Article with links: www.gbgunsdepot.com/post/a-new-favorite-extar-ep9-gen-2
@CarolinaGunGuy
2 жыл бұрын
Another good overview. I've been seriously tempted to pick one of these up, but in all honesty, I've been seriously tempted to pick up about a hundred different guns over the last couple years. 😆
@elucky3fortune130
2 жыл бұрын
Give in to temptation...😎
@frodoteabaggins666
2 жыл бұрын
Under $450 you can’t go wrong.
@bobjames2312
Жыл бұрын
when i move to a more 2A friendly state, hopefully in the near future, I plan on trying to get one of these. can't have this in Mass cause 10rd mags can't fit in the magwell
@bobjames2312
Жыл бұрын
Shame a drum mag is not recommended, looks like it could be a lot of fun
@duboseq1
Жыл бұрын
This one is a must
@jonn8163
2 жыл бұрын
I’ve had my EP9 for a little over 3 years now and it’s holding up surprisingly well. 4,000 ish rounds
@Rumpleskin
2 жыл бұрын
Do you lube it? With what? Thinking of getting one..thanks
@jonn8163
2 жыл бұрын
@@Rumpleskin . I have never lubed mine in the 3 1/2-4 years I’ve owned it. The manual tells you not to. I will wipe down polymer with dry cloth after shooting and use CPL on feed ramp/barrel then wipe excess. . It’s been 100% reliable and holding up remarkably well
@Rumpleskin
2 жыл бұрын
@@jonn8163 thanks
@brandondang7156
Жыл бұрын
@@jonn8163so it DOENST need to be cleaned ? Any maintenance ?
@markrippt4677
2 жыл бұрын
I am picking up my Gen 2 Extar Wednesday! I have 2 Gen 1s. Thousands of rounds ZERO malfunctions. BEST VALUE IN THE GUN INDUSTRY PERIOD! Just to wind people up, let me say it is better than a semi auto MP5 suppressed. Lighter, better trigger, Glock mags, AR grips, LRBHO, totally closed rear side charger so no face full of gas. $449.00. Optic to run? Primary arms w/Vulcan reticle. Please just take the opportunity to have fun with it. It is a hoot.
@rutrutbella600
Ай бұрын
I'm pushing 70 i talked daughter into getting one she has issues with reg pistol i was going to put Magpul mbus 3 flip ups on it and primary arms prizm I've never put these on any carbine i have they don't slide on the rail seen them slide on for AR but not with this
@elucky3fortune130
2 жыл бұрын
Nice review. They really listened to their consumers regarding the Gen 2 upgrades. I like the history of the company and glad their EP9 is successful.
@andoreanesnomeo1706
28 күн бұрын
Nice review. Thanks. Yes. Polymers have replaced metal parts in so many applications. I have a client that produces polymer worm wheels for automotive steering systems. That’s a safety-critical application. No compromises on long-term performance.
@platoplombo15
2 жыл бұрын
The thing that prevented me from getting one of these previously were the number of upgrades I'd have to make, which made the cost equivalent to other offerings. Now I have to get one! Looking forward to the shooting vid. I've heard these are softer shooting than other blowback large-format pistols.
@jonhaugen5799
2 жыл бұрын
Glad to see that you got your hands on one of those babies 😁. Can't wait to see you guys on the range 😎.
@JS-ed2hg
2 жыл бұрын
Great review that almost looked familiar classic firearms actually partnered with a gun manufacturer producing a carbine similar to this. For those who are still going to the gun shop to purchase a firearm buying them online is the way to go, I found a woman with a FFL that lived close to me I would go to her house she would call to the background check I would sit at her computer desk fill out the paperwork in and out and I've saved Jesus thousands throughout the years. Stay and shoot Safe people.
@denniswilson1903
2 жыл бұрын
Since it is probably a 100 yard or less gun, I would like to see a red dot or green if you have that. Can't wait to see the shooting impressions.
@petermonck5448
2 жыл бұрын
This could be a true polymer wonder. 👍😎🙏
@12spies
2 жыл бұрын
Great overview. I love these things, glad to see your take on it. Range day should be a good time.
