You can check the gyro 'angle mode' while on the ground. Just wiggle the plane around and watch the surfaces move to correct. They should do the opposite of whatever wiggle you are doing.
@failsafedji1745
Жыл бұрын
exactly what I was thinking too
@wesorama
Жыл бұрын
When you first setup a plane, make sure to manually adjust the control surfaces to neutral while the servos are centered. Some planes (many flying wings) prefer to have a bit of up elevon as 'neutral' position, and there's no yaw axis control. Test the plane (prop off or throttle disabled) at the bench by putting in stab mode and observing the control surfaces while you bank, pitch and yaw the plane around. Lift a wing, and that wing's aileron should move up and the other wing's aileron down to counteract your bank angle to level the plane. Lift the nose up and the y-tail elevons should move down to pitch it back down to level. Move the tail left or right and the y-tail elevons should move toward the direction of movement. Then at least you'll know the stabilization is working correctly.
@spyder000069
Жыл бұрын
Yep. Servos not matching up in angle/stabilize is is pretty common. Always better to find on the ground before launch. Also best to fly manual and trim out the plane not with the transmitter trims but with the adjustable control linkage. Otherwise stabilize mode will always be fighting it. Manual mode is also the best time to test out whether the CG is right. Stabilize will hide a wrong cg until its too late. Trim out the battery placement in manual mode until it either flys straight or drops the nose just a bit while the elevons are level or slightly pitched up. The mini talon / talon is not a slow flyer and I am guessing this model inherits some of that. Keep the speed up. Full throttle launches will also sometimes dive to one side due to torque roll so 3/4 is a good place to start with a mostly flat throw.
@foxfpv
Жыл бұрын
This video should be shown to every FPV starting pilot so he knows what FPV is about. Constant homebacks for a simple repair you didn't predict... But that's why we love FPV, don't we?
@NURKFPV
Жыл бұрын
haha 10000%
@thomasseeley8124
Жыл бұрын
Every time I go out to fly and think "I don't need my repair box" I need my repair box... Lol
@thommylue
Жыл бұрын
Meanwhile it’s getting darker and darker outside
@TommyGFPV
Жыл бұрын
And sometimes it's a process that takes days/weeks because of job/kids/weather leaving you with limited opportunities to fly.
@dallasb7117
Жыл бұрын
No Bro, not everyone Enjoys the build, repair aspect of this wonderful hobby. I know it bothers some people...but I Just want to fly...(and happy to Pay for help keeping things airborne).
@para9111
Жыл бұрын
So much fun watching someone else other than me suffering the joys of FPV foamies.It’s like climbing a mountain oh so satisfying when you get to the top…& it finally flies right.
@stefanpynappels2585
Жыл бұрын
Flying is about fun and challenges for me, fixed wing or multirotor doesn't matter. When you have that perfect late evening flight that leaves you perfectly calm and happy, it makes the umpteen crashes before worth it, and leaves you wanting more, just like you found. Enjoy many more of those flights mate...
@tmc-fpv
Жыл бұрын
Individuals commercializing FPV has driven the entirety of FPV to become highly commercialised. People forget that this is a HOBBY first and foremost. Hobbies allow us to have fun, relax, and escape from the norm. Ive been saying this for years. Its nice to see that influencers are finally getting onboard.
@owen_is_on_the_internet
Жыл бұрын
This is exactly what the iNav learning curve is like. It’s all worth it though! It looks like your plane either thinks right side up is upside down and that down is up. Put the plane into angle mode and move it around with your hand. When you roll right, the left aileron should go up, when you roll left the right aileron should go up. For the tail, aiming the nose up, should make both ruddervators (yes, they are called that ) go down, and aiming the nose down should make both ruddervators go up. If something is behaving behaving backwards, you need to reverse the servos in iNav, not in OpenTX. The fact that it flies OK in manual, but not in any of the automatic modes makes me think that you reverse the servos in OpenTX and not in iNav. When you use iNav, you don’t do any mixing in opentx like a normal plane, just use the same opentx model that you use for quads.
@fpvdroneproductions
Жыл бұрын
My twin brother fly FPV commercially and the other day we went to the park just to rip drones for fun and it was the most fun I've had in years. Getting paid to fly drones is dope but there is nothing like flying for free.
