Good info on the cams. A good rule of thumb with exit hardware, any device with no manufacturers name on it belongs in the trash.
@Chirael
2 жыл бұрын
Awesome tips for every #lockboss PJ, thanks for sharing these and love the bloopers. Very cool how they allow just a tailpiece swap to change the functionality like that 👍
@LuckyStrike01
2 жыл бұрын
Getting matching parts for something can be a real headache and knowing what to type can save tons of time trying to find stuff. Good stuff to have in your knowledge toolbox. #LockBoss
@TheDavila10458
2 жыл бұрын
Never had the need to interchange any cams on any lock. But that information. And instruction is much appreciated in case I will have the need for it. Those 2 little cams made the difference of saving your customer some money. And made you look professional and versatile in your abilities as a locksmith. Live stream what did locksmiths do before live streams. #lockboss
@johnfalk6955
2 жыл бұрын
I hadn't had the need to change the Cams yet. It's good for this #Lockboss to know that they are available. Another GREAT TIP PJ!! Thank You.
@DarkEmpathy187
2 жыл бұрын
I've modified tailpieces before for applications like this in the past. Good to know they actually now make them for this specific purpose. Customers don't like to hear hundreds of $$ to replace hardware to accommodate their needs.(and the outside trim can cost as much if not more than the exit device itself) This is a great alternative.
@clksupplies
2 жыл бұрын
💯-PJ
@DarkEmpathy187
2 жыл бұрын
Great video, well done and professional. ...and then, the Bloopers 😆 😎👍
@clksupplies
2 жыл бұрын
Haha-PJ
@Hslk-Locksmith
2 жыл бұрын
Great video! The part you identified as a standard tailpiece looks like a Schlage cam to me.
@Ghost_Os
2 жыл бұрын
This was a new one for me, didn't know they made these. Definitely will be purchasing some to keep on hand! #Lockboss
@MAG162
Жыл бұрын
The von Duprin 997 trim has the ability to change function by adding or removing a small set screw in the assembly. I would Imagine these are more prevalent on Imported Hardware. Good to know and have in your kit!
@lockpickingfox
2 жыл бұрын
Haven't run into those myself, but if I do I know about them now. Thanks for the great video PJ. #lockboss
@Matttkoda
2 жыл бұрын
Thanks for the quick tip. I didn't know about these cams. #LockBoss
@adammfanning3654
2 жыл бұрын
News to me PJ,this #lockboss learned something new today. Thanks
@JoePicksLocksport
2 жыл бұрын
Excellent demonstration PJ! I was always curious about the difference between hardware and function of night latches etc. #LockBoss
@azskyking6542
2 жыл бұрын
Shhh...PJ don't tell everyone! That's a serious modification that requires special order parts! Does the #Lockfather know you're giving away trade secrets? #Lockboss Love everything you do PJ.
@clksupplies
2 жыл бұрын
Haha-PJ
@bobbykendrick2426
2 жыл бұрын
Very interesting. Have not seen this before. Is nice to know. As always great information. #Lockboss
@robertsilvasy1365
2 жыл бұрын
Thank you PJ! I have not used the cams yet, but simple idea! #Lockboss
@willardlocks
2 жыл бұрын
Great information PJ, I did not know about those tail pieces. Thanks #LockBoss
@johnkrueger7921
2 жыл бұрын
I've always found the function names of crashbar trims confusing... some sellers will call them entry and classroom. Really they always have a storeroom or classroom function, right? :-) Great video. 👍
@clksupplies
2 жыл бұрын
Most of the time they are entry or storeroom-PJ
@bradleybenson13
2 жыл бұрын
Thanks for the video PJ, I had never heard of these different tail pieces before. Thanks for putting the link as well. Like you said you can change or modify the tail piece instead of replacing the whole hardware. #lockboss
@tumblersfalllocksport218
2 жыл бұрын
I ve worked on many exit devices but never had the need to change functions but now (Thanks to you and your vids) I'll be able to do it like a #lockboss
@johnshelton6043
2 жыл бұрын
Great information to know. I won a tail piece kit now I need to look to see if these tail pieces are in it and it not need to order them. Thanks PJ. #LockBoss
@Lock_Picking_Energy
2 жыл бұрын
Great tips from the #LockBoss people !! have a wonderful day
@keithwhatley5094
2 жыл бұрын
I don't work on these particular types of exit devices that often and I really did not know this so this is great information. #Lockboss
@clksupplies
2 жыл бұрын
🙌-PJ
@billgray7914
2 жыл бұрын
I like that all that has to be done is change the cams to change the function
@mikes7471
2 жыл бұрын
Awsome !!! This is excellent info to know.. I'm trying to learn more about commercial work and this is great info to know... Thanks ... #LockBoss
@Pyrolock
2 жыл бұрын
Always good to know and remember for any #lockboss -- Thanks for sharing
@clksupplies
2 жыл бұрын
👊-PJ
@johntaylor3838
2 жыл бұрын
Great video I didn’t know about the tail pieces but I’m glad you put a video on it. #Lockboss
@kevinbacon9660
2 жыл бұрын
That’s great to know! I’ve only had to work on a handful of those, but I’ve never been asked to change the function. Still…this #lockboss will have to keep some of those tail pieces on my truck!
