Thank you once again for this tutorial. Funny how you covered just about everything there is to do in this client in 30 minutes. One basic Blue Iris tutorial is like an hour long and it only covers the recording part, LOL
@s4uk218
5 жыл бұрын
I wish I had watched this before buying a second hard drive as my recordings only went back 7 days! Thanks for the great video
@DVSLTD
5 жыл бұрын
Thank you for the feedback 😀
@justinkinsey5517
3 жыл бұрын
@@DVSLTD hey David awesome video very close to Pelco's DSControlPoint DSAdmin off topic here would you recommend the plug n play NVRs and they would pretty much utilize the technology that the cameras have
@cjkokay
5 жыл бұрын
I have just change over our old analogue system in our alarm control room (42 cams with 6 fisheyes giving 60ish live views). So the tweaks to good performance as well as the extra show n tell feature for demo to clients are yet to come. Really enjoyed your plan speak explanation videos. Been hard to get Hik certified courses but should be doing that for each tech May & June. This will help us advance our knowledge for that better delivery.
@DVSLTD
5 жыл бұрын
Thank you Carl
@jsprowse
5 жыл бұрын
@5:12 THANK YOU!!! This is exactly what happened to me when the muppet who sent me the login info didn't make it clear whether the user name used a lowercase L or an uppercase I. You're a lifesaver mate!
@DVSLTD
5 жыл бұрын
No problem , Glad we could help
@dazdaz8
4 жыл бұрын
Very helpful! Good video and keep them coming!
@DVSLTD
4 жыл бұрын
Thank you 😊
@Y.But.
5 жыл бұрын
Dears, Before planning of your system, plase check the IVMS 4200 specification doc.
@emmanuelgordon2641
5 жыл бұрын
impressive video...quite informative...worked like a charm
@DVSLTD
5 жыл бұрын
Thanks for the feedback
@DVSLTD
5 жыл бұрын
Thanks for the feedback
@felipetrombiniaventura
4 жыл бұрын
Helps a lot. Thanks bro. Hugs from Brazil.
@DVSLTD
4 жыл бұрын
Thank you so much 😊
@reluthemask
5 жыл бұрын
Hello. A very nice program .. i like you rapid and good reviews about everything . I whanna make a project on a military base with 4MP IP cam with motion detection + Intrusion detection .
@DVSLTD
5 жыл бұрын
Excellent , thanks for the feedback, I hope your project goes well
@himanshuarora6814
5 жыл бұрын
Hi Dave, Thanks for the video. Just wanted to confirm, the DVR here must be connected to the Internet, in my case, it is not. hence, I cannot see any Online device. how can i connect DVR with my laptop then?
@DVSLTD
5 жыл бұрын
Hi , and thanks for this , you don’t have to have it connected to the internet If on the same network internally , if you are going off-site then of course we need to have it connected to a router on both sides. For this you can use HIK-Connect account on the remote DVR / NVR and then login to that account on the IVMS-4200 PC. Or you can use a Fixed IP address on the remote router Public IP and add the device to the software with this Fixed IP and do the port forward rules to suit.
@haywire17
5 жыл бұрын
Great tutorial, - however, iVMS4200 is the slowest to load, slowest to close, most unresponsive VMS sw I have ever used...Not sure why this is, or what can be done to correct it, but it is why the first thing done by companies that hikvision "oems for" is they write their own software.
@DVSLTD
5 жыл бұрын
Hi , it’s a fair point , there is always improvements when new versions come up and when installed on a good Spec PC it does perform better , it’s certainly not the worst performing VMS I have seen , they have now introduced a 64Bit Decode engine which improved performance , like always thanks for the feedback and we always push to get this better
@srsrsrsrsrsrsrsr
2 жыл бұрын
Hi Dave, we are trying to put a cctv on an area with no internet access. We are thinking placing a cctv there and after awhile, we manually collect the DVR to review the events. My question: 1. Will the hardisk lose data when unplugged during transit of DVR? 2. What is the fastest speed acceleration for video review? 3. Is it possible to use a battery to power the camera and DVR? Thanks
@DVSLTD
2 жыл бұрын
so in short no data will be lost by removing power and transporting it , so all good, yes you can use battery power 12VDC to power most cameras and some NVR / DVR , the mobile models are probably the best ones to consider for this , some do x16 , and more so it should be ok 😊
@oysterbread3367
6 жыл бұрын
Man... you lost me. Wish I could find a basic setup guide. Thanks anyways
@shayb9424
4 жыл бұрын
I agree. This is way too fast & complicated. Need a basic version please.