@trumblez
Жыл бұрын
Maybe your flight controller thinks its backwards or sideways in the plane, could also be that the plane corrects it orientation wrong in angle mode, move it in your hand in angle mode and really think about if it corrects in the right direction, had that same problem with angle mode and only saw that it was correcting in the wrong direction like the 10th time i was checking. Also a tip: if the gps shows you the wrong direction home try disabling the compass, its not needed to calculate the orientation anyways!
@fpvhawk
Жыл бұрын
Thanks for the entertainment. Always a pleasure to watch your videos. Also great editing BTW 👏 Get this thing to the mountains 🔥
@Jomanji1
Жыл бұрын
Shouldnt need 100% on the rudder/tail. Also seems like your cg is off. Nose heavy. Sometimes the marks they have for cg arent the best
@AidanMacnamara777
Жыл бұрын
OK, I am so glad you posted this as I have the same plane and it does exactly the same as yours when using any modes but manual! I have still not figured out the problem and mine now needs some serious repairs after the last crash!
@serenestateofbeing1062
4 ай бұрын
7:13 the sound effects killed me 😂
@dronepilot260rc
Жыл бұрын
Oh I love the Nano Talon 🎉 sent a few miles out with no issues
@hoagietime1
Жыл бұрын
Quad guys, find a fixed wing friend, ask questions. We are here to help
@jahnkeanater
Жыл бұрын
Plug into a computer and make sure the board orientation Is correct and calibrate the accelerometer! Also make sure the control surfaces move the correct direction on the ground in angle mode. Rolling the plane right should try to roll left also check pitch and yaw (if it has a rudder).
@NURKFPV
Жыл бұрын
I did both those things!
@tannerchickering
Жыл бұрын
@@NURKFPVwhen you plugin to configurator and roll the plane - does the image roll the correct way relative to the physical plane or opposite?
@USAFmuseum
Жыл бұрын
We always watching your videos and flights! Feel free to return here any time Nurk!!! Let's fly together!
@xaralampos1959
Жыл бұрын
Man. I don’t t know what is going on but as I was watching some fpv videos I started thinking a haven’t seen a video popping as suggested from you and there it is. 👍🏻👍🏻👍🏻. I’m not subscribed in your channel to be honest but I was watching you videos very often. I only thought where is Nurk and never searched or said anything out loud. Damn 🤔 Nice to see a video from you again.
@NURKFPV
Жыл бұрын
I think it's time to subscribe! ;-)
@karterjones9590
Жыл бұрын
Recently went on my own “make fpv fun again” adventure. Really trying to get back to what got me hooked. Got a 5 inch built that I don’t mind smashing and I’m starting a new fixed wing build. Started only buying/building with a purpose instead of for fun! Wondering if you had a similar feeling
@marcplatvoet
11 ай бұрын
Nice to see, it's not that difficult. normally I fry in manual/horizon (it's a plane ;) ) if you look in INAV 6.1 setup you can see the orientation of the plan, and how it responds to the movement. Then if you put in angle or horizon you can see how your elevons and elevator moves. I usually use autolaunch, because I'm lazy. have fun... hope this helps ...
@RizHassan
Жыл бұрын
INAV!!! you need Ardupilot ACRO Mode. I have two Carbon-Z T-28 setup with Ardupilot and works flawless.
@derelictfpv
8 ай бұрын
I prefer carbon fiber over foam!😂😂 But great video man! It was pretty entertaining and I really felt your struggle just watching! 🍺🍺
@funkynerd_com
Жыл бұрын
I have some feedback on what you are "doing wrong". Or, could just do better. First, you can check angle mode without launching it. Put it in angle mode and move the model around and make sure the ailerons move the correct way on their own. Tilt the model left and the left aileron should come up while the right goes down. Tilt it right and the right should come up while the left should go down. Tilt it forward and the elevators should come up, and vice-versa. Very easy pre-flight test that you should do before EVERY launch along with the high-5 check. If you have that sorted then it is actually safe to auto-launch, even for a maiden. Also, turn on continuous auto-trim in iNav to get it trimmed without any effort. I'm sure you've done your research, but just in case you don't know about Painless 360, it is probably the best KZitem channel for newb wing and iNav pilots. Good luck on Maiden 2.0!
