The problem i have with all these you tube videos is they're never real world. Been trying to do this for 6 months and move two 6 volt servos not a pan tilt well yes but 12 inches long which NOPE, never happens. So my robot neck sits their gathering dust.
@tariklassouaoui1635
Жыл бұрын
very inspiring , well explained, I love this channel
@Core-Electronics
Жыл бұрын
Thanks to you 😊 glad you dig it
@innuendoz
Жыл бұрын
This is great thanks
@Videogame9559
9 ай бұрын
Sorry you answered my question at the beginning of the video
@mr.carrot7698
Ай бұрын
would this work if i ran the software on an orange pi 5? as long as i installed all the cameras and required stuff.
@BABALOOEY46
2 жыл бұрын
So good, thanks for sharing.
@Core-Electronics
2 жыл бұрын
Glad you enjoyed it!
@afifzuhairr
Жыл бұрын
to save electricity or lengthen the lifetime of the servo motor, is it possible to add motion sensor first before switch on the camera module? so, the motion sensor would be the first layer security, then camera will catch that motion in sentry mode -> face recognition ! just my two cents!
@Core-Electronics
Жыл бұрын
Very rad idea!
@abdulrhamanalkinani1955
2 жыл бұрын
Thank you so much. Could you please do eyes tracking
@Fraunzi
2 жыл бұрын
THANK YOU so much for this 🙏🙌
@Core-Electronics
2 жыл бұрын
No problem 😊
@Ipsissimus
3 ай бұрын
This is so amazingggggggggggggggggg
@michaellopez3681
25 күн бұрын
Hello, do you happen to know what piece of code i would need to change to use different servos? For context i have a rpi adafruit 16 channel servo hat from your other video. I would like to use that to host my servos but wondering what i need to adjust to use that instead of the board in this video
@geddajayaram6380
Жыл бұрын
when two are identified, which person is identified first?????
@Core-Electronics
Жыл бұрын
Big Question! The AI system when looking for faces I'm pretty sure goes from top left to right then down one row and repeats. If I was to guess the person in the top left of the preview window would be targeted first. Only one way to find out for sure though, Test it!
@ajaykushwah6793
Жыл бұрын
My pi camera is responding very slow.. I m using rpi 4 model b 4 gb...how can I reduce the response time? Like I m waving my hand in front of picamera and it shows after 3 to 4 seconds
@Core-Electronics
Жыл бұрын
That is very slow. To start make sure your Raspberry Pi is getting enough cooling, active cooling would definitely help. As soon as the board gets Hot it'll start going slow. In software you can also lower the pixel count, that will drastically improve reaction time. Hopefully that helps. If hardware is holding you back take a look at the OAK-D Lite, it is quite a remarkable AI Camera compatable with Raspberry Pi Single Board Computers - kzitem.info/news/bejne/mHihrpeArmdodpw
@ajaykushwah6793
Жыл бұрын
@@Core-Electronics thanks ..I will do the same
@pritams_vlog2332
7 ай бұрын
hello sir love from india i have following on youtube since last year very knowledgeable channel is running you come to the point . I need you help on one of my project I am trying to develop face recognition system that system can identify people either he/she in database or not but I didn't get any specific resources I hope you help me out thanks
@woolfy02
Жыл бұрын
I wonder if a stepper motor could be used instead? The only thing I could compare it to is how smooth a c-ram / CIWS operates. (Minus all the weapons). I think it would look amazing if that was possible to setup something like that, with a project like this. It seems like the OpenCV you use, works great.
@Core-Electronics
Жыл бұрын
Absolutely mate 😊 the AI system can remain the same and it can totally be ported to control stepper motors.
@emeobioh7950
Жыл бұрын
@@Core-Electronicsis there a way to record and save the live feed video? I want to build a surveillance camera and need to be able to record the video and save so it can be accessed later
@onojioboardwalk9748
11 ай бұрын
@@Core-Electronics .. Hi could you develop this into an even more advanced version, To be built similar to the predator's shoulder-visor, But attached to an eye-head-piece? To have nightvision/Infrared & Tracking at like in this video? Do you do commissions?