@andraspass4119
5 жыл бұрын
Hi Dave! My DS-2CD2135FWD-IS camera cannot be set ONLINE mode by the way. I mean in coloum "Device Serial No." cannot be seen any number and the blue globe net status still with red sign... What should do to make it online?
@DVSLTD
5 жыл бұрын
Hi , online to the software or to HIK-Connect?
@moathalmatary8803
5 жыл бұрын
Thank you for this video and I appreciate your efforts. I am going to install 38 cameras divided in to 3 groups. All groups will be connected by switches 16 ports. And all groups must be connected to 2 NVR 32 CH, model 7732 ni / I 4. If you don't mind could you help me how is going to work or what should I do to be these cameras work correctly.
@DVSLTD
5 жыл бұрын
Hello, sounds like a nice job to be honest , I would add all the cameras to the NVR in the 1st instance , then add the NVRS to the IMVS-4200 as this will also pull the information with it. Then under Group tab on device management , right click on each encoding channel and select update camera name to pull through the OSD names you have set on the NVR. Do you want to setup groups for each set of cameras?
@moathalmatary8803
5 жыл бұрын
@@DVSLTD Thank you very much for responding. You are right that it can be add all cameras to the NVR in the 1 st. I will add more information to clarify my point. I will install these cameras 38 or 40 on big hospital building and these cameras are distributed on the building in to 3 groups and the distance of the cameras is 50m and some is 70m. It is difficult to connect the camera to the NVR because of longe distance from camera to the monitoring room . I will send to you the plan of the building of you want.
@sobantu01
2 жыл бұрын
Great video.Why do I get a lot of buffering when watching or playing back recordings.I am using a hi speed WiFi connection.
@DVSLTD
2 жыл бұрын
It could be the end device , when you download it and play It is it then ok or same ?
@ramborums
2 жыл бұрын
Great extensive video .Thanks a lot. What can be the issue if none of the cameras are showing in Live view in the main view? All other configurations are working. DVR 7A16HGHI-F1. It used to work before. (pre-pandemic days) They simply say Cameras disconnected.
@DVSLTD
2 жыл бұрын
have you checked the device is still online? Its probably changed IP address or something
@ramborums
2 жыл бұрын
@@DVSLTD Thanks for your response. But I have this issue within a LAN all connected to the same switch. And they use static IP addresses.
@matttanous1
6 жыл бұрын
your video saved me some major pain, thank you so much! now, i had to mount two DS-2DE3304W-DE IP dome cameras vertically and now both of the live view images are being displayed sideways.. i have searched everywhere for the settings to flip the images 90 degrees to the left, but i cant find it in any of the hikvision software...
@DVSLTD
6 жыл бұрын
Most of the PTZ doesn’t support mirror function as when inverted you don’t get the tilt down limit needed, if you web browse into the Camera itself and go to image setting, in there if there is a mirror or rotate option under configuration > image > then you can adjust as needed , but this Doesn’t mostly get supported to be honest and we don’t have this model here to test for you 😊
@de03ley
4 жыл бұрын
Which NVR supports human body detection and anpr cameras please? Looking for 16 or 32 ch
@DVSLTD
4 жыл бұрын
the IDS range can support both , specific human body detection requires a certain camera
@mickhall2021
2 жыл бұрын
Hi Dave, how do we stop the IVMS 4200 Software timing out after 12 hours the live view crashes then we have to sign back in?
@DVSLTD
2 жыл бұрын
it shouldn’t , is it the PC that cant handle this? Have you updated to the latest version? Or you could try this lite version that uses less resource - www.hikvisioneurope.com/uk/portal/?dir=portal/Software/Video%20Management%20Software/iVMS-4200/iVMS-4200%20Baseline/4200%20Windows/iVMS-4200%20Lite%20v1.0.0.5
@AP-qc9hi
5 жыл бұрын
Thank you for the guide. I don't understand your logic in not installing the storage server. How would you access recordings from a day ago without the storage server?
@andicampbell8621
Жыл бұрын
I can`t seem to monitor the system when away from home. The app works fine but using the laptop is impossible. Using the i.p. address or the software you use, neither allow me to see the footage. I get the error code 1602. Can you advise please?
@christophermartin541
2 жыл бұрын
Mind Blown! Free?