@clksupplies
2 жыл бұрын
👊-PJ
@johnhill4185
2 жыл бұрын
I’ve never seen these tail pieces! You just saved me some time! #lockboss
@philhart9800
2 жыл бұрын
I was not aware that those tailpiece’s were available great info I will order with my next order, great tip. PJ, unless I missed a video on this, it would be very helpful for us if you explained functions and tailpieces on Schlage ALX series locks. Also the storeroom lock in this series does not require 360 degree key rotation.#Lockboss
@clksupplies
2 жыл бұрын
Good suggestions, thank you-PJ
@Biokemist-o3k
9 ай бұрын
Thank you for the information. Really great to not have to scrap a good piece of hardware....#Lockboss
@lockmechanic
2 жыл бұрын
Man... this is good to know! Thanks, PJ! #Lockboss
@locksny
2 жыл бұрын
I ordered them months ago from you. The KC-S6 and the S9 when I noticed you stocked them 👍 #lockboss
@clksupplies
2 жыл бұрын
Awesome, thanks Jay-PJ
@gkeyman565
2 жыл бұрын
More good #LockBoss information!!!! Have a great day
@PocketWomen
2 жыл бұрын
Great information #Lockboss, thanks for doing this video, cheers
@ImGumbyDangit
2 жыл бұрын
🌵🇨🇦 Neat tip. It makes so much sense to be able to change exit hardware function buy adjusting or changing the tail piece. #LockBoss 🇨🇦🌵
@MrAmarillo8
2 жыл бұрын
Great video, PJ! It's an excellent reminder that I need to order some of each to have on hand! #AccessLockKeyLLC #HaulinBrass #LockBoss
@philherman5209
2 жыл бұрын
Great information. Thanks PJ! #Lockboss
@bestrafer38
2 жыл бұрын
I learned another new thing today , that's why i like your videos#LockBoss
@jeffhudgins9142
2 жыл бұрын
Totally unaware of these! Thanks for the information. #Lockboss
@clksupplies
2 жыл бұрын
🙌-PJ
@neilwilson8742
2 жыл бұрын
Cool info, I had no idea - but I do now! Thanks #lockboss
@groverthetoecutter7874
2 жыл бұрын
Great video pj, I've never seen these tail pieces #lockboss
@laweranceroberts5193
2 жыл бұрын
I’ve used those tail pieces before but can be hard to find the right ones for the manufacturer .if you have them that would be a perfect solution for a lot of exit trim change overs .#lock boss real life
@firefighter1241
2 жыл бұрын
I’m definitely going to be picking up some of theses. Thanks foe the tip PJ. #LOCKBOSS
@clksupplies
2 жыл бұрын
👊-PJ
@clksupplies
2 жыл бұрын
👊-PJ
@locksmithandmore9679
2 жыл бұрын
The Schlage cam and 90° cam are somewhat common but I have never come across the other one you showed at 2:45 #Lockboss
@geraldskinner63
2 жыл бұрын
I have yet to see those tailpieces. Very interesting! I saw some Best lock tailpieces once that were slightly oversized from a standard. Had to modify those to fit onto a standard mortise, cylinder which actually worked..I will grab a few of each of those tailpieces just in case..which the Locksmith God's will make happen tomorrow! Lol #lockboss
@johnneal9142
2 жыл бұрын
Great information and video, #LockBoss.
@everettc.veilleux6341
2 жыл бұрын
More "tale"ented info. Thanks PJ #LOCKBOSS
@josephleonard7880
2 жыл бұрын
Really cool video I have used those cams before on a job I love them they make it much easier for me on the job but I picked up a few more jobs because of those gems #lockboss
@odinslockllc
2 жыл бұрын
Thats new to me. Great idea. Thanks for sharing! #lockboss
@clksupplies
2 жыл бұрын
👊-PJ
@peteo4454
2 жыл бұрын
Never seen these!