@talismr01
Жыл бұрын
I can do this using a USB camera, instead of one (opencv ai kit)
@Bhardwajkushagra
6 ай бұрын
I couldn’t get my hands on Pimoroni Pan tilt hat but I have a ordinary pan tilt bracket. Can you please suggest me how can I manage with that.
@kerron_
Жыл бұрын
I made similar
@_bruh_420
7 ай бұрын
ik im a bit late but i want to implement a doppler radar (for increased range). and the radar detects movement somewhere, so it tells the pan tilt to point the camera to the area with detected movement. how would i modify this code?
@MrRubion
Жыл бұрын
Thank you for your video. Do you think the set-up also works with the Raspberry Pi High Quality Camera? Or would it be to heavy for the pan-tilt hat?
@thomasgf5948
Жыл бұрын
Hi I have the head (eyes) from inmoov robot but without pimoroni picade pan tilt Hat. I connected directly to Raspberry pi. So i need not download software for it? What i must change from your example. Can you help me?
@fsddsdsd2840
3 ай бұрын
Hello what do I do with this? VIDIOC_S_PARM: failed: Inappropriate ioctl for device I am using picamera v2.1
@Core-Electronics
3 ай бұрын
Sorry to hear you are having issues, I haven't seen that error message before, we have a forum for this guide that might have some helpful information, and if not feel free to chuck a post on their with your issue. Give us a bit of details about your setup and where it goes wrong, we have lots of maker-eyes over there that can help. core-electronics.com.au/guides/Face-Tracking-Raspberry-Pi/
@geddajayaram6380
Жыл бұрын
can it be implemented by using mobile as camera module????
@Core-Electronics
Жыл бұрын
Sounds advanced but you definitely could
@Mohammedalhalabi16
Жыл бұрын
Question: If you disconnect the internet from it, will it still work on tracking moving objects without its connection to the internet, or should it be connected to the internet in order to continue tracking the movement of objects, and if it works, can we make a project to track an object using Arduino Uno
@anasamjad3019
Жыл бұрын
I'm planning to use the same concept but instead of tracking face, I want to track Sun. Is the execution is still the same? I have a pytorch pretrained model currently.
@KJL_offical
Жыл бұрын
Hey can you give me a link to the things i need to buy?
@jsuck2
Жыл бұрын
Incredible project! would it work with Sunfounder Pan-Tilt Hat? or some code should be adapted? Many many thanks!
@jonathanpartidagomez6847
Жыл бұрын
Nice video bro, one question, could a USB camera be used instead of the one you used?
@Core-Electronics
Жыл бұрын
The code will require some tinkering with but you absolutely can 😊 all the Scripts are open source so feel free to modify away.
@fricosu007
2 жыл бұрын
thats a very nice code i see here ! nice work ... question, i want to install this system on a ceiling ... i would add an x y and z axes on the ceiling moving the camera and the rest of its components, how can i add some more code to control the movement of the xyz axes together with the face tracking movements. THANNKS !
@Core-Electronics
2 жыл бұрын
I have a simple Keyboard PAN-TILT Hat control system that you can see here - core-electronics.com.au/guides/pan-tilt-hat-raspberry-pi/ Combining that Script and the one talked about here should get you moving in the right direction. If you need a hand with the Python Language hit up our Workshop - core-electronics.com.au/courses/python-workshop/
@yee2e
Жыл бұрын
Is it tracking face without computer?
@Core-Electronics
Жыл бұрын
All the face figuring out/calculations are done on the Raspberry Pi Single Board Computer 😊
@tech-business-world3721
Жыл бұрын
can we make a 4 dof(using servo motors) robotic arm for pick and place small objects using pi camera to detect object
@umairgujjar4576
Жыл бұрын
Ni usama
@ani80322
Жыл бұрын
Sir can we use Raspberry Pi 3 in the place of Raspberry Pi 4
@wkinne1
Жыл бұрын
Will this work on an Orange Pi 5?
