Superlight case to make the mouse lighter with the least possible modifications. Mouses here in Brazil are super expensive.
@miladesn
3 жыл бұрын
why people say the scroll wheel feels different when its exactly same encoder and wheel? placebo?
@Beardedbob
3 жыл бұрын
The are the same as this video shows but it's missing the plate that puts a little more pressure on the scroll wheel hence it feels different
@alabalala
3 жыл бұрын
@@Beardedbob does the wheel still randomly activate while having it binded as "jump" in game (bunnyhopping..)? The old version has that problem.. (basically, the wheel doesn't turn for a whole step and stops in between steps, it can be seen while browsing/scrolling too..)
@KartikoKurnianto
3 жыл бұрын
Thx man
@Beardedbob
3 жыл бұрын
Thanks Kartiko Kurnianto glad you liked it 👍
@KartikoKurnianto
3 жыл бұрын
@@Beardedbob with numerous new top of the line wireless gaming mouse this year, can u make comparation video (include G Pro Wireless X Superlight, Razer Viper Ultimate, Model O Wireless, SS Aerox 3) like what u did on Ultimate Showdown Razer Viper Vs Razer Viper Ultimate vid ?
@GeekNerdNoir
3 жыл бұрын
Is it still double clicking? Or the post and pre-travel changes mitigated that for good?
@Beardedbob
3 жыл бұрын
Only time will tell but on other mice the 20m Omrons do fail with Double click
@GeekNerdNoir
3 жыл бұрын
@@Beardedbob Bob, to install Omron Japan D2F-01F you have to take away the switch plunger, then use the 50m or 20m plungers of the older switch to make it compatible, it's better than shaving off the higher plunger of the Japanese model. Ez mod.
@lucassalles3806
3 жыл бұрын
bro removing only the blue piece where the magnets on the right side (not the switches) in the normal G pro W do you think this causes an imbalance in his weight? from what I saw the superlight has nothing counterbalancing on the right side where they removed the buttons and they say it is very well balanced. I'm thinking of doing a weight reduction on my GPW instead of buying a superlight
@Beardedbob
3 жыл бұрын
Balance is tricky. You can counter it by moving the battery if it was and issue 👍
@lucassalles3806
3 жыл бұрын
@@Beardedbob thanks man, you're the best, i'm always watching the videos
@Beardedbob
3 жыл бұрын
Thanks man appreciate the support
@deanlgj9073
3 жыл бұрын
Hi sir, im using the Superlight right now and the M1/M2 are hard to press. I loved the Original clicks where the buttons were so light and responsive, the Omron 20m sort of changed the mouse for me. Just wondering what other choices do i have if i dont want to go for kailh gm4.0 or 8.0? I believe gm4.0 will be stiffer than omron 20m. Not sure about 8.0. How about Omron Japanese and Omron 10m?
@Beardedbob
3 жыл бұрын
Yeah they feel weird in the Gpwsl. You should be able to use any mechanical switch in it
@Anti3D-0
2 жыл бұрын
The japanese d2f-01f works great if you swap the small plunger with a shorter one from the chinese omrons. They're light and crisp
@nxte283
3 жыл бұрын
Great vid as usual, Would you suggest changing the stock feet? I prefer fast feet like the tiger arc 2's or hyper glides, Will the superlights feet offer similar speed in your opinion?
@Beardedbob
3 жыл бұрын
This video might help you compare stock Gpw Vs gpwsl kzitem.info/news/bejne/ln6EqaqjkqFhhmk
@blurry9744
3 жыл бұрын
I saw a thread on reddit that the GPW had updated their switches to 20mill from 50mills, on the 2027 batch and onward, is that correct? I bought a 2034 batch one here in Sweden, but I didnt really feel a differece
@Beardedbob
3 жыл бұрын
On the ones I've tested with that SN > They have all had 20m as well as the GPWSL
@blurry9744
3 жыл бұрын
@@Beardedbob Ah okay, do you know if this is true, that the 20mills are white and the 50 mills are blue colored? one comment in the reddit thread said that they had different colors, and I see that my GPW now has white ones
@blurry9744
3 жыл бұрын
also, I got a GPWSL delivered here yesterday, and that had much crisper clicks than my GPW
@Beardedbob
3 жыл бұрын
Blue 50m white 10m and 20m
@Beardedbob
3 жыл бұрын
20m in that
@flashyrun0168
3 жыл бұрын
I thought the new switches on the gpw superlight aint going to double click but why is it that u said it still going to fail?
