"Parts breaking power!" Ha ha reminds me of Tim the tool man Taylor i love it
@knutroald5332
4 жыл бұрын
I tuned my mamba x based on your video. And it is sooo smooth and controlled. Transitioning from uhill to downhill is supercontrolled without any sign of freewheelingplay. I can even APPLY throttle going downhill with full controll👌🏼👌🏼👌🏼👌🏼😬😬🥰
@MarcoLemmetti
3 жыл бұрын
Dude you are the Shelby of electric motors. Well done 👍 I love your products
@PhilBender612
4 жыл бұрын
"Add a little Skoach right there" exactly how much is a skoach? No, but seriously, new version looks great. Great tips. Your the best John!
@MelloKingMal05
3 жыл бұрын
That was a truly southern thing if I've ever heard it 😂
@Trevinator1990
Жыл бұрын
this is EXACTLY the video i needed to see! im currently building a capra kit and had a 550 motor laying around, and found out it would not fit while trying to install it on the skid plate. i have an axe 550 xerun on my traction hobby 1/8 founder 2 and love that motor, but watching your test of the puller pro on another video, and you saying the standard fits in the capra have made up my mind on getting the puller pro 540 standard size for my capra! THANK YOU!
@GeorgiaKayakAngler
6 ай бұрын
Just ordered this motor. Can’t wait to get out and run it. I’ll be running a sidewinder 3 esc. I will update my esc later
@johnbasterson7938
4 жыл бұрын
I would appreciate an updated mamba X programming video! I just got one with a slate motor as a puller was not in my current budget! ❤ Had to update my disaster supplies and defense weapons as well!
@richardmatteo5701
3 жыл бұрын
instablaster...
@scotterwin2901
4 жыл бұрын
I have a 2200kv PP V2 and mamba X on my Capra, and had been thinking of going with a revolver. Interesting comment there at the end about wheel speed. An updated video on mamba x programing would be great.
@riverridgecrawlers9444
4 жыл бұрын
Love the motor! Shirt is bad ass too!
@donalds2982
4 жыл бұрын
Great video! I would like to see an update on how you set your mamba x!
@jonnie2bad
4 жыл бұрын
Hi, I put a Puller Pro R V2 4100Kv into my Pro-line Pro-MT 2WD and lemme tell you something. This thing is a animal, it is so fun to drive. I've had it almost 2 months now and have been driving it nearly every day. Getting ready to do it's 1st teardown and inspection/lube soon. I've been super impressed so far, no issues. Running it with a Castle Mamba Max Pro SCT on 2S with a 12T pinion (32p). It was shredding my 48p plastic gears i had to mod the tranny to take a Robinson spur for SCX-10. It had a Castle 1410 3800 Kv, it was a nice motor but i like yours WAY better. My bearing in the 1410 blew up after 4 yrs and thrashed the rotor and probly stator too, I'm in Florida....I think Ii might know why now. Still 4 yrs and never really lubed the bearing I guess I should have known better huh?
@Martyv231
4 жыл бұрын
Best motors on the market IMO. I have a newer Trail master BLE pro esc that im having troubles with. I have tried programing it multiple times on multiple different settings. The issue is when I am going down a hill and have my figure on the throttle trying go slow down the hill it just takes off on me like there is no drag brake. then as soon as I let go of the throttle the drag brake locks up like its supposed to. As long as my figure is on the throttle going down hill it free rolls. There is no down hill control just full drag break or no drag. I have multiple Mamba x systems so I am confident on my programing skills and how the systems work. Thank you
@ezmoney9261
4 жыл бұрын
thanks bro I just was looking for more info last week on them now I know I need one . I started w a 13 t brushed crawl sport then expert then REVOLVER 💥💣👍JUST GOT TRAILMASTER PRO BRUSHLESS 🤪👏🔥
@tomandrews5392
4 жыл бұрын
John hall make great crawler products the only thing I have not housed of yours is the servos ..I am starting a new build a TRX 4 Sport my esc of choice is a CC Mamba X the motor will be two HH 21 turn and CC 2850 slate but the last thing I need is a servo . I guess the last part I need is a good servo I do believe I will get a HH 500 ....great products and great support ...thanks to you and your staff ....
@rc-ingaroundamerica8792
4 жыл бұрын
Looks like another motor I need, lol, just picked up a devolver motor, and cant wait to get it in my rig
@oldgeezer3324
4 жыл бұрын
With all the information John gives us here, all my motors will be Holmes
@OswaldBeef
4 жыл бұрын
Crawlmaster sport 550 12Turn and crawlmaster sport 540 13 turn.....WOW!