@lovetangTV
7 ай бұрын
Is it possible in Pi 3 as well? Please answer
@Jerseylance1
2 жыл бұрын
Great video, but can I use the code with my dynamixel servos?
@Core-Electronics
2 жыл бұрын
Absolutely, you will just need to alter some specifics in Python so that way your servos gets the right PWM signals sent to them.
@Core-Electronics
2 жыл бұрын
Depending on the current draw you may want an extra power input. Check this guide for wiring tips with a servo and a Raspberry Pi 4 Model B - core-electronics.com.au/guides/control-servo-raspberry-pi/
@LI3AXE
2 жыл бұрын
Hey, followed all the instructions but this error keeps coming up. enabled i2c, but problem persists ? Any solutions? File "/home/pi/track/facetracker.py", line 37, in pan(cam_pan-90) File "/usr/lib/python3/dist-packages/pantilthat/pantilt.py", line 466, in servo_one self.setup() File "/usr/lib/python3/dist-packages/pantilthat/pantilt.py", line 80, in setup self._set_config() File "/usr/lib/python3/dist-packages/pantilthat/pantilt.py", line 118, in _set_config self._i2c_write_byte(self.REG_CONFIG, config) File "/usr/lib/python3/dist-packages/pantilthat/pantilt.py", line 209, in _i2c_write_byte raise IOError("Failed to write byte") OSError: Failed to write byte
@electrictnt4482
Ай бұрын
Were u able to figure this out? Having the same issue
@balyazulfikar4155
2 жыл бұрын
hi great video and thanks for the compelte explain im wondering have you ever create project with raspi+usb cam to counting people in a room? best regards from me
@Core-Electronics
2 жыл бұрын
I've done some work with the OAK-D Lite and one of the machine learnt systems that it runs counts people in a room/as they wall past. Once you locate the exact Python script you'll be able to base your code in your system on that 😊 - core-electronics.com.au/guides/raspberry-pi/oak-d-lite-raspberry-pi/
@immrinzler7814
2 жыл бұрын
Hii , does Open CV is to be need open on system for working of tracker , does it still work after just installing code on rasberry pi?
@Core-Electronics
2 жыл бұрын
You need the Open-CV packages to be installed so that it can do the face and movement detection aspects of the code
@nathanbowser609
2 жыл бұрын
Any advice on using this base in a SAR have application. Particularly night time wild game census taking. I want to build a diy eo/it up to 4 sensors. LWIR thermal sensor; RGB spectral with adaptive zoom, and LRF laser range finder are the big three. I need the computer to run BG separation, temperature threshold, and object recognition. end result should be a dark granular background; only things above threshold have color, and camera and gimbal zoom and move to keep target in frame. The info is not readily available out there, I’m picking from 15 year old experience, and articles buried deep on the internet. This stuff isn’t restricted or illegal, but there’s definitely an unspoken agreement to not make it readily available
@Core-Electronics
2 жыл бұрын
Now that makes for an amazing project! DIY object detection and face tracking is in its infancy but I have no doubt people will keep pushing the thresholds on what is possible. If you do nail your plans please share 😊 it would make for an incredibly powerful tool for all kinds of applications.
@juheonchu6322
2 жыл бұрын
If installing the binaries with those sudo codes, may I ask you any alternatives?
@Core-Electronics
2 жыл бұрын
Not 100% sure what you mean, but if you go through all the steps your setup will be good to go!
@jonathanpartidagomez6847
Жыл бұрын
Can I use a Raspberry pi 3A+???
@Core-Electronics
Жыл бұрын
It should work 😊 you may need to overclock that Pi a little bit to keep up with the computational demands.
@digitalbirdfilm
11 ай бұрын
Great work I have been looking for a way to add this functionality to the Digital Bird DIY camera control system and this might just be what i'm looking for. Do you see any problem using an HDMI to Pi4 camera board in place of the Pi camera?
