Buenas tardes amigo, soy de Guanajuato, México, tengo un pequeño negocio de aislamiento térmico, estoy en proceso de capacitación, veo tus videos por qué están muy completos en la información, además son muy motivantes por la forma en la que haces las cosas, gracias.
@bgd3239
2 жыл бұрын
Great way of teaching, appreciate it a lot!
@fredyventura3123
3 жыл бұрын
Great job , master!
@sheetmetalwork
3 жыл бұрын
Thanks Fredy,
@SardarTariqMahmood
3 жыл бұрын
،Thanks
@sergioflores913
2 жыл бұрын
Fácil, nada del otro mundo!!
@noahoyeah
Жыл бұрын
Amazing
@sheetmetalwork
Жыл бұрын
Thank you Noah.
@thepurposeofmyexistence2511
2 жыл бұрын
nice video
@sheetmetalwork
2 жыл бұрын
Thank you very much.
@PaNaMaMa1981
3 жыл бұрын
What's up with the OWL method? I am a first year apprentice so I am not going to act like I am some experienced pro, but an old head at the shop showed me this method and it (majorly) simplified things for me. I was so grateful.
@sheetmetalwork
3 жыл бұрын
I think your looking at the wrong video regarding OWL, This video explains how to fabricate an offset using to elbows………..The OWL method is the allowance you must remove from both ends of a straight piece of duct to CREATE a MITRED OFFSET. But don’t forget this is simply one way to accomplish the mitred duct and that there are others ways also. If your really interested in learning how to fabricate a field mitred or so called slashed duct? Check out my video on how to fabricate a field mitred duct. The important thing here is that you must try and pick up tips and tricks from many Journeymen along the way :)
@AntEng95
3 жыл бұрын
Nice
@sheetmetalwork
Жыл бұрын
Thanks👍🏻
@newfiegangsta22
3 жыл бұрын
Did you add your 2" allowances for slips after?
@sheetmetalwork
3 жыл бұрын
Hi Jay, That’s a good question, in reality on a job site adding an extra 1 inch or 2 inches would not make much difference, but to answer your question if you look back at the video I have been working from my Finishline therefore I would only add 1 inch total if I was working from the 1 inch line or the working line, then I would be adding 2 inches.
@mikerivsrivs9591
3 жыл бұрын
Would this lay out method apply to round elbows as well? Thankyou for the video.
@sheetmetalwork
3 жыл бұрын
Yes it does, The only difference is with round elbows you will have to add an inch and a half for overlap on both elbows, therefore you would do the math and add 3 inches to the net length of the in between pipe.
@mikerivsrivs9591
3 жыл бұрын
Oh ok thankyou that makes sense. Your videos help out a lot as an apprentice just starting out thanks again.
@awaisahmed7380
3 жыл бұрын
Very useful video 👍 thanks for share😊 Please tell use how to check elbow degree 45° 30° and 60° please. I m waiting for your reply thanks.
@sheetmetalwork
3 жыл бұрын
I’m not sure what you mean by how to check elbow degree, sorry.
@huntersf7704
11 ай бұрын
Ack! what's the book?
@sheetmetalwork
4 ай бұрын
book by Joseph J. Kaberlein called Triangulation Short-Cut Layouts page 267.
@samueldiaz8024
2 жыл бұрын
What is name of book
@juanlopezhenriquez8990
6 ай бұрын
From what book did you get that paper.
@sheetmetalwork
6 ай бұрын
Hello Juan, sorry for my late reply but the book is by Joseph J. Kaberlein, the title is Triangulation (Short-cut Methods)
@omozusibenji
2 жыл бұрын
Would this method work the same way with round 45s trying to go up and down obstacles
@sheetmetalwork
2 жыл бұрын
Oh Yes it does, just make sure to add for The overlap on the Big Ends.
@omozusibenji
2 жыл бұрын
@@sheetmetalwork thank you
@omozusibenji
2 жыл бұрын
@@sheetmetalwork 1 more question I’m a helper trying to get better, how would you find an elevation to run ur duct or taps if one isn’t giving on the print
@sheetmetalwork
2 жыл бұрын
@@omozusibenji That’s a difficult one to answer. Is it residential? Commercial? What type of ceiling? Just make sure to run your ideas by your supervisor before doing a whole lot of work for nothing ☹️
@omozusibenji
2 жыл бұрын
@@sheetmetalwork Tenet work ,9 3” Ceiling hanging 10*10 duct, I understand when no elevation is giving you pick one or run high as you can but do you have to calculate the depth of the duct When you pick an elevation or just pick that Elevation
@-slurmdaddy-8147
2 жыл бұрын
Couldn't you measure off the wall and use a laser to go around obstacle high up?
@sheetmetalwork
2 жыл бұрын
Yes you definitely couldThere are many different ways to measure, as there is for most anything else we do in the trade. I believe it;s best to pick up tips and tricks from all the different co-workers and then choose the ones you prefer.
@-slurmdaddy-8147
2 жыл бұрын
@@sheetmetalwork yea I’m starting to pick things up from other workers. I just started hvac few months ago! But I’ll be tuned on on your channel for more insight. Thanks a ton you rock!
@sheetmetalwork
2 жыл бұрын
@@-slurmdaddy-8147 Thank you!
@LIBERTY0RDEATH
3 жыл бұрын
Always heard it pronounced oh-gee offset
@sheetmetalwork
3 жыл бұрын
Your right, Ive heard it pronounced that way many times also. Thanks for the comment. 👍
Пікірлер: 47