Great design. There is a guy in the US who I follow and he has used that aluminium extrusions for all of his interior! Keep up the content, I love the way you carefull think things through and your attention to detail is excellent considering its your first conversion. Well done.
@OurVanPlan
3 жыл бұрын
Thank you, really appreciate it 😊
@PaulEvans-j7h
Жыл бұрын
This has gone onto my shortlist of design ideas. I like a fixed bed but it uses space so a compromise that converts really quickly is a winner
@OurVanPlan
Жыл бұрын
Yeah that was our thinking too. It’s so quick to get out and put away it’s never become a chore
@AndyCamTVProduction
5 ай бұрын
I’ve looked at many pull out bed videos and this is the best I have seen and a simple design. Good to see the way you had to adapt the design. Great and thank you.
@OurVanPlan
5 ай бұрын
Thank you glad you like it and found it helpful. It was quite complicated to think about but it worked out really well.
@stefanaas1455
2 жыл бұрын
Nice video and good ideas. Maybe a tip for placing the beams, first drill the holes in the wood and mark the rivnuts through this.
@pianomanjc3
3 жыл бұрын
I really like your approach. Very systematic and practical. Your idea of the expanding bed slats has really got me thinking. We have so far planned to use the IKEA solution (ie non expanding) in our L3 model but the aluminium extrusion idea is compelling. Just a thought, given that you have a whole double mattress, where will that be stored when you’re in ‘day mode’?
@OurVanPlan
3 жыл бұрын
Thanks 🙏 It’s certainly a light weight and strong solution. I think if we had an L3 we’d probably go for a fixed bed but it certainly gives more flexibility. Re the mattress, we’ve subsequently cut it in half so it stacks one on top of the other when we’re in day mode.
@MrMeltedwellies
3 жыл бұрын
Hi Guys just watched your video on the roof slats could you tell me please were you brought them please Mark ATB
@OurVanPlan
3 жыл бұрын
We got the pine from Sydenhams at Wickham in Hampshire. To be honest the quality wasn’t that great as a lot had splits in. We’ve subsequently been recommended Champion Timber so they might be worth a try.
@MrMeltedwellies
3 жыл бұрын
@@OurVanPlan thanks so much ,keep them coming i have same van ATB Mark
@sofiacabello5313
Ай бұрын
Hola! Como hiciste para perforar el listón del lado del portón lateral? No molesta en el riel del portón??
@Dickie2702
29 күн бұрын
If you want to mark rivnut locations on to wooden batten simply take a piece of the corresponding size threaded rod ( or some spare bolts) cut into 1in lengths pop them in a drill sharpen to a point. Then screw the pointed bits of all thread into the rivnuts, to mark the wood simply align it level it or what even takes your fancy and push it firmly against the points, voilà, perfect marks for you to drill out your holes. Top tip: Mark the outside face of the wood as I guarantee the holes won't line up if the batten is ar$e backwards. Nobody can drill a perfectly plumb hole with a hand drill. If you are using rivnuts through your build, these sharpened bits of threaded rod will come in handy on lots of occasions. I'd also advise using an adhesive to help anything you are attaching to your van. No threaded fixing is immune to vibration personally id use a thread locker on rivnuts. For gluing, a hybrid polymer product like CT1 or Adiseal would be perfect, they have amazing holding power and remain flexible.
@OurVanPlan
29 күн бұрын
Thank you, great advise and definitely would have helped throughout the build if I were to do it again 👍
@MegaElasticBand
4 ай бұрын
Thanks for the video! Great design and after picking up an l2h2 relay I'll be using this video as a guide to build my bed. Just a quick question, did you add the vertical supports under the bed for strength or was the aluminium extrusion enough to hold your weight?
@OurVanPlan
4 ай бұрын
Thank you. Glad it’s helpful. I did add them as additional strength but I reckon they’re not technically needed. More peace of mind.
@escapethematrix1632
19 күн бұрын
Nice work. Im going to adapt this for my SWB transit high top. Thx for the vid 👌👌
@OurVanPlan
18 күн бұрын
Thank you. Glad it was useful.
