Your the only guy that has a problem solving phase which I love . Good way to learn .
@RESQREPAIR
Жыл бұрын
Thanks mate ❤️
@joemoonraker
2 ай бұрын
This guy is great. He was already done, plus hes sick, yet still, hes going to teach you all the way. Thank you brother.
@eddierohdes1099
Жыл бұрын
5years and counting following this great man and his beautiful Kids
@RESQREPAIR
Жыл бұрын
Thanks mate 💯❤️
@MobileService365
Жыл бұрын
Please answer where do you buy stand for your camera. Thanks, respect from russian repair service.
@julio8010
3 ай бұрын
Men just got into your channel. Great explanation, thanks for explaining all the thing like how it works and that. New subscriber, from Mexico. Hope you recover soon
@cheeseface20004
Жыл бұрын
Great video. It would be nice if the tool could allow you to read/write data from a physically damaged camera/dot projector module onto a new module. This is great if the dot projector is faulty, not so great if the entire module needs replacing. Mine arrived today so just need to get a phone to work on hahaha
@jungletechsolomonislands
Жыл бұрын
Your explanation is crystal clear my brother. I need this new and easy method ..hopefully will get this tool soon. Thank you Sir
@RESQREPAIR
Жыл бұрын
Thanks mate ❤️
@superhero1
Жыл бұрын
Is there any limit as it says 2 activations remaining or 10 cloud burns? Do you need to purchase that after you used these?
@ROFT
Жыл бұрын
I already had a JCID V1SE programmer, so I sold that for more than I bought it for, and bought one of these with truetone boards for almost half the price of the V1SE. 👍
@rancillinmontgomery2480
24 күн бұрын
Can I read from old flex to a new flex replacement without tag on flex.
@fieldtech200
Жыл бұрын
best for beginner i am also beginner after this tool i repair face id
@RESQREPAIR
Жыл бұрын
It’s easy to use, yes.
@MrApplePieDude
Жыл бұрын
Great Video! For face id issues ('a problem was detected with the True depth camera' message in face id settings ) How do we know the issue is with the dot projector and not with the other components that face id uses? thanks!
@RESQREPAIR
Жыл бұрын
Learn some more about diagnostics ☺️
@이진아-r7q
8 ай бұрын
I used ay108 to repair the face ID of iPhone x. Face ID has been activated. However, when I start setting up my Face ID, I can't set up my Face ID. Set it up later.A pop-up window appears. How should I solve it?
@xxthemagicherbx1730
6 ай бұрын
Whats the difference between the ay a108 and jcid?
@chinaphonefixteam6300
Жыл бұрын
A108 BOX Restore programmer allows you to read and write information about Apple iPhone's battery, Face ID, and other data. The battery detection board and the dot projector detection board are compatible with our phone repair programmer.
@frromzi9671
7 ай бұрын
si tout l'operation c'est bien passé mais que face id refonctionne pas ? comment faire
@EtienneDeligenza
6 ай бұрын
Do JC programers do the same things as AY now with their flex devices? Do they work as well?
@convertinogsm1946
Жыл бұрын
Which one you would recommend? Like which brand is more reliable in terms of shipping tag on flexes and overall performance? Please if you could answer as I am struggling to find a good brand to work with for this kind of product.
@vicktorcyprus21
9 ай бұрын
Can you make rear camera fix from xr till 14 AY108 MESSAGE fix please
@Muhammedali-h4h
Ай бұрын
How many volt to connect in power supply
@rspaulding
9 ай бұрын
Is there a non-solder method for a damaged infrared sensor flex?
@icare-resq
Жыл бұрын
Hello master, how to solve little lower / little higer, all steps are correct
@ramshad18
Ай бұрын
What to do if i used 2 activation where to get more
@YousefNofal
Жыл бұрын
It can fix the true depth problem only is that right!