@DutchFPV
11 ай бұрын
Nice! I have been flying FPV quads for 6 years and got into planes last year, and I had to learn a lot of new stuff too. Look very carefully at the ailerons at 3:19 (attempt 3) and 6:40 (attempt 10), they seem to be reversed as you move the plane. When you have a plane in angle mode and roll it, the aileron on the high wing should be up, and the aileron on the low wing should be down, to get it back to level. Did you reverse the aileron channel on your radio? If so, that would explain why it works in manual but not in angle. Check the receiver tab and make sure nothing is reversed. If anything needs reversing, do it on the flight controller, in the servo mixer (set aileron weight to -100%), not on the radio. On your radio, you can use the same 4 channels as for a Betaflight quadcopter. As for board alignment, at 2:12, the arrow on your FC is pointing forward, and when you fly it, compass and home arrow appear correct, but please check the Setup tab to be sure. The artificial horizon on OSD would be useful for this. (it will move wrongly if board alignment is not correct) At 4:48, it looks more like reversed ailerons than incorrect board alignment. It starts rolling slowly to the left, and then suddenly accelerates, suggesting it wanted to roll the other way, but it still rolls the wrong way, so it corrects even more (in the wrong direction)
@Vousie
Жыл бұрын
Mostly I just think you need to do slightly more thorough preflights: Put it in angle (or stabilize of some kind) mode and check that it stabilises the right way - when you roll it to the left, the ailerons deflect in a way that would bring the back to level. Looking at that very rapid roll every time you put it in acro mode makes me think either you've got your ailerons reversed/swapped or your flight controller is upside down or something compared to what INAV thinks it is - check that when you're holding it level INAV's roll & pitch readout says 0. I doubt it's the V-tail servos that cause a roll that rapid.
@13FPV
Жыл бұрын
I have a perfect tuned Nano Talon. I fly it almost every week for 3 years! Updated with a new Flightcontroller, same as yours. Do you want my INAV dump?
@karlj.2360
Жыл бұрын
Flite Test is a YT that does RC planes and a large variety of them (they even made a toilet fly). They have also done FPV and drones so whether you contact them directly or seek assistance in the community hopefully some one can help you on your problem.
@shadowofchaos8932
Жыл бұрын
I'm judging your crocs. But feeling better about my plane flying skills, lol.😂
@lightlord299
Жыл бұрын
i think your flight controller is messed better (maybe just the gyroscope)change firmware or try using another Model or from another brand like pixhawk
@jeffhenson1994
Жыл бұрын
love it
@oscarmeyrick3140
Жыл бұрын
Can you put an SD card in the flight controller and collect logs (blackbox)? It would be interesting to see what angles the flight controller saw in flight and what servo outputs it sent.
@Happy_FPV
Жыл бұрын
Can’t wait to see this. My first and only wing was the dart.. boy did it live up to its name on the very first flight 🤣 #lawndart
@billyknippers6983
Жыл бұрын
SAME WITH ME
@wesorama
Жыл бұрын
Was that the 250g one? There's a bunch of vids of seasoned pilots who had trouble with that one lol :)
@chuckgerman7869
Жыл бұрын
Duuuuuuude!!!! I had the same trouble with that zohd airframe. Get a heewing ranger and you will be happy AF.
@NETBotic
Жыл бұрын
I just switched from analog to HD FPV and it's a lot more fun. Nothing like HD crash videos with no extra cameras to get smashed 🤣
@FlyZoneFpv
Жыл бұрын
Nice Paul . I yet have to try fixed wing really interested. 🙌
@NURKFPV
Жыл бұрын
it's so fun
@dronepilot260rc
Жыл бұрын
You should do a build using the Zohd Kopilot next time haha
@OTRFlyer
Жыл бұрын
Hey Nurk!! It’s good to see you finding your joy again! I remember you were the first actual fpv video I ever saw, and man did that open a worm hole for me lol!! That was a few years ago and I’ve been obsessed ever since. Totally changed my life (as corny as that sounds it’s 100). I just re-discovered some of your older stuff recently when I decided to follow JB’s lead and build an 8S quad. Then I realized that this was nothing new as you were building a 12S years ago lol!! Anyway, love your channel man and I really appreciate your putting stuff like this out there so guys like me can find what we didn’t know we so desperately needed!! Love this shit!!!
@LockJawFPV
Жыл бұрын
Holly Molly I found nurk lezzz goooo Vrap on brother...
@horizons_edge_
Жыл бұрын
You can see your ailerons are definitely deflecting the wrong direction while in flight using angle mode. So either your gains are too low and the FC doesn’t have time to react, or your aileron direction is reversed.
