Practical demonstration of Miata alignment adjustment! Very visually helpful ... Thanks for sharing!
@toddg2299
Жыл бұрын
Great video. I was having a hard time visualizing everything and this video helped a lot.
@Hamiibo
Жыл бұрын
This video saved me so much headache. The previous owner of my miata had the caster all messed up and caused the steering to overcenter and want to get stuck at full lock. This made adjusting everything so much more clear.
@tech-mike321
3 ай бұрын
What a great video thanks for the explanation! I finally got my Miata back on the road this week would be nice to check and adjust the suspension alignment following this video 👍
@maxszeles4809
7 ай бұрын
That was very clear and easy to understand what each adjustment does. Perfect video. Thanks
@eytonbranhan
2 ай бұрын
thanks a lot for this very clear video that explains very well how it works on a Miata NA and NB Miata ! 👍
@thatslegit
11 ай бұрын
actually needed this to reset the angles on an NA. back of the car is squatting in the negatives and one in the front tiptoeing with a contact patch of a bicycle
@chiccoka
2 ай бұрын
Amazing video. Subbed because just after watching 2 video ,I know more things about my car. I’m building my first drift car on mx5 based ford popular
@swagon5354
11 ай бұрын
thank you very much will use this knowledge at school while doing my first alignment
@immortanautomotive9221
11 ай бұрын
You’re welcome! Please subscribe it really helps grow our channel!
@toomars1301
10 ай бұрын
Excellent! Thanks for posting!
@RichardDuck
Жыл бұрын
This is really great info. Thank you!
@mrvwcastner
11 ай бұрын
Great video. I will be using my Paco alignment stands and doing my own translation before taking into my race alignment shop to get it correct and then I will put back on my stands to see how close I was so that I can reproduce later. This will help a ton. Did that car have R tie rods? I will be doing my NB on FOX with IL bushings and my Exocet on Xida XLs with V8Roadster arms lower poly upper spherical. It will be interesting to reference this video for both. My lifted NA is just a hope and a prayer I hit some equal numbers lol.
@immortanautomotive9221
11 ай бұрын
The most difficult and most important part is making sure the floor you’re using is completely level, none of the numbers will match up if your surface is uneven, also some people report slight camber variations when using hub stands like a static offset
@leonard9453
Жыл бұрын
Looks like I’m bringing my NA to y’all for my next alignment! Any local recommendations for mounting and road force balancing?
@immortanautomotive9221
Жыл бұрын
Not sure where to get that done, we have a regular Hunter balancer and don’t get complaints about it if you want to have us do it
@DessikaModus
3 ай бұрын
So the alignment order for the front is caster -> camber -> toe. However, it sounds like if I adjust my camber it will also change my caster. I've been doing a string alignment for my toe and have an angle finder I put on the rotor to get camber. I wanna adjust my camber but don't want to mess up my caster since I don't know a way to figure out the caster. If I adjust my camber to the same angle both sides will the caster then also by the same?
@immortanautomotive9221
3 ай бұрын
The reason the order is as specified above is because each has a lower effect on the previous adjustment. So changing camber will have an insignificant impact on caster
@proleisuremotorsports
Жыл бұрын
Question: I want to lower my ride height on an NA8 with coilovers. Currently running around -2deg front and rear camber, 0 toe. I'd be happy with some camber gain but am concerned the toe would change. Would going down 1 inch make it necessary to get a re-alignment?
@immortanautomotive9221
Жыл бұрын
Yeah it will be very necessary, even lowering 1/4” will throw off toe enough to need an adjustment
@nissanskylinegt1996
Жыл бұрын
A damn good video
@immortanautomotive9221
Жыл бұрын
Thank you!
@DessikaModus
3 ай бұрын
What about for the nd and nc multi link rear?
@immortanautomotive9221
3 ай бұрын
the NC/ND have separate toe and camber adjustments. They effect each other more than I'd like, but not as significant as the NA/NB
@dalp6657
9 ай бұрын
What alignments do you recommend for a Miata na in a race track ? ( no stock, 205/45/15 ). Thanks
@immortanautomotive9221
9 ай бұрын
Max camber and zero toe is a good place to start
@hunterwright386
6 ай бұрын
Showed this to the guy doing my alignment… and he still screwed it up. For $135🙄
Пікірлер: 30