@onojioboardwalk9748
11 ай бұрын
Could you build one of these for me, Like a commission? But with some added fearues?
@user-ei9yz6vm4t
2 ай бұрын
руки індуса в нього це така фішка? типу якщо відео технічне і не від індуса дивитися не будуть?
@geddajayaram6380
Жыл бұрын
will it be implemented using pi4 and 3
@berk1953
2 жыл бұрын
can ı do this with raspberry pi 3 model b+ ?
@Core-Electronics
2 жыл бұрын
It definitely will, just at a slower FPS.
@berk1953
2 жыл бұрын
@@Core-Electronics that's fine, as long as there's no conflict in the code :) thank you..
@claybrd
2 жыл бұрын
Would this work with a raspberry pi 4B 4GB or does it need to have 8GB?
@Core-Electronics
2 жыл бұрын
It will definitely work with lower RAM Raspberry Pi 4 Model B 😊
@DarrylAdams
2 жыл бұрын
When people talk with horror about facial recognition and mining done by the big data companies and government, I point to openCV and say this tech can be done by anyone, so evil is now dramatically easy for anyone to do. And with the Pu, cheap too!
@epluribusunum5318
2 жыл бұрын
@Darryl Adams True, but an individual can do little but dox with it. A corporation or government can do almost anything.
@onojioboardwalk9748
11 ай бұрын
.. Actually this can be turned into a self-defense weapon with a multitude of functgions.. So its not 'Evil' in the hands of good people.
@berk1953
2 жыл бұрын
Hİ, In the "make -j $(nproc)" command, the loading process may take a very long time, even the screen may freeze, you wrote on your page. It came up to seven percent, then the screen froze, I'm being patient as you said, but it's been 2 hours, is it normal? :) should ı wait?
@Core-Electronics
2 жыл бұрын
2 Hours is definitely tooo long. Give the system a hard power cycle then type that same "make -j $(nproc)" command into a new terminal with it focused on the right folder structure. So it will be the following. cd ~/opencv-4.4.0/build make -j $(nproc)
@user-iw7ii4lu6h
2 жыл бұрын
did the code can tracking after full body not just face?
@Core-Electronics
2 жыл бұрын
You can definitely replace the face detection layer with a object detection layer that focuses just on human bodies 🙂It would take some tinkering with the Python code. Check out this guide on how to set up object detection - core-electronics.com.au/tutorials/object-identify-raspberry-pi.html
@user-iw7ii4lu6h
2 жыл бұрын
@@Core-Electronics i need a full body not faces is it possible?
@Core-Electronics
2 жыл бұрын
Come check this out mate - core-electronics.com.au/tutorials/pose-and-face-landmark-raspberry-pi.html
@Videogame9559
9 ай бұрын
H I would this work with the 16 servo control board and camera module or would I need to change the code. I have pan and tilt mount.
@imenguechtouli1518
4 ай бұрын
i have the same question!
@johnjayveec.alindayo9278
2 жыл бұрын
Its possible to detect the faces with temperatures? Thanks
@Core-Electronics
2 жыл бұрын
I've seen thermal cameras run with face/human detection - kzitem.info/news/bejne/yaavvWiCsJp9Z2k For this Pan-Tilt system if you added a Laser Thermometer you could definitely achieve that goal - core-electronics.com.au/non-contact-ir-thermometer-sensor.html
@johnjayveec.alindayo9278
2 жыл бұрын
@@Core-Electronics Can i contact you on gmail?
@johnjayveec.alindayo9278
2 жыл бұрын
@@Core-Electronics I saw now the SENO206? Did you know how to do that with temperature sensor?
@Core-Electronics
2 жыл бұрын
If your running into issues or want help with your project the best place for us to help is on our forum and as we'll be better able to help 🙂 forum.core-electronics.com.au/
@johnjayveec.alindayo9278
2 жыл бұрын
@@Core-Electronics do you have any idea how to get face detection with temperatures using adafruit mlx90640 using raspberry pi?
