I made it through the whole video with the music on! I think that deserves a free MFT/3 table with a TS55 REQ, right?? Guys? ^^ Nice tools!
@gordonnicol9542
3 жыл бұрын
Thank god for mute buttons L ) There are so many really great music libraries out there with far superior music that might even sounFestoolian.This was such a very bland piece looped to stun !
@julianhurrell6741
2 жыл бұрын
Awesome. Music drove me crazy!
@WillyBemis
Жыл бұрын
Still helpful 8 years later!
@OneWhoWas
7 ай бұрын
- add one more to make that 9 years later. Well put together video.
@pershing6945
6 жыл бұрын
I Love FESTOOL!!! What you manufacture is simply thought out!!! It's just made in Germany!!! Thank you Festool!!! I love YOU!!!
@jamesconnors5653
3 жыл бұрын
Thank you much. Am using mine daily for years now.
@dewaltpropicture9909
4 жыл бұрын
Wowwwwwwww. Nothing beats German tools and technology. Always made beyond expectations 🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙
@krkabob
4 жыл бұрын
I have 2 of these and the MFt3 plus the Apex table. They are work together amazing. Festool is worth every penny. Well... when I bought these a few years ago I thought the price was crazy at $450 but I maned up and made my purchases. Now I want one more really bad, but at $605 I feel that is just WAY to much for work bench. Not sure if I'll pop for one or make my own at this point. But I do love these tables and use them weekly in my shop.
@abidcarpenter
10 жыл бұрын
festool is best no doub tabout that i am useing near about two years they are fantastic products loveable
@fullmetalalkami6466
3 жыл бұрын
Its absolutely amazing what can be done with the bench but it's not portable. My opionon of portable for site work is something you can grab inside quickly when it starts raining and this isn't that, for shop work or areas where its sunny all year round its glorious
@rrr031577
9 жыл бұрын
Your tools look amazing and hope to be able to afford one some day lol. Ive seen the wood whisper and he uses your products and they seem to work amazing when used correctly. You seem to have put a lot of thought in the functions and details of your tools. Great job.
@nicholasmurphy8902
6 жыл бұрын
Great vid, will be setting up my mtf3 this weekend and making some cuts.
@dateebamtebe
10 жыл бұрын
you had me at Festool...
@ericb.davenport9762
5 жыл бұрын
What a catchy tune!
@frankie2234
6 жыл бұрын
Great vid. Very indepth.
@thethirdman225
4 жыл бұрын
Yeah, nah. Some of these things are just too complicated. Think I like the Kreg better but it doesn't seem to be available in Australia.
@wolf-bv6lg
4 жыл бұрын
Crap, I just spent $3000 on festool and now I want this
@carbb5760
4 жыл бұрын
wolf lol yeah I did the same 😂😂😂
@ealdydar
3 жыл бұрын
How accurate should the MFT table be? For instance the Festool MFT and such. Reason i ask is i purchased jig to make the grid and was not happy with the accuracy. I could not get past a 6x16 hole layout with out seeing runoff due to the guides locking in the jig had some slop. I might get it to be better if i add around the template guide to tighten the tollerances. But when i contact the manufacture they claim that tables are never accurate its the fence system that makes the accuracy and i was expecting too much even thought there jig was at a premium price off $199. Purchased this one due to UJK was out of stock but now i have one but have not used it yet. This was the response when i gave them the numbers that either the jig was off or the supplied Template guide was off. Hello Cliff. There is a big misconception with MFT tables and tops. The accuracy of a Festool MFT table comes from the actual rails that are part of the table itself. All of the Festool attachments are attached and referenced off of the rails. Not the table. If you think about all the “connections” from the router to the actual hole there are a lot of variables at play Router bit. Bushing to router. Bushing to template. Indexing pin to template. Indexing pin to hole. Locating pins to the template. Locating pins to the workpiece. potential runout in the router collet There has to be sufficient clearance between each of those for them to work. As you add holes, that “stackup” error will grow. The only way to avoid that would be to key off of the same location for each hole. Essentially what a CNC does. You want to make sure that there is no movement in the template when drilling the first holes. The template must be firmly clampled in place. The Festool MFT table is a clamping/work table. Without the additional fence system, it cannot be used to make accurate cuts. Once you install the Fence system, you must calibrate the track to the fence. At no time are the holes a part of that calibration as the holes are only used for clamps and stop etc. Even if done on a CNC, with the movements and wear in MDF/wood, even the Festool table is not very accurate. Check the Festool marketing data and you will not find anything about using the holes to make cuts, only for work holding. The accuracy comes from the MFT table rails.
@Ericec4126
9 жыл бұрын
Man Festool has a lot of nice tools to bad I can't afford them.
@dewaltpropicture9909
4 жыл бұрын
Ericec4126 get a mortgage 😂🤙
@wallacelux
5 жыл бұрын
Looks great! Is it really mobile though?