@Beardedbob
3 жыл бұрын
This is the big question. My view is that these 20m Omron's have been in Logitech mice since the beginning of time and have failed. The new element is that these haven't been used before in the GPW range until recently when Logitech have swapped them out for the 50m Omron's. I'm certainly not confident that we wont see any issues with these switches but maybe something has changes that we aren't aware of. I'm personally changing mine anyway as I hate the feeling of the 20m's in this mouse, I preferred the 50m and I changed them.
@siiNke
3 жыл бұрын
@@Beardedbob I have Zowie FK1 at the moment and i love the feeling on clicks, never had issues. I would like to buy this logitech superlight because of its weight. I did solder my keyboards and other things in the past but i was wondering where can i buy mouse switches and is it easy to replace them. Thank you
@GhostPLUR
3 жыл бұрын
@@Beardedbob is the switch changing process more or less the same with the G Pro Superlight? I just got mine today and the left click is VERY soft feeling compared to the right click. Makes me just want to swap them out before any double clicking develops..
@TheWallace1129
3 жыл бұрын
The ending was sad tho... so the switches wont work after swapping (have to remain stock) or u just accidentally mess it up?
@Beardedbob
3 жыл бұрын
I’m not sure yet but I expect it was something I did, maybe to much heat as it’s a very thin pcb. I’ve another I’ll be testing on so we shall see very shortly.
@TheWallace1129
3 жыл бұрын
@@Beardedbob guess I’ll stay tuned. Appreciate all the work
@Beardedbob
3 жыл бұрын
np
@blueststrawberry
3 жыл бұрын
great video! are you able to do the model o wireless teardown? im trying to figure out whether different switches are used in comparison the the wired model o.
@Beardedbob
3 жыл бұрын
I have done it on steam over on www.twitch.tv/beardedbob so if you aren't already following me nip over. I'll be releasing a edited version on here though in the next week or so, just keep your eye out for it.
@kaustavkapur5532
3 жыл бұрын
the switches are the same both are 20m omrons
@coloassalchips
3 жыл бұрын
Thanks for the in-depth teardown of the mouse, you earned a like and a sub!
@Beardedbob
3 жыл бұрын
Thanks for the sub!
@yaboit3826
3 жыл бұрын
@@Beardedbob does the coating feel any different? Otherwise I’ll just get the gpw with corepads
@Yoriichii00
3 жыл бұрын
I want this mouse can u give me it ?
@Beardedbob
3 жыл бұрын
No
@axy8035
3 жыл бұрын
You cant expect anyone to give you a free 150usd mouse lmao
@jomiro
3 жыл бұрын
Nice video
@Beardedbob
3 жыл бұрын
Thanks jomiro369 glad you liked it 👍
@lplx
3 жыл бұрын
Just got superlight, this mouse is insane. Switched from Zowie FK2 (was using it since 2017). Thanks for the content, keep it up!
@Beardedbob
3 жыл бұрын
Glad you are enjoying it 👌
@Jonxij
3 жыл бұрын
any issue on clicks M1 M2?
@lplx
3 жыл бұрын
@@Jonxij Everything is perfect, highly recommended mouse!
@quakercrackers4262
2 жыл бұрын
Did the exact change, had a 2017 Zowie FK2 and changed to a white superlight. Love the change
@lplx
2 жыл бұрын
@@quakercrackers4262 Have been using Logitech for a year! Best buy for ergonomics. Charging it about 1 time in a 2 weeks (1.5-2 hours charge time), considering that I work a lot on the PC.
@HollowRick
3 жыл бұрын
So glad I was able to get a brand new G pro Wireless on black Friday for $80 the G pro superlight is a disappointment for the the price point $150 Micro USB No RGB No modular side buttons No dpi switch The only pro is the 62g without holes... Which for me is a negative as anything below 70/80g just messes up my aim and I've used the 52g Hati S I think it's personal preference and dependant on what games you play
@Beardedbob
3 жыл бұрын
GPW stock still a great mouse once the mains LMB and RMB switches are replaced.
@dandynasty7115
3 жыл бұрын
Does taking out the magnets affect balance/weight distribution?
@Beardedbob
3 жыл бұрын
It will certainly change it. I'll check the balance in the review which will be out later today or tomorrow.
Пікірлер: 158