@lucidjimiking46
Жыл бұрын
Dude flying wings has been so much fun after getting into quads a couple years ago!! So much fun it's a whole different experience!!
@Xplicit_fpv
Жыл бұрын
This was my first plane.. went threw many headaches/crashes in beginning trin to learn the set up! Now its 1 of my favorite planes.. sooo much different then quads! Much respect for trying something different! Also. Rule #1 for flying fun is always first. Never lose that passion to fly!
@LyroLife
Жыл бұрын
I am also getting back into the FPV hobby.
@badfourlife
Жыл бұрын
Were you ever able yo get it to fly in acro? Such a weird issue, you'd swear it thinks fc is upside down, but im sure you checked that.... I 70/30 split my pitch/rudder mixer on my swordfish vtail (inav)
@NURKFPV
Жыл бұрын
Sorta.. The problem is that we don't have a good explanation as to WHY it's working now
@spartan3299
Жыл бұрын
INAV is so good and easy now, Thanks DEVs! Been flying INAV since 2017. 6.1.1 Rocks! Come on INAV 7.
@NURKFPV
Жыл бұрын
it's so good
@702Wolfi
Жыл бұрын
You can check angle mode without flying on the ground by moving the plane and observing what the control surfaces do.
@NURKFPV
Жыл бұрын
they do the right thing, which is what's crazy!
@specialedgaming574
Жыл бұрын
Do a barrel roll 🤣🤣🤣 I love it
@yulifreed4988
Жыл бұрын
Best comedic editing yet ;) 😂😂
@NURKFPV
Жыл бұрын
Editor thanks you!
@RubyS.1
Жыл бұрын
I see lot of guys messing around with FC on FB. Easier just to put an rx in there and send it. Plane will hold attitude without the fc just set some low rates and have fun.
@NURKFPV
Жыл бұрын
I agree that it's easier, but I wanted some of both!
@RubyS.1
Жыл бұрын
@@NURKFPV it would have made a really boring video if it would have worked first time.
@NURKFPV
Жыл бұрын
@@RubyS.1kind of why I recorded the video in the first place.. I knew it was going to be a disaster lol
@DavidGRCand3d
Жыл бұрын
BTW - there's a "runaway" ZOHD Nano Talon EVO somewhere between St Bernice and Franklin Indiana. :) Has a GoPro Session in the belly. Lost it a couple years ago. I'd lost site, and flipped the RTH switch for the ZOHD Kopilot, but I think it was still thinking my location from a flight earlier in the week was "home", so it headed to Franklin. :)
@AdamFPV
Жыл бұрын
Fk me bro you lost some weight!!! Looking good man!! Sick plane and great vid brother 👊👊👊
@NURKFPV
Жыл бұрын
marathon Oct 27th!
@AdamFPV
Жыл бұрын
@NURKFPV Good man and best of luck dude. I used to be 20 stone for like 10 years, now I'm 13 and holding steady!! I've never felt better. Keep it up dude , you look great man seriously, and Im sure you will feel the benefits too bro 👊👊👊
@woogieman02
Жыл бұрын
I have a sweepwings behemoth that I fly MILES away and it is a blast...BUT...a simple cruising wing is a blast. A simple pack in the truck and go for a flight is way more relaxing than setting up way points and what not
@NURKFPV
Жыл бұрын
I want one of those so bad
@woogieman02
Жыл бұрын
@NURKFPV I have been flying mine and I love it. Talk with Ruben to see if he still has one, if not reach out and let me know ;)
@erlandfpv
11 ай бұрын
Hi nurk, when I'm starting my wing maiden, they didn't work. I'm depressed, and stay away from any thing of fixedwing, about 1 years later... I'm try again with support of my friend, many of them, I'm in now , I'm enjoy playing fpv fixed wing.
