Just a note that may save some of you time. I installed in the lowering position on my 22 YZ250 F, you will need the collar an 4 shims on each side to match the camber of the stock foot pegs. 3 shims/washers each side is perfectly level. You will need to use the longer bolts that come in the fit kit as well. If you install in the lower position, you'll need to adjust your shift lever and brake lever lower as well.
@Britt_350
5 ай бұрын
saved me a ton of time. Ty for making this video
@MedleysMoto51
10 ай бұрын
What do I do if I’ve got a set of used fastway pegs with the fit kit already installed and I need to swap the fit kit? I don’t have a press, vice, or the installation tool that comes with the pegs
@bryanreeme8584
6 ай бұрын
I recently did mine.. Buy the proper fit kit and tell them you also need the installation tool. Super helpful folks!.. I used a wooden mallet to drive the collar bushings in or out 👍
Пікірлер: 6