@denimfopdemaan7295
2 ай бұрын
this is a great pull out bed design! We are in the middle of our L3 camper build and have some detailled questions about the design. I hope you still read these reactions and might want to answer our questions. The aluminum carriers seem strong and thin, where did you buy them? The part that slides out must be smaller than the fixed part as the moving carrier been hits the fixed part on the inside of the fixed bed. Still in the van tour video it seems that you have two equal size mattresses. What is the size of the fixed bed and of the part that you extend the bed with? Are the madrases both a bit smaller than the size of the fixed part? Thanks and enjoy your beautifull camper van!
@OurVanPlan
2 ай бұрын
Glad you found the video helpful. The aluminium extrusion is from RS Components. Each half is basically the same size as the aluminium sits right next to each other when closed. I did build an extension piece at the back that goes into the doorway to give more width. The mattress isn’t equal. The one nearest the back is a bit wider (maybe 10cm) including the additional bit I mentioned. When they stack the front one that goes on top sits a bit back vs the back one that stays put, if that makes sense. The challenge is with the cutouts as that restricts how wide each part can be.
@stevesimpson5417
3 жыл бұрын
Brilliant, once again, love your videos, so inspiring, I've just changed my plan for the bed after seeing this. What is the Sq dimensions of the aluminium struts you used?
@OurVanPlan
3 жыл бұрын
Thanks Steve, glad you like them. The aluminium is 40mm square. From RS components.
@adrianye7977
5 ай бұрын
Very good video! I am 179cm tall, what is the actual usable length of your bed?thank you!
@OurVanPlan
5 ай бұрын
Thanks. It’s a full length double mattress so 190cm. I’m 180cm and plenty of space.
@kennorth6958
3 жыл бұрын
TOP VLOG Guy,s & looking forward to viewing the future build progress 👍
@OurVanPlan
3 жыл бұрын
Thanks Ken
@homegrowndrone2804
3 жыл бұрын
Top work as usual. Recently started a Citroen Relay L3H2 - using aluminum extrusion for the cabinet & kitchen framing. Great material to use. 👍
@OurVanPlan
3 жыл бұрын
Yeah wondering if we could have used it more. Someone I know is using it for kitchen etc then ply lining. Working v well.
@Jane-l7v
17 күн бұрын
Hi - just found your channel - loved it! Really liked your idea for the bed using aluminium extrusion. Please could you give some more details of what you used and if possible a link? Much appreciated 😊
@OurVanPlan
17 күн бұрын
Glad you like it and it’s helpful. I used 40mm extrusion from RS components. I did paste the order details into another comment on this video but can’t copy and paste here.
@Jane-l7v
16 күн бұрын
@@OurVanPlan thanks so much for your reply. Wish you well for all your travels
@clarkspiemuncher
24 күн бұрын
doing a great job. do you have a link to the aluminium extrusion you used and the size please
@OurVanPlan
24 күн бұрын
Thanks. Not a link but it was from RS Components.
@giovannimilan626
Жыл бұрын
dummy/rookie question - with the bed of this height, how can you open the back door from the inside? did you leave space for that?
@OurVanPlan
Жыл бұрын
Yeah there’s a gap as the bed doesn’t go right up to the door so can get my hand down to open the door no problem.
@Theflyinghoneybadger
9 ай бұрын
I’ve been looking everywhere for a design like this. Did you leave those wood supports in underneath or were they just there while you built it. I want to keep the underside open for storage.
@OurVanPlan
9 ай бұрын
It was 40mm extrusion from RS components. I kept underneath as open as possible but as I have a seat, boiler storage, water inlet and batteries there are a lot of uprights. You’d definitely need some under each fixed part of extrusion.
@xanaharmsen4014
5 ай бұрын
Hi! What type of wood and size did you use for the slats. Looks very well designed, well done
@OurVanPlan
5 ай бұрын
Thank you. The slats are pine (spare from our ceiling) and they’re 18mm x 75mm. I reckon we would have been ok with 12mm thickness.
@AboveGroundLevel.
4 ай бұрын
Hi. Nice design of the bed. Can I ask what size / thickness of the aluminium bars used? Do you happen to have a link to the 4 x bars used? Many thanks.
@OurVanPlan
4 ай бұрын
They’re 40mm aluminium extrusion and I got them from RS Components.