@PAYNEFPV
Жыл бұрын
Planes have a learning curve, even after flying quads for years. My first couple launches with my dart 250 mirrored yours, lawn darting into the ground 🤣 Through trial and error and research on the many inav groups and forums, I found out that I needed to add a few degrees of “reflex” to the control surfaces (basically “up” trim but done manually). After that I finally got it up in the air and she flew beautifully. Not sure how the reflex would work with your plane as the dart 250 only has two control surfaces and uses “elevons”. What I would do with your angle mode issue is plug everything in, toggle angle mode and move the plane around in your hand to see what the surfaces are doing before you even attempt to hand launch. If everything is plugged in and set up right, while holding your plane all of your surfaces should be pretty much flat. This will tell you if you have any issues right away. With how yours was wanting to roll right away, if you would have looked at the surfaces before flying, I bet your ailerons weren’t flat at all and trying to compensate already. Inav auto launch is a game changer as well. It can save the gnarliest, nastiest of tosses (given your plane is set up correctly). For long range stuff, cruise and alt hold are fun to toggle on, sit back and relax while you’re surfing the clouds (low clouds 400’ and under haha). Good luck and happy flying 🤙
@TryAgainFPV
Жыл бұрын
seems like the FC is upside down.. it keep attempting to flip when you put on angle mode. Just a thought. Maybe flip the orientation in whatever software youre using.
@RCOverKill
Жыл бұрын
I flew los planes b4 quads, just 1 v tail, they work a bit different than a plane with a rudder, but that was 23 years ago, lol
@Laffinfpv
Жыл бұрын
*sets up camera in garage, leaves garage, opens garage* "I'm actually coming back right this second..." ;) Glad to see you enjoying it again! I'll need to find a project sometime so I can do the same
@tonyhadiputra
Жыл бұрын
That zohd nano talon is my first fpv plane, and its tricky in inav when you setup the elevator, need set to 85 frome 50, so the plane can takeoff more easy, love the plane 😆
@ElyPenner
Жыл бұрын
Welcome to the hobby. Where every thing that can and also everything that can't, will definitely will go wrong. LOL. Great video.
@cold-frontin_penguin7902
Жыл бұрын
Your vids are so damn engaging. Love the editing and keeping my attention.
@garretpickens5745
Жыл бұрын
Unless you already did it I would reflash the inav firmware and recalibrate the accelerometer after flashing. I had something similar to this happening, and just had to completely start over by reflashing it. Also in the mixer tab make sure you look at the plane picture and match the control surfaces to the right port number. Good luck. Once you get it flying smooth and nice long range wing flying is so peaceful and fun to go explore.
@porroco
Жыл бұрын
Yeap everything became flippy floppy with drones and races prob now run with 8s prob the viewer could watch a lap without puking
@NilesGridley
9 ай бұрын
What is your favorite drone for your personal enjoyment? You’re on a vacation and you found a sick spot with some views - what equipment would you want with you?
@andrewna4095
Жыл бұрын
Here's what you did wrong: 1. You installed only 1 out of 4 motors on your quad. 2. Quads don't has wings 3. INAV? Pfff use Betaflight 😂Seriously getting Flashbacks to my short trip into the World of Wings. Broke 2 planes on maiden, half mutilated the 3rd one and got the autopilot do a waypoint mission. Well, that was neat, returned to Drones and never went back to flying wings 😛 They just move weird. If I want to turn left, I want to turn left, not in 100 yard, but right NOW!
@x8n1720
Жыл бұрын
For the isues in angle Mode, read the comments from @jahnkeanater and @wesorama. In addition: 1. Check CG. Seems a little bit noseheavy 2. Throw it harder. More speed means more authority on the controll Surfaces and more lift. 3. You have a V-Tail, means Rudder and Elevator share the Surfaces. You can't set your Elevator to 100% in the Mix because your Rudder need some deflection too. For the launch issues in Manual: To fighting the Torque Roll in full manual setup a Switch on your Radio to enable the Trims on the Ailerons and in addition create on that Switch a second Flight mode "launch" with its own Trim-Settings. Trim the Ailerons to the direction of your Motor spinning direction. After Launch the Switch set the Trims back to neutral. Good Luck
@FPVenius
Жыл бұрын
It's not something simple like the board being mounted upside down (or otherwise configured to be inverted,) right? It seems like the plane keeps wanting to turn over when you turn on angle mode.
@danjensen9425
Жыл бұрын
Dude I just went through that. Started astrophotography spent 10000$ for more and have my prints in art galleries and selling them. So now done with that sold lots of stuff and bought a pair of HDZero goggles 3 vtx 3 runcam Rekon 7” ZHOD extreme oh and 3 speedy bee quad stacks 3 speedy bee wing stacks. And i beat the shit of my s800. Took a break and a flight deck upgrade in the works. Auto launch needs to be mastered , not there yet.
