The side plank double leg lift with jack handle will become the new workout craze at all the Boot Camps. It's looking great - the front wheel weights really set it off!
@terrymumford7659
Жыл бұрын
I love your description of the leg action while the camera was as steady as a rock. I can only imagine Rick Bork's subtle comments on that display of strength and coordination.
@paulsando3107
Жыл бұрын
Somewhere in California, they are charging a membership fee to do that........
@danielstickney2400
Жыл бұрын
That must be one hell of an ab workout.
@coopershistorygarage2804
Жыл бұрын
When you need a 3rd arm to run the jack because the other two are guiding in the belly pump …. 😂 Been there too with the old M we have.
@rogerallen6644
Жыл бұрын
Been there done that, lol!!
@dedrakuhn6103
2 ай бұрын
This is an excellent example of how to professionally restore a farmall tractor
@jonunya3128
Ай бұрын
that red is an excellent color. really enjoy how it looks. awesome skill Mr. Squatch
@HillbillySailor
Жыл бұрын
This has to take a load off your mind. Ol' girl is as bright as a new penny! Great work on the rebuild!
@rogerrabbit8297
Жыл бұрын
You are a very maticulous man,I love your way of thinking and the tractor
@KennyKizzleRustyNutzRanch
Жыл бұрын
Looking great, buddy! Lots of progress made today! One "veteran tip" I have for everyone - if you can make it work, it is a lot easier to install the oil gauge line while the oil filter housing is off. Makes putting a wrench on it for tightening much easier! NICE work, bud. I can't wait to see it at Nowthen! Also - for things like axles and the front pedestal assembly - I like to use a roll of saran wrap to protect things. The nice part is it doesn't stick to the metal, and if you leave a little piece in somewhere, it is clear and won't be seen.
@jmumbauer
Жыл бұрын
Sure looks nice! Who doesn't love final assembly of freshly painted parts?!
@bruceblaylock1397
Жыл бұрын
Awesome looking Farmall, after watching many different restoration videos I consider yours one of the gold standards. I love watching it all go back together! Thanks
@mikestewart7338
Жыл бұрын
You make everything look so easy. And that just ticks me off. 😄
@charlesward8196
Жыл бұрын
That hydraulic pump went on so smoothly, it must be a real monster without those special tools. I must admit I was a little nervous as you lowered the bolster on to the steering post/shaft with your hand on the shaft. A real potential crush injury if there is a hiccup in lowering the bolster.
@jasonhoose5215
Жыл бұрын
I don't know about yall....but I'm for sure goin to sleep better tonight knowing those "right and proper " bolts are installed under that beautiful ole girl😅. Great job squatch please keep up the OCD and fantastic work. Best wishes to you and yours sir
@rogercarrico4975
Жыл бұрын
Being able to slide the input shaft into the clutch after the tractor is together. Is a huge help, I would think! Nice!
@bcbloc02
Жыл бұрын
My favorite part about your intro and outro spot is the d2 spackle on the door. 🙂
@RobertBrothersJr-dc7nr
Жыл бұрын
The old girl is looking great. I love your attention to detail and getting everything original even down to the bolts. Fantastic work !!!
@edspencer7121
Жыл бұрын
I haven't missed a single episode of this build or any others you've done. Looking forward to Nowthen.❤
@dennishutchinson
Жыл бұрын
Ole girl is looking great! Wish my Super MTA was this far along. 👍
@geneguenther4325
Жыл бұрын
Man Toby Preparation H is looking amazing! All your hard work is really paying off that’s for sure. Great to see it in a rolling chassis again! I know you wish it could be ready for Nowthen but I forgot about the hood, tank and grill needing to be painted yet besides running the engine and proving everything out. Take your time and do it right. Can’t wait for the next video! Thanks again!
@Denis-tu1pd
Жыл бұрын
That old girl is looking happy .when you put the pride and hart in to a project as you do it comes out awesome. And the pride and hart you put into this and all of your projects shows in your finished product. Denis from Santa Rosa CA.
@texasjetman
Жыл бұрын
Can’t beat experience and knowledge thanks for sharing tips we all learn something from each post you do. Coming together well.
