Two things you will never sell in Pakistan, PPE and workbenches.
@mimechanics1019
Жыл бұрын
What is ppe ? Did you explain if you don’t mind ❤️👍
@markb5803
Жыл бұрын
@@mimechanics1019 Personal Protective Equipment
@wazzazone
Жыл бұрын
Personal Protective Equipment. Safety gear and apparel.
@PedroPereira-jl3pi
Жыл бұрын
yes, it does not come in kids sizes.
@Ilovegold
Жыл бұрын
Just some regular shoes would be nice
@ВикторКурлов-ф8к
Жыл бұрын
Босоногий ВЕРТУОЗ ( с современным инструментом был бы СПЕЦИАЛИСТ ) спасибо Петру 1 что оставил вам кое что из инструмента
@mimechanics1019
Жыл бұрын
Thanks for watching ❤️👍
@Bighead-ut6sf
11 ай бұрын
Ядерная держава - Пакистан! На Вы, и шопотом.
@HanstheTraffer
Жыл бұрын
Every boy of 10 years should have to watch these videos and have someone explain the process to them. This is better than school.
@mimechanics1019
Жыл бұрын
Thank you for your opinion ❤️👍
@mrMacGoover
11 ай бұрын
Yeah... closing your eyes just before striking an arc doesn't help that much, the ultra violet light still passes through your eye lids.
@mimechanics1019
11 ай бұрын
Yes you are right 👍
@shanejohanson1638
Жыл бұрын
I still can't tell. Is it machismo or laziness. Would it kill you to grind the torch cut pieces before the fit up? Those terrible welds would be quite a bit better with only 10 minutes more prep. These guys couldn't weld themselves out of a paper bag. Take some pride in your work man.
@mimechanics1019
Жыл бұрын
Thanks for sharing your thoughts and experiences ❤️
@Sarge084
Жыл бұрын
Made mainly from the hull plates of the ships they run up onto the beaches for dismantling, you can still see the barnacles on them!
@mimechanics1019
Жыл бұрын
You’re right 💯
@albinklein7680
Жыл бұрын
Those bone dry spindles and bearings on that roller bender make me sad. It absolutely amazes me that those people have machines that cost an absolute fortune in their country and treat them that bad.
@mimechanics1019
Жыл бұрын
Thanks for sharing your thoughts and opinions stay safe and tuned ❤️👍
@horstmuller7512
Жыл бұрын
Good job! Yes, all tolerances are guaranteed less than 2 fingers.
@mimechanics1019
Жыл бұрын
Thanks for watching and your support 👍❤️
@petermoto409
Жыл бұрын
@@mimechanics1019 They re not supporting, they are making fun. This shit is comical.
@mimechanics1019
Жыл бұрын
I understand peter thank you for your help ❤️
@ivantaurua6735
5 ай бұрын
Asians are very skilled creative inventions in the steel fabrication industrial field they can replicate anything of enormous scale with relative ease like a precision machine product line in double time there seems to be no quality control whatsoever during each phase of development who am I to judge at their qualifications or capabilities still my view of this video is one of wonder and fascination 😊😊😊
@mimechanics1019
5 ай бұрын
Thank you so much for your kind comment please stay well and tuned❤️
@andyp9131
Жыл бұрын
No health and safety at all no boots no gourds on the machines no welding masks accidents waiting to happen if this was in the uk the company would shut down closed and fined. Omg
@mimechanics1019
Жыл бұрын
Agree with you but some reasons behind this 👍
@matthewbolding5538
Жыл бұрын
It still amazes me how they are able to work like that in a pair of sandals and no gloves on!
@mimechanics1019
Жыл бұрын
@matthewbolding5538 thank you so much sir for your appreciated response stay tuned for the second and complete part on Sunday ❤️
@annechristiansen941
11 ай бұрын
good job guys.👍🤗👍🇸🇯
@mimechanics1019
11 ай бұрын
Thank you so much 👍❤️
@carlosrodriguez2001
Жыл бұрын
Saludos desde México, excelente trabajo pero... Las condiciones de trabajo son muy malas, sin un buen lugar de trabajo, ni las condiciones adecuadas, ni el equipo personal de seguridad. Saludos 🤟🤟
@mimechanics1019
Жыл бұрын
Thank you so much ❤️
@potterteksmith7548
Жыл бұрын
Hope they have a comprehensive workers compensation policy...