@techspace9341
Жыл бұрын
What will my computer hardware configuration for 5 DVR with 80 camera ? LAN contact.
@richardburton7980
Жыл бұрын
Hi how do you get you intrusion blue lines off the Ives 4200 screen tia
@aaccount8185
4 жыл бұрын
What can i do if with this?ivms 4200 46 ipcams Error code.exe(302)
@DVSLTD
4 жыл бұрын
Hi , it could be a number of errors but normally it’s a connection error to the end device, maybe the device IP has changed, or username and password?
@houseofjax21
5 жыл бұрын
Thanks a lot!
@ting2732
2 жыл бұрын
How many cameras can the Hikvision iVMS-4200 hold? Is there a camera limitation?
@DVSLTD
2 жыл бұрын
1024 is the camera limit 😊
@christophermartin541
2 жыл бұрын
I was under the impression that Remote Playback could play the video stored on the SD card. Is that true? Is there a way to play the video on the SD cards? Seems like a logical thing the app should be able to do.
@DVSLTD
2 жыл бұрын
yes you can play back videos on the SD card via the local playback tool if you have the SD card in the same PC , does that help?
@davitmachavariani7982
5 жыл бұрын
hello, I have this problems , what I do? Playctrl.dll 2 The stream is not a Video & Audio stream. 6 The playback window turns black when adopting H.265 in the 64-bit operating system.
@DVSLTD
5 жыл бұрын
Hi , can you update to the latest version of the software and check its fixed now? What version are you using?
@rainiervaz100
4 жыл бұрын
Thank you for the extensive tutorial - we have the same system in our company. I have a video clip - In Remote playback how can I zoom in and get a clear image of a particular part of the video clip. I used the Open Digital zoom but the picture is distorted - how can I make it clearer via the iVMS-4200.
@DVSLTD
4 жыл бұрын
Hi and thanks for the feedback , we can only use the digital zoom inside 4200 and if this is blurred then I can’t do anything more inside this software itself , there are other software’s that can be used outside of this that are made to clear / clean video up for evidence that the police / government use , but these are forensic level tools , and will cost a lot 😊
@rainiervaz100
4 жыл бұрын
@@DVSLTD Thank you for the reply - can you provide me with a name of these softwares
@kalayaskitchen
4 жыл бұрын
OK this is a help file now - I sorted it, on the opening screen put a port number that's NOT in use or you will go around in circles as below, ok Dave!! (I put 8081) THEN THE VIRGIN LOGIN SCREEN COMES UP. Suggest you do a 3201 demo. Here is my Q = " We d'loaded 3.2.0.10 Client the latest version (i reckon its very different than your helpful install vid) , new installation on 64bit fast PC, no cams or DVRs yet, I wanted to get the software going before adding (and buying a lot of HK) devices.. There is no help in the manual for first installations. It won't go further (ie it won't show us the main screen) a small dialog comes up asking us for a port number as it won't take 8080 so I put 8081 and my WAN 192.168.1.1 / then it tries to connect to a "server" somewhere which we don't have as yet. I expected the software to install in one go without fail, it doesnt, we made sure avast was off and firewall was open. So it's a real bad "waste of time issue" as there seems to be no online tech help for experienced installers that can get you past this "server" stuff. Do I need to co-locate a server or server software first ? diolch yn fawr :-)" Answer is above folks
@DVSLTD
4 жыл бұрын
Hi , I hope your well , it sounds like the settings are not correct?, if you want I can take a Quick look via TeamViewer if you want to contact me on webinar@dvs.co.uk
@kalayaskitchen
4 жыл бұрын
@@DVSLTD thanks will do but fixed it finally, it was at the point of installation we had an assigned port conflict (8080 inuse) causing a "dialog loop" it wasn't "obvious" to me that I needed to SIMPLY change the port number on installation (in the first dialog box) to get around the "non install loop" of the package, all went smoothly after I changed (to 8081) and wow what a great system makes BOSCH look like old kybosh! So many features and full use with simple HKvision baby pan and tilt cameras. This is amazing, I'd go out and celebrate ----- but -- well :-) Diolch Yn Fawr!
@taingveasna5750
3 жыл бұрын
view on browser with mult screen as soft is not available
@nassoroibrahim972
2 жыл бұрын
how does one add nvr which is on a different network
@msmolyansky
5 жыл бұрын
Great video buddy . Thank you... If you had a choice between Geovision and HIKvision what would you choose ?