@edkeel5007
2 жыл бұрын
Thanks for the useful information.# lockboss
@NateGodin77
2 жыл бұрын
Good stuff for the commercial #lockboss
@menachemkizelnik1797
2 жыл бұрын
Wow good information didn't know they exist #Lockboss
@johncastagno6920
2 жыл бұрын
Great information as usual, #Lockboss
@glnooner
2 жыл бұрын
Good info!!! Eastern Oklahoma #LockBoss
@daveaedion
2 жыл бұрын
I haven't seen these. Thanks. #Lockboss
@williamc2553
2 жыл бұрын
Great info PJ! #lockboss
@curley6531
2 жыл бұрын
did not know about cams thank you for info #lockboss
@steveschmidt7140
2 жыл бұрын
This information is great to know. #lockboss
@c.a.mlocksmith
2 жыл бұрын
#LockBoss. Never heard of them. Good to know
@alancorson5778
2 жыл бұрын
That is very helpful I haven't used them yet #lockboss
@kennethjohnson359
2 жыл бұрын
That’s great to know. Thanks PJ #LOCKBOSS
@tipsyturtle5284
2 жыл бұрын
Saves a bunch! Thanks! #lockboss
@bearsback5099
2 жыл бұрын
Great info my friend. #Lockboss
@Daniel_Eaton
2 жыл бұрын
You're an inspiration #lockboss Thanks for what you do
@clksupplies
2 жыл бұрын
💙 thank you-PJ
@DarkEmpathy187
2 жыл бұрын
You know, too bad our job entails security and covert methods of entry to a slew of areas. I could possibly see "PJ and the crew" as a new PawnStars show 😳 - 😎👍
@DarkEmpathy187
2 жыл бұрын
*Bloopers would have to be involved or I'm not tuning in. 😉
@clksupplies
2 жыл бұрын
🤷♂️-PJ
@clksupplies
2 жыл бұрын
Haha-PJ
@stephenzies8867
2 жыл бұрын
Great Video And Information #lockboss
@TexasFire
2 жыл бұрын
great info! #lockboss
@dougkimber21
2 жыл бұрын
Thanks for the information #lockboss
@davidmyers7985
2 жыл бұрын
I have modified tailpieces before but I think I will have to get a set for just in case I need them #LOCKBOSS
@davidcox9983
2 жыл бұрын
Great tip. #Lockboss
@VorfeedCorp
2 жыл бұрын
Good to know #lockboss
@curtolocknkey
2 жыл бұрын
More good info #Lockboss
@clksupplies
2 жыл бұрын
Thanks-PJ
@vernondollhopf3249
2 жыл бұрын
I did not about them thank you #lockboss
@jamesestep76
2 жыл бұрын
Exit device quick tips. I new about my making the cams myself. Pj if u could make a small kit it would b easier on me and many other lockboss. I say kit them and sell them. Thanks pj. James estep locksmith n tennessee#lockboss #lockboss
@51-FS
2 жыл бұрын
Awesome video #lockboss
@pauladen7700
2 жыл бұрын
Cool man!! #lockboss
@countrylockandkeycountrylo2034
2 жыл бұрын
Will son the first object is is take off the old tailpiece before you attempt to put the new tail piece on LOL I just got to give you a hard time lockfather
@DarkEmpathy187
2 жыл бұрын
Just call him, 'Ol Hawkeye' ... I was wondering if the LockFather saw that. 😉 But to reiterate, real life in action. These things happen. And usually at the most inopportune times 😅
@americanpatriotlockandkey2598
2 жыл бұрын
#lockboss Nice info
@assakesomanlockman7179
2 жыл бұрын
Cams and Tailpieces. CAM is associated with Mortise Cylinders. TAILPIECE is associated with Rim Cylinders. Why do I mention this? Over the years customers would call to say they had a broken Cam on the cylinder. Out to repair it and turns out to be a Tailpiece. To make this a clear understanding, here is a quick video on the difference. kzitem.info/news/bejne/zoFqr3eVaZV5raQ What your are referring to in the video are not tailpieces. They are cams. Just wanted to be clear on this.
@Nicholaspont
2 жыл бұрын
#lockboss
@davidturner6509
2 жыл бұрын
What will they think of next? I had no idea…. #LockBoss
Пікірлер: 105