@AboveGroundLevel.
4 ай бұрын
@@OurVanPlan thank you kindly. They look more solid then the aluminium struts people use from ikea. Especially when designing a sliding bed style.
@chips118
4 ай бұрын
Brilliant video and easy to follow. I do have a question, I'm looking to do a similar design but I was thinking about having the bed so I could slide it both ways. So the "Day Mode" could also be in the further forward position allowing a larger garage space if needed. I can't seem to find videos of anyone doing this, wondered if there was a reason you decided not to? Thanks!
@OurVanPlan
4 ай бұрын
Thanks glad you found it helpful. I’m not sure how what you’re describing would work because at night you’d need to slide the bed back so you couldn’t use the additional garage space. That’s if I’ve understood it right!
@chips118
4 ай бұрын
@@OurVanPlan Sorry not sure i was clear. I think I actually sort of figured out the answer realising that obviously for you guys when you travel, you would always have it as a double so that's what you mean by having it back at night. However the difference is I'll be solo travelling mostly and if I had both slat sections as slideable, I could position it as a single further forward if I needed a bigger/taller garage space.
@namastesteven5655
Жыл бұрын
Can you send a like as to where you purchased the aluminum extrusion and what size did you use? Please!
@OurVanPlan
Жыл бұрын
It was from RS components and was 40mm
@daveacaster4390
Жыл бұрын
What aluminium bars did you use, and where did you get them from please??
@OurVanPlan
Жыл бұрын
They’re 40mm extrusion from RS Components
@AndyCamTVProduction
5 ай бұрын
Sorry have a question now, what height do you have from the top of the mattress to the roof, can you sit up in it. Thanks
@OurVanPlan
5 ай бұрын
I dont have the height to hand but I can sit up in bed no problem.
@simonmartin4055
3 жыл бұрын
I like the bed design guys and great use of the aluminium extrusion 👍🏻
@OurVanPlan
3 жыл бұрын
Thanks Simon 👍🏻
@mrcarl5481
2 жыл бұрын
I like this bed solution and found your video searching for extending beds. I'll be travelling 50/50 alone or with someone else so was thinking of having something 2/3 size double permanent bed, but to extend out to double. So not quite half half. Can you tell me the height you made this and where you fixed it, what height do you get garage space wise? Thanks for great video 👍
@andygoulding9402
5 ай бұрын
Hi, we're did you get the aluminium bars etc.
@OurVanPlan
5 ай бұрын
From RS components
@TheMrpickle1
28 күн бұрын
Hi love the retractable bed. Do you have a link to the aluminium extrusion please. Over time does it wear the wood down then start to stick ? Thanks ste
@OurVanPlan
27 күн бұрын
Thanks. The extrusion is from RS Components and have had no trouble with it wearing down or stopping sliding. It’s like it was when it was new!
@TheMrpickle1
27 күн бұрын
Thanks for responding
@namastesteven5655
Жыл бұрын
Hi what length m6 bolt did you use to secure the slats.... Thanks I'm advance
@OurVanPlan
Жыл бұрын
They weren’t very long maybe 30mm
@namastesteven5655
Жыл бұрын
@@OurVanPlan thank you getting back to about to mimick your bed build but ordering everything in at once
@stevewinstanley2686
3 ай бұрын
Great idea, where did you buy the aluminium extrusion and nuts? Thanks Steve
@OurVanPlan
3 ай бұрын
Thanks. It’s from RS Components.
@stevewinstanley2686
3 ай бұрын
Cheers
@markwhitney8458
9 ай бұрын
Great video can you tell me what size alluminion extrusion you used for the bed and whete ypy got it from many thanks mark
@OurVanPlan
9 ай бұрын
Hi Mark, it’s 40mm extrusion and I got it and the connectors from RS components
@markwhitney8458
9 ай бұрын
@@OurVanPlan that's great have a lovely Christmas guys thank you
@stephenbrowning921
7 ай бұрын
what size was the aluminium please i love the bed and am looking to do same
@OurVanPlan
7 ай бұрын
Thanks. It’s 40mm extrusion from RS Components 👍
@Yahoomediaclub
2 жыл бұрын
Great Idea...we have L1H1..mmm got me thinking now on this great idea..
