Very well done! I'm not installing a light or switch panel, yet. I watched because I'm mounting a radio faceplate in the sunglasses holder and wanted to see how to run the wires. Now that I've watched this, I'm kinda motivated to install the light kit. Thank you to you and to the person that said "nice" when you tested the sunglasses holder. 🙂
@jacobsupgrades
2 жыл бұрын
Thank You @KY4LJ I hope your radio mounting goes smoothly.
@ShannonGlenda
2 жыл бұрын
I completed it and it is exactly how I hoped it would look. Thank you for the video.
@jacobsupgrades
2 жыл бұрын
@@ShannonGlenda great! I'm glad it turned out well and my video could help.
@DerekSmith-ym4kn
2 жыл бұрын
@@ShannonGlenda what year truck did u put it in and could I see the final product ?
@ShannonGlenda
2 жыл бұрын
@@DerekSmith-ym4kn 2019 F150 diesel.
@jollyranch1026
2 жыл бұрын
Best music on car video we need more like this
@jacobsupgrades
2 жыл бұрын
Thanks @Jolly Ranch!
@mrblackgabe
2 жыл бұрын
Jacob. Great video, Brett should have a link in his instructions to it.
@jacobsupgrades
2 жыл бұрын
@PeterGosenya Thank You!
@clashwithmoi8926
Жыл бұрын
very well done my guy. very clean
@jacobsupgrades
Жыл бұрын
@clashwithmoi8926, thanks dude. I love it!
@BradBentley-u9p
Жыл бұрын
Appreciate the video @jacobsupgrades. Well done. The only value add I have to throw in... there is a nice path for the wires a little further aft when making the initial run in the overhead liner that lets you avoid having to worry about the wires path being in the way altogether. Literally about 9 inches further back and then up to where you did. Again, great video.
@jacobsupgrades
Жыл бұрын
@user-hk2yw5jq6d, Thank you for the advice that is good to know!
@kustomfxllc.switchpanels3144
3 жыл бұрын
Great looking install!!!! Thank you!
@jacobsupgrades
3 жыл бұрын
I am very satisfied with the KustomFX switch panel! Has that factory clean look.
@LivinWith3M
2 жыл бұрын
Awesome video and channel man. New subscriber here!
@jacobsupgrades
2 жыл бұрын
Thanks man I appreciate the support
@steverow58
Жыл бұрын
Did I miss the second part of this video where you ran the wire through the firewall to battery etc..?
@jacobsupgrades
Жыл бұрын
@steverow58, I show this in a different video below where I wire it up to a relay and light bar. kzitem.info/news/bejne/yK-a33agrKmTm2U
@timhawkins-z7h
9 ай бұрын
Where did you mount the relay and run wires in the engine compartment?
@jacobsupgrades
9 ай бұрын
I ran the wires through the grommet under the driver side dash and put my relay to the driver side of the intake in the engine bay. The wires run low and out of the way and the relay is accessible at the top.
@rickheis9748
9 ай бұрын
Since the battery is located on passenger side why did you use the Drivers side A pillar and not the passenger side A pillar? It would be a shorter path to the battery by going down passenger side A pillar through the firewall and then to battery. Am I missing something?
@jacobsupgrades
9 ай бұрын
@rickheis9748, The existing grommets on the passenger side were full and would not allow for new wiring to pass through. I don't have the provided instructions anymore but I think they even mention to go down the driver side. It would be nice if there was room and access to the passenger side grommets though. Your truck may be different.
@JosephCarpenter700
Жыл бұрын
Seems like the camera operator focused shots on your head, instead of on the cuts that need to be made. Most seem to be out of frame. I can tell you knew what you were doing but cannot see the actual operations. Not much to be done for this one, but for future videos, please have them focus in the work more than on your face.
@jacobsupgrades
Жыл бұрын
@JosephCarpenter700, thanks for the advice. We have learned a lot since filming this video.
@goawayson3156
2 жыл бұрын
Anything for the 2021 F150?
@jacobsupgrades
2 жыл бұрын
@KustomFX KustomFX Brett can you help out with answering this question?
@Bobsairsoft
23 күн бұрын
Is this product still available?
@jacobsupgrades
23 күн бұрын
@@Bobsairsoft I think so. Here's the contact info. Product Link - www.f150forum.com/f122/sale-kustomfx-custom-overhead-switch-panels-365337/index2/ Contact Brett to purchase - lethalweapon09@yahoo.com
@deafcommplays7676
23 күн бұрын
Should be. His website is still up.
@jacobsupgrades
23 күн бұрын
@@deafcommplays7676 good call, he didn't have a website when I bought mine. Here it is for reference kustomfx.net/
@NEALSZ
Жыл бұрын
How much did you pay?
@jacobsupgrades
Жыл бұрын
@Michael Neals, I paid $129 back in May of 2020 for this switch panel. I'm sure the cost has gone up some since then. Reach out to Brett for updated pricing. He has all sorts of switch type selections and colors along with different logos that can be laser engraved.
@NEALSZ
Жыл бұрын
@@jacobsupgrades thanks. I have to repair my sun roof in the spring and then will purchase. Already emailed them. Thanks again!
@MP-qn1jw
Жыл бұрын
At 8:38 he said, "...emergency brake...". LOL Dude! Where's the surfboard rack? $1,000 says no where in the manual for that truck, or ANY other, does it say "emergency brake". LMFAO!!! That is what is called a "Parking Brake". The only other brake on that truck is the "Service Brake". Dude, go back to the beach! Video was alright up until you started to describe things that don't exist. I would have thumbed up, but Dude! Sweet! BRA!
Пікірлер: 37