@MrCoopzilla
4 жыл бұрын
JOHN I DO LIKE THAT SHIRT !
@CarminesRCTipsandTricks
4 жыл бұрын
John..... I cannot WAIT until I can get one or two of those Puller Pros!! Of course I'd need an appropriate ESC... But that's one big expense that I can't wait to be able to get!! Thanks John, sincerely! Carmine ✈🚂🚙
@CarminesRCTipsandTricks
4 жыл бұрын
STILL can't wait to be able to afford a Capra!! 😁
@jdsrcs8061
4 жыл бұрын
I have learned alot about about all of your products John!!! I have a couple of rigs that would love an upgrade from your excess inventory!!!
@stratobungle
4 жыл бұрын
Dang - I need to build my rigs more quickly... still have a NIB Stubby and a NIB PP-L 4100kv R that have to be installed! Got Crawlmaster Sports in the 540 and 550 sizes, too. Excellent electronics! As always, thanks for the video upload, JRH!
@timjohnson9406
4 жыл бұрын
Time to try a Holmes hobby motor. Great info thanks
@addamwright1733
4 жыл бұрын
Awesome as always!
@The918OBS
4 жыл бұрын
Great video on the new version
@RevolutionX
4 жыл бұрын
Very nice! I'll get around to picking one of these v2's sooner or later.
@GoProseph
4 жыл бұрын
Awesome I’m definitely gonna pick one of these up
@johnunderhill6672
4 жыл бұрын
Do you have a video for electronic set up ... start to finish? Dig servo, steering servo, speed controller, receiver radio binding?
@glipglop1
4 жыл бұрын
Thank you
@JDSTACTICAL
7 ай бұрын
Love my PP stubby but I hate its lack of drag brake.
@johnroddy931
4 жыл бұрын
Perfect video
@trpierce3497
4 жыл бұрын
Thank you for the great video especially the tips for waterproofing, reminded me that I need to pull my v1 PP3500 out of my bomber and show it some love. One quick question, do you have any plans on doing a v2 BLEpro esc?
@ronaldwriston1546
4 жыл бұрын
Great video. Would love to see a new programming update. And possibly if you could, demonstrate how you do the torque limiting test. Can’t seem to get mine to slow me to adjust torque limit
@taomicioli
Жыл бұрын
I put small grubsrews in the unused holes
@jonthomas8487
4 жыл бұрын
Does the Mamba Micro X work with this motor and if so what is the advantage of doing the regular Mamba X?
@americanmade73
4 жыл бұрын
In my experience with the MambaX Micro with a Version 1 2200 puller stubby... 5.5 lbs 9 tooth pinion 3 cell Axial scx10.2 with overdrive front diff. It's one of the smoothest combinations I've experienced. Very predictable. Plenty of grunt. The active braking down slopes is awesome too. I also added a 25mm fan over the cooling fins on the Micro. I run it in a competition environment, no water. Hope that gives you some insight.
@jonthomas8487
4 жыл бұрын
jimmy h absolutely! It’s $160 as a combo as opposed to $230 so that’s a good deal
@whitsrcleftovers2707
4 жыл бұрын
Now I'm going to need a v2... probably the snub for the ascender. Have the v1 in the trx4. Does need more drag break.
@savagemt2
4 жыл бұрын
Whits' rcleftovers im looking at the snub and mamba x for my ascender. Not sure what kv to go with. Im sure any of them will work amazing in it.
@nolaweezy6366
4 жыл бұрын
John I can’t decide between the puller stubby and revolver. I’m running a micro x. Which would u prefer?
@rcmike09
4 жыл бұрын
Could use grub screws to block the unused motor holes. And the last the life of the motor
@ryurc3033
3 жыл бұрын
Puller pro or revolver.......revolver for scx10ii, puller pro for steel tube frame .monster truck? Guess I need one of each. Saving my pennies but I will get there soon enough.
@christopheralexander6147
4 жыл бұрын
What’s this strange calming effect...are you Bob Rossing me John?
@rrdeanie
4 жыл бұрын
On a stock radio as well👊😎
@puzzleluvr
4 жыл бұрын
How would the timing adjustment on the motor vs in the ESC compare?
@MrDyna90
4 жыл бұрын
Can u go over the pro puller r 4100kv I'm so tempted to by one
@charlesswank6401
4 жыл бұрын
Man, it would be so awesome if someday you decided to scale your expertise and manufacturing skills into the 1:1 world. I've got a little Chevy Bolt in the family quiver and one old Yota truck that makes me want to go running to EV West with all the money I don't have. Stuffing reclaimed Tesla parts into cars is intriguing but man, I just can't wait for the time to come wherein we can get awesome tuner parts for wrenching on EV retrofits and current EVs. Out here in CA the unregulated ICE fun is over [rightfully so] so I'm really looking forward to the cleaner fun of wrenching EVs. When I look into current EV tech compared to RC's it can scale, at least from what I see.