@bobpaterson1845
Жыл бұрын
The quality of the paint used in the respray is amazing all those bolt's/nuts tightened up and hardly a mark on the paint ,,,WOW 👌
@Barnzoid
Жыл бұрын
She sure is lookin' pretty! Excellent job
@1howtoplace
Жыл бұрын
Make a bracket to hold the pump shaft inside the compartment so it will never get lost even if you pass.
@jonear12
Жыл бұрын
Even without it being completely back together, you can get a sense of what the final product will look. With the front wheel weights, the rear wheel width, and the dish of the rear wheels, I’d say you nailed it. Sharp tractor!
@edkeniston4786
Жыл бұрын
That bolt is your signature! 60 years from now when someone tears that tractor down, they’ll see the paint and realize this is a “Squatch” tractor!
@ethanmorton7122
Жыл бұрын
Teach me your ways, oh paint master!
@hoophil
Жыл бұрын
I'm so jealous..... what a beautiful tractor. Thank you for sharing your build with us.
@jamesgeddes797
Жыл бұрын
What a beautiful project! I am nothing but impressed with your attention to detail. Thank your sharing with us.
@cometcountry1974
Жыл бұрын
Wow that looks amazing and I’m sure the camera doesn’t come close to doing it justice!! It’s coming along nicely!
@DohosanV
Жыл бұрын
Yeah I agree this video it looked alot more orange than usual.
@geraldharkness8830
Жыл бұрын
so saisfying seeing the tractor standing on its front pedastall looking good!
@richardphelan8414
Жыл бұрын
Awesome Building day Toby ,looking forward to the start up and the first field dusting
@johna7661
Жыл бұрын
It’s amazing, it looks like a tractor! I like the explanation of planning and preparation so bad things don’t happen during assembly. Thanks!
@stevebarnhart2090
Жыл бұрын
I never saw a new H and I would bet the paint wasn't that good. Beautiful tractor.
@rickbrandt9559
Жыл бұрын
These videos/explanation steps are a great guide for the 1st time DIY home guy fixer upper !! even a good reference for us know it all's...
@rickyjessome4359
Жыл бұрын
Another fantastic video Squatch! Man oh man the H sure is looking good. Looking forward to the next video. Cheers
@ramosel
Жыл бұрын
Oh, that was a rookie, two foot, jack operation... ;-) Ya gotta learn the knee above, ankle around, foot below, one legged jack pump, other foot on the alternator drive while you put in the sine plates for toe/camber on a differential tube trick.... ah, memories of GT-1/Trans Am days.
@lukestrasser
Жыл бұрын
You’ll have this ready for fall plow day yet! Then it’ll be ready to go back in the shed for winter! Great work.
@bernhardfahrni2336
Жыл бұрын
I would be the happiest person if I only had the same amount of skill you have under one fingernail! Great project, great outcome! It is a real pleasure watching your shows!
@andrewmurton8379
Жыл бұрын
The H looks superb, you must be really pleased, a lot of hard work but so so worth it.
@monkeybarmonkeyman
Жыл бұрын
Liking that front wheel assembly with weights... looks good. Can hardly wait for the first start! 🙂
@dans_Learning_Curve
Жыл бұрын
I'm seeing a whole lot of *RED*! Nice work!
@earlwest7351
Жыл бұрын
Do you know how much paint it took to cover Preparation "H"? It would be interesting to compare the coverage comparing an automobile than has a smoother surface than "H" and not as many nooks and crannies. An idle thought I know, but intriguing.
@darweb3417
Жыл бұрын
Looking Good!
@pcmwyman
Жыл бұрын
Looks great. You always do such nice and detailed work. I can’t wait to see it in Nowthen. But I’ll have to park mine down a couple spaces, so I don’t get my old dirty H to get any dirt on that machine.
@tomwilliams8675
Жыл бұрын
In my mind, where would I put that short hydraulic drive shaft so my future self would remember where I put it. I think I would have found a way to tie wire it to the cover wrapped in cosmoline again and bolted back under 😁
@DavidCAllen50
Жыл бұрын
Toby another amazing video, thank you for taking us along!
@Ihbinder14
Жыл бұрын
Looks really good! Piece by piece it will get there. Thanks for sharing your tips and tricks.
