Extreme Incredible Manufacturing Production Process of Hydraulic Jack Cylinder Rod by Machinist
The piston rod is typically a hard chrome-plated piece of cold-rolled steel that attaches to the piston and extends from the cylinder through the rod-end head. In double rod-end cylinders, the actuator has a rod extending from both sides of the piston and out both ends of the barrel.
Watch this video to learn how hydraulic cylinder rods are made. This video is about hydraulic cylinder manufacturing, and you'll learn about the different parts of a hydraulic cylinder, as well as the manufacturing process.
Hydraulic cylinders are used as linear actuators to apply unidirectional force and stroke in many marine and offshore engineering applications. The piston rod of these cylinders transmits the power from the displacement of pressurized hydraulic fluid via the piston inside the cylinder shell.
If you're looking to buy a hydraulic cylinder rod , then this video is for you. You'll also get a chance to see how a hydraulic cylinder is made, from start to finish. So watch this video and learn all you need to know about hydraulic jack cylinder.
Most often, the cylinders are made of steel or aluminum. At pressures lower than 10 MPa, cast iron cylinders are used. At pressures higher than 20 MPa, they are made of seamless steel pipe. For pressures above 20 MPa, the pipes are made of steel or forged steel
#manufacturing
#cylinderrod
#hydrauliccylinderrod
#jackcylinderrod
#production
#pakistanitruck
#wonderingskills
#machinist
#machining
Негізгі бет Автокөліктер мен көлік құралдары Extreme Incredible Manufacturing Production Process of Hydraulic Jack Cylinder Rod by Machinist
Пікірлер: 2