Thank you. I just showed my husband and said "i wish we had some of these."....he says" i do" lol❤
@rc9657
Жыл бұрын
Awesome. I tried this technique earlier but with only one air shim before I discovered your video and I could not get the damned thing off. Thought about just breaking the plate or throwing my washer off of my deck. Will try again with more shims! Hope restored.
@jralcantar7074
Жыл бұрын
I try it today and it work thank you and God bless you
@marcellaadams8089
10 ай бұрын
After I took the top cap off that above the 7/16 there is small gaps that hold that cap in place I got a hair pin bobby pin pushed it through one gap with a shoestring went across the way through another gap with bobby pin had the shoe string doubled ever so slightly and gentle pulled up worked good
@yogibearyogibear7229
9 ай бұрын
Dude yanked like hell on mine and got nothin
@bryantclark7488
5 ай бұрын
Wat are the air things called
@jralcantar7074
Жыл бұрын
Thank you I try it today and it work
@Neopopulist
Жыл бұрын
I wish I would have found this video before I watched the one about smashing it with a hammer LOL. Oh well it worked, but now I have to order another plate. Not too bad considering It took me about 10+ hours and dozens and dozens of tries to get the original bolt out. Thank god I finally found some stripped bolt nuts at lowes.
@user-fm4ro1om6e
Жыл бұрын
Another good one Is a dog leash , which you wrap around the thin dark gap at a 180 degree pull hard
@abel1955
10 ай бұрын
This is actually a really good way, I’ve tried and worked 100% I pushed it in with a flat screwdriver
@yogibearyogibear7229
9 ай бұрын
Man mine must be straight up welded. I destroyed my washplate and still couldn't get it off
@skliros9235
8 ай бұрын
Two mini pry bars and some cussing, got it out for me
@Wanderer24999
13 күн бұрын
This worked for me, but the metal gear part in the center under the washplate is still stuck on it. Any ideas?
@Z71HamBone
13 күн бұрын
Split it with a grinder
@paal1576
Жыл бұрын
thank you …brilliant
@imnotagaot
Жыл бұрын
What’s the slow way?
@LiberatedMind1
11 ай бұрын
lmao
@pezchef7577
Жыл бұрын
I tried this and really struggled (and unsuccessfully) to get the bags under the impeller thing is so snug against the bottom
@Z71HamBone
Жыл бұрын
Use a pic or something to pull up on the plate slightly..
@pezchef7577
Жыл бұрын
@@Z71HamBone two pick handles have been yanked off in this process. got 1 more and 1 more bag to get under. I find sliding them in on the weaker/thinner parts then shimmy over to the winged areas to be 'easiest'. this damn impeller. I've been trying to get this thing off, periodically, for about 8 months
@Z71HamBone
Жыл бұрын
@@pezchef7577 yes finding the areas that you can get under and working the bags into position is the trick here
@pezchef7577
Жыл бұрын
still can't get this stuck ducker off. I think I'll wait til spring so I can do a full system teardown outside. this plate will come off the machine or the machine will come off the plate, one way or another
@TienTran-pl2pj
Жыл бұрын
Hey thanks quick question what's that tool you use with the hammer
@familyplan979
Жыл бұрын
That is called a punch, they come in various sizes.
@dizzy_dez2303
Жыл бұрын
I CANNOT GET THE FUCKING BOLT OFF! MY HANDS ARE DEVELOPING 3 LESIONS EVERY 5 MINUTES ! HELP! I feel like I'm gonna cry...
@bruhbry831
Жыл бұрын
Probably because the plate is moving with it? I used a small ratchet, and held both the plate and ratchet and banged it with a hammer to free it loose, gotta get creative 😂
@mikedendooven6484
Жыл бұрын
I had to use an impact drill. I had to pushed down on the drill kind of hard. The bolt did loosen.
@perpetuallymediocre3453
Жыл бұрын
I had to just impact as well
@djnemesis82pluss1877
Жыл бұрын
Just had 3 stuck in 2 days 3 hours with nothing I’m trying this fosho
@briancampbell5873
Жыл бұрын
All that you need to do is in the center where you took screw out. Get a set of plyers and pull up. The part where the 3 ridges meet in the middle.
@djnemesis82pluss1877
Жыл бұрын
@@briancampbell5873 tell me u have no experience doing this without telling me u have no experience doing this lol
@victorortiz3317
7 ай бұрын
@@djnemesis82pluss1877he's the type of guy to tell a surgeon, "all you gotta do is cut it him open and not kill the man"
@JasonSmith-qx3zh
Жыл бұрын
Heck that a weapon now!
@wendybesse90
8 ай бұрын
Brilliant
@cynthiastreeter6128
Жыл бұрын
Where do I get the bags
@pezchef7577
Жыл бұрын
home Depot sells them 17 a piece in the tool section near the hammers and pry bars
@briancampbell5873
Жыл бұрын
All that you need to do is in the center where you took screw out. Get a set of plyers and pull up. The part where the 3 ridges meet in the middle.
@yogibearyogibear7229
9 ай бұрын
Won't work for me
@perpetuallymediocre3453
Жыл бұрын
😂😂😂😂holy shit…..I read about this video in the comments of another video but it didn’t do it justice
@k3r_house601
Жыл бұрын
Name?
@Z71HamBone
Жыл бұрын
Rhino air shims I think
@derektuttle1054
Жыл бұрын
This is not 100% effective. It did not work on my Whirlpool. Bad design and defective drive hub, IMO. My machine was only 6 years old. But, try this method as soon as it makes loud noises on spin cycle-don’t wait like I did.
@mattcrrn
2 жыл бұрын
A shoe string works way better.
@jerrysouthside8597
Жыл бұрын
How so
@mattcrrn
Жыл бұрын
@@jerrysouthside8597 just use a shoelace and pull up truss.
@Z71HamBone
Жыл бұрын
Na man
@bruhbry831
Жыл бұрын
@@Z71HamBone yeah lol hell nah only if the wash plate ain’t too stuck will it be that easy
@eriktorres8975
Жыл бұрын
Not when that MF'er is really caked on there. I used some screw driver style hook picks and pulled the living fuck out of it and nothing. Till I got tired of it and let It sit for a week and few days I guess the PB blaster I had applied done its thing and it came right off with the picks.
@josephvillegas
Жыл бұрын
Okay but now how do I get it back on I feel like it’s stripped
Пікірлер: 51