@DVSLTD
5 жыл бұрын
Hikvision.... 100%
@msmolyansky
5 жыл бұрын
Thank you my English Comrade lol
@DVSLTD
5 жыл бұрын
@@msmolyansky No worries my Michigan Mate!
@msmolyansky
5 жыл бұрын
Sorry to bug you again... Have you ever setup your HIKvision with the AWS services yet? I have been screwing around with the new blazer pro and iVMS-4500 . I just want wanted to make sure I don’t select a plan that will bite me financially . AWS has a huge potential because of the speed and availability for the multi location businesses. Their freaking billing is kind of weird so I just wanted to know if can may be make a video about it. You seem to be pretty knowledgable. I am more of an IT guy but we install a lot of IP cameras as well.
@DVSLTD
5 жыл бұрын
@@msmolyansky Hi , it is something we have in the pipeline and many favour this route, as you said we know the customers who have been bitten from large bills due to the way they do this so we will plan something carefully
@BELCOMSA
6 жыл бұрын
Hi Dave ,great video, need help on custom view for example 16 video squares with12 small screens and 4 large with added rotation between small and large. Thanks Rajen from SA.
@sunithaps4483
6 жыл бұрын
It was useful to me
@DVSLTD
6 жыл бұрын
Thank You Sunitha Ps :)
@graemeledwith3027
3 жыл бұрын
thanks
@eshaamrichards3576
5 жыл бұрын
hi there i have a connection issue on my ivms 4200. When im trying to connect it displays ... Reconnection Error Code OpenSDK StringError(101) device connections is too large. Could someone please assist . thanks
@DVSLTD
5 жыл бұрын
Hi , is it just the one device you have added into the software or is this device a large 256ch NVR? There was an issue with this a long time ago , is the IVMS-4200 been updated to the latest version ?
@P90Camper
5 жыл бұрын
Hi, great video. Very helpful. How do you think this compares with the "lite" version? Would you consider doing a video on that as well? I am thinking about something less hardware intensive for a basic user/owner who dose not use it often, would you recommend the lite version?
@DVSLTD
5 жыл бұрын
Hi , thanks for the feedback , it’s of course much more functionality than the lite, I can do one on the lite version of course
@P90Camper
5 жыл бұрын
@@DVSLTD That would be great! The regular version can be overwhelming for some basic users.
@shafikcharaneya4211
2 жыл бұрын
Hi I have heard about a company called veesion this company provides a server for hitch can connect to dvr or nvr and which can automatically delete theft and lots other stuff so I was asking if u know anything about it and make a video on it it will be very helpful
@joew4295
6 жыл бұрын
After setting up the 4200 client software and then clicking to run it, I get message saying 'attention Current screen resolution (1280x720) is less than the minimum recommended (1024x768), would you still like to run the application?" I then run it, but then i get a partial screen for which I cannot do much of anything including exit out of it. Can anyone help me? I notice that when dvs guy started his 4200 the title graphic rectangle was much smaller than it appeared on my screen. Do I need a new monitor? - Mine is an LG widescreen only about 10 or so years old.
@DVSLTD
6 жыл бұрын
Check the windows display resolution is set to 1920x1080 and that will cure this
@mohammadfayazuddin6924
4 жыл бұрын
Plz multiple dvr set to ivms and slipt the one cam to another cams
@DVSLTD
4 жыл бұрын
Hi , this is an extensive guide, and there is also another one on the latest V3 software, not sure what slipt the one cam to another cams means?
@4805lvd
3 жыл бұрын
I used to watch my home on my tablet and Mobil phone, suddenly I cannot watch anymore. It says "device offline". What should I do I am in out of country! Any help will appreciate. Thanks
@DVSLTD
3 жыл бұрын
it could be the network issue locally, the device is off, the network IP address has changed which has effected the connection etc, hard to say without further investiagation sorry
@awadams91
3 жыл бұрын
Hi Dave, Do you go over events? Are envents setup at the NVR? Intrusion, for example.
@AAAA-mk6lj
5 жыл бұрын
Thanks for your time man...question plz..why can't see advance when i press on remote configuration?
@DVSLTD
5 жыл бұрын
How have you connected the device ?
@AAAA-mk6lj
5 жыл бұрын
DVSLTD Actually I have 2 devices, one through internet and other thru local network with same subnet. and both no advance. i am using ivms-4200 clients software
@DVSLTD
5 жыл бұрын
We would need to take a closer look , have you updated your IVMS -4200 ? , you should get the advance , where are you based?
