Assistindo em 2023 ! Teria como vc fazee um alguns outros tutorial ?
@assad.rajab-2
8 жыл бұрын
thank you man I wanted to learn how but I didn't find just you
@rafaelaugusto5516
2 жыл бұрын
Assistindo em 2021
@assad.rajab-2
8 жыл бұрын
hallo leandro again :) can i ask you somthing ? my question is when i lande and i am on the ground how to active the break because i can't stop untel i go out the landing line and crash can you explan it for me please and can you toll me how i can active the nws from the control panel like from the plan not from the keybord please with great ESAD
@RioFalconBmsBrasil
8 жыл бұрын
+ESAD RECAP Hey, my friend ESAD RECAP, how are you? Let me answer your question. From what you've said to me, you probably know how to land the F-16, but you don't know how to stop it. Well, firstly, you may have read in the manuals that the F-16 has an aerodynamic break which is used by simply keeping your aim point ( the gun cross on the HUD) above 10 degrees; but do not exceed 15 degrees otherwise your F-16 tail will drag on the ground. This is the first step after you touchdown. Now, you're on the ground trying to mantain your F-16 on the center line of the runway and using the aerodynamic break. When your F-16 reaches 100 knots, the aircraft's nose is going to lower slowly on the runway, then you use your breaks which is the "K" letter on the keyboard. REMEMBER: you need to respect the F-16 aproach speed and do not forget to open your speedbreaks by pressing "B" on your keyboard, 5 miles from the runway. If you touchdown too fast, It's going to be hard to stop and could even damage the aircraft. So, Not too slow and not too fast; always consider the weigh of the F-16 and use your throtle to mantain the speed accordingly. To the second question: there is no way to activate the NWS through the control panel. You must use the keyboard to do so, ok? Ask me whenever you want to, ok? See you!!
@assad.rajab-2
8 жыл бұрын
+Leandro Assumpção thank you bro i got it but I couldn't active the nws from the keyboard because its not working by pressing (shift and + and ;) can you toll me why or what I should to do ???
@RioFalconBmsBrasil
8 жыл бұрын
You're doing it the wrong way ^^ . In order to activate the NWS, you hold SHIFT and press ;
@assad.rajab-2
8 жыл бұрын
Leandro Assumpção ahhhhhhhhhhhhhhhhh lolololo i thoud its shift + ; hahahahah its ok thank you bro
@assad.rajab-2
8 жыл бұрын
hi i want to learn how to lock on the enemy plan can you tild me how
@RioFalconBmsBrasil
8 жыл бұрын
+ESAD RECAP Hey Esad, how are you? Let me try to explain how it works. Firstly, you have to detect an aircraft return signal on your left MFD which is your radar (RWS, TWS, VSF) Once you detect an aircraft on your radar - which is like a little yellow box -, you have to confirm with the AWACS if it's a friendly or hostile aircraft. To do so, you have to drag your radar curser - which is the two strips in the center of the radar - place it over the yellow box (the radar return signal) then, you're gonna press Q and then number 2 - DECLARE. This is how you find out whether what you see on your radar is good or not. If it says: falcon 1-1, contact is friendly, You're ok, nothing to worry about. BUT, if you hear: falcon 1-1, contact confirm hostile", then you're in trouble. If what you're seeing on your radar is a hostile aircraft, you're gonna place the radar curser over the yellow box (radar return signal) and press 0 (ZERO) twice. By doing this, you'll be able to see the altitude and speed of the aircraft you are pursuing. After that, wait until your aircraft gets to the missile range and press the pickle buttom. Of course, REMEMBER to select the combat mode: A-A or A-G. A-A: AIR TO AIR: you're gonna use to kill enemy aircrafts, and A-G: AIR TO GROUND: to kill enemy ground forces or assets when assigned to this kind of mission. If you need help, just call me here. Cya!
@assad.rajab-2
8 жыл бұрын
+Leandro Teles HEY HOW ARE YOU THANK YOU FOR EXPLAN IT WAS VERY GOOD I LEARN HOW TO DO IT BUT I HAVE ONE MORE QUESTION WHEN I LANDING THE FRONT WHELL IS NOT MOVING LIKE IF I WANT TO TURN LEFT OR RIGHT TO TAXI IT THEN I LANDING ITS NOT TURNING HOW I CAN FIX IT
@RioFalconBmsBrasil
8 жыл бұрын
To turn your aircraft on the ground you need to turn the nws (nose wheels steering) on. use the set of keys: SHIFT + ; Can you spot those two "towers" on both sides of the HUD? The left one indicates the right glide slope you should be flying during landing. The right one indicates three things: 1- BLUE LIGHT - (fuel) which indicates that your fuel port is open. 2- GREEN LIGHT - the NWS (nose wheels sterring) which is what you're looking for. Turn it on by pressing SHIFT + ; 3- YELLOW LIGHT - it is not implemented on falcon 4.0 allied force. But it indicates that you disengaged from the tanker.
Пікірлер: 13