This shit crazy… I’m 26, I’ve been cutting hair since I was 13 with the same clippers and just now figuring out this information 😅… granted I never went to school for this. But I’ve always wondered why it took me so long/ much effort to get my fades right… Now I know this, my fades about to be outta this world🙏🏽 Thanks fam
@Seancutshair
Жыл бұрын
🙌🏻🙌🏻🙌🏻
@Tigerbalm1310
7 ай бұрын
Get your license or you will always be stuck in the same place
@mcclaincuts
2 жыл бұрын
Not trying to sound like a butt head but the taper blades when zero gapped are closer to 2mm-1.7mm open and about 0.7mm-1mm closed. I know this because I used a digital caliper to get the measurements. What I did was place one side of the caliper on the tip of the moving blade and the other on the outside of the still blade. Take it with a grain of salt, results will vary but you can get pretty good results to help you with your haircuts. Awesome videos brotha blessings.
@Seancutshair
2 жыл бұрын
Yeah of course it can vary depending on how it’s gapped. Just stating the measurements listed on the blades
@dustinlambert1545
Жыл бұрын
Been cutting a long time but never really had this info presented so well... Good shit homie
@Seancutshair
Жыл бұрын
Appreciate it 🙏🏼
@HamzaChaudhary-eu3ev
Ай бұрын
Hey Sean please respond, I’ve just bought the babyliss snap fx clipper and trimmer what taper blade do you reocmmend for the clipper and what blade for the trimmer, will really appreciate it ❤
@Seancutshair
Ай бұрын
I’d put the new MIM blade on it, and a fine tooth trimmer blade either gold or gunmetal
@HamzaChaudhary-eu3ev
Ай бұрын
@@Seancutshair mim blade is a fade blade no?
@timothyjhill5520
Ай бұрын
Those video Is puré gold, You can watch 35789 cute tutorials but without this info Youll always be límited
@SleepyJoe408
Жыл бұрын
So pretty much if I have a fade blade , I really don’t need a “faper” right? I might as well get me a clipper that has a taper blade right? A fade blade is mainly to knock off that hard line created with the trimmer right?
@Seancutshair
Жыл бұрын
Yes you nailed it
@Evan........
22 күн бұрын
What blade would you recommend to use for a beginner trying to do a high fade? with the self cut system dark night clipper how much would i have to adjust the blade for that? What's a good starting trimmer and shaver as well?
@RevvedUpModz
5 ай бұрын
Once I finally figured this out I had a better understanding of what blade to use depending on what I’m doing 💯💯
@Seancutshair
5 ай бұрын
Right on 🙌🏻
@209_alejandro
Жыл бұрын
What blades do you recommend for my Babyliss clipper & trimmer?
@Seancutshair
Жыл бұрын
I like the graphite taper blade and the graphite fx707b trimmer blade
@danieljerloew
2 жыл бұрын
Sean, for the average hobby cutter on friends and family.. i have the magic clip with fadeblade and it sometimes snag, as you mention. Would you go with the 1006 taper wahl blade or the SC fusion / taper blade on the magic clips?
@Seancutshair
2 жыл бұрын
Either one. The fusion is my go to now but haven’t put it on any wahls. The ole faithful 1006 always did me fine 👌🏻
@MirchoTheBarber
9 ай бұрын
Best taper blade for wahl ? Im looking at babyliss blades looks a bit thinner than the old wahl taper blades. Does gamma taper fit wahls?
@Seancutshair
9 ай бұрын
Wahl 1006
@nestorbarajas3459
2 жыл бұрын
I did a cut today with the fusion blade and man I wasn’t used to it cutting that low! The open fade felt lower then the tape blade. Definitely have to get used to it!
@Seancutshair
2 жыл бұрын
It’s a little different for sure!
@arthurstepanyan100
2 жыл бұрын
Great video bro! I was wondering, how often do you have to change the regular (taper blade) &/or cutting blade on the x-ergos and how much use on a scale of 1-10 do you put into that blade? (Asking bcause the gammaplus site says they recommend changing the dlc fusion blade every 1-4 months) but says nothing on the other blades, and I'm looking to get the regular taper blade.