@Thomasgarrick113
Жыл бұрын
looking good don"t forget to block off 2 ports on left side of hydraulic pump if you didn"t already
@robertamerrick2000
Жыл бұрын
My friend and I are in the process of installing motors in our trucks. Mine: 1977 Ford F-150 4WD, and my friends truck: 1955 Willys truck.
@johnmcbath256
Жыл бұрын
My dad bought a new H in 1948,I still have it, it has a oil level dip stick in the filler neck of the lift all pump
@ralfie8801
Жыл бұрын
Thanks for the explanation on the primer the other day, I did see the episode on all of the paints you use and why, I had just forgotten that part. As for the finish coat sticking to the primer without sanding it, I was convinced it was all good when you pulled the tape off of the bolster shaft and the paint stayed put. I did see one thing that made my eye twitch though, and that was how the tape was applied to that shaft. Maybe you have a reason for doing it the way you did, maybe not. But when I used to paint cars and pickups about a hundred years ago, I found that wrapping the tape candy cane fashion around a cylindrical object such as a radio antenna could make the tape much harder to remove and wasted tape unnecessarily. I was instructed by the shop owner to run the tape longitudinally on the cylindrical object to reduce masking time and amount of tape used, plus it was a lot easier and faster to remove after paint was finished. I realize in this case you were protecting the paint from scratches, but amount of tape used and ease of tape removal when the job is finished still applies, just a thought and reasoning on how others do things a bit different for you to consider. This was another good video, and I can hardly wait for the day it pops off and drives out of the shop on its own.
@clydeschwartz
Жыл бұрын
Excellent video did you omit the brake cable guide thing for a cultivator that goes on the bolster shaft or is that a 2 piece clamp on thing. Most Farmall H s had that guide thing in my area here in western Minnesota I believe it is a carry over part from a Regular or F20 Farmall tractor. Keep up the great videos
@duron700r
Жыл бұрын
Odd question perhaps. What is your favorite oil filter for your Farmalls? Thanks Squatch. Du. The prettiest H in the Northern Hemisphere!
@jim5870
Жыл бұрын
Better put some Cosmoline on that Hydro pump driveshaft before it gets stored!
@ImpHalla66
Жыл бұрын
Amazing leg work with the floor jack!! 👍
@fritzhawes1784
Жыл бұрын
You do excellent work my friend,we all wish we were as skilled as you!
@digitalrailroader
Жыл бұрын
I love how the hydraulic pump lift tool already has a coat of Farmall Red to identify it as a Farmall tool!
@waltermattson1730
Жыл бұрын
The H will be outstanding when you are done. Your editing skills are top notch too.
@domthomas1002
Жыл бұрын
She is going to look awesome. Great job, Sir.
@arthurirwin8235
Жыл бұрын
Turning into a beautiful tractor, great build!
@paulpowell9579
Жыл бұрын
Looks great Toby.
@Titan604
Жыл бұрын
That's the reddest red that has ever been called red!
@aserta
Жыл бұрын
1:11 i saw a couple of busted cases in that area online, people asking for advice on brazing it all back together. Now it makes sense. That's indeed a thin spot.
@cdachyk
Жыл бұрын
Looks awesome! Nice progress.
@ericcorse
Жыл бұрын
She is looking mity good. This has probably been asked before but do you think it makes any difference as to using 6 or 12 point tools as far as marring the paint. those front wheel weights look sharp too.
@ericcorse
Жыл бұрын
@@squatch253 Thanks
@ericsargent4551
Жыл бұрын
Great work. Hope you can get the H to the 20:08 show it looks awesome!!! Thanks for sharing…
@CapnJackSB
Жыл бұрын
Fascinating as always, but my eyes need a break after all of that red paint. I waiting to see if you're going to continue with the, "M & M " project. 😀
@christophermitchell8986
Жыл бұрын
1:48 I wasn't going to tell you until it was assembled. 😂
@jmailbell
Жыл бұрын
There’s no better therapy than to have a productive day and have everything go back together and not fight you.
@theskepticalnegativist1004
Жыл бұрын
Im working on a volvo 245 -91. It's fighting me every step. Mostly due to hack mechanics before me. Reassembled with the old bolts with rounded heads etc.
@jbj27406
Жыл бұрын
09:05: This is the moment when you're glad you always spring for the good masking tape.
@williamhastings7182
Жыл бұрын
She's a beaut Clark!
