Nice video. Remember that very few add-ons by themselves will make you number one on the track but our FAY'S2 Suspension Watts Link is a great add-on to help tune your suspension for different track conditions and driving style and remember that it can easily be adjusted (one bolt) at the track for more or less rear steer. Thanks for your time 3rd Gen Guy.
@joshuaboehm6419
10 ай бұрын
Really glad that I found your channel, tons, and tons of good content!
@TheMeatheadfan
10 ай бұрын
Been waiting on this video, just installed a trick chassis rear end and was looking to do a form of this set up
@bobd9911
5 ай бұрын
I came across your video here on doing some research on something unrelated on a project that I'm doing. Your video was very informative on the install for someone looking into getting a watts link. A while back when I was getting suspension mods for my 4th gen Camaro. I went with the BMR everything including the watts link. Although mine's going to go on a Ford 9" rear end and welded on. With going everything BMR I got a smoking deal on the price. And I got a better price through somebody else then BMR. Can't wait for my project to be moved further along so I can install this on my car and drive it and see how well it handles
@xXstevieOo
2 ай бұрын
Perfect for California roads 👌
@greasyfingergarage
10 ай бұрын
$700 really isn't that bad of a price considering everything you get with the kit. Compare it to anything DSE and its a steal.
@joshuaboehm6419
10 ай бұрын
I was thinking the same thing, anything in the DSE catalog is wildly pricey.
@greasyfingergarage
10 ай бұрын
@@joshuaboehm6419 All of their stuff is comically over priced. One would think that being bought by Holley would have brought their prices down. Nope.
@aballin4143
4 ай бұрын
Where did you find this for 700?
@greasyfingergarage
4 ай бұрын
@@aballin4143 He said that was the price in the video.
@JimFay-su6cq
4 ай бұрын
Nice video.
@Slowmaro88
9 ай бұрын
Seen you had a post about wilwood Hubs on fb now can’t find it
@JohnTokar
2 ай бұрын
Another question. In the video, you have the bolt going in from the back for the pivot point. I thought it was the opposite. 10:50 mark in the video.
@3rdGenGuy
2 ай бұрын
it can be run either way depending on your clearance. in my case, the taller diff cover was a bit too close to my liking: so I switched the bolt direction.
@nicholaskoenig3106
10 ай бұрын
Man this link looks completely badASS as well...forgot to mention THAT one. ❤
@doolallyproductions7234
10 ай бұрын
Cool maybe ill do this for my iroc in the future Does it make the ride more stiff and harsh?
@3rdGenGuy
10 ай бұрын
makes the rear ride quality MUCH smoother. I cover that in the last min of the video or so.
@mikeschanel6165
10 ай бұрын
Thanks for the great video! I was wondering why you decided on the Fays2 vs UMI watts link? was it the cost or is there something you didn't like about the UMI?
@pacolicious
10 ай бұрын
Have the same question
@3rdGenGuy
10 ай бұрын
So, Fays2 has been making watts links a lot longer than UMI has. the Fays2 is also more "battle proven" and it's cheaper. UMI link also weights more. that and I don't really like UMI stuff personally. BUTTTTT it's not my decision on how you modify your car.
@xxSaladBarxx
16 күн бұрын
shouldn't the link bars be parallel to each other at ride height? looks like the link should be adjusted up
@3rdGenGuy
15 күн бұрын
doesn't have to be parallel. as long as they are EQUAL but OPPOSITE angles.
@z383tpi
10 ай бұрын
Our 3rdgen SRA options: -Detroit Speed quadralink. -Heidt's IRS -Watts Link -Adj. PHB setup Between your your welding/ fabrication skill, and actual motorsports experience,what are your thoughts on DSE's or Heidts offerings?
@3rdGenGuy
10 ай бұрын
DSE does what they know best. and they do 4 links very well. -the -Heidts IRS is probably garbage. I've talked to owners that have installed it, and I don't think Heidts got the geometry right. Lowered panhard bar is the cheapest by a mile as well.
@z383tpi
10 ай бұрын
So cost aside, would you do Quadralink or stay Watts?
@3rdGenGuy
10 ай бұрын
hard to say without driving a DSE 4 link car. Idk if you can install a watts link with their 4 link either. watts links only work with 4 or 3 link setups that have parallel control arms.
@newyork4198
3 ай бұрын
FYI, i come from a fox/sn95 mustang platform, where serious road racers swap out their 4-link for a phb/ta or a watts/ta. From the Ford camp, it’s understood that a 4-link is severely limited, unless you’re looking for a drag race setup. All suspension upgrades are mere band-aids, and bind is always the elephant in the room. Griggs Racing and Maximum Motorsports go into great detail as to why the 3-link is better than the 4-link. I’ve reached out to DSE to ask them why they go the opposite way with the thirdgens, and they never got back to me. I can only assume it’s a compromise between handling and power gained via exhaust clearance.
@JohnTokar
Ай бұрын
Does the distance for the axle clamp from the differential have to be the same? Mine, when made level came out 2 inches for the driver side and 2-1/4 for the passenger side. Yours appears the same, that the passenger axle clamp was out further from the diff. I know with UMI and BMR they state to have them out as far as possible, but all the research I've done on FAYS doesn't cover it. In my mind they should be the same distance if the arms are the exact same length.
@3rdGenGuy
Ай бұрын
The lengths need to be about the same. A longer arm travels a different arc. so if one arm is too long, it'll jam up the watts link. the fay2 instructions do mention that.
@JohnTokar
Ай бұрын
@@3rdGenGuy the arms are the same length (8 threads pivot side, 3 threads axle side) but the axle clamps are not the same distance from the diff. I'd be curious of your measurements.
@3rdGenGuy
Ай бұрын
as long as the center pivot bolt is centered, the clamps can be a bit off. assuming the arms are equal length.
@TheViper99ta
2 ай бұрын
If the rear is NOT centered, what is the best way to move it? Do you need 2 people?
@3rdGenGuy
2 ай бұрын
I used a ratchet strap attached to my garage wall via a hook. ghetto but it worked.
@emmitthill7871
3 ай бұрын
With the watts link can you still install both sway bar and anti roll bar
@3rdGenGuy
3 ай бұрын
sway bars for 3rd gens still fit yes.
@emmitthill7871
6 ай бұрын
With the watts link I know that takes place of the panhard bar but is it still a place or any use for the upper panhard rod
@3rdGenGuy
6 ай бұрын
the upper panhard support bar is deleted. the watts link is like 5x stronger than the upper panhard bar.
@emmitthill7871
6 ай бұрын
@@3rdGenGuy ok thank you
@Airwolf1971
10 ай бұрын
Thanks for the video
@rw895
10 ай бұрын
Does the lower the bar the stiffer the springs apply to the pan hard set up as well?
@3rdGenGuy
9 ай бұрын
yes, lowering a pan-hard bar lowers the roll center.
@primotote
5 ай бұрын
How About ground clearance?
@3rdGenGuy
5 ай бұрын
it scarifies a tiny of of clearance at the lowest setting, but that's too low for street cars. even I don't run the lowest setting. lowest point is about 4-5in from the ground, so more clearance than my exhaust lol.
Пікірлер: 43