@Seancutshair
2 жыл бұрын
Honestly I don’t hardly ever change blades. I switch clippers often so don’t notice it being an issue. I’d follow their recommendation and I’d imagine it’s the same for all their blades
@sangluu1713
6 ай бұрын
Thanks for this vid Sean! One thing I’m slightly concerned about is whenever i turn the clipper on, I occasionally hear this small click noise, Should I be concerned? Or will it go away after a while
@Seancutshair
6 ай бұрын
I’m not sure exactly the noise but it may be normal
@THEGOLDENFAMY
8 ай бұрын
What is a better boosted fx with faper, and magic clip with fade blade , or opposite?
@Seancutshair
8 ай бұрын
Boosted with any blade
@BlakeSuperior_Beats
2 жыл бұрын
Such an informative video! Would have liked to see you also cover making sure the blade is centered so the moving blade doesn’t go further to one side or the other when you’re using corners to fade.
@Seancutshair
2 жыл бұрын
Dang sure did leave that out lol
@Shermthebarber
Жыл бұрын
One question so original corded Andis masters I have the blade on my JRL now so that’s a fade blade ? Does the masters make a taper blade or is a master blade a masters blade ? I see they have different master options I see #22 and #28 for replacement options. Let me know your insight please. I will follow what you tell me to do I base what I do mostly off you brotha.
@Seancutshair
Жыл бұрын
I don’t know a ton about andis but they do make a taper blade. The 22 and 28 is how many teeth there are on the blade
@plzgetmeto7kformyfamilyplz466
Жыл бұрын
I’m new and wondering which one guard would be good for a high taper
@Seancutshair
Жыл бұрын
I recommend taper blades for new barbers. They’re a little safer
@dommybigshot21
10 күн бұрын
So is the wahl stagger tooth blade considered a fade blade or a taper blade
@bobbystillz222
Жыл бұрын
I don’t get why they just don’t do a taper blade and just make it as thin as the fade blade up in the front. So I can take the line out. I’m not a genius or inventor, but shouldn’t that be possible. It works with my StarCraft taper blade. I file the edges down and it takes the lines out now. Why can’t they just do that for us and give us a blade like that. I have the perfect blade. If anyone use my clipper, they would be shocked.
@Seancutshair
Жыл бұрын
🤷🏻♂️
@jamessinclair833
2 жыл бұрын
I started putting my bald line in with a closed fade blade and found my foil blends into the line just as smoothly as if I used my trimmer. Game changer
@Seancutshair
2 жыл бұрын
👌🏻👌🏻👌🏻
@alexmantanona9594
8 ай бұрын
Hey Sean, I recently bought a stagger tooth ceramic blade will it work if I use it on a super taper still blade?
@Seancutshair
8 ай бұрын
It should!
@grassothebarber606
Жыл бұрын
The fusion blade is really a fade blade its super thin even thinner than a wahl fade blade. Only difference is the ridges on it, great for the skin line, but cuts very short and unforgiving.
@Seancutshair
Жыл бұрын
Yeah it’s similar. It still cuts slightly different than a fade blade though
@kashingchainsllc4816
Жыл бұрын
Just ordered the black fx boost+ for my first ever clipper and trimmers, is that wedge blade gonna be something I don’t wanna use ?
@Seancutshair
Жыл бұрын
It shouldn’t have a wedge blade you’re good
@ryandsoriano
4 ай бұрын
Hey Sean! I hope you see this - I appreciate all of your help and guidance man, you've been monumental in my barbering journey. Quick question - do you prefer the babyliss graphite taper blade over the DLC titanium, or would you go either way?
@Hoganhair
Жыл бұрын
If the master blade is a true faper blade then is it worth modding my wahl instead of buying the gamma fusion blade?
@Seancutshair
Жыл бұрын
I don’t understand. The master has a taper or fade blade. Fusion / taper is totally different
@dustinlambert1545
Жыл бұрын
Can you add this filthy mod to BaByliss Gold Fx clippers and then have it work with Magic Clips stagger tooth blade? Without modifying the cam follower?
@Seancutshair
Жыл бұрын
I’m not 100% on that. Would have to hit up Phil
@d3arb0rns
Жыл бұрын
I just replaced my fade blade with the taper blade but every time I tighten it down the blades moves outward (babyliss clipper). Any suggestions???
@Seancutshair
Жыл бұрын
Just have to hold it in place real solid when you tighten it
@bigscreech1285
Жыл бұрын
Bro will you send me a pair of clippers you don’t use so I can frame them I’m a huge fan
@Seancutshair
Жыл бұрын
Man I got a project I’m doing with my extras. You’ll see soon
@disc_golfing_with_d
Ай бұрын
I’ve had great luck with the TPOB taper blade. It’s, for me, the perfect in between. Like the SC Fusion blade it’s a wedged taper blade.
