Giles has some great products. I upgraded my Ender 5 Plus and 2 of my Ender 5 with the ExoSlide system. They made them the best they could be. The new extruder looks like another great solution for them. I gave all of my Creality printers away so I could have room for my Rat Rigs and Bambu printers.
@kerseyfabs
Жыл бұрын
Yep, good stuff! I hope to get one of those one day too!
@exoslide1632
Жыл бұрын
Great video Kris, you are amazingly thorough in your testing! A note on extruder motor amps, the reason for the 0.6 amps RMS or less is to keep the extruder motor under 50'C or so (if needed, the amps can be reduced to 0.5). If users have any questions, we try to answer all emails from the contact page of our website.
@kerseyfabs
Жыл бұрын
Thanks and I appreciate the extra info!
@Gix3D
Жыл бұрын
Interesting stuff. Learning plenty ahead of time as usual. Thanks Kris
@kerseyfabs
Жыл бұрын
Glad to hear it! Thanks!
@BitesizeUGC
Жыл бұрын
Another great informative video, Kris. Thanks.
@kerseyfabs
Жыл бұрын
My pleasure! 👍
@DailyFrankPeter
10 ай бұрын
Thumbs up for the yellow colour. It instantly places it along with the workhorses like CAT or JCB.
@nicksmith1415
Жыл бұрын
Hi, do you know if Exoslide are going to be easily available in the UK with out customs doubling the cost?
@kerseyfabs
Жыл бұрын
Send an email to the company directly or check the website. He may have a distributor.
@nicksmith1415
Жыл бұрын
@@kerseyfabs thanks, will do.
@TomDillen-r5o
Жыл бұрын
Nice. Love the attention to detail. Thew 5015 fan seems to come in a variety of voltages(12 and 24). Which voltage is appropriate for the Ender 5 Plus?
@kerseyfabs
Жыл бұрын
Thanks. The Ender 5 Plus is a 24V printer.
@dronefootagelivestream7905
Жыл бұрын
So curious - I watched a video you did some time ago regarding dual extrusion. Are you aware of any way to do IDEX with exoslides? Seems like it may be a great combo, especially with the extruder you just presented.
@kerseyfabs
Жыл бұрын
I haven't really looked into it. I love the idea though!
@zacharycombatarms
Жыл бұрын
If you get the chance I'd love to see what you think of the newer Micro Swiss NG.
@kerseyfabs
Жыл бұрын
I have one for the Ender 3, I need to get on there and tested.
@AndrewAHayes
Жыл бұрын
I would still like to see a video on the Hero me Gen 7 being fitted to an Ender 5 Plus, I have a Gen 5 on my 2X Ender 3's and 2X Ender 5 plus machines, I was going to wait until the threads failed to upgrade to Gen 6 with the brass inserts but I had no need to undo the screws so those threads have not had the chance to fail.
@kerseyfabs
Жыл бұрын
I completely understand. That's why I was running my Hero Me 3 for so long. It just worked so well.
@markingram268
Жыл бұрын
Great video and info my friend can I ask what motherboard and screen,fw are you running as I'm looking to upgrade and after that this system maybe the way forward
@sreed3819
Жыл бұрын
Great info.
@kerseyfabs
Жыл бұрын
Thanks for watching!
@GReadyPrints
Жыл бұрын
So cool 😎 👍👍👍
@kerseyfabs
Жыл бұрын
Much appreciated!
@GReadyPrints
Жыл бұрын
@@kerseyfabs 😉
@KyleGP
Жыл бұрын
Which LCD is that?
@kerseyfabs
Жыл бұрын
That's the Bigtreetech TFT35.
@emanuelcalderon
Жыл бұрын
Noooo. So sad.😢😢
@kerseyfabs
Жыл бұрын
It's all better now!
@fauxsoul
Жыл бұрын
It was like watching a horse run itself to death, so sad.
@kerseyfabs
Жыл бұрын
Yep. The old girl had done her best but I asked too much. 😟
@emanuelcalderon
Жыл бұрын
How fast does it print? And how well?
@kerseyfabs
Жыл бұрын
I'm printing at 80mm/s at the moment. I'm not a speed guy so I'm not sure where it would max out. If I get the urge one night, I'll try and max it out.
@goodz1219
Жыл бұрын
Oh my, that intro was hard to watch.
@kerseyfabs
Жыл бұрын
😆 All's well that ends well!
@EmptyTelevision
Жыл бұрын
I was able to get rid of the under extrusion in the start areas by switching to Prusa slicer. My Kobra Max and Ender 5 Plus suffered from the same issue until I changed slicers.
@kerseyfabs
Жыл бұрын
Thanks for the tip! I've been meaning to give that a shot!
@JonLaRue
Жыл бұрын
Dang that opening ripped my heart out. That was really sad. Lol RIP old hotend assembly.
@kerseyfabs
Жыл бұрын
I kept telling people it would be reborn and here we are!
@BenEBrady
Жыл бұрын
Great review video Kris. Thanks for all of your hard work.
@kerseyfabs
Жыл бұрын
My pleasure! Glad you liked it!
@3D_Printing
Жыл бұрын
What about bridging?
@kerseyfabs
Жыл бұрын
I didn't speak on it specifically but you can clearly see nice bridging on the cooling test. I hope that helps!
@kalvinsmith5679
Жыл бұрын
I have this extruder installed on my LK5 Pro. Neither Giles or I can figure out why it won't extrude. Tried switching drivers to no avail. I'm having trouble removing the motor so I can try running it alone to see if the motor is malfunctioning. Any tips or thoughts on these issues, especially when it comes to loosening the grub screw on the thumb wheel? It's at such an angle that i can't see the screw, just the recessed hole and I can't seem to get an allen key at the correct angle in order to torque on it.
@itayst
Жыл бұрын
Your “start-stop problems” are improper pressure advance setting. Ditch marlin and start your endeavor with Klipper.
@kerseyfabs
Жыл бұрын
Thanks for the feedback!
@Diceman83
Жыл бұрын
I was wondering about that... he didn't say anything about Linear Advance tuning. I know he's done it in the past, but it should be done for each material. Was it forgotten?
Пікірлер: 50