It's actually insane the difference in balance this product makes, would 100% recommend.
@PeterButton
Жыл бұрын
Thanks for this video. My M3 QR plate arrived this morning without instructions. I found your video and your comments were very helpful. My Sony ZV-E10 is now working on the M3 with a quick QR system that enables me to move it to my Peak Design tripod. I had to use the replacement PD Universal Head Adaptor to get this to work, but it seems to be working well with a SmallRig CH10 compact fluid head. I also ordered the Ulanzi Backstrap Strap Clip. I've used the QR plate that came with that in the 1/4" accessory mount on the M3. It seems to work really well and leaves the M3 hanging down from my rucksack strap at a comfortable angle while I use the tripod. I've not used it outside yet but it seems to be OK!
@jsyntaxmedia
Жыл бұрын
I love the new qr plate! It's a great investment. Glad you like yours as well
@DIY-CIRCUIT
Жыл бұрын
Thanks for the fantastic review & information, very helpful. I have ordered an M3 earlier today & I'm going to now order the F38 too based on your great info. Cheers
@jsyntaxmedia
Жыл бұрын
im loving my setup. I love how small and convenient the m3 is WITH this after-market add-on :) thanks for the comment
@halimrahman
8 ай бұрын
Thanks for this review. I made a stupid purchase, I bought a Falcam F38 and put it on top of the existing mount. Of course M3 could not stabilise the additional height (and the changes of gravity centre point). In 2 mins I'll be buying this F38 for M3!
@themorvy
Жыл бұрын
5:29 These are to fill the gaps. Same Job as the pads from the other guys video. Quick Question, what's its weight compared to the original quick release plate? Is the new plate usable with backpack quick release system? (In case I want to Remove the camera from the gymbal and place it on the backpack strap )
@mauricioramosdelcid7199
8 ай бұрын
you save my day Sir!! Thank you so much for this video!!🙏😊
@LostWithinOfficial
5 ай бұрын
" No instructions were included! The installation was not so intuitive :(" Literally why I'm watching your video 🤣🤣🤣
@xElectricblaze
Жыл бұрын
I got the manfrotto 323 quick release plate and found out that it is too big and heavy for my RS3 Mini gimbal to balance! This one looks way smaller and lighter so I'm going to order this and hope for the best!
@jsyntaxmedia
Жыл бұрын
Very nice!
@localdiscgolf
Жыл бұрын
Thank you for this video!!!
@HVACUncensored
Жыл бұрын
I just got mine yesterday. I love this plate. Did yours come with the mini tripod too? So much better than the plate it comes with. I use my M3 with Sony ZVE-10 and it works amazing. Nice and light I love it.
@jsyntaxmedia
Жыл бұрын
Mini tripod? No, can you share a picture
@halimrahman
8 ай бұрын
On another note, do you know a case that I can use to store/transport Crane M3? I bought the Pro version that came with a bag and I do not need to travel with a lot of bags! I've been looking around for a case where I can store the gimbal so it does not break anything else when put together in a suitcase.
@BrandonLuckain
4 ай бұрын
Hey, you wouldn’t happen to have the stock receiver and plate that you took off still would you?
@kenetoi_21
6 ай бұрын
Can you put the normal arca swiss ung the f38 mount.. i have smallrig cage, does it fit to f38 plate?
@davidd3969
4 ай бұрын
This is compatible on a peak design capture support??? And M3S? Thanks in advance
@DoubleVProjects
5 ай бұрын
I have a zhiyun weebill 2... I was just wondering if this plate is compatible with weebill 2?
@Tarantee
10 ай бұрын
I would actually love to know if the Acra normal adaptor will fit the plate. not the other way around. can i slide my fx30 cage in there?
@Ivanarya14
6 ай бұрын
I've lost My Base Plate for Zhiyun M3S do u think, this one would fit???
@Wenatito
Жыл бұрын
Is it compatible with the Peak Design adapter?
@davidd3969
4 ай бұрын
I have the same question.. did u find an answer?
@7saigon5
Жыл бұрын
Yeah thanks for that information
@jsyntaxmedia
Жыл бұрын
Any time!
@WomanTakenBytheWind
Жыл бұрын
Does this plate work on the crane m3 with the ZV1? Can you use the dummy battery while it’s on the gimbal with this plate? I’d love if you could reply ASAP before prime sale is over please LOL.
@WeAreUX
6 ай бұрын
Does this also work with crane m3s?
@RonaldCid7
Жыл бұрын
LOVE IT VIDEO
@jsyntaxmedia
Жыл бұрын
Thank you!
@MegaSayrax
Жыл бұрын
i can't mount my canon m50 in verticale with m3 anybody have any solution for this problem ?
@K_Naz
Жыл бұрын
Could you test the plate that works with peak design capture too?
@jsyntaxmedia
Жыл бұрын
I don't have access sorry, but I'll ask my friend if I see him
@K_Naz
Жыл бұрын
@@jsyntaxmedia thanks! I just got this and realised the ulanzi plate doesn't work with the peak design capture.
@jsyntaxmedia
Жыл бұрын
@@K_Naz damnm that sucks, what r u going to do
@PeterButton
Жыл бұрын
@@K_Naz See my earlier comment on this video. You could have a look at the Ulanzi Backstrap Strap Clip.
@phucth91
Жыл бұрын
@@K_Naz You have to buy a specific plate from ulanzi that works with both PD and F38 system. Around $10 I think.
@creativetom413
Жыл бұрын
do you recommand it on the weebill 3 ? with the plate that comes with the gimbal, I had the camera falling sometimes
@jsyntaxmedia
Жыл бұрын
yes it's so good
@kleonin
Жыл бұрын
What was the size of the hex wrench you used to remove the old plate form the gimbal?
@jsyntaxmedia
Жыл бұрын
It's included in the kit!
@WayofMJ
Жыл бұрын
Do we know if this works on the m3s? I would assume so but I can’t find anything to confirm.
@holoski
Жыл бұрын
Yes it does. Mine arrived an hour ago and yes, it fits!
@Ribkakeenamateur
Жыл бұрын
Question. After installing this mechanism, does it fit into the box in which the stabilizer was originally supplied?
@ridethewind-ch
Жыл бұрын
Does this also work on the Crane M2S?
@jsyntaxmedia
Жыл бұрын
Good question - can someone else test and verify? If it uses the same base plate as the crane m3, i dont see why not. Maybe try asking Zhiygun or Ulanzi support.
@flomff4037
Жыл бұрын
@@jsyntaxmedia I was looking for this information before buying but couldn't find a user answer so ... just received it today and yes it works on the Crane M2S
@jsyntaxmedia
Жыл бұрын
@@flomff4037 amazing TY!
@krane15
Жыл бұрын
Pronunciation of product names in videos sound like gibberish. Always spell out the names of products you're referring to somewhere in your description. Falcam is in the title (thankfully), but if I didn't already know Arca-Swiss I could have never have understood it.
@jsyntaxmedia
Жыл бұрын
Thank you for feedback! Will update with more detailed description
Пікірлер: 50