@dreamchasero3650
Жыл бұрын
Do you need mod for whal clippers with stylecraft blade?
@Seancutshair
Жыл бұрын
Shouldn’t. They should be the same
@jt2475
7 ай бұрын
I tried the faper blade and really wanted to like and it seems everyone is making that style lately but I like the way taper blades fade more. I use the faper with a ceramic staggertooth blade to blend out my last line but that’s it.
@Seancutshair
6 ай бұрын
I used taper blades forever!
@hectornumerordmejia8866
Жыл бұрын
Which fade blade doesn't get stuck on clients pores? 🤔
@Seancutshair
Жыл бұрын
I don’t use any fade blades partially because of that so I’m not sure
@makkavelli3972
2 ай бұрын
Whats the Cerematic blades then???
@AlexRodriguez-vc7fb
9 ай бұрын
I need that fade blade , taper blade is to long and throws off my whole cut
@Seancutshair
9 ай бұрын
Get you one!
@davidsee3566
Жыл бұрын
Hey there Sean, love your videos and content. The education here is incredible, especially for new barbers and for those that like to experiment to see what works best for them! I personally like to have all three blades at my station faper, taper & fade blades. I have yet to try the Babyliss wedge blades. Plan on trying those next.
@Seancutshair
Жыл бұрын
Yeah they all have their place! Wedge is def my least favorite you aren’t missing out!
@JLBarberPro
2 жыл бұрын
great video my guy! 🙌🏼 currently waitin on my philty mod package to come thru - got the andis master fade blade wit da strrreetch bracket for my wahl seniors, ya digg! 🔥
@Seancutshair
2 жыл бұрын
💪🏻💪🏻💪🏻
@augenmaugen
9 ай бұрын
Whoever decided these blade names is messing with me. I’ve always used the terms “fade” and “taper” as sort of interchangeable (though i know they’re technically slightly different) but I have an incredibly hard time remembering which blade is which haha.
@Seancutshair
9 ай бұрын
Fade blade is shorter. Taper blade is thicker and tapers off
@augenmaugen
9 ай бұрын
@@Seancutshair thank you! And kudos on a great channel.
@BEARDED_VATO
2 жыл бұрын
That fusion blade seems similar to the wedge blade that came on my lopros
@Seancutshair
2 жыл бұрын
I wouldn’t say fusion is like the wedge. It’s more like a fade blade with the grooves from a taper blade
@zoomberr
Жыл бұрын
what blade would you recommend to use for wahl seniors?
@Seancutshair
Жыл бұрын
I always used the Wahl taper blade #1006
@Texasgirl2023
8 ай бұрын
What do you mean when you say the taper blade is going to cut longer?
@Seancutshair
8 ай бұрын
It is thicker and has a bevel so if you were to cut side by side to a fade blade it would be longer
@manyogurt4645
5 ай бұрын
Nice vid. I'm also feeling the automotive shop storage at each station. Good idea.
@Seancutshair
5 ай бұрын
💯💯💯
@ZNP25
10 ай бұрын
I just got troll clippers and I took that top blade off to clean and the cutting blade came off too. When I put it back to how I thought it was now they are crazy loud. I pulled it off and flipped it and it was still crazy loud. Not sure how to reinstall this blade. I’m not a barber, just someone that stumbled onto your page when I needed some new clippers.
@Seancutshair
10 ай бұрын
Hopefully you figured it out from watching this
@ZNP25
10 ай бұрын
@@Seancutshair I put them on the way you did and it’s still loud 😬
@ReaperRells
Жыл бұрын
So Sean, you dont use that Seniors mod with the andis blade anymore? You did a dope video on it so i was wondering if you still use that mod seniors and if not, why so? Salute
@Seancutshair
Жыл бұрын
I don’t. I really don’t like the purple guards so went back to the regular blade
@deveanvilla4389
Жыл бұрын
What taper blade do you recommend For wahl seniors?