@clarkspiemuncher24
2 жыл бұрын
do you have a later video, once you have cut the matress down the middle and showing how you make it a smaller unit
@ant_hart
3 жыл бұрын
That playdoh idea is absolute genius! I’m havin that!lol 👍🏼 top work
@Theflyinghoneybadger
9 ай бұрын
What size extrusion did you use?
@OurVanPlan
9 ай бұрын
40mm from RS Components
@life-with-the-bridges
Жыл бұрын
Absolutely brilliant video! Had this idea in my head and didn’t know where to start! Now I do! So thank you!
@OurVanPlan
Жыл бұрын
Fantastic! Glad it helped!
@200ajg
24 күн бұрын
Very interesting thank you. Can you tell me more about the aluminium extrusions please? We were going to use the ikea struts that are often see on bed builds but yours look better! What size dod you use and where did you get them? Any other tips ? Thanks
@OurVanPlan
23 күн бұрын
Glad you found it useful. The extrusion is 40mm from RS components and they sell it and all the bolts and adapters and stuff. It was definitely worth doing this way as much more sturdy. No other specific tips really, if you follow what I did you’ll be grand.
@200ajg
23 күн бұрын
@@OurVanPlan thanks so much!
@200ajg
23 күн бұрын
@@OurVanPlan oh I just looked on that website…lots of 40 mm…could you specify exactly which one please? Maybe post the link for the exact one? Many thanks
@OurVanPlan
20 күн бұрын
It was a long time ago but just dug out the confirmation email: RS PRO Strut, 40 x 40 mm, 8mm Groove , 2000mm Length Stock no.:761-3313 Qty:4
@torabian02
10 ай бұрын
Great idea but 2 questions: 1) Do the square edges of the extended slats ever catch on the bottom of the foam when you are collapsing it into 'day mode' ? (I was thinking rounded slats would less problematic) 2) In 'day mode' there is very little air flow between the slats. Is this a possible mould concern on the bottom of the foam ? (Probably more for when the van is not in use)
@OurVanPlan
10 ай бұрын
No to be honest we haven’t had an issue with the slats catching the mattress nor any issue with damp. I think there are still small air gaps which help.
@Wezjob
Жыл бұрын
I am currently building a L2H2 Boxer. Just curious is the aluminum extrusion you used 30X30 or 40X40? Love your build btw!
@OurVanPlan
Жыл бұрын
Thanks. It’s 40x40. Good luck with your build.
@dalison1
Жыл бұрын
Great video and great design. Do you have a link for where you purchased the aluminium extrusion and was it 40x40. Thanks
@OurVanPlan
Жыл бұрын
Thank you. It was from RS components and yes is 40x40mm.
@Sarah_Serg
9 ай бұрын
Great video and explanations - thank you. I am planning to do something similar in my Crafter. Could I ask where you got the aluminium extrusions from or if you have a link even better! Thank you.
@OurVanPlan
9 ай бұрын
Thanks, glad you like it. I got the extrusion from RS Components. Ordered online and delivery was straight forward 👍
@hikerdoc6771
2 жыл бұрын
I did a similar build, making a bed that has pivototing sections around 5x 1" 10G aluminium tubing. It converts from bed to seat, but also slides out the back when needed. Both of us have hit upon the idea of having more living space when the bed isn't needed. Great job, well done. 👍
@OurVanPlan
2 жыл бұрын
Sounds good! It really does make a big difference having a bit of flexibility.
@sludgeb
11 ай бұрын
Nice work again particularly framing the cutouts for the bed. I'm elevating my fixed bed to allow the storage of two bikes in the garage area, need clearance of 950mm in garage area for my plan.
@OurVanPlan
11 ай бұрын
Thanks. Yeah we definitely couldn’t fit a bike in our garage unfortunately.
@AJBAdventures
3 жыл бұрын
Fair play bud, brilliant idea with the bed, and will be super strong with the aluminium box section 👍 we're van shopping now and looking at going for a medium to short wheel base high roof transit sp this idea may just he an option for us !