@gloryhub685
Жыл бұрын
Pls how can I get this? I stay in Nigeria
@okafordaniel7103
Жыл бұрын
Thanks so much for the video and Please I need help after doing everything Face ID reading wan Normal but after I fix the phone back then the face I di started to say not available then I tasted again with the programmer then now am getting the A and B abnormal I don’t know if I damaged the flex in process please help me
@MposhaOfficial
Жыл бұрын
12:19 Yes, video with exact technical details needed, please
@dmckinney6815
Жыл бұрын
1) plug in flex, plug 108 into computer 2) hit test: everything says abnormal except NTC & I2C, they say normal 3) then I hit back up, that’s successful 4) plug a108 into power 5) then I hit activate, the process starts then I get a message that says: “Abnormal, please remove extension flex cable, or use chip to repair” How do I resolve this issue? Is there a support forum ?
@krezycheri
Жыл бұрын
Same here, have you found a solution?
@iBoyLPs
Жыл бұрын
Thank you for the very in dept information about this vaguely discussed topic. But I have some doubts. How likely is it, that the dot projector/ infrared camera still works and I can read the data on the Romeo (?) chip after a Face ID failure? What causes an iPhone to be in such a condition as in your example? In my case, I have a water damaged iPhone 12 and I’m not sure how to find out if this method (which isn’t quite inexpensive either) will work or not. Therefore I’m very unsure about buying a device such as the AY A108 or the I2C I6S.
@iBoyLPs
Жыл бұрын
Also, in my opinion you could do another video talking further about the Face ID technical aspects (referring to 19:00). Id be very interested if there is any possibility to repair the ir camera as well. I have watched your video about the flood illuminator already but maybe you could summarise what’s possible to repair at this point and what is not. Id also be interested about apples repair method, what will they do when I send my device in.. thanks in advance !
@RESQREPAIR
Жыл бұрын
Hello! This is extended material and we will only supply that in our paid courses. Sorry bro.
@VladislavBaglai
Жыл бұрын
@@RESQREPAIR can I buy somehow only the video materials from your paid courses? Because I can't be physically present on your offline courses. Thanks!
@Spoonz2100
Жыл бұрын
It's possible to do the same, with i6s programmer? just buy the flex tag?
@stephenhill5291
Жыл бұрын
Hi great video I'm having n issue when it comes to connecting the ac power then click activate it keeps saying already activated but its not any ideas would be great ?
@Haries-eg5vq
Жыл бұрын
any solution for I2c break
@ys4115
Жыл бұрын
What I want to do is truetone but don,t have a genuine display I can't download the truetone file. I get a download 1.8 error. Please tell me why. I'm really in trouble. The system I'm using now is * AY108 * windows10/64bit computer *
@michaelmccrudden2532
Жыл бұрын
Hi dr Ben Can I use i2c and flex to repair iPad Pro 3 ?
@Marek21
Жыл бұрын
Very nich video ! Thanks. Btw how do you know about brands like JC etc. that they started producing this tag on flex ?
@RESQREPAIR
Жыл бұрын
Hey. I’m in connection to all of them and they already announced. You can already order 💯
@Moblie.Phone.Service
11 ай бұрын
I have Meijing matrix flex cable can use with Ay 108 box or not ??
@hasinthamadumal7275
Жыл бұрын
I2c short Face ID can this machine use fix without soldering???
@hambaberdosa6474
Жыл бұрын
What tool do you recommend??
@nanagyamfi6778
Жыл бұрын
Hello boss, please I want learn this method and I’m in Ghana so how can I go with it and how can I get this tag on flex
@islamcoherencepertinence.7226
Жыл бұрын
Thank you from France ;-)
@RESQREPAIR
Жыл бұрын
My pleasure.
@sebastianbenjaminsson8265
Жыл бұрын
Isn’t the flexcable re-useable, like battery flex?
@igooro777
Жыл бұрын
Shoot a video about the battery with a programmator ay a108
@ibera4445
Жыл бұрын
does this work for icloud lock phone when we change the chipset on the motherboard and after the id doesnt work can this method fix this probleme ? tanks
@chamaralakshan1872
8 ай бұрын
Is this programmer working with iphone 13 pro max??
@durnin6765
Жыл бұрын
Здравствуйте!!! Вы можете по-подробнее снять видео по замене аккумулятора айфон 11 для программатора AY A-108, за-ранее благодарен.