@AAAA-mk6lj
5 жыл бұрын
@@DVSLTD I just download client software 2.8.1.4 from hikvision site, and I can not find advance one. if you can provide me the link for the software i appreciate , I am based in Kuwait,
@mikee2056
6 жыл бұрын
Hi Dave, another great video, helped me a lot....I do have one question for you. I'm sure you have clients that prefer to use the Mac Version of the iVMS-4200 software. Can you tell me, assuming you are familiar with Mac OS version, I'm sure you are, where I can input the Stream Key. On my Mac version, under Device Management I DO NOT have the two tabs that show Divide / Group. On my MacBook Air which I portioned and installed windows, I have those tabs, and when I go into Encoding channel, I have the option to modify a camera, and input the Stream Key. I CANNOT find this on the Mac version software. Are you able to help at all. Thanks in advance. Keep up these great vids by the way...
@DVSLTD
6 жыл бұрын
Thanks for the feedback mike, currently the MAC versions are not updated as frequently as the Windows versions, out of interest what version number are you using on the MAC ? I will go and then find out once I know as there are a couple of recent releases on the MAC platform.
@mikee2056
6 жыл бұрын
Hi Dave, I am using Mac Version v1.02.05.02...I have looked and looked, but damn if I can find and input area for the Stream Key. I REALLY hope you have more luck than me. Thanks again for replying.
@davidpickard
6 жыл бұрын
Great video, Im thinking of changing our system from mobotix to hikvision. One question, what NVR are you using for this video?
@DVSLTD
6 жыл бұрын
that is great to hear. I am using the DS-9632Ni-I8 NVR 😊
@justinkinsey5517
3 жыл бұрын
@@DVSLTD is that NVR used for more of a commercial enterprise environment
@DVSLTD
3 жыл бұрын
@@justinkinsey5517 Hi , 9000 series more so yes 😊
@sarahprice5260
5 жыл бұрын
Hi,soo,im in a bit of a pickle,my husband and brother in law have installed a hikvision system for a customer,my BIL does all the techy side of it,the customer had no internet at the time but now has,my BIL has gone awol and im trying to work out how to do the techy side myself! Your videos are so helpful,what im trying to work out is how our customers son can view his mothers cameras remotely,i understand i have to do port forwarding? can this be just for the DVR or do i have to open a port for each camera? (there are 3) Im a total newbie here! please help!
@alon3107
2 жыл бұрын
hello there, i have a question for you. how do you erase spacific footage so you cannot playback it?
@pwittouck8707
4 жыл бұрын
Hello, I have just bought a Hikvision set of camera's and a NVR. When I open the IVMS-4200 app I can see my device on the bottom side just like you. But it is impossible for me to add it to divices. Or view my camera's. I just found your video and you seem to be quite good at this. How did you know the ip adress you added in 3:50? I think i need to do the same but can't figure out how.. To be honest, I havent got a clue..
@badera3715
3 жыл бұрын
Hi Dave, Could you please help. I can monitor the facial temperature with AI Dashboard. Is it possible to not able to see the temperature value, only see ok (green) our abnormal (red)? Thank you for your help.
@DVSLTD
3 жыл бұрын
I don’t think its currently possible , is the temp displayed against the face of the person on the image from the camera as you could turn that off
@PacoArronaC
5 жыл бұрын
Hello I have an Hikvision IP NPR cámara, how can I have the license plates recognized on a file on my pc? I need to have them and Access them from an app to some reports, I do not have a dvr nor nvr just my pc. Thanks in advance...
@DVSLTD
5 жыл бұрын
when you web browse into the ANPR Camera , make sure its “run as administrator” and then download the Plate template under “vehicle” option in Configuration , you then update the File with the Car Registrations, using CAPITALS and no space , like ABC123 , and say if it’s in whitelist or blacklist using 0/1 , then you save it and upload it back , this has to be done manually every time a plate needs to be added, changed, deleted, we cannot automate this using just the camera, if you use HIK-Central then you can input the Text direct into the software making this process very easy
@PacoArronaC
5 жыл бұрын
Thanks, I solve it setting the ftp and marking use it -trigger- under Configuration->vehicle detection , so each time the camare detects one it upload a picture with the plate on the file name that I took with my app searching every 20 seconds, Works great!...