@OurVanPlan
3 жыл бұрын
Thanks, and good luck with your build. It definitely gives the flexibility of space in a shorter van and isn’t really too much hassle to open in the evening and close in the morning.
@moskaski
2 жыл бұрын
Another brilliant job,, you should be getting way more views on your build, your workmanship is top drawer. You may or may not find your bolts going into tie extruded aluminium loosen over time, put a drop of loctite 242 on them if they do.
@OurVanPlan
2 жыл бұрын
Ah thanks. Appreciate that. I guess it’s just how the algorithm works. I did wonder about the bolts but good shout on the loctite 👍🏻
@andrewtitterton5677
3 жыл бұрын
Hi I am also converting a Boxer L2h2 could I ask what size timbers you are using for the bed as it looks quite substantial
@OurVanPlan
3 жыл бұрын
Ah cool, the L2H2 club is very exclusive! The bed slats were made from leftover wood from the ceiling so they’re 18mm x 75mm pine. Probably a bit overkill but they do flex a bit when you get on and off the bed, so glad of the extra strength.
@catsnotkids4900
Жыл бұрын
Awesome bed! What bit did you use make the m6 bolts sit flush on the slats and the face plate? It’s shown when you are constructing the faceplate but I wasn’t able to catch what it’s called.
@OurVanPlan
Жыл бұрын
Thanks. I think we just used a big countersink drill bit and then drilled the 6mm hole afterwards.
@steedyvlogs4342
2 жыл бұрын
Hey, thank you for your easy explanatory video! i dont have the metal slates but we do have some sturdy wood planks, would it work still to do this with them do you think? Kind regards! thanks again!
@OurVanPlan
2 жыл бұрын
Yeah I think this would be ok if they’re rigid and would take the weight. Ultimately our metal is resting on wood so arguably the support is the more important thing!
@duncanpenfold5793
Жыл бұрын
This is a fab idea. But you haven't mentioned where you got your Alluminium extrusions from or dimensions of the wood used etc.
@OurVanPlan
Жыл бұрын
Thanks Duncan. The extrusion is from RS Components and the wood is 18mm x 70mm.
@ifell3
Жыл бұрын
Came over from Nate's channel, awesome design!!
@OurVanPlan
Жыл бұрын
Welcome and thank you 🙏
@anthonybrown7959
11 ай бұрын
Great job lads showing all your mistakes along the way. Takes guts. Great build quality.
@OurVanPlan
11 ай бұрын
Thank you. Good to be honest about these things.
@volvot5boy
6 ай бұрын
What a great design, do you have a link k for the extrusions and the fixings please as I’d love to incorporate this idea into my van. Thanks
@OurVanPlan
6 ай бұрын
Thanks. They’re from RS components so check on there. 40mm extrusion.
@christheuws4514
3 жыл бұрын
Love your van build videos. Whats the size off the 2 big pieces you using for the bed support?
@OurVanPlan
3 жыл бұрын
I think they were 38x89 CLS timber.
@pmckeown38
11 ай бұрын
I wondered if the bed could have been mounted to the van somehow, rather than wood screwed to the van. Did I see that the support for the slats is held in by 4 small screws after all those heavier fixings where used to mount the wood beam to the van.
@OurVanPlan
11 ай бұрын
Yeah probably. I’d def design it differently now it’s done as you learn so much after the event! But to be fair the wood that the bed sits on is solid and has no problems or felt no give at all.
@Photostoryhr
Жыл бұрын
I guess you do not put any insulation where the bed is, in order to get 200cm width. Is that right?
@OurVanPlan
Жыл бұрын
Minimal insulation. So we had the 6mm closed cell foam insulation stuck on the metal and then the wood cut outs had silver foil insulation on. We don’t notice any major cold.
@theokaralenka
Жыл бұрын
Nice idea and great explanation! What are the dimensions of the bars? Width and thickness? Thank you for sharing!
@OurVanPlan
Жыл бұрын
The metal bars are 40mm aluminium and the wooden slats 75mm x 10mm (possibly 12)
@theokaralenka
Жыл бұрын
@@OurVanPlan Thanks! I am about to start making a similar bed and was a bit worried whether 10mm for wooden slats is enough
@MultiOutdoorman
11 ай бұрын
You could have drilled the wood first, offered the drilled pieces up as a guide . the same holes used to drill into the metal for your rivnuts !