@amreenmander3809
2 жыл бұрын
Great video! Quick question: Are we able to use the HAT without directly mounting onto the Pi so that the other RPi pins aren't covered and may be connected to other outputs (e.x. to control a relay or LEDs). Meaning if we mount the hat to a breadboard instead and use jumper wires to connect the 5V pin and 3 GPIO pins (2,3,16) from the RPi, will this still work?
@Core-Electronics
2 жыл бұрын
This is the GPIO Pins utilised by the HAT - pinout.xyz/pinout/pan_tilt_hat So long as you connect the Pan-Tilt HAT to those required pins it will work. Whether it is installed as a HAT or on a Breadboard. You are then able to use the other free GPIO Pins to control whatever you desire 😊.
@Bhardwajkushagra
7 ай бұрын
i dont have pimoroni pan tilt hat but another one. can you tell me how to directly connect servos to rPi
@macixmajsterkuje5799
2 жыл бұрын
Can I use raspberry pi zero to do this?
@Core-Electronics
2 жыл бұрын
Because the computation is so high with computer vision project like this I would reccomend using the Raspberry Pi 4, the delay using a Pi Zero I reckon would be too great for functional use.
@CreativeGraphicsGroup
2 жыл бұрын
@@Core-Electronics Maybe a Pi Zero 2 W? (If you can get one...)
@adamakmal9401
10 ай бұрын
Hi great video where can I get the coding for it
@Core-Electronics
10 ай бұрын
Hey, its in our guide linked below. Also here: core-electronics.com.au/guides/Face-Tracking-Raspberry-Pi/
@oscar-vf6vi
2 жыл бұрын
Is the hat absolutely necessary?
@Core-Electronics
2 жыл бұрын
Is definitely the easiest way to set up a Pan-Tilt System with a Raspberry Pi. There are other Pan-Tilt Hats but you will need to adjust the code running the system to accommodate for them. If your only interested in Face Identification come check out this - core-electronics.com.au/guides/face-identify-raspberry-pi/
@Jirayu.Kaewprateep
Жыл бұрын
📺💬 Face recognition by raspberry pi, face detection is paused when you create a new alignment from the center. 🥺💬 You are correct that is for speed, you need to read about machine learning for face recognition task it is multiple convolution layers as filters do and dense layers with learning weight which means you can make it smarter as Google neurons net but it will require a lot of processes. 🥺💬 I think it is by the program intention to be able to run on raspberry pi, can you try adjusting parameters or mode⁉ 📺💬 How about this ⁉ 🥺💬 You may using stack frames it will little bit slow but good with moving object. 📺💬 Threshold sensitivity 🥺💬 Same as filters but you use the standards training from factory or pre-trained weights. 📺💬 I know about that. 🥺💬 It can be contrast colours but it also can be object weights or other function as weights that we called pre-trained weights.
@ThaTownsNyC
11 күн бұрын
Now just add a glock 17 and ur all set free aimbot
@nikachachua5712
2 жыл бұрын
hello bro , im new on raspberry pi (still waiting till i get zero w ) , im using pycharm on windows 10 to code with python , i dont know how to set up everything on raspberry pi so can u help me or link me where i can learn everything step by step? need to use rpi zero w with my codes from pc
@Core-Electronics
2 жыл бұрын
Hey mate, an absolutely great starting point is our Raspberry Pi Workshop - core-electronics.com.au/tutorials/raspberry-pi-workshop-for-beginners.html
@nikachachua5712
2 жыл бұрын
@@Core-Electronics thx 🙏 sorry for another question but i have to , could u help me to find tutorial or library or software to control action of robotic , for example i made rpi dog and want to make easy virtual motion and want to use that on real live rpi dog? pls help one more time ❤️
@Core-Electronics
2 жыл бұрын
All depends on what hardware your using to control the movement of the Robot. If your using Servos this is a great starting point - core-electronics.com.au/tutorials/control-servo-raspberry-pi.html
Пікірлер: 111