@DennisBeun
3 жыл бұрын
Noob question (always used the brushed holmes motors with a 1080) I would like a Puller Pro V2 2700KV to put in my Element Sendero HD, but what would be the best ESC to combine it with. Looking also to add a little more weight to the truck, planning to run it on 3s
@oldgeezer3324
4 жыл бұрын
I pulled the trigger, I ordered this motor today I also ordered the Mamba X to control it. I DO have a question or two, a 15T 32P 3mm pinion comes with the Vanquish Ultra I ordered also. Is this a good gear for the motor? Also do I need a 3s or will the 2 S suffice?
@PhoenixRCCrawler
4 жыл бұрын
Always the info. 🇺🇸👍🏽🐒
@Himynameisadrianc
2 жыл бұрын
I have a new Puller Pro Stubby V2 1800KV and been having issues with the pinion slipping and jittering at low throttle. Really need some advise as I have not gotten support from Holmes customer support. :(
@deadlakerc
4 жыл бұрын
It'd be great if you can show a rock crawler setup for the Mamba X I bought one from you and I'm having slight troubles I run a 3s lipo and within two minutes of running it goes from 11.4 volts about 9 volts if you could show me how to set that up on a video that be amazing to fix that problem no one else has good videos on it on the Castle link setup
@mattiegrock7847
6 ай бұрын
I know this video is lil old but still amazing can u run this motor non sensorless as well my copper head 10 says its not water proof and i rather use my water proof one but its a sensorless ecu i live up north east and have a run coming up some snow and some streams and mud so i rather play it safe
@jasonsimak597
4 жыл бұрын
How does puller pro compare to standard revolver?
@grvtyboyRC
Жыл бұрын
Great video - can you confirm if the puller pro stubby supports 4S ( I thought I heard you mention voltage, but I can't find it again in the video). I also cant find any voltage specs on the website for that model. Thanks
@rodcognito002
4 жыл бұрын
Cool shirt
@CuciWaterjet
4 жыл бұрын
I really love your videos mrholmes , but it just hurts me looking at your brushless setups as I can’t afford any of them .currently I’ve got you Holmes hobby 540 brushed motor. Works brilliant . I’d like to use your revolver v2.
@brianbrigg57
3 жыл бұрын
John, rewatching this I only just noticed that you said you could get more wheel speed with the Puller 2200KV than you can with the Revolver. With the V2 Revolver available in 2500KV is this just out of date or is the Puller Pro still faster?
@gschaaf713
4 жыл бұрын
any idea when the standard size 3500kv or 2700kv will be back in stock? give me the inside scoop. can i buy one off you?
@jesusibarra3608
3 жыл бұрын
Did you get your hands on the motor? I'm looking to get rid of mine, nothing wrong with it. Is just too powerful for my liking. Thinning I should've went with a revolver or a fusion
@matthewrustia6570
4 жыл бұрын
Try to make a 390 for a barrage and other 12th scale builds
@TangoOne
4 жыл бұрын
I think the stubby 2700 is calling my name. However it will be hard to replace my Crawlmaster Pro 13t
@bradkalman2353
4 жыл бұрын
Are they waterproof and how do you waterproof them?
@-Ola-.
4 жыл бұрын
Brad Kalman watch the video.
@RichieD088
4 жыл бұрын
LOL !!.......
@DYUcycle
4 жыл бұрын
Hi, HolmesHobbies, review DYU V1 please
@jamesrodriguez7771
2 жыл бұрын
So is the 2100kv puller pro L motor the same as the puller pro 2100kv xl
@jimsparks696
4 жыл бұрын
Is it possible to design an open or skeletal can for these motors that allow for drainage and drying without frequent disassembly?
@Bigmediaproduction
2 жыл бұрын
I need blushless motor with speed and more Turk for my fms 1/12 jimny Suzuki, will also need server, transmission to go with please recommend me or direct me on how to get them
@michaelfessenden8601
4 жыл бұрын
Curious what the revolver does in the Capra. Did you do that video?
@teneridertravels
3 жыл бұрын
Agree, this would be very interesting!
@bradkalman2353
4 жыл бұрын
I'm looking for more for on and rally and touring car and buggy Motors that are fast and can be torquey.