@OurVanPlan
11 ай бұрын
Yeah but I wanted to use existing holes where possible. Your suggestion would be a lot quicker though!
@MiMi-fh7ul
Жыл бұрын
Question the name of the aluminium bar an where to find them to buy thanks in uk Watford London and the length you used many thanks great idea
@OurVanPlan
Жыл бұрын
They were from RS components and 40mm aluminium extrusion. They do all different types. I think the cut length was about 1.5m
@mikesampson4104
Жыл бұрын
That is excellent.. impressive 💯👍🏻😊
@OurVanPlan
Жыл бұрын
Thank you 🙏
@Silvestmentpms
2 жыл бұрын
Super and simple way to add the double bed Excellent ida. Looking forward to the next video 👍👏
@OurVanPlan
2 жыл бұрын
Thank you
@infamous7676
2 жыл бұрын
Impressive looks like a quality job thanks for sharing.
@OurVanPlan
2 жыл бұрын
Thank you, glad you liked the video.
@drenglish8420
3 жыл бұрын
I love your attention to detail, creative ideas and explanations of how and what you want to achieve. I can't wait to see the finished product. I might just poach an idea or two!! Keep up the good work, you'll have a cracking van build.
@OurVanPlan
3 жыл бұрын
Ah thank you. Appreciate that and feel free to poach away 😊
@bobbyfischer6786
2 жыл бұрын
Very helpful video in attaching the structure with bolts to the side... I particularly enjoyed the determination in your face as you tightened the bolt!! Good on you for solving each problem as it presents and finding solid but tasteful solutions
@OurVanPlan
2 жыл бұрын
Thank you, yes mixture of strength and dreading it not to work 😂
@DiscoveringSpain
Жыл бұрын
Awesome idea! Will be doing the same on my van, I will drill the wood first with a smaller drill & hold it up & drill through that into the metal.
@OurVanPlan
Жыл бұрын
Thanks, sounds like a good plan!
@lover2dstars
Жыл бұрын
We are really liking the design in the recess, where did you get this from?
@OurVanPlan
Жыл бұрын
It’s just vinyl flooring. Can’t remember the exact name but I think I ended up getting it on eBay.
@andrewbennett137
2 жыл бұрын
What sort of aluminium tube is that ? I thought it would bend with 2 people on it ?
@OurVanPlan
2 жыл бұрын
It’s aluminium extrusion 40mm so quite thick and certainly impossible to bend! It’s less of a tube but more of a frame eg not hollow but has some structure inside it.
@Poontang123
Жыл бұрын
Amaze balls
@NomaddUK
2 жыл бұрын
Well done. Very well thought out and explained. I am sure you and your partner will have some great adventures.
@OurVanPlan
2 жыл бұрын
Thank you, roll on Spring and our first trip!
@greatescape7735
2 жыл бұрын
Brilliant! Thanks 👍
@steely426
20 күн бұрын
Super in love with this. I have my first van and want to do a similar idea. Where did you get the metal beams??
@OurVanPlan
20 күн бұрын
Glad you like it. They were from RS Components. 40mm aluminium extrusion.
@steely426
20 күн бұрын
@@OurVanPlan mate I love it definitely the best l2h2 build out there 🥰 thank you mate.
@steely426
20 күн бұрын
@@OurVanPlan also red components is very close to home for me 🥰
@steely426
20 күн бұрын
@@OurVanPlan I’m guessing it was the 2000mm?
@OurVanPlan
20 күн бұрын
Aww that’s really nice of you to say. Thank you 🙏
@FossilOak
Жыл бұрын
Brilliant idea. Love the walk throughs and the detail you are providing.
@OurVanPlan
Жыл бұрын
Thank you glad you like them 👍🏻
@gurgelmarcus
2 жыл бұрын
Great design! Hugs from Brazil!
@OurVanPlan
2 жыл бұрын
Thanks Marcus 😊
@jasonbillington3923
3 жыл бұрын
your videos are great and the workman ship is amazing. Do you have a link for the metal for the bed please.