@DVSLTD
5 жыл бұрын
@@PacoArronaC No worries. Thanks for watching :)
@reamer59
5 жыл бұрын
Hi Dave, great video. When I try to add a device I get an error message "The device type is not supported" same message for both my NVR DS-7616NI-I2/16P and camera DS-2CD2185FWD-I. Both devices are on and can be seen by SADP Tool, any idea what the problem can be. Thanks in advance.
@harrisgabriel1976
3 жыл бұрын
Hi there, is there a way to blur faces in live video?
@DVSLTD
3 жыл бұрын
Not on our equipment yet without using the really high end server sorry
@harrisgabriel1976
3 жыл бұрын
@@DVSLTD what if i use HIKVISION DS-2CD2385G1-I camera with IVMS 4200? There is a face detection option for this camera, so, do i need any advanced IVMS4200 version to use this option? What i really need is to use a rectangle in the live view on people's faces. I see in ivms manual ther is an optional "Enable Dynamic Analysis for Face Detection". Any idea why optional?? Thanks in advance!
@ThePercivalGlyde
5 жыл бұрын
Thanks!
@ramshadpatala6539
6 жыл бұрын
what is the computer specification required to run the ivms with high perfomance
@DVSLTD
6 жыл бұрын
you can download the 4200 PDF from the link below, this outlines the specifications required: www.dropbox.com/s/m08bogjx1bv5j0r/iVMS-4200_Spec_2.7.1.pdf?dl=0
@benjaminberger9629
4 жыл бұрын
Hi, do you know if it is possible, to switch to fullscreen on movement?
@DVSLTD
4 жыл бұрын
Hey , not with 4200 itself just on local NVR / DVR , you can get pop up on motion in middle of screen as event on 4200
@benjaminberger9629
4 жыл бұрын
Mh alright :( But thanks for the answer!
@vipinvijayan1228
3 жыл бұрын
How can save the thermal images in laptop..... Please give me the advice
@DVSLTD
3 жыл бұрын
depends on the application , what are you trying to do ?
@hakamyosfan6081
6 жыл бұрын
Good
@BryanDumaguina
5 жыл бұрын
Is it possible to add a Dahua device (DVR) to this software?
@DVSLTD
5 жыл бұрын
Noooo
@williamnguyen2749
4 жыл бұрын
Hey Dave, do you know how to limit the time a shared client can see the live camera?
@DVSLTD
4 жыл бұрын
Hi , not sure I understand , shared client as in HIK-Connect shared device ? 😊
@williamnguyen2749
4 жыл бұрын
@@DVSLTD Yes, but I wanted to limit my the time my client can watch the camera, is it possible to do so?
@abdullahkararr4364
6 жыл бұрын
that was helpfull could u make another part like these
@gabrielaperez5568
5 жыл бұрын
I have 2 cameras on line that i can configure remotely but they don't appear in the Main View panel, what can I do? please help
@gabrielaperez5568
5 жыл бұрын
Both are DS-2CV2Q0IFD-IW and I'm using iVMS-4200 v2.7.1.9
@DVSLTD
5 жыл бұрын
Please go to control panel , then under device management, click on the “group” tab on the left hand side next to the devices added tab, then click “+” add group , then select add group by device tick box and select the device(s) you require, this will then add the desired cameras into the live view tab under the devices name 😊
@myodpast
6 жыл бұрын
would you know by any chance why my fastforward and backwards, download buttons are grayed out?
@DVSLTD
6 жыл бұрын
Hey , it could be that the user you are logged in as on the software does not have the download and correct review functions in your permissions , if your already the admin user and presume the device added is the HIKvision DVR/NVR and also has the correct permission, then it could be that we need to update the IVMS 4200 , do you know what version this is ? ( at the top menu bar under about) , is It windows or mac that is being used?
@myodpast
6 жыл бұрын
Thanks for reply. Its V 2.6.2.7, and the thing is it was all fine previously but after upgrading software those options just grayed out for some reason. Its running a only admin on win 8.1
@ramshadpatala6539
6 жыл бұрын
how to configure alerts when any camera, hard disk, and NVR gone offline
@DVSLTD
6 жыл бұрын
You can go to event management in main menu and select event type and how you want it to notify you
@DeanoEssex
6 жыл бұрын
WTF........... 230mb.. what exactly is this software?? Didnt stick around to find out!