@mountainview540
2 жыл бұрын
I have had the gen 1 for a couple years. around 400 rounds through it and 1 malfunction. no recoil and I have squirrel hunted with it. it's very accurate
@rob6850
2 жыл бұрын
What does 9mm do to a squirrel?
@eastguntucky9268
2 жыл бұрын
@@rob6850 blows its lung out of its body 🤣
@rob6850
2 жыл бұрын
@@eastguntucky9268 it just might, in this case!
@mountainview540
2 жыл бұрын
@@rob6850 I used fmj. Head shot or body. It's pretty much uneatable unless you hit right in the head. My neighbor loves squirrel.
@Rumpleskin
2 жыл бұрын
@@eastguntucky9268 lol
@TwillyZXY
2 жыл бұрын
Just took mine to the range last week for the first time. Man is it a fun shooter. Recoil has a good initial jolt but is soft on the sholder, which is awesome considering how the Gen 2 brace is very thin. My wife and I had a blast with it and it ran Tula steel, and winchester brass fmj and hollow points perfectly. Remember: extar doesn't recommend reloads, aluminum cased, or +p ammo. Also careful of Norma because they are using thinner primers and they are prone to blow out on this guy. So a bit ammo sensitive but all in all, I'd say it's a great deal for this one. Looking forward to the range review!
@davidgeorge975
2 жыл бұрын
The biggest selling point by far. 4ibs!
@JohnScheppler
2 жыл бұрын
I'm so glad you finally got one of these. I'm one of those that's been asking 😁
@Jerry-Parker
2 жыл бұрын
Excellent tabletop review ! 👍 Can't wait to see it run !
@jonathanyoung7763
2 жыл бұрын
I just picked up mine from my FFL today! Put a vortex crossfire on it and a lunar 9! Can’t wait to shoot it!
@edgraves7098
Жыл бұрын
I was an adequately good boy this year so Santa brought me one of these. Put 200 rounds through it today without a problem. Really liking it so far. What a joy to shoot.
@GBGuns
Жыл бұрын
Yes it's a surprisingly soft shooter for how light it is.
@ratagris21
2 жыл бұрын
Good looking weapon. Very promising. Glad you got a chance to review one. Great table top teview. 🎩🎱🏁🎯♠♦♣♥🌼🏵🌸💙💛🔱🌻🇺🇸🍀
@waterhead1359
2 жыл бұрын
After my 2nd lumbar fusion I bought the gen 1 because it was very lightweight. The gen 2 has alot of changes less Polymer. Had 1 malfunction first round , stovepipe after that ran great . Have around 800ish rounds through it
@HarleyManRob
2 жыл бұрын
First time shooting mine. It’s a great gun and a lot of fun to shoot! Same length as my Diamondback DB 15 - 7” 5.56. Much lighter and a lot cheaper ammo!
@chaburchak
2 жыл бұрын
I couldn't decide between buying this and the new Hellcat Pro. I ended up going with the Hellcat and it's great...but now I'm probably going to order one of these too. Funny how that keeps happening... :-)
@johnwick1289
8 ай бұрын
Another great video. I purchased the E9 last week and looking forward to shooting it next to my Stribog.
@TJ-qo2xu
2 жыл бұрын
I like the steel re-enforcement in that reciever. I am slightly worried about the full mag plus 1 as the manual says NOT to load a fully loaded mag into it with a closed bolt. Optic wise I would say either good irons or an affordable red dot like SIG or Swampfox. Looking forward to the range review. Big fan of this firearm and looking forward to see how it runs.
@monk1776
2 жыл бұрын
I own the gen1 version, it's ok but being a left handed shooter the first thing I did was put an ambidextrous safety on it. The original brace did a lot of moving around but have resolved this issue. Like the version 2 handguard better maybe that's something that might be interchangeable.
@trekfortruth2841
2 жыл бұрын
Best no nonsense firearm reviews on the web!
@GBGuns
2 жыл бұрын
Thank you!
