Im an old guy and i grew up during the indoor show car days. Guys would have chromed out minibikes displayed by their show cars. Not a lot of mods back then, but insane detail. Your attention to detail reminded me of those days. I can appreciate the extra effort that you put in your bike. I hope it inspires others to have a healthy pride in their work. Keep it up!
@Guido19
7 ай бұрын
Hey I really appreciate it man. Thank you so much glad it brought you back!
@curby01
10 ай бұрын
I’m going to Walmart later to see if I can find that under glow you used for your bike.
@racingdreamz8021
3 ай бұрын
I use redline 20wt race oil designed for race karts
@Bighemi82
5 ай бұрын
Cool motor a chrome gas tank clean
@fish_R_stinky69
3 ай бұрын
That bike is CLEAN.
@Guido19
3 ай бұрын
Thank you!
@user-gt3xx6lc1o
4 ай бұрын
U need to back off valve adjustment when changing cams
@Guido19
4 ай бұрын
You just need to readjust them afterwards
@mooty765
10 ай бұрын
Built not bought 👍 I like your style 😎
@Guido19
10 ай бұрын
Thank you!!!
@jesussanchez482
4 ай бұрын
What size pushrods are you using if dont mind me asking just ordered that cam
@Guido19
4 ай бұрын
I’m not sure as it was a while ago but they were a bit shorter than stock so there was no clearance issues. What I would recommend is get a pushrod tool to install and adjust it to where your getting maximum opening from the valve but also where the spring isn’t binding and the valves hitting the piston
@draxstice
9 ай бұрын
Around what’s your top speed and what’s the gear ratio?
@Guido19
9 ай бұрын
I get about 63mph and my gear ratio is a secret 😁🤫
@MikeBeatzcom
27 күн бұрын
Will this work on 212 hemi predator?
@Guido19
7 күн бұрын
@@MikeBeatzcom yes you just have to buy the hemi specific cam
@tac.mobinnn7903
10 ай бұрын
What tire are you running on the back? Sick build
@Guido19
10 ай бұрын
It’s a 6in go power sports 13in slick
@joshua4o883
4 ай бұрын
Are you running 26lb springs with the 275 cam?
@Guido19
4 ай бұрын
They are 32lbs!
@MikeBeatzcom
27 күн бұрын
What clutch is that?
@Guido19
7 күн бұрын
@@MikeBeatzcom this one is the noram stinger clutch
@BradFFA
4 ай бұрын
Is this non hemi
@Guido19
4 ай бұрын
This motor is a hemi
@559Minibike_Avil
10 ай бұрын
Why is ur catch can connected to ur pulse pump?
@Guido19
10 ай бұрын
It’s connected to it because we are using the valve cover pulse as the pulse for the pulse pump. It’s connected to the catch can so it can catch the oil but will still utilize the pressure and pulse for the pump.
@kylesyx8432
8 ай бұрын
Why you going with 275 if you already have stage 2 It’s about the same maybe 10% difference
@Guido19
8 ай бұрын
We are going with the F-275 because currently we have a mod 2 cam. This F-275 should be a pretty nice difference from the mod 2 cam but also If you watched my other videos we also installed a big valve head along with a 26mm mikuni.
@jeremycrabtree7683
3 ай бұрын
What jets are you runnin with this setup?
@Guido19
3 ай бұрын
I belive it’s a 120 and a 20 pilot jet
@jeremycrabtree7683
3 ай бұрын
@Guido19 would a cam usually lean your system out thus needing to run bigger jets?
@Guido19
3 ай бұрын
@@jeremycrabtree7683 it really depends on that cam for sure but some with longer durations you may need to adjust the air fuel screw or either swap the jet
@joelnevarez3058
4 ай бұрын
What candies did they send you
@Guido19
4 ай бұрын
I had to buy it unfortunately I wish I got it for free lol
@joelnevarez3058
4 ай бұрын
They sent my friend some nerds and nowlaters and some sucker I thought he was full of crap but he ordered again and got candy again I was tripping out
@Guido19
4 ай бұрын
@@joelnevarez3058 oh what that’s so funny😂😂😂 i thought you were meaning like if they sent me the cam for free lol
@Strict30
10 ай бұрын
first of all your using thea oil catch can as you pule for your pump no good, suppose to go on the intake
@Guido19
10 ай бұрын
Yes very true. Intake manifold pulse is the best and will work the best and give the most pulse but also running it the way have it set up running it off of the pulse of the valve cover that also works well too.
@Strict30
10 ай бұрын
@@Guido19 kewl but remember oil will be in oil and your pump. By the water great video
@Guido19
10 ай бұрын
@@Strict30 yeah that’s the only real downside is that. Appreciated man!
@Strict30
10 ай бұрын
@@Guido19 no problem
@MrLopez-lm4jk
10 ай бұрын
Stock valve train ??
@Guido19
10 ай бұрын
Nope! Shorter Chromoly pushrods and upgraded spring package
@MrLopez-lm4jk
10 ай бұрын
@@Guido19 how do you know what pushrod size u need?
Пікірлер: 47