@DVSLTD
6 жыл бұрын
are you referring to the file size of the software? There are many functions so it's large when unzipped. There are many software packages with larger file sizes.
@DeanoEssex
6 жыл бұрын
I'm using IP Camera software that is so buggy with wifi, Floureon sent me an updated version but the 1920x1080 will not save when i select it, so i was looking for a basic view and record program, i started downloading this iVMS-4200 and noticed it was a huge 230mb.. Watching your video looks like its just to much for the single user, so i didnt bother. It looks too complicated for me lol :-) but thanks anyway.
@jeffreyooi1971
6 жыл бұрын
Hi, thanks for sharing. How do you view ur 20+ camera from your mobile at home or outside office? Any setting need to set at pc or server side?
@DVSLTD
6 жыл бұрын
On your mobile use IVMS-4500 or HIK-Connect , both allow 16 cameras at a time to be viewed
@jeffreyooi1971
6 жыл бұрын
DVSLTD I did tried used the ivms-4500 for mobile but not working. What is the port, username and password shd be? I did a NAT to my LAN server IP with a public IP. I don't hv any dvr or nvr setup. Just purely the ivms4200 software in server
@DVSLTD
6 жыл бұрын
the default server port is 8000, unless this has been changed, the default admin username is admin , sadly only yourself or the customer would know the admin password, or add the site as the username and password you have been given
@jeffreyooi1971
6 жыл бұрын
DVSLTD no changed on the default port 8000. Username n password is correct. I can login on pc with ivms n browser IE for the camera. I think it is because I don't have a NVR device. I'm using server to manage all my IP cameras using ivms-4500 software.
@jeffreyooi1971
6 жыл бұрын
Hi, I think the newest ivms-4200 software does not support NVR anymore. I hv to download an older version of it iVMS-4200 PCNVR n setup all the cameras. Once done I'm able to view all the cameras from my mobile at home.
@jomarobina8238
4 жыл бұрын
hellow sir.. can i ask for the download link?.. tnx a lot.
Are you on latest version of 4200 and are you playing back a device connected to hik connect?
@daslolo
11 ай бұрын
Aspect ratio, anyone, anyone?
@stu69
5 жыл бұрын
My ram keeps going to 100 % What can I do to stop it from crashing
@craigr306
4 жыл бұрын
mate can you do one for v3
@DVSLTD
4 жыл бұрын
Already done, link here kzitem.info/news/bejne/mIFjq3ifkJecfqw
@xinixxagnix201
4 жыл бұрын
min 15 seconds sucks in presets......
@DVSLTD
4 жыл бұрын
We have some models firmware that supports less 😊
@DVSLTD
4 жыл бұрын
It can be connected to Wi-Fi OR the network via LAN connection on the system , so either will work 😊
@mahi98goodguy
6 жыл бұрын
I am unable to call patrol from this software....it's showing opensdk error....plz help what am I supposed to do??hikvision helpline is garbage
@DVSLTD
6 жыл бұрын
can you let us know what version of IVMS-4200 that is being used, also what method have you added the device into the software , Direct IP , HIK-Connect? And has a patrol been set in the 1st instance via the software, so set the patrol within IVSM 4200 then call the Patrol ??
@mahi98goodguy
6 жыл бұрын
@@DVSLTD connected via hik-connect, is had setup pattern directly using mouse on NVR.... Ii am able to call presets and ptz direction but not patrol or patterns using ivms....
@DVSLTD
6 жыл бұрын
Have you done the ports forwarding and used then domain name function ?
@mahi98goodguy
6 жыл бұрын
@@DVSLTD nope...do I need to do that for patrol and pattern calls??I am able to do preset calls
@-azhar-8998
4 жыл бұрын
Yo Can i get that zerk account?
@DVSLTD
4 жыл бұрын
Zerk account? Sorry not sure I follow
@k1sa560
5 жыл бұрын
KTO OD MISTERIUSA? XD
@gigatec916
6 жыл бұрын
no offense to you and your video. but the iVMS software is garbage. Not user friendly and over complicated to playback video.
@nekron75
6 жыл бұрын
What would you recommend instead of this?
@ayres6727
5 жыл бұрын
Can you help me with home Hikvision camera?
@RobvandenBoogaard
5 жыл бұрын
nekron75 Milestone Xprotect essential plus. Free for up to 8 camera’s
@xephael3485
5 жыл бұрын
It sounds like you're just stupid and can't handle technically advanced software.
Пікірлер: 181