@fernandozagariello9996
8 ай бұрын
Keep up the good work 💪
@HonchoHustle901
2 жыл бұрын
I would have bought an EP9 years ago had I known they had any aftermarket support. Your weapon may have given me what I need to purchase my own. Just bought a SAR 109t so it'll be a min
@GBGuns
2 жыл бұрын
What aftermarket do you need?
@HonchoHustle901
2 жыл бұрын
@@GBGuns Not so much as a "Need" more so a want. That handguard sealed the deal. Was unsure about aftermarket triggers in a polymer chassis, and I wanted a regular buffer tube w/sba3 or sba4. So you're video answered everything
@jessepearson557
Жыл бұрын
Fantastic review thank you! 👍
@goonrooster949
2 жыл бұрын
I chose to go with a Holosun HS510C. We'll see how that sight pairs, once I have it in hand.... Gotta love waiting periods.
@All_I_can_say_is_Wow
Жыл бұрын
Well dang now I wish I hadn't ordered those drum mags. I guess my dad can enjoy them in his sub 2000.
@adlibsandmicdrops1259
2 жыл бұрын
I have the Gen 1 and was so hoping that the gen 2 would either come with or have the ability to add a folding adapter. I love the new muzzle device, fore-end and metal trigger group. I don't like the new brace.
@jordanelliott5166
2 жыл бұрын
I want a folding brace too, which originally turned me off of this. But then I came across the SBPDW brace and it’s making me reconsider.
@armsdirectory
2 жыл бұрын
I think that if someone is going for a budget build on something like the Extar, then they'll likely use a budget optic too along with a budget light - if they're so inclined. A Burris, a Swampfox, a Riton, or a low cost Holosun might be appropriate?
@Justsomeguy493
2 жыл бұрын
I dropped the Cyelee T10 on mine. $70 on Amazon, including shake awake feature. Only a few hundred rounds so far, but I can put rounds through the same hole repeatedly, and zero hasn’t budged at all.
@wbwills2
2 жыл бұрын
Looks Nice
@jameslooker4791
2 жыл бұрын
Fiberglass in the plastic polishes the metal parts when they cycle.
@bigskymt37775
2 жыл бұрын
Had my Gen-1 a couple years with close to 1000 rounds with no problems at all. It’s a great weapon. But now seeing that all metal trigger group I think I’m going to break down and buy the package. I still think the new brace is ugly as hell lol.
@timmyg000420
2 жыл бұрын
I like the previous brace better too.
@realtalk6195
2 жыл бұрын
The red logo of Extar looks a lot like the red logo of Duncan Toys. Just thought it was interesting.
@GBGuns
2 жыл бұрын
It does
@heru-deshet359
Жыл бұрын
Excellent review.
@troypierce3562
Ай бұрын
I like this as im very use to AR/M16 platforms, but not a fan of the DI gas system. Hate it! But this is direct blow back like many PCC .
@jagpilotohio
2 жыл бұрын
I love my Gen 1. I like the changes they made but I do wish they would have made a standard buffer tube assembly to make it easier to change braces without buying an adapter from Farrowtech.
@hailtothe_rooster1572
2 жыл бұрын
Is that the only thing I’d need? I have several different tubes and folding adapters
@jagpilotohio
2 жыл бұрын
@@hailtothe_rooster1572 the Extar tube is proprietary. It is not meant to be changed and it attaches in a completely unique manner. Farrowtech makes an adapter plate for $85 that allows you to use a mil spec tube and whatever brace you want. I have an SBA3 on mine.
@geraldochi7945
2 жыл бұрын
@@jagpilotohio Does the SBA3 reduce the length or just allow extending of brace?
@jagpilotohio
2 жыл бұрын
@@geraldochi7945 reduces it closed AND open. It’s much shorter closed and If you have the stock brace fully extended the sba3 may be a bit shorter fully extended but I’m not 100% sure. I didn’t take actual measurements but that’s my general feeling on it.
@geraldochi7945
2 жыл бұрын
@@jagpilotohio That is helpful info. Thank you!