@charltondacres72
Жыл бұрын
do i have to use the original face id for this to work or
@vegardb
10 ай бұрын
Does anybody know what "I2C Break" means?
@Ori_K
Жыл бұрын
i have an iphone xr and i buy a new logic bord/motherboard and when i install it everything it was alright but the face id doesnt work and the originaly battery says is not genuin if i do the same procedure like you will it work bcs the face id it was with the old motheboard and i put new motherboard with the old face id
@Rob-wx2rq
Жыл бұрын
What is the best way to deal with broken prism glass?
@RESQREPAIR
Жыл бұрын
Replace the prism bro.
@game.generation
Жыл бұрын
Good work can you do for iPhone 12 pro max plz
@jasm5937
Жыл бұрын
excellent explanation!! But if I want to buy at the SMARTPARSTAR store I can't because I live in Spain It can be fixed ? Thank you
@RESQREPAIR
Жыл бұрын
Just write an email to info@smartpartstar.com and we will handle this today.
@mnt0001
Жыл бұрын
I phone 11 pro after screen replacement face id not working why...can you suggest me what i do
@CarlosHugo86
Жыл бұрын
do you know where can i get more credits to activate, because i keep getting errors when activating the flex
@npf21
Жыл бұрын
Wait so could this work if I accidentally got water damage to the dot projector? Long story short my iphone 11 pro max facing down with a protector was facedown on my nightstand and the condensation from the water bottle with ice dripped water and got into the speaker mesh into the dot project i suspect because the front camera has very small droplets around it. trying to find phone shops to fix this in saskatoon canada but no go...
@Fear-pk2hu
Жыл бұрын
this one works with the 13 pro ??
@richarddevivar5377
Жыл бұрын
Thanks Doc Ben
@WalmezTekno
Жыл бұрын
It will work also after factory settings, hard reset, iOS update? Thx
@RESQREPAIR
Жыл бұрын
Yes.
@DM-wu9ik
Жыл бұрын
When prompted to “Activate” and “Burn” why did it say you had a number of attempts left? Will the manufacturer be charging use per Activation and Burn burning services?
@RESQREPAIR
Жыл бұрын
Yes, it is mate.
@DM-wu9ik
Жыл бұрын
That’s not good. If we buy the hardware to fix Face ID that should be it. We shouldn’t need to pay for a service on top of that as well.
@phoneandcomputerworld1750
Жыл бұрын
This is a very good question as the people who are currently selling this device do not mention an per activation cost etc.
@KimoKimochii
Жыл бұрын
I think he means each flex can only be programmed a number of time, i’ve seen this before on some face if cables. can someone confirm?
@Jhuang114
Жыл бұрын
How can we tell if this is the issue with Face ID? On my iPhone 12, Face ID is disabled (as shown in the video) and when trying to take a Portrait Mode selfie, it keeps saying "Move farther away." Is this likely an issue with that part? Is it likely repairable through this method?
@abctips3034
Жыл бұрын
if the front portrait cam says move further then its probably the dot projector
@saikasarla5750
Жыл бұрын
Thk this method is revolution 😅
@RESQREPAIR
Жыл бұрын
Sure mate 👊💯
@ninbuddha1
Жыл бұрын
Cloudbackup menu not working how should i do 🙏🏼
@cillianbyrne1462
Жыл бұрын
i just keep getting the error , LUMINESCENCE ABNORMAL every time i cloud burn the tag ? any help appreciated
@Julien-my1lk
6 ай бұрын
Same did you find a solution at the end ?
@cillian1983
6 ай бұрын
@@Julien-my1lk as far as I can remember in that particular case the fault with the face ID couldn't be fixed with this method , if you look at the front facing camera on the iPhone in question with an android camera do you see two or one red dots ? you can't use an iphone camera as it has an inafred filter
@praneethjayawardane2910
Жыл бұрын
Hello bro i did this with ay but still face id says not available? Y is that?
@Skangster76
Жыл бұрын
Metaltool and battery, jeeeesh :)
@asrmobilerepairstherefurbi7334
Жыл бұрын
Bro , thanks for the video is very complete. I have an 12 pro max with the yogi in short circuit i have move to other flex and still in short .There are any solution for this?