@mimechanics1019
Жыл бұрын
Yes I personally visit there owners of this factory he is very good and compassion 👍❤️
@potterteksmith7548
Жыл бұрын
@mimechanics1019 The workers are obviously highly skilled but it's the conditions they work in that would get the factory shut down immediately in this country. Safety being the major issue like handling molten metal with no protective clothing (even bare feet or open sandals!)
@pennyturner8293
11 ай бұрын
Rust prevention and lick of paint on machinery would make things better including oil or grease
@china-trip
Жыл бұрын
My best friend, Excellent video! Keep it up! I had to see the full video, as always, Keep it up! +thumb up3!
@mimechanics1019
Жыл бұрын
Thank you so much my best viewer thank you for your support and appreciate always ❤️
@davidbryant5881
Жыл бұрын
They should be paid alot more than they get for the work they do
@leandersmith6184
11 ай бұрын
Yeah you're right but willing to pay a bit more for those items, is another question.
@treeguyable
Жыл бұрын
Always bend your welding rod, so you don't have to move your hand an inch😅.
@mimechanics1019
Жыл бұрын
Great point!❤️👍
@dimitarangelov5758
Жыл бұрын
Голяма работа сте желая ви здраве поздрави от България
@mimechanics1019
Жыл бұрын
Thank you so much for your kind and appreciated words i wish you healthy and happy greetings from pakistan❤️
@mhamedalia4919
Жыл бұрын
Très belle finition merci
@mimechanics1019
11 ай бұрын
Thank you so much
@anthonygregory3022
11 ай бұрын
Sit down job are always the best
@mimechanics1019
11 ай бұрын
Yeah you are correct 👍
@anthonyallwood593
Жыл бұрын
Very nice work much respect for you guys.
@mimechanics1019
Жыл бұрын
Thank you so much sir❤️
@JoseLuis-ob8bn
11 ай бұрын
Chapas de acero mabal , son de una caludad superior saludos desde Argentina Bahia Blanca 👍👍👍👍🇦🇷🇦🇷🇦🇷🇦🇷
@mimechanics1019
11 ай бұрын
Thank you so much for your appreciations 👍❤️
@JoseLuis-ob8bn
11 ай бұрын
@@mimechanics1019 👍👍👍👍🇦🇷🇦🇷🇦🇷
@mimechanics1019
11 ай бұрын
@@JoseLuis-ob8bn stay healthy and tuned for more videos thank you so much 😊👍❤️
@StephenHowton
10 ай бұрын
No safety boots or other personal protection equipment; working on machines with no guards to protect against injury; floors dangerously littered and many more safety hazards; risk of severe eye damage or blindness when welding with no eye protection. Whilst I understand the workers' need to support themselves and their families, I cannot countenance their employers' disgusting avarice.
@mimechanics1019
10 ай бұрын
Thanks for your opinion and stay tuned please ❤️
@BrahimGourid
Жыл бұрын
J’ai jamais compris pourquoi vous travailler toujours par terre et pas sur un marbre qui serait plus confortable
@mimechanics1019
Жыл бұрын
Because they use sledgehammers that’s why if they use on marble than you better know what happens ❤️👍
@premiumcichlidfarm2201
Жыл бұрын
What is amazing. They are working with Stonehenge technology.
@mimechanics1019
Жыл бұрын
Thanks for your kind information ❤️
@manuterae9377
Жыл бұрын
Estos trabajadores cuanto tiempo alcanzan a vivir. Teniendo ese ambiente insalubre de trabajo y falta de reglas de seguridad y equipos de vestimenta de protección?😮
@mimechanics1019
Жыл бұрын
Don’t worry they addicted work like that from beginning 👍
@libertyman3729
Жыл бұрын
There is no retirement age in third world countries.
