Thanks a close look at Cultivision, farmall forever,
@johnrosier1686
Жыл бұрын
My grandfather had an early 40s Farmall A that he bought when he got out of the Army during WW2. Farmalls are my favorite because of this. They aren’t the biggest machines but they do come in handy for all kinds of different jobs around the farm. It’s great to see this one in its work clothes still working. 👍
@rustyrelicsranch
Жыл бұрын
Thanks for sharing. Similar here. Both grandfather and dad were big Farmall guys
@MarkWYoung-ky4uc
Жыл бұрын
I love this. This is one of the few As I've seen that still has the lift arms and rock shafts on it as well as the cultivators. This area where I live (the northern Piedmont of North Carolina) used to be covered in small tobacco farms and the off set Farmalls were a dream come true for many local farmers. I still have Daddy's 1963 140 that he and I raised tobacco with years ago and I garden with it now.
@rustyrelicsranch
Жыл бұрын
Thanks! I've never seen tobacco growing, but that 140 is a keeper.
@MarkWYoung-ky4uc
Жыл бұрын
@@rustyrelicsranch This used to be tobacco country around here.
@davidscibek8822
Жыл бұрын
you always make it look so easy!!
@rustyrelicsranch
Жыл бұрын
I knew it! I was waiting for it...
@mcinnisconstructs2788
Жыл бұрын
You got it running great and doing exactly what it is designed for! Great job. Love it. I've got one that I'm working on getting running. Maybe soon I can enjoy mine. Thanks for sharing
@rustyrelicsranch
Жыл бұрын
Thanks! Best of luck with yours.
@OldRedTractors
Жыл бұрын
A very nice job. Really nice and clean.
@rustyrelicsranch
Жыл бұрын
Thank you!
@bobbyscott8024
Жыл бұрын
Very nice! I had a chance to buy one of these just like yours back in 2005 but wound up finding a 100 with several pieces of 1 pt. equip. with it and still have it! No better ''garden tractor'' imo. Great job on the cultivating and the corn looks amazing! From Sophia, N.C.
@rustyrelicsranch
Жыл бұрын
Thanks! Great find on the 100 with equipment. I'd like to find a cub with 1 point.
@fallenskyshomesteadingandp2528
3 ай бұрын
I've got the same tractor, but i need the rear cultivator for the back, and I'm still shopping for them. Great job, sir.
@rustyrelicsranch
3 ай бұрын
Thanks 👍
@rustyrelicsranch
Ай бұрын
I just noticed that Roy's Red Iron in Tennessee has a full A-136 cultivator set for sale for $175.
@richardschaffling9882
7 ай бұрын
Looks and sounds good and you moved right along so many people cultivate real slow.
@rustyrelicsranch
7 ай бұрын
Thanks! I like to throw as much dirt to the crop as I can without covering it.
@michaelwray4359
7 ай бұрын
Super excited to see this I have two I’m totally redoing thank you so much for sharing this amazing video I’m going to be doing the same thing with them
@rustyrelicsranch
7 ай бұрын
Thanks! I have since removed the cultivator shanks and attached an under belly row disk for the garden that I'll do a video on.
@paulbrooks2024
Жыл бұрын
Noticed a little play in the steering, our old super A had a turn and a.1/ 4 plowed some corn up with it .
@Jtwes
Жыл бұрын
You had it dialed in perfectly
@rustyrelicsranch
Жыл бұрын
Thanks! After 3 seasons, it only needs minor tweaks.
@jonbellman4385
Жыл бұрын
Another awesome video! I agree with our partner in crime, "you make it look easy!" I'm still hoping for that unedited blooper video someday soon 🤣.
@rustyrelicsranch
Жыл бұрын
Thanks, Jon. Maaaybe...
@LarrySwindall-un1cx
10 ай бұрын
I’d really like to know the connection/hookup arrangement for the cultivators. I have an A but the rear cultivators were being held up by a chain and were not functional. The front were connected to an exhaust assisted lift system which didn’t work either. My intention is to discard the exhaust system and go back to the manual lift. My problem is I don’t know how to set it up. I would appreciate any help you can afford. thank you, I enjoyed your video.
@rustyrelicsranch
10 ай бұрын
Hi Larry. The lower rear gangs are connected to the final drive/bull gear housings and are connected to an upper rockshaft by vertical rods with springs on them. The rockshaft works via a linkage rod that goes from the rockshaft, under the seat near the right fender, and connects to a manual lift handle that is bolted to the right front of the platform surface. Regarding the fronts, I've seen exhaust lifts, but I'm not familiar with them. On mine, the front levers also work a rockshaft that connects to the lower beams via rods with springs. It would probably be best if I could send you pictures.
@billtodd6509
2 ай бұрын
What do you think of the Allis Chalmers Model G? I just bid on a restored one and figure it would be great for my big garden.
@rustyrelicsranch
Ай бұрын
I don't have any experience with the G, but it looks like it would be an excellent cultivating tractor with all that visibility to the front. I've only seen them with culitvators mounted, but I assume there are other implements for it as well.
@TeresaJohnson-ew4us
Жыл бұрын
Are the front and rear lift seperate ??
@rustyrelicsranch
Жыл бұрын
Yes they are. And the right and left side of the front can be raised & lowered independently if needed.
@TeresaJohnson-ew4us
Жыл бұрын
@rustyrelicsranch how can each side if front be raised independently ?? Can you show me that ??
@rustyrelicsranch
Ай бұрын
I totally missed your question. I should clarify. There are two levers on the left side of the tractor, one longer than the other. The long handle lowers and raises both gangs and has a lot of "teeth" or notches to choose from. The shorter handle only has about 4 selection notches and you can use that to run the left gang slightly higher or slightly lower than the right gang.
@rustyrelicsranch
Ай бұрын
I totally missed your question. I should clarify. There are two levers on the left side of the tractor, one longer than the other. The long handle lowers and raises both gangs and has a lot of "teeth" or notches to choose from. The shorter handle only has about 4 selection notches and you can use that to run the left gang slightly higher or slightly lower than the right gang.
@TeresaJohnson-ew4us
Ай бұрын
@rustyrelicsranch why would you want left gang slightly lower it higher then right gang ???? I don't understand what you would gain by this ??
Пікірлер: 37