@RESQREPAIR
Жыл бұрын
Hey. Sorry, but i don’t understand what you mean.
@asrmobilerepairstherefurbi7334
Жыл бұрын
@@RESQREPAIR ok bro , the face id part in the front speaker is in short circuit ,is any solution for repair the face id if this part is short circuited?
@bigtreeproductions
Жыл бұрын
Is it the same process with JC V1SE?
@mastertirur930
Жыл бұрын
Any update 😢😢
@RESQREPAIR
Жыл бұрын
You need to wait for an update. But it will be almost the same.
@bigtreeproductions
Жыл бұрын
Danke schoen!
@kindusimegnew6860
11 ай бұрын
Nice work
@Mr.Morkovkaa
Жыл бұрын
did you test any leakage? I think there will be some surprise (maybe I’m wrong)
@RESQREPAIR
Жыл бұрын
I tested some more today, all works fine 💯
@innovatrixrepairs5269
Жыл бұрын
Thank's for the info!
@RESQREPAIR
Жыл бұрын
My pleasure mate
@waynetaylor2784
Жыл бұрын
Do the tag on flex work with jc 1vse ?
@celltech1138
Жыл бұрын
What if we completely changed the dot projector system? Will it work as well
@RESQREPAIR
Жыл бұрын
Like explained in the video - no !
@bootandroid5834
Жыл бұрын
It's nice video but I have one question u removed flex or fixed inside the phone
@RESQREPAIR
Жыл бұрын
Watch the video bro 👊 😍
@bootandroid5834
Жыл бұрын
@@RESQREPAIR u fix inside , is every phone need flex or on flex use for many face id
@Techno_crazy083
Жыл бұрын
We’ll explain
@vicktorcyprus21
Жыл бұрын
how to make software in english language i have its in chinese language
@nanagyamfi6778
Жыл бұрын
And where can I get the AY A108
@benchambers6742
Жыл бұрын
If we have to replace the front camera assembly, would the tag on flex activate another OEM front camera assembly to allow face ID to work?
@RESQREPAIR
Жыл бұрын
No 🥹
@austineoloche7059
9 ай бұрын
What programmer or method can I use to setup a brand new OEM front camera assembly on another iPhone ! Or can I read from another front camera assembly on a different iPhone into my own?
@alessandrocavara305
Жыл бұрын
Do you have to Jailbreak the Device?
@TheKortexgaming
Жыл бұрын
Hello, is it possible to change the battery through this programmer? without pop up message
@RESQREPAIR
Жыл бұрын
Only with transferring the BMS.
@jeandedon
Жыл бұрын
merci .bonne soiree de France.
@RESQREPAIR
Жыл бұрын
Thanks bro. For you too.
@jfixtechnology
Жыл бұрын
if i dont have original dot projector...it is can be repair by this method?
@RESQREPAIR
Жыл бұрын
That’s not possible.
@romaingardes8481
Жыл бұрын
Hi, I can't find the software in France. Could you please send me the link ? Thanks a lot ! :)
@RESQREPAIR
Жыл бұрын
You can find it on the website of the manufacturer.
@leesiphones839
Жыл бұрын
if the original front camera is broken , does this still work with a replacement ?
@RESQREPAIR
Жыл бұрын
No, then you have to replace the cam.
@eddierohdes1099
Жыл бұрын
So sorry for the sickness
@RESQREPAIR
Жыл бұрын
No problem bro. I will recover within a few days.
@ramshad18
Ай бұрын
Hi been
@ericvandebroeck5130
Жыл бұрын
Hello, Is it possible with a repair cable from jc iphone xr . this is already replaced en installed and back broken . I dont have original flex and dot projector is assembled on jc repair cable Thanks
@RESQREPAIR
Жыл бұрын
If you have the original dot with Romeo ic we can do that for you. But not with Tag on method. Doesn’t make sense.
@ericvandebroeck5130
Жыл бұрын
@@RESQREPAIR I have original dot and original cable . But ic chip on dot is broken . What is Romeo ? thanks
@Jzx110
Жыл бұрын
Get well soon bro🤗🤗❤️❤️
@RESQREPAIR
Жыл бұрын
Thanks bro.