@Seancutshair
Жыл бұрын
Wahl taper blade is fine. They’re all similar though
@omarfelix5540
5 ай бұрын
If you zero gap a taper blade does it change the measurements by a lot? Or it doesn’t really make a difference? Besides taking out the trimmer line
@Seancutshair
5 ай бұрын
Not a huge difference
@omarfelix5540
5 ай бұрын
@@Seancutshair not enough to change ur fading steps correct I’m asking because I fade without using a half guard only a number 1 but I wanna zero gap my fading clippers
@jaym4734
Жыл бұрын
Can i fit a babyliss taper blade on a style craft instinct or stylecraft ergo ??
@Seancutshair
Жыл бұрын
Yes it will fit
@Shermthebarber
Жыл бұрын
This video answered every question I had about this topic. Such quality information and media also. Did you end up doing the trimmer vid? Also I see now why you have two x ergos on your staton and why. I understand the concept of millimeters you break down in some vids. Def replacing a couple clippers with fade blades def my FX’s. Thanks bro. Again.
@Seancutshair
Жыл бұрын
👌🏻👌🏻👌🏻
@3xternal570
2 жыл бұрын
Hey sean do you know if I can put fusion blade on magic clip cordless !
@Seancutshair
2 жыл бұрын
Should fit 👍🏻
@Supreme_Sole
9 ай бұрын
Can u put the style craft faper blade on any clipper
@Seancutshair
9 ай бұрын
Not any clipper but most. Andis and oster wont fit
@nxte.b
2 жыл бұрын
Hey question, does the fusion blade work on other brand clippers like andis and whal?
@Seancutshair
2 жыл бұрын
It would probably fit Wahl but not andis the screw holes are different
@nxte.b
2 жыл бұрын
@@Seancutshair okay, i was wondering if it'd fit on a andis envy, I wanted to gift it to my barber friend
@eunicecaps7794
Жыл бұрын
can you share your other clipper to me hehehe so impressive i learned more your content
@Seancutshair
Жыл бұрын
Good to hear!
@UNKNOWN-ou3pg
Жыл бұрын
Will the fade blade also rattle the guards if zero gapped or just the taper blade ?? Wanting to switch to a fade blade on my pair as that’s my preference but want to be able to zero gap them all the way without a problem as I feel that’s the best advantage of them is they cut so close zero gapped which lets me get a super clean blend . Also Very informative straight to the point video🔥
@Seancutshair
Жыл бұрын
Anything zero gapped has the potential to rattle guards
@camjo6397
Жыл бұрын
Can you mix and match the top and bottom of blades? I want two different colors so I can see where the actual cutting blade is. I just started cutting so it’s hard to see where the cutting blade is when the lever is open. That white cutting blade you have is probably the best for contrast on dark hair right? Can I put that under my gold babyliss pro wedge blade?
@Seancutshair
Жыл бұрын
It depends some blades are interchangeable but not all. Would just have to try
@camjo6397
Жыл бұрын
@@Seancutshair Oh awesome thank you! From your experience, do you think a brighter/different color cutting blade would help you see it while cutting?
@keanandarnell8709
Жыл бұрын
I know you probably answered this before but can you put a S.C faper blade on Wahl magic clips??
@Seancutshair
Жыл бұрын
Yes
@keanandarnell8709
Жыл бұрын
@@Seancutshair thank you!!
@junonboy3684
Жыл бұрын
Bro Blade for babyliss Lo pro fx what ur choice?
@Seancutshair
Жыл бұрын
Babyliss taper blade on mine at the moment
@Texasgirl2023
8 ай бұрын
Please do a video on trimmers!
@Seancutshair
8 ай бұрын
Maybe soon!
@RyanAlca
2 жыл бұрын
Can’t find a gamma/Stylecraft taper blade online anywhere. I want to put a taper blade on my rebels. Will a babyliss taper blade work if I put the regular bracket back on and take off the stretch bracket?
@Seancutshair
2 жыл бұрын
Yes any Wahl/Babyliss blades will work. Check gamma and stylecraft website. And usually Fort Worth barber supply carries them as well
@RyanAlca
2 жыл бұрын
@@Seancutshair you have 40k subscribers but you’re the only one that replies to questions out of the big timers. MUCH RESPECT 🙏🏽
@paulowonashe5067
2 жыл бұрын
Nice vidéo bro From Paris ! We can change the blade on Gamma boosters to ?
@Seancutshair
2 жыл бұрын
Don’t know the gamma boosteds but I’d imagine
@xuanhoang4926
2 жыл бұрын
Where do I buy taper blade for gold magic clipper ?