@whidzee
Жыл бұрын
Have you ever tried the Wings Simulator?
@NURKFPV
Жыл бұрын
nope
@sotm6078
Жыл бұрын
Where is your FAA required visual spotter next to you ??
@MissingNumb
6 ай бұрын
This one reminded me of the first vid of yoursthat got me straight hooked on fpv... A little jungle adventure in my home of Oahu, by a budding young pilot named Bulbafett... Most epic fall/gulch dive, and a wing lost to the abyss. Stay awesome bredren!
@porroco
Жыл бұрын
The best FPV wing was the parrot disco, you could use LTE to fly the wing for as long you had a good mah battery
@r3beatty
Жыл бұрын
I love the zohd stuff- i-ve got a dart and a drift. No self-respecting RC guy would fly the ugly foamies, but they are good for us quad folks crossing over. Soooo much fun. Toss a 2s liion into the dart, fly it until i am bored (30min or so) and toss it back in the car. Pull it out the next day and fly again with no recharge. Quads are work- once you get all the electronics going, planes are easy.
@swissfreek
Жыл бұрын
My guess is your radio has a mix in it or your roll is reversed in the radio. Clearly the FC thinks “left roll” isn’t the same as your radio. Make sure the bars in the receiver tab move the same direction as your sticks. If not reverse the necessary channels in the radio. Then don’t touch the radio mix again. If moving the stick right now makes the control surfaces move in the wrong direction, you need to adjust the mix by reversing one or both servos in firmware. Or the FC thinks it is upside down.
@Stygmah
Жыл бұрын
Wings are great man. Try out the ZOHD drift with a 2S 18650 and just a plain PWM RX. It's so light its hard to fuck up and it will fly for like 2 hrs.
@nickbrown7700
Жыл бұрын
Hi. I'm new here. Your intro was fantastic. Short and sweet. Impressive. Now I'll watch more.
@ignasanchezl
Жыл бұрын
Bro you need basic aircraft training lmao. IMO if you cant land it in front of your feet why would you even try anything else xd. 3 mistakes high before testing anything is what all of the old folks would say. Also cant you just look at the surfaces and see how angle mode would react in the ground??? Like checking control surface direction is like so basic lmao. Try FPV with a plane with a lower wing loading.
@BabaYagaFPV
Жыл бұрын
I had the same issue with a matek FC on a heewing T1, instant roll left and crash in angle mode. Tried reflashing, pid gains, and checked board orientation and control surface directions. Ended up crashing too many times trying to get it sorted that the plane was garbage before I ever got there. Best advice I can give you is find a wide open field in the wilderness and climb to at least 500 ft before testing angle mode. I ended up getting another T1 but opted for the VTOL version second time around and that uses a different FC and ardupilot and that flys great in all modes so maybe a FC issue or INAV issue. If you get it working please do a video explaining, I’d love to know what you find!
@4K_Vegas_Drive
11 ай бұрын
Great video brother. I’m just starting to get into FPV and I like your style about it. Very entertaining and great editing.
@WDZaphod
Жыл бұрын
I always Maiden my Planes in Autolaunch, never failed. Stock PIDs will be fine, just FF needs some attention.
@blaqmoses5274
Жыл бұрын
at 4.00 u say that you've changed the authority from 50 to 100. I guess you did that in the mixer tab and that's wrong. if you change that the stabilized modes have no authority to stabilize the plane. load and apply the stock v tail mixer again. I guess that you have enough mechanical throw of the control surfaces cuz u can fly it in manual mode. in order to check the throw in the stab modes u have to arm and apply some throttle. only then the pid loop is active and you can c the max throw.if you just test it on the bench without active pidloop, u get way less throw. max throw in stab modes depends on max roll and pitch rate + ff. simply do a auto tune and you will have the throw you need for the model. you can also tune it manually by adding ff till stab max throw and manual max throw r the same. in the outputs tab you can also increase the rate from 100 to 125 .this will max your mechanical throw of your servos or adjust in on the servo horn /elevon horn. hope I could help. inav is a steep learning curve and you should put a hd system in there. bigger wings r also less wobbly. regards
@Alluvian567
Жыл бұрын
Great video. Getting really fatigued by the marketing blast that the insta 360 is doing. Seeing a blurb about it in pretty much every video I watch. Hopefully you are getting some money for it. As long as the creators are benefiting from it, it is a good thing.
