This was fantastic and completely thorough in every aspect from start to finish. An excellent training and refresher resource.
@MisterItchy
2 жыл бұрын
This worked wonderfully. Thank you. I had changed the batteries 3 years ago but we haven't used this since and my boss wanted to get it up and running again.
@maxprocnc2515
3 жыл бұрын
Awesome video, very well explained. Thank you so much for great contribution, just mastered and calibrated our Arcmate
@7continentsrobotics632
2 жыл бұрын
Great Video. You saved me from hours of trial and error. Thank you!
@MrGwatts
3 жыл бұрын
Best video I've seen on the subject. Thanks...
@sennitt101
3 жыл бұрын
Great video, very helpful , thank you.
@iutarogirotto5110
Жыл бұрын
hello, I replaced my J5 on an AR mate 100ic and it moved perfectly, then I quickmastered like on this video and now it won't move, it detects collision as soon as I try to move it, what can I do?
@wuslifejouney4709
3 жыл бұрын
what is the steps that you still have the power when you change out the batteries, how would the process be different
@AmtekCompany
3 жыл бұрын
As long as your batteries aren't dead, you won't need to remaster. Just replace the batteries and skip the remastering part of the video.
@Anthony-yp5rg
2 жыл бұрын
I followed this and successfully mastered and recalibrated the robot, but I’m not not able to use the programs within the robot due to MOTN 023: In Singularity. Could you help?
@MisterItchy
2 жыл бұрын
I have had 'in singularity' errors before and I think they are caused when trying to move the robot into a position that was impossible. I think I solved this by jogging the axes back to near the home position.
@emanemanresuresu
2 жыл бұрын
You should think about if using a robot is the right thing for you, if you dont know what that means. Just google Robot and singularity. Its common across all of them.
@AndrewBambiliano
8 ай бұрын
I am just curious why you remastered the robot with BLAL , not BZAL
@trayshonmartin6718
3 жыл бұрын
Can this robot spot weld batteries together
@IanHolland-yz8be
Жыл бұрын
I get to reboot but can't jog any axis as error message states the robot is not calibrated, any help would be great
@alexdashwood4976
9 ай бұрын
Are you in "joint" coordinate system?
@RussellTHouse
2 жыл бұрын
After mastering and calibrating my robot (LR Mate 200iC w/R-30i Mate controller), the System Variable under $DMR_GRP[1] called "$REF_DONE" is FALSE ($MASTER_DONE is TRUE). Does $REF_DONE need to be set to TRUE?
@emanemanresuresu
2 жыл бұрын
I guess that means you didnt set a quickmaster reference Position. Which you should do after mastering, to be able to perform a quickmastering (for example, create a point with all axes at 0 degree. Drive the robot there. Apply quick master reference position in master menu. Now you can always quickmaster your robot by driving to zero position markings, if the mastering has been lost while there were no hardware changes (only changed cables, or disconnected them. only had empty batteries). Quickmaster is the way to go, when there were no hardware changes. Should be actually done in the videos case. A real mastering was unneccessary and ruins accuracy)
@iutarogirotto5110
Жыл бұрын
@@emanemanresuresu hello, I replaces my J5 on an AR mate 100ic and it moved perfectly, then I quikmastered like on this video and now it won't move, it detects collision as soon as I try to move it, what can I do?
@emanemanresuresu
Жыл бұрын
@@iutarogirotto5110 Im really sorry, im afraid i cant help you much. I havent worked with fanuc robots for a while now. Does it really detect a colision or does it stop because a software endpoint switch?
@iutarogirotto5110
Жыл бұрын
@@emanemanresuresu thanks for the reply, a small wire of the servo motor brake got severed during installation, we fixed it and the problem went away, I am now trying to do a TCP calibration but can't find any material online to help me perform this procedure
@SalaMaker-ix9oe
4 ай бұрын
amigo, na primeira parte que tento da um reset nos alarmes, não consigo, não funciona, pode me ajudar ?
@fabriziofischetti7222
Жыл бұрын
I think you need a basic basic course in Fanuc… we wait for you in our Academy. ;)
@gurumoorthyc4590
3 жыл бұрын
Thanks bro...😍
@신선우-t5r
3 жыл бұрын
what is the battery model number?
@richvandyke1805
3 жыл бұрын
They are just standard "C" batteries.
@williamhuang5329
2 жыл бұрын
Hanzhen harmonic gear ,robot gear reducer, over 30 years experience
@ravirajan1352
2 жыл бұрын
Why ur copying master count to refcount ......without juz simply doing mastering with robot zero position is enough
@blessdstry
Жыл бұрын
I was thinking the same thing.
@chungkhoancungtrongan6693
Жыл бұрын
Because the visual adjustment of zero mastering is not accuracy. It just uses in the case of replacing mechanical parts
@paydoncarmon5480
Жыл бұрын
It's enough 90% of the time if your robot guy gives a shit. @@chungkhoancungtrongan6693
Пікірлер: 32