@Seancutshair
2 жыл бұрын
I always look on Fort Worth barber supply they carry a ton of blades
@mahalo80831
Жыл бұрын
yo sean can I put a babyliss or wahl taper blade on my gamma boosted or Am I better off buying a sc/gamma taper blade?
@Seancutshair
Жыл бұрын
Yes they all fit each other
@mahalo80831
Жыл бұрын
@@Seancutshair Any taper blade you really like at the moment?
@carlcreary875
Жыл бұрын
What tapper blade can b used on babyliss low pro
@Seancutshair
Жыл бұрын
Any Babyliss, Wahl, gamma blade
@IGCuber
4 ай бұрын
Hey man. Great content! Been cutting my own hair for 20 years but did my first bald fade on a friend last week. He liked it.. I had problems with the loprofx battery draining so i returned them. Ive got 2 babyliss fx boost+ coming soon. Going to put a taper blade on one and the other, should I keep the fade blade or will a s|c fapor fit? OR have you tried out the MIM blade yet? Fyi love your channel so much, bought the gold saber trimmer, andis slimline and fx3 foil shaver too! Thank you!
@Seancutshair
4 ай бұрын
MIM blade is amazing definitely go with that!
@Elniniss
Жыл бұрын
I changed the blade on my seniors for a gamma taper blade and my clippers turn off randomly now and won’t turn back on until I connect them to power. Any ideas?
@Seancutshair
Жыл бұрын
Make sure their oiled well and that it’s not on too tight. Sometimes if it’s too tight and can’t move freely enough they might shut off. Never heard of that on a senior but on other stuff. That’s what I’d try
@Elniniss
Жыл бұрын
@@Seancutshair it turned out to be the tomb45 battery. I swapped the oem to the tomb45 when I changed the blade. I changed it back and it worked fine throughout my cut today.
@Seancutshair
Жыл бұрын
@@Elniniss dang. Send an email to support@tomb45.com and they’ll get you a new one
@Texasgirl2023
8 ай бұрын
This video is so informative! I thought all clippers cut the same lol! I thought every clipper was able to fade and taper any type of hair. I had no idea I was supposed to buy different clippers. Thank you so much for making this video! You have helped so many.
@Seancutshair
8 ай бұрын
They are all capable of doing a haircut but some do different things better than others and can help improve your haircutting!
@edenlim5542
Жыл бұрын
hi sean, currently owned a wahL detailer, isit worth getting another wahL magic clipper taper? cheers
@Seancutshair
Жыл бұрын
Detailer is the trimmer right? Magic clip would be a clipper to go with
@edenlim5542
Жыл бұрын
@@Seancutshair hi sean, whats your thots on the stagger tooth blade vs the wahl prolithium taper blade for newbies like me to use at home?
@FJTabb
Жыл бұрын
That fade blade is not for beginners lol!
@Seancutshair
Жыл бұрын
No I agree!!!
@Erniepotts
2 жыл бұрын
should I switch to the Wahl taper blade or switch to the masters blade on my senior? I kinda don't like the Wahl Guard system. Seem like it takes longer. I only cut my son and my hair.
@Seancutshair
2 жыл бұрын
If you like the purple guards do the master set up 👌🏻 I personally like the Wahl system but some don’t
@Erniepotts
2 жыл бұрын
@@Seancutshair thanks
@hammiethebarber4254
2 жыл бұрын
Dope little class bro.def a taper blade fan,but like the fusion blade for sure .
@Seancutshair
2 жыл бұрын
💯💯💯
@chunt241
2 жыл бұрын
How does the wedge blade work
@Seancutshair
2 жыл бұрын
Don’t have one waiting for those lo pros and I’ll see what it’s about
@Giovany03
2 жыл бұрын
Isn’t a wedge blade the same as a regular master blade ( one shown in video ) ?
@Seancutshair
2 жыл бұрын
@@Giovany03 not sure I haven’t seen one in years
@Nauseaing
Жыл бұрын
I use a taper blade on my seniors to set guidelines and debulk and then use my fade blade on my magic clips to blend the guidelines out
@Seancutshair
Жыл бұрын
Nice 👌🏻
@jonathanquezada1263
2 жыл бұрын
What taper blade would fit a Style Craft Rebel??
@Seancutshair
2 жыл бұрын
Any of them should
@vicpr8697
Жыл бұрын
Wow thank you for this, this really helped me out !