@ШавхалШавхалов-х3б
9 ай бұрын
В индии придумали новую професию токарь фрезировщик сварщик грузчик😂😅😢
@mimechanics1019
9 ай бұрын
Thanks for your comment on this 👍
@apakansaja8505
9 ай бұрын
*They know how to build the machine. They shud engage a University engineering student to build a machine that will automate the process. That shud be the next step. Automate every single components.*
@mimechanics1019
9 ай бұрын
Thanks for watching and sharing your thoughts on this please stay tuned and stay safe and healthy greetings from us❤️👌
@slimslaam560
Жыл бұрын
Why they did not use casting then machining instaed of welding all these parts together
@mimechanics1019
Жыл бұрын
Because in this machine after long time use they could be open and repair again and again thats why thy using welding and folding system ❤️👍
@BalbirSingh-co3zb
Жыл бұрын
Thank you for our message reply iam so setcifid 🙏🙏🇮🇳
@mimechanics1019
Жыл бұрын
You’re welcome 😇
@garytelling397
Жыл бұрын
nice old school machining technique on the horizontal borer👍
@mimechanics1019
Жыл бұрын
Thanks 👍
@roberthallas6964
Жыл бұрын
Good job ❤
@mimechanics1019
Жыл бұрын
Thank you very much!❤️
@donaldhollingsworth3875
Жыл бұрын
There is nothing about safety & precession in these 3rd world countries. I can not fathom how they make the parts that they do. I just hope that these parts do not end up in the USA!
@mimechanics1019
Жыл бұрын
Thanks for sharing your thoughts ❤️
@javedhassan555
Жыл бұрын
The so called first world is a looters brigade
@helsonjonathan
Жыл бұрын
Doesn't matter what you think this machine it's going to work
@mimechanics1019
Жыл бұрын
Thank you for your support ❤️
@chechnya
Жыл бұрын
@@javedhassan555 So you're telling me Pakistan is a third world country?
@KM-vc2yp
Жыл бұрын
Expeller machine?
@mimechanics1019
Жыл бұрын
Yes it is a expeller machine
@PersMachinist
Жыл бұрын
Nice work
@mimechanics1019
Жыл бұрын
Thank you so much sir 👍❤️
@АРТЁМ101-м4х
Жыл бұрын
па пожарной АЦ УРАЛ, стоит ПН заказ made in India 👍
@mimechanics1019
Жыл бұрын
Thanks for your information ❤️
@swamisamarthchari932
Жыл бұрын
Very clean planned work by all . God bless you all dear. Love from India 🇮🇳 Goa..
@mimechanics1019
Жыл бұрын
Thank you so much for appreciate us please stay tuned and also love from pakistan 🇵🇰 rawalpindi
@petermoto409
Жыл бұрын
"Clean"???? Are you fucking serious??
@warrior4christ777
10 ай бұрын
More bush league than precision Machining
@mimechanics1019
10 ай бұрын
Thanks for your important words stay tuned please ❤️
@BalbirSingh-co3zb
Жыл бұрын
Paaji what is the size of oil mill round body 4 Bolt 🔩 or 6 Bolt 🔩 thank you good job ❤ love from East Punjab Kalanaur 🇮🇳🙏🙏
@mimechanics1019
Жыл бұрын
Paaji love you greetings from north punjab from pakistan 🇵🇰❤️🥰🥰😘😘😘
@mimechanics1019
Жыл бұрын
I don’t know exactly what is size of this machine i just make videos from different places and shops please never mind ❤️
@pierpalumbo415
Жыл бұрын
...digo que a tecnica destes individuos, de permanecerem durante longos periodos, sentados no chão é algo a ser estudado melhor pelos cientistas da casa branca... a pergunta que fica é... quem pintou a casa branca??
@mimechanics1019
Жыл бұрын
I don’t understand what you want to say sir but thanks for watching ❤️
@KM-vc2yp
Жыл бұрын
Smoke some more crack
@usmanyousaf6834
Жыл бұрын
Good job bhai jann
@mimechanics1019
Жыл бұрын
Thank you so much ❤️
@wazzazone
Жыл бұрын
Factory???
@mimechanics1019
Жыл бұрын
Yes
@alfrescabanilla2504
Жыл бұрын
advance technology
@mimechanics1019
Жыл бұрын
Thank you sir 👍❤️
@АРТЁМ101-м4х
Жыл бұрын
и,🤔,i🤔,???