@OurVanPlan
3 жыл бұрын
Thanks Jason. I got it from RS components. Can’t remember exactly what they call it but it’s on their site.
@jasonbillington3923
3 жыл бұрын
@@OurVanPlan Perfect thank you, I look forward to the up coming videos, I'm interested on how you built the frame around the bed both sides on the panels.
@christinee3126
Жыл бұрын
Was going to use the ikea struts but now I've seen this i think the aluminium extrusion is better. I assume you can easily screw a facing board onto the end one using the special nuts?
@christinee3126
Жыл бұрын
Just seen that's what you did!
@OurVanPlan
Жыл бұрын
Yep 👍🏻 we had to carpet it to hide the bolts but you could probably glue a finished surface to it if you didn’t want to use the carpet.
@jonathandilk5722
2 жыл бұрын
Brilliant love the bed idea looks a quality fitting. Well done
@OurVanPlan
2 жыл бұрын
Thank you 🙏
@LornaMcGregor-yv2zk
Жыл бұрын
Love the bed and thinking of doing this in my L1H2 transit. What did you use to secure the fixed frames to the wood and also, how did you secure the smaller piece of wood that the extrusions slide on?
@OurVanPlan
Жыл бұрын
Thank you. We used the fittings for the aluminium extrusion to attach to the wood in all places. The slats are screwed into little M6 nut things that slot into the extrusion. The fixed part is attached using L brackets and the nuts that slot into the extrusion. Probably haven’t explained it well. But it’s all from RS components.
@LornaMcGregor-yv2zk
Жыл бұрын
I don’t think I explained myself properly 😂 I mean the smaller pieces of wood on the sides of the van they are attached to the large piece. So the part where the edges of the extrusion slide along. I k ow you bolted the larger piece with M8 nuts and rivnuts but how did you secure the smaller piece as it seems to me to be taking the weight of the bed. Sorry, complete novice here and I need told step by step 😫
@OurVanPlan
Жыл бұрын
Ah ok we just glued and screwed those in (with a lot of screws!) but also the frame for the bench seat etc also buts up underneath to provide some vertical support.
@BennyLodestar
Жыл бұрын
best bed build I've seen, well done fellas.
@OurVanPlan
Жыл бұрын
Thank you 🙏
@roblynch6501
2 жыл бұрын
Love this bed idea
@jimdicko1483
2 жыл бұрын
Brilliant build. Your conversion is so so much better and thorough than so many KZitem conversions. Could you tell me what the aluminium bars are you’ve used to make the bed?
@OurVanPlan
2 жыл бұрын
Thanks Jim, appreciate that. The metal bars are from RS Components called RS Pro Strut 40x40. Hope that helps?
@jimdicko1483
2 жыл бұрын
@@OurVanPlan legend. Thanks a lot.
@davidfarrell3666
2 жыл бұрын
I love your videos and appreciate your answer on the RS Strut, could I ask where you got the M6 adapters from and what screw did you use to connect the slat to the strut. Many thanks! David
@OurVanPlan
2 жыл бұрын
The adapters that slide into the strut and are screwed into are from RS components and the bolts are just from screwfix. Adapter details: RS PRO Fixing & Connection Element T-Slot Nut, Groove Size 8mm Stock no.:767-5654
@davidfarrell3666
2 жыл бұрын
@@OurVanPlan Super stuff, thanks guys! I’m finding lots of good info on your videos, your project looks amazing. Best, David
@Mark-rc1gj
2 жыл бұрын
Smashing idea with the bed 👍🏻
@OurVanPlan
2 жыл бұрын
Thanks Mark
@deirdre444
10 ай бұрын
Very nice.
@OurVanPlan
10 ай бұрын
Thank you
@patrikbujna6022
Жыл бұрын
Perfect idea
@OurVanPlan
Жыл бұрын
Thank you 🙏
@ianlui8144
2 жыл бұрын
Why inflict your choice of music
@OurVanPlan
2 жыл бұрын
Because it is my video and a like having music in it 🎵
@ianlui8144
2 жыл бұрын
@@OurVanPlan sorry it's just I have to turn volume down and when the interesting part comes I sometimes miss important info!!!love your work.
Пікірлер: 188