@Seancutshair
Жыл бұрын
Good to hear!
@mahalo80831
Жыл бұрын
Yo sean Can I use both as a tandem? Meaning can I put my guidelines with the taper then fade them out with a fade blade or fuzion?
@Seancutshair
Жыл бұрын
Exactly how I do it 👌🏻
@mahalo80831
Жыл бұрын
@@Seancutshair i appreciate the reply back. keep up the good content
@mahalo80831
Жыл бұрын
@@Seancutshair i forgot to ask, what taper blade do you use?
@BEARDED_VATO
2 жыл бұрын
Can the wahl taper fit on babyliss lopros?
@Seancutshair
2 жыл бұрын
Yes I’d imagine it will
@Mike-hy8cs
2 жыл бұрын
The fusion blade is like the andis master blade pretty much
@Seancutshair
2 жыл бұрын
No it’s more like a fade blade
@mikedog5289
2 жыл бұрын
Ok I’ve always wonder about the fusion blade a good reason to buy another clipper with a fusion blade I could sure put it to use a I normally use a fade blade to remove those hard to remove lines especially on dense hair after shaving
@Seancutshair
2 жыл бұрын
👌🏻👌🏻👌🏻
@hallodude7024
9 ай бұрын
Hello, why do i cut with a taper blade better then a faper blade ?
@Seancutshair
9 ай бұрын
Taper blade is more forgiving and cuts a little softer
@hallodude7024
9 ай бұрын
@@Seancutshair Okay thanks
@Zay_5280
6 ай бұрын
Hey bro, I just bought the Babyliss trimmers and it kept tugging me when doing my neck. I Checked on the alignment and I oil them up too and still snags. Not sure if I need a new blade or what. Or just sharpening it?
@Seancutshair
6 ай бұрын
Just needs to be adjusted right. Try it a few times until you get it where it doesn’t snag
@joeskichavez395
2 жыл бұрын
Thanks for the info Sean! I recently replaced the fade blade on my babyliss clipper and since then, it doesn’t cut the same. The cutting blade is just bad. Any suggestions to mod it? Thanks brother 👍🏾
@Seancutshair
2 жыл бұрын
Sometimes resetting it will fix that. Otherwise may need a new cutting blade
@nasmr02
2 жыл бұрын
Should i have a taper blade zero gapped on my seniors and then use my zero gapped magic clips for detailing?
@Seancutshair
2 жыл бұрын
Just preference. I don’t zero gap my clippers just my trimmers
@nasmr02
2 жыл бұрын
@@Seancutshair thanks for the reply man, im new to cutting so i dont know whether to use either a taper or fade blade on one clipper or use the same on both clippers
@SebastianDobroff
10 ай бұрын
Hey Sean if you see this- If taper blade no guard open is 3mm that would make it equivalent to a one guard closed as is labeled on the guards. However if a fade blade no guard open is equivalent to a half(as it should be in the wahl system) then that would mean a fade blade no guard open should be about 1.5mm not 2.5 mm. 1/2 guard=1.5mm. Please let me know if this is correct. If so that would mean that a fade blade open blends into a 1/2 guard and a taper blade open blends into a 1-like the Andis masters.
@Seancutshair
9 ай бұрын
No a half guard plus the blade equals more than 1.5
@TheRealKruzix
Жыл бұрын
Just ordered the snap fx as my first clippers. Looks like I may need a taper blade as well😅
@Seancutshair
Жыл бұрын
Nice! You’ll dig em!
@TheRealKruzix
Жыл бұрын
@@Seancutshair does the Taper blade FX803b fit the snap FX?
@Deebohuncho
Жыл бұрын
@@TheRealKruzix all BaByliss blades are interchangeable.
@Tigerbalm1310
7 ай бұрын
All fx come with a taper blade
@jays9136
2 жыл бұрын
Any performance difference in the taper blade when it comes to different brands? I’ve only ever used gammas since it came with the x ergos
@Seancutshair
2 жыл бұрын
No should pretty much be the same
@TheSoldierBarberLife
2 жыл бұрын
Very informative vid! Do a trimmer one as well
@Seancutshair
2 жыл бұрын
I’ll work on it!
@jonathantorres6522
2 жыл бұрын
Does the ergo taper blade fit the rebel ??
@Seancutshair
2 жыл бұрын
I would say so they should all be the same
@rkw9337
2 жыл бұрын
hey, does the Gamma Fusion blade fit the Pro Fx without any problems?