@mimechanics1019
Жыл бұрын
I don’t know what you want to explain ❤️
@Wowmechanics1
Жыл бұрын
Nicely by Wow Mechanic1
@mimechanics1019
Жыл бұрын
Thanks
@rocketman13f51
Жыл бұрын
How their eyes don’t get flash burns from the arc welder is a mystery. I got it once while watching my father weld a broken part. Of course I was told not to watch but of course as ten year old I ignored that. Amazingly my mother new how to fix my pain. She chopped up a raw potato into mush and then had me lay on my back.she put the mush on both of my closed eyes and within 30 minutes the pain was gone. I guess it was some kind of a chemical reaction with the potato juice on the skin of my eye lids and my actual eye balls!
@mimechanics1019
Жыл бұрын
Ooh i agree with you because i am also suffer with this case because i am also a welder or machinist till now its my own channel you are right on this topic why they didn’t have safety equipments as they needed because of ownership they just want more money in few resources and never wanna lose money on these little issues only God can help them thank you so much for sharing your experience and thoughts very we’ll appreciate ❤️ stay tuned please
@alro2434
Жыл бұрын
Thanks! Getting the most out of everything available to the max: metal, machines, people, and design. That said, the shaper's clapper box is really getting a workout and never seen a welding cable with so many band-aids.
@mimechanics1019
Жыл бұрын
Thanks for sharing your experience and thoughts 💭 on this stay safe and stay healthy ❤️👍
@chakravarthyc2603
11 ай бұрын
Good workmanship. keep it up.
@mimechanics1019
11 ай бұрын
Thank you so much ❤️
@pekpks7347
Жыл бұрын
Beautiful welding in an unfavorable and dangerous environment
@mimechanics1019
Жыл бұрын
Thanks for watching
@phils4634
11 ай бұрын
They weld far better than I can, with all the "Western Goodies". Mind you, I'm not a Welder by trade (by any means), nevertheless . . . . .
@williamcarter9380
11 ай бұрын
Without the proper work conditions, just wow.🎉🎉🎉
@mimechanics1019
11 ай бұрын
We agree!
@libertyman3729
Жыл бұрын
They all wear thoes safty flip-flops, Bless there hearts .
@mimechanics1019
Жыл бұрын
Thanks for watching and sharing your thoughts ❤️
@JOSEF7011
9 ай бұрын
20:00 The gentleman is very skilled. He would be better off working with a quality gauge. In this way, one only worries whether it will work out by the 2-3 hundredths of a mm or not. The Lord really can.
@mimechanics1019
9 ай бұрын
Yeah you’re right sir thanks for your comment appreciate as well ❤️
@christianvalenzuela225
11 ай бұрын
What skilled worker!😊 a treasure for his workshop....
@mimechanics1019
11 ай бұрын
Thanks for appreciate ❤️
@xarkava9648
Жыл бұрын
Το highlights που αναβη και σβήνη συνεχως, είναι πάρα πολύ ενοχλητικό
@mimechanics1019
Жыл бұрын
Ok
@richardchaney7473
Жыл бұрын
I noticed they never steam clean and/or use phosphoric acid on the metal before they prime (when they prime) and paint. I bet this stuff rusts like crazy.
@mimechanics1019
11 ай бұрын
Agree
@baldyoldfart5828
Жыл бұрын
Grease your machines people... it only takes minutes
@mimechanics1019
Жыл бұрын
You are absolutely correct about this problem 👍❤️
@mimechanics1019
Жыл бұрын
Thank you sir 👍❤️
@petermoto409
Жыл бұрын
They do. They lubricate them with the oil soaked dirt that they throw all the freshly machined parts on.
@Jack-Fleming
Жыл бұрын
Can you explain the crack ? About at minute 18.
@mimechanics1019
Жыл бұрын
That is not a crack that is tourch cutting mark on the ship scrap plate
@65gtotrips
Жыл бұрын
What’s an ‘expeller machine’ ?
@mimechanics1019
Жыл бұрын
Its making oil from natural seeds in this machine pressing the seeds for oil extraction ❤️
@65gtotrips
Жыл бұрын
@@mimechanics1019 Ah…Thanks !