@spasspasov2594
Жыл бұрын
I'm trying to find the JC version of the cables, but it sems like they haven't released them yet.
@RESQREPAIR
Жыл бұрын
Qianli released, MiJing and AY. i2c and JC are upcoming next week.
@spasspasov2594
Жыл бұрын
@@RESQREPAIR Great, thanks for the quick response mate!
@mjfaderway
Жыл бұрын
Thanks for the info any links guys??❤
@MrBenzo26
Жыл бұрын
Hi! Weil das im Video nicht rauskommt oder vielleicht habe ich es auch nicht gesehen: Man kann mit der Methode die FaceID/Frontkamera-Einheit auswechseln, solange man die originale Einheit hat und diese noch auslesbar ist - korrekt?
@RESQREPAIR
Жыл бұрын
Nein.
@MrBenzo26
Жыл бұрын
@@RESQREPAIR dann versteh ich den Sinn dahinter nicht… wenn man dann offenbar keine Hardware-Schäden-also die häufigste Ursache von FaceID-Defekten-damit reparieren kann? Wozu ist die Methode dann gut? Keinerlei Kritik, top Video - ich steh grad nur auf dem Schlauch 😅
@Jzx110
Жыл бұрын
I’m confused don’t know wich 1 to buy bro .. i2c or this or mijing or qianli😔😔
@RESQREPAIR
Жыл бұрын
I would recommend i2c bro.
@Jzx110
Жыл бұрын
@@RESQREPAIR thank you brother🤗🤗
@ericguegan-dequeiroz1144
Жыл бұрын
I received this tool the other day and I've got an issue with the software connecting to my phone. A message pops up saying to unlock then trust but the phone does not appear to be connecting to the software. I'm stuck with a useless tool... Any help?
@ericguegan-dequeiroz1144
Жыл бұрын
Just so everyone in the same situation knows, you have to have iTunes installed and working for the software to connect to the iPhone, otherwise it won't work... Dumbest issue ever, but well...
@B13TECH
Жыл бұрын
bro whats happen if the dot projector lens burn?
@RESQREPAIR
Жыл бұрын
Then you need to replace the prism if it’s burned.
@morghanet
Жыл бұрын
Basically, this method transform our FaceID in an Android face detect ?
@RESQREPAIR
Жыл бұрын
No. It does exactly the same as a „normal“ Face ID repair. It works like from factory. Watch the video again bro 👊
@morghanet
Жыл бұрын
@@RESQREPAIR Ok, is that i just speak spanish and the english i can´t ear, just read but, the subtittle is not perfect, thanks aoy anyway
@Cosmozic
Жыл бұрын
You didn’t explain good enough. What exactly was replaced here the earpiece? Was it programmed while old one is installed in the phone or the new one? All you have been replying to is watch the video bro literally don’t make a video if you aren’t going to answer people questions while the video doesn’t give any clear answers.
@RESQREPAIR
Жыл бұрын
If you don’t see or understand what I did here it’s corresponding to a bad skill at your side bro. Sorry. All is explained very clear and if you are experienced enough it’s no problem for you to understand. Keep up man 👨
@jacek2
Жыл бұрын
How many volts does the external power supply have?
@jaybug765
Жыл бұрын
from what i found 19.5v 3.33a 65w
@jaybug765
Жыл бұрын
CT:9A93CE 11V18H17A this is what I found when I was searching for the power supply I went to AliExpress save a pic. Then turned it black and white And tried my best to read the tag
@RESQREPAIR
Жыл бұрын
20V
@isolutionlab8053
Жыл бұрын
Nice
@RESQREPAIR
Жыл бұрын
Thanks mate.
@estudiantepedrojoseolivera771
Жыл бұрын
I can't find the link to download the software
@RESQREPAIR
Жыл бұрын
It’s kn the AY website.
@Krishna-ge5hq
Жыл бұрын
Price
@RESQREPAIR
Жыл бұрын
Check on the website of your supplier. We don’t sell that tool.
@chatersinghubhi
Жыл бұрын
Its good but not success always. Bec proper placement of flex is most important parts of this repair.
Пікірлер: 204