@Seancutshair
2 жыл бұрын
I don’t know for sure but I’d imagine it would fit
@rkw9337
2 жыл бұрын
@@Seancutshair Ok thank you, and what blade can you recommend for a better shading effect for the Fx Pro 8700?
@BigT1523
2 жыл бұрын
Sean. Can you put a Wahl cutting blade on a babyliss clipper??
@Seancutshair
2 жыл бұрын
Yes you can
@BigT1523
2 жыл бұрын
@@Seancutshair coo. I want to put the white ceramic blade on my lopros. It makes it easy to see what you are cutting 👌
@shaneshane9419
2 жыл бұрын
What clipper do you use/recommend to take the bald line out??
@Seancutshair
2 жыл бұрын
I use my slimline, same thing I put it in with
@nicklozano4911
2 жыл бұрын
Would a gamma or style craft taper blade fit a wahl senior or should I just get the andis on it with the philthy mod?
@Seancutshair
2 жыл бұрын
Yeah it fits. I don’t love the purple guards so I stay away from the andis system.
@miguelcotto311
Жыл бұрын
Is the wahl 100 year anniversary Clipper considered a senior? Was wondering what I can put on my 100 year anniversary Clipper ? I don’t wanna do that andis philthy mod either … plz get back to me I’d appreciate it fellas 👌🏽
@miguelcotto311
Жыл бұрын
@@SeancutshairSean can you reply to my comment bro I’d appreciate it
@kidsuperdynamite
2 жыл бұрын
So you use the taper blade mostly to fade and the fade blade to take out the bald line??
@Seancutshair
2 жыл бұрын
I personally don’t really use fade blades. But that is what they’re each better for. A taper blade doesn’t really take the skin line out, but the open section is longer and makes some of the rest of the fade easier
@kidsuperdynamite
2 жыл бұрын
@@Seancutshair I see what you mean! Thanks!!
@lukecorker1319
2 жыл бұрын
Awesome info man. Do you think a clipper with the fusion blade works alongside a clipper with a taper blade better with or without the stretch bracket on the fusion blade? Have always used a fade blade but I’m planning on throwing a taper blade on my magics and a fusion on my gamma boosted, not sure whether to use stretch bracket or not on the boosted
@Seancutshair
2 жыл бұрын
Fusion with the stretch gives the open closer to a taper blade and closed like a fade
@lukecorker1319
2 жыл бұрын
Not quite as open as a taper though? Can you still work under the taper with fusion with stretch?
@Photoshopuzr
2 жыл бұрын
another good video. what taper blade are you using on the SC not the fusion one? link please.
@Seancutshair
2 жыл бұрын
I have a SC taper blade but now I’m using the fusion on everything
@Photoshopuzr
2 жыл бұрын
@@Seancutshair I just ordered the fusion blade will take a while. I put the andis on its working but want to try the fusion. These blades are sharper for sure. I don't see anyone using the andis blades in the sabers.
@HVACRTECH-83
11 ай бұрын
Your amazon link dont work
@Seancutshair
11 ай бұрын
Not sure which link you mean. This video is old as heck so idk
@HVACRTECH-83
11 ай бұрын
The one that says my Amazon finds or whatever
@denisbasshead7787
2 жыл бұрын
Fuchion blade is something of fade and taper is dope
@Seancutshair
2 жыл бұрын
Honestly it’s mostly a fade blade just has the grooves on it. It’s exactly as thin as a fade blade. I always thought it was in the middle but I’m not so sure
@nurulamin2992
2 жыл бұрын
That's true, it's practically just as thin when you put it side by side.
@LeviCutz
2 жыл бұрын
YO. That is a SICK hoodie. I need the Fusion blade to fit the seniors.
@Seancutshair
2 жыл бұрын
It would fit!
@LeviCutz
2 жыл бұрын
@@Seancutshair WHAT
@adriangarza3446
Жыл бұрын
In prison I cut hair with comb and razor so the regular chamillion fade blade on my babyliss is still like a luxury compared to that. Works pretty good. I may have to try the taper blade though. Great video bro. Which taper blade would you recommend for my babyliss lo pro??!
@Seancutshair
Жыл бұрын
All the taper blades are pretty similar. I use Babyliss on Babyliss, gamma on gamma, etc.
Пікірлер: 277