@Sarge084
Жыл бұрын
I think extrusion machine might be a better description!
@thykoodamoilmill.churchroa9833
Жыл бұрын
Are you manufacturers ?? Give number
@grahammaloney3984
Жыл бұрын
goggles please
@mimechanics1019
Жыл бұрын
Thank you so much sir also for good suggestions 👍❤️
@williampihahuna195
Жыл бұрын
Je suis admiratif de voir ces ouvriers travailler à même le sol, le confort de ces personnes n'est pas le cadet des soucis de la direction, ,je ne passerais pas ma journée accroupi ,il me faut absolument un établi, c'est la moindre des choses. les patrons ont de la chance d'avoir d'excellent ouvriers à leurs dispositions. Les tourneurs, les soudeurs, les jeunes apprentis bref les patrons ont de la main d'oeuvre à profusion a leur disposition merci quand même pour la très bonne vidéo ,que Dieu vous préserve des accidents
@mimechanics1019
Жыл бұрын
@williampihahuna195 thank you so much for appreciating us im also a machinist in these shops I understand how this is difficult for you to spend some time here thanks a lot for appreciate us❤️👍
@masterQ20
Жыл бұрын
*Excellent man, thank you for sharing your work, God bless you*
@mimechanics1019
Жыл бұрын
Thank you so much ❤️👍
@elektrical
Жыл бұрын
super , bravo
@mimechanics1019
Жыл бұрын
Thank you so much ❤️👍
@Игорь-м6п8ы
Жыл бұрын
Молодец мужик .... на нашего Буншу похож ...
@mimechanics1019
Жыл бұрын
Thanks for watching ❤️👍
@larryperdue508
Жыл бұрын
Would like to see 👀 the machine work to see what it does
@mimechanics1019
Жыл бұрын
Yes i will show you complete process in 2nd & last part I hope you enjoy and thank you so much sir for appreciate 👍❤️
@petermoto409
Жыл бұрын
Every weld is absolute garbage. How does anything stay together?
@mimechanics1019
Жыл бұрын
They have to work with which facilities they available they are so happy with there work and make there families happy and save because they are addicted to work with these facilities and equipments
@oxboustrophe1392
Жыл бұрын
Note the jigs and clamps used? None. Perhaps what you thought were welds were tacks. The process they use is: Build a template. Tack to the template. Align and tack with fixtures. Weld up parts. Remove fixtures and grind down tack welds. Only saw the weld up of one or two sides. Only one clamp that I saw and it was tacked on. Are you sure you saw any through welding or final welds? I thought the methodology was ingenious and efficient. May try it myself.
@АРТЁМ101-м4х
Жыл бұрын
заЙцЫ это не пРо нИх.....😁
@mimechanics1019
Жыл бұрын
Than what about that?
@assaneseye3199
Жыл бұрын
اللهم أنصردينك على سا ئرالأديانفي الحال ياربي وقدرقلةفي ةتابنا تلكريم إن تلدين عنك هوالإسلام أوكماقلتم وقدصدقت يامولانا كعادتك
@mimechanics1019
Жыл бұрын
Ameen
@warrior4christ777
10 ай бұрын
Save it infidel
@amvedin
Жыл бұрын
The pathetic working method from templates. No wonder Pakistan is in the stone age. What happened to the finished machine. Lost interest?
@mimechanics1019
Жыл бұрын
Please don’t do hate speech
@Чертёнок13-й7б
Жыл бұрын
Пакистан имеет ядерное оружие, это не каменный век, это выше многие стран мира.
@mimechanics1019
Жыл бұрын
@@Чертёнок13-й7б Thank you so much sir for supporting us ❤️🇵🇰 greetings from pakistan ❤️
@umanarayana4205
Жыл бұрын
@@Чертёнок13-й7б they have only that no studies no modern tech
@cuttersgoose
Жыл бұрын
The simplest way to build something is the best way....old school, made by hand products a are better than the crap plastic dog doo from China.
@podgee7507
8 ай бұрын
it.s maybe "Extremely Amazing Manufacturing" in this backwound country, but other country, this would be class as stone-age
@mimechanics1019
8 ай бұрын
Yes you are right sir kindling please tell me where you from😊
Пікірлер: 193