@TheJHMAN1
2 жыл бұрын
I just took mine to the range yesterday, only 25 yards at an indoor range but made a ragged hole with 115gr fmj. Only negative is the brace I am going to find some padding to put on it as it is uncomfortable to the cheek. I have a Red dot on mine.
@GBGuns
2 жыл бұрын
I would not recommend modifying the brace. Folks have been charged for that.
@hvymax
Жыл бұрын
I would go with skorpion sights and lower cowitness red dot.
@NaglfarCommando
Жыл бұрын
Can you do a video on you cleaning the EP9? That'd be awesome. I'm still on the fence about purchasing this over any of the other budget pccs.
@GBGuns
Жыл бұрын
No video needed really, just wipe away any carbon buildup. This system is meant to be run without lubrication.
@NaglfarCommando
Жыл бұрын
@@GBGuns understood. Thank you.
@tyronelylesjr
Жыл бұрын
may have to buy this firearm based on the background story of owner
@gregmcmurray9593
Жыл бұрын
Great tabletop review. I would put a Sig MSR or something like that on it. I see then for $76 now. Budget gun should have a budget dot. I webt to the Extar website after watching you run the different mags though it and got a great package deal with g#n, soft case, sling 5 mags etc. I watch HO alot but actually enjoy your reviews better. Come on people it the subscribe tab.
@GBGuns
Жыл бұрын
Thank you.
@julesbruchez-theartofgrapp9646
Жыл бұрын
1. Muzzle (flash can) what is the OD ? 2. Muzzle (flash can) over all length? Also is it really just a flash can to help displace gas forward and minimize recoil? Is the opening actually large. I am interested in adding a muzzle something that has the same outside diameter to keep the same look of the gun yet stretch the barrel out another 4 inches or so, for better further out accuracy.
@GBGuns
Жыл бұрын
Adding a flash can will not change accuracy or your ability to hit at distance. All a flash can does it help direct sound forward, control muzzle flash to some extent, and provide some visual appeal.
@Andino.
Жыл бұрын
I'll go over the inside with 2000 grid sand paper just to make the action a little bit smoother but that's all
@GBGuns
Жыл бұрын
It's not a rough action so much as it is the difference between polymer on polymer and steel on steel. If you sand it you'll open up the surfaces to ingest fouling, then need lube which of course traps fouling and in the end have a very dirty gun.
@PC-vq5ud
2 жыл бұрын
Price is up slightly since I purchased mine but has steel fire control group and safety now. That justifies the price increase to me.
@heru-deshet359
Жыл бұрын
I'm about to order one for myself, but my state doesn't allow a purchase of multiple magazines. Still, Extar is charging the same for the gun with just one magazine and selling the rest separately.
@GBGuns
Жыл бұрын
Did you let them know?
@chadstan6321
Жыл бұрын
Love my EP9. My favorite gun in the safe!! Such a treat to shoot. I have the Romeo5 on mine.
@rob6850
2 жыл бұрын
Looks like a good gun, especially for the price. Where are they manufactured?
@VonGoth
2 жыл бұрын
I think he said Lake Havasu, Arizona.
@GBGuns
2 жыл бұрын
Yes
@rob6850
2 жыл бұрын
@@GBGuns so they are actually made there, not imported like ATI stuff? If so that price is even more incredible
@GBGuns
2 жыл бұрын
@@rob6850 as far as I know, yes. Theur use of polymer drive cost way down.
@rob6850
2 жыл бұрын
@@GBGuns awesome. Thanks!
@JS-ed2hg
2 жыл бұрын
I'm surprised they have not banned these braces we all know they are basically a stock in many cases retractable with nothing other than a velcro strap that can be removed but I would keep it on there. I've been eyeballing a retractable stock for my MP5 pistol variant PK what not my God they want like over $300 lol I'll buy a Franklin armory trigger for my M4 versus spending that on a collapsible brace.
@GBGuns
2 жыл бұрын
This is not retractable.
@n0xxm3rcyxx
Жыл бұрын
the only thing to replace is that buffer stop plate to steel.
@GBGuns
Жыл бұрын
Or just slap one of those GrovTec pieces on the tube if you're looking for QD points
@showtime2629
2 жыл бұрын
While I understand why so many companies use Glock mags... I wish companies would start using Scorpion mags. I just find them more appealing.