@InquisitiveSearcher
Жыл бұрын
LOOKING GOOD!!! But.... let me think a moment... lets see... we've been into the transmission, rear axial and bearings, brakes, tear down and rebuild of the bolster, new front wheels, oil pump torn down and rebuilt, engine taken down to a short block.... Wait.... Wait... Wait!!! Wasn't this supposed to be a "cosmetic restoration"??? 🤔🤪😂
@Dagrond
Жыл бұрын
I'm a little surprised to not see you have made a custom mount to zip-tie the unused hydroplic coupler inside the cover plate. So that you would know where it was when you wanted to actually couple the transmission to the hydrolic pump. Otherwise - you could misplace it ...
@michaelbaumgardner2530
Жыл бұрын
Turning the back wheels and the front wheel weights set the H off...looking good.
@ronzezulka6646
Жыл бұрын
Looking good Squatch. Begging for tin.
@noelstractors-firewood57
Жыл бұрын
Looking great. Some nice looking paint.
@nathancarlisle2801
Жыл бұрын
Question. if you’re not going to run hydraulics on the machine, why install the hydraulic pump at all? Would it not make more sense to just block that cavity off completely. Sorry if it’s a stupid question.
@matty2helpfull
Жыл бұрын
The old H looks great and it has to be a releaf to have the whole chassis back together and it sitting on its wheels again
@danielgriffith7694
Жыл бұрын
Excellent work as always. I have an observation? Was/ should there have been a dust boot around the oil fill pipe for the hydraulic pump? I can see dust/dirt- creatures getting in there.
@molinedan
Жыл бұрын
Looking great!
@jackel440
Жыл бұрын
Another job well done. She is looking good
@jameswitkowski6736
Жыл бұрын
It still looks good inside the bell housing , painted bolt !!!
@Name-ot3xw
Жыл бұрын
Fun Fact, the original engine cowlings for those are almost extinct because they were the first thing broken/dented/abandoned to try and eek out cooling.
@frritter8253
Жыл бұрын
Such perfection Toby, factory new didn't come close to this. It looks far too good to get dirty!
@Name-ot3xw
Жыл бұрын
Looking good, I can almost see the empty spot where you'll stuff the next project into.
@edwardpolinder6434
Жыл бұрын
Looks great you pay attention to details
@stepheard1590
Жыл бұрын
great leg work on the floor jack ...like a Ninja!
@tomworld2494
Жыл бұрын
Top, einen Gruß aus Deutschland, sehr Gut, wie das Projekt vollendet wird 🙂
@slypig24
Жыл бұрын
Looks great now its on wheels again. Is the small gap between the hydraulic pump filler tube and the casting of any concern for dirt/water entery?
@robh.8214
Жыл бұрын
Double leg jack operation with a full twist and 1/2 gainer…. 10/10 10/10 10/10 10/10 3/10….. Last vote was from the Russian judge….
@markhgillett
Жыл бұрын
Hey Toby. What young man wouldn’t be thrilled to see this under the Christmas tree
@rolandmohler2695
Жыл бұрын
That's the prettiest H I have ever seen
@gerrywinzor1103
Жыл бұрын
Garage Pilates at 14:50 🤣
@juangarza7732
Жыл бұрын
Very cool 😎
@charlescastle5566
Жыл бұрын
It's looking good Toby
@arthurlake3710
9 ай бұрын
Nice work!!
@jamesboris1233
Жыл бұрын
It's look great nice job
@paulshuler9570
Жыл бұрын
Please slow down. When your done I am going to really miss this.
@michaelscriffiano9267
Жыл бұрын
As always.....nice job
@tacticalrabbit308
Жыл бұрын
Looking good , nice to see it coming together more tape pulled off , clean floor space to Walk around in , once you have this one don't what are you going to work on next?
@ram50v8
Жыл бұрын
@squatch253... Toby, Rick Bork told me to ask about the grain drill......
@parochial2356
Жыл бұрын
Curious: No lubricant on the clutch shaft splines? Back in the day, Nissan specified a thin coating of molybdenum [moly] grease on the shaft splines. Yes, 1990s Japanese car technology compared to 1950s American iron. Also, did Ford specify any lube on clutch shafts when you were a dealer tech?
Пікірлер: 185