@Boosted_Tractor
4 жыл бұрын
I want to go brushless in my trx4.. what is the best bang for buck for a trail and a little amount of rock crawling and I need it to be fully waterproof
@dumbdesign7850
4 жыл бұрын
How about the sound level? Has something changed there too? Not that I'm dissatisfied with my puller per V1. It just makes me wonder.
@GeorgiaKayakAngler
Жыл бұрын
Will a Sidewinder 3 esc run good with the Puller Pro V2 3500?
@GeorgiaKayakAngler
6 ай бұрын
I hear it won’t be as smooth without the balance wire but, will it burn anything up?
@bradkalman2353
4 жыл бұрын
I'm just curious you talked about the rubber sealed bearings are there any that are polyurethane which I think might have a higher temperature and last longer than rubber.
@GrimJerr
3 жыл бұрын
what would you recommend for a RYFT ? PULLER PRO R 540-L V2 ROCK CRAWLER MOTOR 4100KV ?
@SuperSilence23
3 жыл бұрын
Would I be ok with a 2700kv stubby on a scx10 -3 or should I go with a standard? And should I go with a 2200 or a 2700?
@cocheautosalon506
3 жыл бұрын
Which kv is better for crawling? 2700 or 1800? Is 1800 enought already?
@HolmesHobbies
3 жыл бұрын
There is no better withing the 1000 to 3500kv range, but 2700kv 4 pole is the sweet spot of wheelspeed and control. If you don't need that much wheelspeed the 2200 and 1800 is also great choices.
@yiezhe
4 жыл бұрын
i would like to know what esc is best to pair with it.
@waynemcclanahan2990
3 жыл бұрын
Hi I just got a stubby puller pro an was wondering if is ok to run in a heavy rig
@wesleyjandreau3367
4 жыл бұрын
What motor would you recommend for a scale puller?
@themountain59
4 жыл бұрын
Awesome motor but what tires are those ?
@dhstube
3 жыл бұрын
You say put the motor in the owen at 140/150 Cº?
@HolmesHobbies
3 жыл бұрын
Fahrenheit. That hot in C will burn it up
@dhstube
3 жыл бұрын
@@HolmesHobbies thanks!!!
@jordanphillips8642
Жыл бұрын
Is the 2700kv 4s rated?
@willemwilkinson6102
3 жыл бұрын
Hi I have a TRX4 Blazer what motor will you recommend for it and nessesery accessories to run with the motor if I do only crawling.
@rcmike09
4 жыл бұрын
I have a rc4wd scale aluminum 350 engine and transmission. What motor would be fit in this, while giving me power. I'm wanting to build a rock bouncer around the scale engine.
@jameskauffman8405
4 жыл бұрын
How often should you regrease
@marccyberwiz
4 жыл бұрын
Wish I bought more Holmes motors I have Tekin Roc412 1900kv in my VS410 pro with mamba x. How does the puller compare? Should I go with full or stubby on build like this. I kinda wanted revolver but I see you have pullers in stock.
@adrianharrison5208
4 жыл бұрын
I would like to see a moa setup with one of these motors also, I run a clodbuster crawler and its hard to find video setups for them...
@CarminesRCTipsandTricks
4 жыл бұрын
That's something I didn't think of! Clod Pro power!! You just need to reverse the Timing of one of the Motors. John has a Video on doing that.
@adrianharrison5208
4 жыл бұрын
@@CarminesRCTipsandTricks I have seen the people reversing the timing of mototrs before but I have not done it myself yet, thats how I found HolmesHobbles in the first place looking for such a motor
@billderas3420
4 жыл бұрын
John. Was that your new SHV500V3 servo running on the 11.1V battery too? Can you use the Mamba Micro X ESC with this combo? Benefits of going with the smaller ESC? Many thanks.
@willanderson5088
4 жыл бұрын
Looking for a new motor for my trx6. Would like to keep it about the same speed just more torque. Any suggestions?
@jimtrimble4614
4 жыл бұрын
Where can I find a good selection of pinions with 3.175 bore?
@ronschanlaub845
4 жыл бұрын
Try Robinson Racing. I ordered their 9, 10 and 11 tooth 32 DP pinions.
@gschaaf713
4 жыл бұрын
How does this compare to the trailmaster pro?
@HolmesHobbies
4 жыл бұрын
A little smoother starting, and either smaller and lighter (stubby), or more powerful for the same package (540 standard)
@gschaaf713
4 жыл бұрын
does the 4274 2100kv start smoother than the R 540-L? I bought a traction hobbies founder 2 1/8 scale crawler and am trying to decide which motor to put in.
@austinhamilton07lbz
3 жыл бұрын
Will the torque, speed and drag brake be better in a 3300 kv stubby rather than a 2700kv 540?