@GBGuns
2 жыл бұрын
Yes the inherent angle of Glock magazines makes them look odd in higher capacities.
@julesbruchez-theartofgrapp9646
Жыл бұрын
HO can you please tell me if the Arm Brace can be extended? I have long arms and I truly rather the gun be as close to 30” as anyway possible. Stock brace pulled back in anyway or even an extension of some sort. Thank you You seemed to know the gun the best. Gen2
@timmyg000420
2 жыл бұрын
It says you can use a silicone lubricant like WD 40 quick dry
@richardrawson3160
2 жыл бұрын
T2
@jordanelliott5166
2 жыл бұрын
If this will accept a SBPDW brace, I’m ordering one now. Can anyone confirm it would fit?
@mfredricknew
Жыл бұрын
was wanting to see the field review w/ different mags but can not find it?
@GBGuns
Жыл бұрын
KZitem hides these sometimes it seems: kzitem.info/news/bejne/o6JonKCsgZF_d6g
@DevoutJourney
2 жыл бұрын
I’ve been thinking about getting one. W the gen2 being upgraded w steel instead of polymer I think I’m gonna get one. Ideal for home defense?
@GBGuns
2 жыл бұрын
These are practical for many applications
@tombranstetter68
2 жыл бұрын
Makes me wonder is this pistol brace/sbr thing going to kill the sales for weapons like this...
@GBGuns
2 жыл бұрын
Not this one, it comes with nothing on the buffer tube.
@teamhustle9036
Жыл бұрын
Can it still take a SOB brace? I just bought one after receiving my EP9 today, please answer.
@BB-gr9hq
Ай бұрын
Thanks for not being a "snob" who would "not review the likes" of a $500 PDW.
@tonobaker601
Жыл бұрын
Can you run the Extar mags in a Glock reliably? Specifically running the g26
@GBGuns
Жыл бұрын
Yes, I've run Extar magazines in a wide variety of Glock-pattern guns.
@Bigbigpoopi
2 жыл бұрын
FINALLY! I like mine for bedside use
@richardkluesek4301
2 жыл бұрын
red dot optic
@NoNo_IStay
2 жыл бұрын
I just can't get past the plastic receiver. That ruined it for me, even with the reason why. Felt like a toy. I went with the FM9 by Foxtrot Mike for another 100 bones. Uses aluminum receivers Last round bolt hold open 5", 7", 9", and 16" options Side charging or rear charging options Glock mags as well
@jonn8163
2 жыл бұрын
I have both and the EP9 is definitely a softer shooter
@TUKByV
2 жыл бұрын
Didn't know it had a plastic receiver. Dang.
@10oner
8 ай бұрын
@@jonn8163is it tho?
@10oner
8 ай бұрын
Foxtrot mike is now only 15$ more at 465$
@micemr76
2 жыл бұрын
I hate the brace. Can I throw a sb3 on there? Can't get over all polymer receivers...not sure why
@GBGuns
2 жыл бұрын
Was it uncomfortable?
@TheRealKing1
2 жыл бұрын
Where is the next video for this ep9?
@RIPPER334
2 жыл бұрын
Can the buffer tube be swapped out with a standard tube?
@jlor7675
2 жыл бұрын
How wide is the opening under the handguard? I have a fatty suppressor (1.7") and wondering if it will fit inside.
@leosanders3784
2 жыл бұрын
What ? No drum magazine, how about the glock 33 rd magazine can it be used? Also can a red dot laser be used?
@GBGuns
2 жыл бұрын
We tested a wide variety of magazines.
@MrJdog1987
2 жыл бұрын
Will the ep9 take a m4 style stock Assembly so one could go the SBR route
@PC-vq5ud
2 жыл бұрын
My Gen 1 has a polymer buffer tube. It does not use a castle nut. I have seen another reviewer switch his Gen1 to a SB3 brace so he had to change the buffer tube.
