I just purchased a V5 and am new to faceting. Still waiting to receive it. This was a fantastic overview of it operability. Really appreciate your detailed presentation. Thank you!
@GermanGemcutter
3 жыл бұрын
Congratulations👍 Thank you very much🙂
@ceciliabruck3570
Жыл бұрын
Thank you. I have been trying to figure out the machine with the instructions and your presentation was a big help. I think I am ready to go.
@GermanGemcutter
Жыл бұрын
Thank you very much for watching and your kind words. Happy Faceting Cecilia
@jamesmclaughlin1112
2 жыл бұрын
I had a 40 year old machine.Thank God that someone explained the v5. I have the SL. I think it’s called. I love it. Still getting used to it. I love your simple explanations.Love your shows. Jim
@GermanGemcutter
2 жыл бұрын
Thanks for watching and your kind words
@mikesackos2208
3 жыл бұрын
Great job explaining all the features of the V5!!! Super!!
@GermanGemcutter
3 жыл бұрын
🙂Thank you very much Mike💎
@antoniawakonig5922
2 жыл бұрын
I had an old version. Recently I purchased Sri Lankan Ultrafacet FPSS2 faceting machine from Gemlapidary site. With my hand on experience it's faster and doesn't have any issues of over facet.
@GermanGemcutter
2 жыл бұрын
Sounds great👍 Thanks for watching🙂 Happy Faceting💎
@GemLapidary
3 жыл бұрын
Thank you ❤️
@GermanGemcutter
3 жыл бұрын
With pleasure👍
@Liburni
3 жыл бұрын
well presented, thank you very much, it is a really fantastic machine, I would only ask if you can what type of engine is how much power it has
@GermanGemcutter
3 жыл бұрын
Thank you very much🙂 i will check it and send the answer later👍
@sodalines
2 жыл бұрын
for 5k it better be the worlds finest
@matteoobertoprospector
3 жыл бұрын
Top!!
@GermanGemcutter
3 жыл бұрын
Thanks for watching my Friend👍
3 жыл бұрын
Top
@GermanGemcutter
3 жыл бұрын
Thanks for watching🙂
@instagem2693
2 жыл бұрын
Very informative:)
@GermanGemcutter
2 жыл бұрын
Thank you🙂
@eskibrah200
2 жыл бұрын
You should order a VJ faceting machine and make a comparison video.
@GermanGemcutter
2 жыл бұрын
Very good idea, maybe there will be an opportunity one day.
@saitoichii7232
Жыл бұрын
Hello I am left handed , what is your advice to me for buy left handed or right handed ultra tec V5 faceting machine ?
@GermanGemcutter
Жыл бұрын
The best is to try both variants beforehand, if it is possible. I am right handed and selected the right handed V5, just my personal choice.
@jetegtmeier71
Жыл бұрын
instead of using multiple adapters just use one and an American power strip for 110 like your German power strip your plugging into for 220
@GermanGemcutter
Жыл бұрын
Thanks for your helpful Tip. Good solution! On my new working table i use a bigger 220V Power Strip with just 2 small Adapters(110V), it is more comfortable for me because there is only one socket in this area and i have multiple Lamps, Equipment and other Machines for 220V.
@susanhj9143
2 жыл бұрын
Please can you let me know how this compares with the Facetron? I am a novice and have only used the Facetron and am thinking of purchasing one. Thank you! 😊
@GermanGemcutter
2 жыл бұрын
Hi Susan, sorry, but I haven't had a chance to test a Facetron up to this point. Thanks for watching.
@nicooolai
2 жыл бұрын
So, where in europe do you buy an ultratech? I would love to avoid shipping, customs and taxes from US.
@GermanGemcutter
2 жыл бұрын
Unfortunately, i dont know of any Dealers in Europe for UltraTec Machines. I also ordered my Machine directly from UltraTec at the time. In any case, you don't have to worry about the delivery, the machines are packed extremely well👍 UltraTec has a lot of know-how when it comes to Exports from the USA, they serve Customers worldwide. All the papers you need will be provided. An inexpensive Service provided by Fed Ex cleared customs for me. This saves a lot of time and makes everything about the import very comfortable. I can really recommend it to everyone. Otherwise you have to find a used Machine here in Europe, but very hard to find, because most Gemcutters worked for a lifetime with their Machines. Btw: Dealers in Europe also have to pay all fees customs taxes and so on for an Import. As a customer, you pay for them one way or another.
@naturalgemstones8633
Жыл бұрын
I have one for sell
@w3vjp568
5 ай бұрын
Ugh! $5,590 for the machine only, add another $1040 for laps and polish. Wish I could afford that…
@riquezasnaturais3576
2 жыл бұрын
Alguém ai tem a umildade de mim doar uma catraca desa ultratec ou outra parecida pra mim colocar na minha maquina caseira porque eu não tenho condições financeira mais sou louco por lapidaçao
@andyaaruckus1219
3 жыл бұрын
Nice machines, to bad they don't return phone calls.
@OCSynthesis
3 жыл бұрын
Hi Andy. Sorry to hear you didn’t get a call when you expected one. Please don’t judge us too harshly. Please do call into the factory on +1714-542-0608 8am - 5.30pm PST - ask for Robert Mendoza. Or alternatively drop an email with your questions to info@ultratec-facet.com. Thanks!
@johnelliott7020
2 жыл бұрын
You lost me with the music introduction - 30 seconds of wasted time
Пікірлер: 38