@HolmesHobbies
3 жыл бұрын
The larger 540 size will have more torque and drag.
@Dozern90
8 ай бұрын
Abit of an old video but il shoot my shot. Just built a truck based on the Element builders kit, Puller pro V2 Stubby and Mamba micro X2. Truck is with everything on 2700grams. It wont hold 100% it will just roll slowly. The esc is set up as Holmes recommends on his video with regards to the drag brake and such. Any tips? Did i maybee gear down to much? Or does that not affect it at all?
@HolmesHobbies
8 ай бұрын
That's the nature of the system. If you want more hold, you could gear down further if possible. Or shed some weight.
@Dozern90
8 ай бұрын
@@HolmesHobbies Cheers for the answer. I wasnt sure as none of my other trucks do this :)
@1elaijah
4 жыл бұрын
Combo deals?
@rich-lf1bm
3 жыл бұрын
That would help me, being a newbie and all.
@chm779
4 жыл бұрын
hey jhon whats the prefect esc. bec. and light but powerfull motor for a low cg comp crawler less than 7 pounds ..??
@HolmesHobbies
4 жыл бұрын
BR mini for brushed, mamba micro X or sidewinder micro 2 for brushless
@manualuserX
2 жыл бұрын
Hi john, i have your 3500kv V2 puller pro, is normal motor shaft moving up down a little bit? Please reply... thank you
@HolmesHobbies
2 жыл бұрын
just a slight amount of play is normal. They have a spring washer inside.
@manualuserX
2 жыл бұрын
@@HolmesHobbies thanks for reply john... glad to hear that
@chrismedina8825
4 жыл бұрын
Just ordered a puller pro 3300kv v2 stubby for my scx10.2 what do you recommend for my gearing? I like slow crawling but also want more trail speed.
@dhstube
3 жыл бұрын
Put a 2 speed kit in your rig
@ed0c
2 жыл бұрын
what is better revolver or puller pro v2 (2200kv?)? i want the most torque as possible. (or would crawlmaster magnum 13t be the way to go?)
@HolmesHobbies
2 жыл бұрын
Revolver, more torque density. Puller Pro, better power density. Brushed isn't as torque dense, even the magnum
@ed0c
2 жыл бұрын
@@HolmesHobbies awesome, thank you so much for the reply! much love, i refuse to buy any other motors than holmes now, they are best on market by far. (incoming order! i only wish you had some crawlmaster esc's!)
@ed0c
2 жыл бұрын
@@HolmesHobbies what would you suggest KV ? i love my 10t crawlmaster. i use 10or11tooth pinion and gear way down. im thinking 2200kv revolver v2
@HolmesHobbies
2 жыл бұрын
@@ed0c 2200 is a great choice
@ed0c
2 жыл бұрын
@@HolmesHobbies awesome ordered! thank you so much
@bigchief9345
4 жыл бұрын
Hey john so I have the the puller pro v1 stubby 3300kv I was just wondering what gearing you recommend for the motor, it is in a trx4 sport with a momba x
@HolmesHobbies
4 жыл бұрын
stock is totally fine
@matthewcostner2937
3 жыл бұрын
@@HolmesHobbies would you ever be interested in donating one of these puller motors to someone in a wheelchair I would love to have one for my trx4 but I can't afford it because of my small disability check and my kids and bill take it all I barely have enough to keep my trx4 running im glad it dont break easly lol and when it does the good upgrade parts are that bad
@NBC_NCO
4 жыл бұрын
Are you guys American made ? Or American designed?
@lylewilliams9599
4 жыл бұрын
John I am running the Mamba x with the Castle Creations 1900 KV in my heavily modified trx4 Blazer. If I was to run your Puller Pro V2 standard 2200 KV would I see some improvement in torque and speed?
@fredstemwinder6333
4 жыл бұрын
Skosh! I though that was a hillbilly term, not Georgia. My dad always called pliers, pinchers. Howabout you? Anymore hillbilly terms? LOL
@jasonsmithsrrcfun9259
4 жыл бұрын
I have a question for you it has taken alot for me to ask you if you will even read this if you would be so kind as to sponsor me for my scx10 3 rc I really want one of the best motoring the world witch you build please take your time and seriously consider what I am asking you I have spent what money I had on such a great rig... I will plaster your sponsors and stickers all over and I will tell everyone in in the world what an awsome person you are please take I to deep consideration and thank you hope well in advance.....thankyou please look out forthr little man I'll pay you if you will take pYments
@HolmesHobbies
4 жыл бұрын
Not something we can do at this time, thanks for asking though!
Пікірлер: 138