@mid-misage3416
Жыл бұрын
Just picked up a EP9. Unfortunately doesn't come with a brace anymore and doesn't have the locating tab on back of buffer tube for the brace the sell on the accessory page. Hope to test fire it this weekend
@jameslooker4791
2 жыл бұрын
I think because the receiver is plastic it can't handle hot gases from ruptured cases.
@brandondang7156
Жыл бұрын
Hold on let me get thsi straight there’s no need to clean or maintenance?
@GBGuns
Жыл бұрын
Like any firearm you'll need to remove carbon eventually, but the Extar does not require lubrication. Simply wipe the bolt down, maybe scrape off carbon build up when it happens.
@brandondang7156
Жыл бұрын
@@GBGuns wow that’s awesome, what do you wipe down with, jsut a clean paper towel?
@GBGuns
Жыл бұрын
Yes or shop rag. I haven't needed to clean mine yet, but as a rule I usually don't clean until performance degrades, that way I know how long/far a gun can go without cleaning.
@Zach-ov1cd
2 жыл бұрын
I've been interested since the gen one but there's not enough reviews out there for the longevity of the EP9. FYI I got unsubscribed. Warn the people! Any word from Walther about a PDP with paddle mag release?
@GBGuns
2 жыл бұрын
Thanks for finding us again. It's bad enough that KZitem hides us, but unsubscribing folks is terrible!
@Zach-ov1cd
2 жыл бұрын
@@GBGuns Hadn't seen anything from you in a while, went to check your channel and there was 5 videos I never saw notified. Then I noticed I was unsubscribed. That's just mean man! Thank you for all yall do.
@TwillyZXY
2 жыл бұрын
There's a guy on YT who has an 8 thousand round review of the Gen 1. Says it still runs and isn't broken. I'd say that's good enough of a test for me!
@mrshort2379
2 жыл бұрын
I personally dont think EXTAR doesn't get the Credit they deserve. I myself love the ETAR EP9 I just wish I wasn't "a poor" and obviously a pathetic useless loser that could afford the low valued price of the Extar. which outside of HiPoint is the cheapest priced PCC on the market especially with the features you get with the EP9
@erockoutdoors633
2 жыл бұрын
👍🇺🇲
@davydav9953
Жыл бұрын
Can I get this please?
@GBGuns
Жыл бұрын
Are you asking permission?
@davydav9953
Жыл бұрын
@@GBGuns yes dad
@GBGuns
Жыл бұрын
Are you over the age of 21, not a felon, and living inside the Constutuional United States?
@davydav9953
Жыл бұрын
@@GBGuns not a felon, live in Oklahoma and 27
@GBGuns
Жыл бұрын
As far as I know it's legal in OK
@10oner
6 ай бұрын
These things feel so cheap and gritty.
@JohnScheppler
2 жыл бұрын
ADE Red Dot keep inexpensive and American companies
@GBGuns
2 жыл бұрын
The ADE's are made in China though like all the other red dots.
@JohnScheppler
2 жыл бұрын
@@GBGuns I thought ADE was based in Oregon but I'm sure just everything produced in China.
@GBGuns
2 жыл бұрын
@@JohnScheppler they are based in Oregon, just like Sig Optics, but just like Sig optics it's all made in China
@erockoutdoors633
2 жыл бұрын
@@GBGuns I've seen conflicting info on this. Some are made in China, some are rebranded Vortex, some are made in the Philippines, and some are assembled and/ or made in the USA (military contracts). Either way, I've had good experiences with Sig so far.
@RRamm58
Жыл бұрын
You ONLY get 1 mag now !!!!
@n.r.9468
9 ай бұрын
@n.r.9468 0 seconds ago its cool but i dont know about it 1 year warranty what you think about that?
@GBGuns
9 ай бұрын
I think if someone can afford to wear it out they can probably ably afford to replace it.
@n.r.9468
9 ай бұрын
@@GBGuns appreciate the honesty!
@GBGuns
9 ай бұрын
It's kind of like the AR barrel coating arguments. People want to debate which lasts longer so they can decide if they're going ot spend 40-50 dollars more. If you can afford to wear out an AR barrel you can afford to replace it!
Пікірлер: 161