@Fusionman187
Жыл бұрын
I started with a DIY flight controller and a wood framed tri-copter. I've seriously considered reviving it just for laughs.
@JamesDowningFPV
Жыл бұрын
Lol! Loved the editing. Really made this enjoyable. Def looks like you've got something backwards. Did you do the bench testing in horizon mode to get a good feel on the control surface motion when you move the plane out of level? That should provide some clues.
@braindrn
Жыл бұрын
"There is no fun in drone racing" - Some old timer drone racer... probably
@thomasseeley8124
Жыл бұрын
A little tip for ya when hand launching. Hold your radio with right hand and plane with left hand so you can still work elevators and ailerons. Bite the throttle stick and throttle up, then throw it.
@gadgetmerc
Жыл бұрын
I build and fly planes quite a bit. I have\had around 50ish planes. I bought that exact module because how packable it is. I was very excited when i got it but it is the worst plane I've ever owned. I have less than 50% success rate hand launching it and i have a lot of hand launch experience. Glide testing it goes fine but it all falls apart when you start to add power. It very odd.
@TakeItToTheGround
Жыл бұрын
I fly quads. After a while I get pissy as they fly like robots - no flying just point & shoot. Then I fly planes. After a while I get pissy as they meander around like a boat on the ocean - in other words all flying & it isn't point & shoot. Getting pissy is half the fun of the hobby.
@DannyFPV04
11 ай бұрын
Just built my first iNav fixed wing. It’s been very fun using auto launch and loiter modes. It’s been a very fun journey to learn new software and all the settings.
@JPspinFPV
Жыл бұрын
This summer I picked the AtomRC Swordfish and set it up with a head tracking gimbal. It's been a riot.
@permanentlygrounded7770
Жыл бұрын
I have many planes. Fixed wing over quads for me. I enjoy quads too though.
@LockJawFPV
Жыл бұрын
Really impressive self stabilizer on that go360 the way you mounted it shows that very well look how much movement is in the plane compared to the actual camera keep up the rad content brother Vrap on
@nanomiterctech423
Жыл бұрын
You need to do 1)autotrim 2) auto tune , the. Try using any auto stabilizing modes . And you have to do those in manual mode . And to check the angle mode you can put it in angle mode on ground the. Just wiggle it around and see where the control sirfaces are moving .
@CitraFPV
Жыл бұрын
Wing spar in upside down... Looks like you have negative dihedral angle. That will flip it every time...
@twinturbostang
Жыл бұрын
Sure looks like something is reversed in angle mode. While holding the plane, activate angle mode and then roll the wings left or right and make sure the ailerons deflect in the correct direction to counteract the roll. Either that or you have the gains way too high.
@NURKFPV
Жыл бұрын
everything deflects correctly when it's in angle mode and in hand!
@twinturbostang
Жыл бұрын
@@NURKFPV Puzzling. But then, INAV behavior is quite confusing sometimes.
@ScottBalkum
Жыл бұрын
Oh man, I have felt your pain but man oh man, have I not laughed that hard in a while. Thank you for sharing!!!!!!
@Lucas_Middleton
Жыл бұрын
lol its so funny you made this video because this is litterley the exact same thing that i just did recently, like you said i as well kinda lost the joy of fpv quads and wanted to experiment i ended up getting a zohd baby ar wing pro put inav in it and had a blast its completely destroyed at this point though :( but i turned towards flite test and bought doller tree foam board and built up an ft spear i wonder if you will end up doing the same lol anyway nice vid.
@smp1990
Жыл бұрын
just make sure you dont have any mixes on your tx for the control surfaces. All that kind of mixing should be done on the FC.
@Gospikeit
5 ай бұрын
This is the most I've smiled in a long time. The struggles of the build! I'm going to dust off the workbench tonight.
@spencerriley521
Жыл бұрын
No DJI video? I would use a RDQ Mach 3 VTX and run video camera off of it for clean video..
@nilsmensch
Жыл бұрын
i have absolutly no idea, what u are doing wrong and i can relate to it sooo good. im still new at fpv (6months or so) and there is always a new problem, that i have to fix :D but i love it
@bradyboy123
Жыл бұрын
Hey mate are you running inav or ardupilot or something else? I’ve built one of these and many other wings and planes if you want me to go through your settings with you
Пікірлер: 267