@MarkHarrisonBNE
2 жыл бұрын
Thanks for the video. I would have eventually figured out how to put this together but this was a lot easier to assemble with the video. The assembly document that come with the MFT is utterly useless. The diagrams are far too small to show enough detail. The written instructions are pitiful. Festool should just have a QR code that links to this video and just abandon the rest of the document! Thanks again.
@kirkmccoy9729
8 жыл бұрын
Yes, you cut the table..... you'll make most of your cuts in the same place.
@hoplahey
10 жыл бұрын
At 08:49 you are about 2 cm off your mark... Does the cut not align with the rail when cutting in an angle?
@hoplahey
10 жыл бұрын
***** At 08:20 the mark was made and the rail placed on it. That's why I wondered about the final cut. When I saw it again after your response I see they moved the rail so it's not at the mark. So it seems to confirm your claim of multiple takes.
@herrklein
10 жыл бұрын
At 5:56 you're setting cutting depth to 7mm on the upper scale. I assumed that this scale takes the guide rail into consideration, so that it will actually cut 7mm into the table, not 2mm as intended? Shouldn't the depth be set to 2mm on this scale (or 7mm on the lower reading)?
@herrklein
10 жыл бұрын
***** Thank you for your answer. I'm afraid this is not correct. I just purchased an MFT and a TS 55 REBQ, and I watched this video before triming the guide rail. I did use the setting in this video of 7mm on the "depth with guide rail" setting, but fortunately, I added a piece of scrap material instead of making the first cut into the table. I can confirm that the setting in the video will cut 7mm into the table and ruin the MFT where you should never cut more than maximum 5mm. You can actually see at the start of the cut that it is far too deep. The correct setting for cutting directly into the table with only the rail is 2mm on "depth with guide rail" and 7mm on "depth without guide rail". It would be advisable to make a note of this in the video.
@MREJ63
7 жыл бұрын
I agree with Lasse. Unfortunately I cut as indicated in the video and it cut 7 mm into the table instead of 2 :( When I sat down and thought about it, I realised that the video should have shown the FS scale set to 2 mm not 7mm as it did. If they had used the non-FS scale 7mm would have been correct. If you look at the blade depth when they start the cut at 6.00 you can see they make the mistake described as you can see its way deeper than 2mm. Additionally, I believe you can even see this erroneous cut at 10:57, but they have turned the table upside down by then. It is disappointing that this was pointed out 2 years ago and the video remains up and unchanged. I wonder how many other people have followed this official Festool video and compromised their table like me, but without even noticing? Please do something about this Festool to help others in the future as it leaves a very bad taste in the mouth and not a good way to start off with my new MFT.
@herrklein
7 жыл бұрын
Ouch! I'm so sorry to hear this. You should ask Festool to give you a replacement top based on this experience - or you could turn it around and use the other side.
@deanoinmorley
7 жыл бұрын
It's not rocket science to set the depth of cut up, I use the same technique as festool advise, put your saw in the rail drop it down until its hitting the table and add a couple of clicks. It's basic set up.
@rustycartman1997
10 жыл бұрын
Bought a MFT/3 yesterday after years of wanting one. Very disappointed in how out of square it was out of the box. I'm working out of town and didn't have a good square with me. Setting this up by way of trial and error (making a cut, then flipping piece over, make adjustment, repeat, over and over) was very time consuming. Later in the day I had to slide the fence back to allow for a wider cut and had to repeat the whole process. This morning it was out of whack again. After stopping work to go back to the tool store and dropping another $100 for a woodpecker 1281 it was super simple and quick to set up, but why in the F do I need an additional tool to make this work?!? When I forked out $688 for a precision table I assumed it would include what was needed to make this work correctly. Why can't they include a simple square, or a 12" square chunk of wood, or something similar to make this work properly. Between the time I wasted yesterday and the time spent traveling to purchase needed tool today I'm quite annoyed. On a side note, for some reason my fence does not line up with the holes worth a hoot. Table/saw is currently cutting perfectly square, but hole closest to the guide rail has about .5 mm between fence and hole, the hole farthest to the left is about 3 mm from the fence, and the guide rail brackets are tight against stoppers. Any help in solving this would be appreciated.
@kirkmccoy9729
8 жыл бұрын
User error.
@andersonplywood9877
8 жыл бұрын
+rusty cartman Just letting you know that we made a layout Square which is ideal for squaring Festool MFT table. It is a perfect replacement for the hard to find, expensive Woodpeckers square ($200+), ours cost only $24.95. Our customers love it here in California. It is actually featured in Festool training center in Las Vegas. It is a CNC cut and we made the Square from rigid Phenolic European plywood for durability. The holes in the body are designed to accept clamps and also to make it easy to hang from the table. www.andersonplywood.com/square-for-festool-mft-square/
@siennapc7637
7 жыл бұрын
Which is another garbage - lol, how dare you sell a ziploc for a piece of stool not to smell... I had the woodpeckers triangle and returned it - mft can ONLY be setup exact by trial and error, that's all
@k.b.woodworker3250
6 жыл бұрын
I bought it a while back. It's good.
@k.b.woodworker3250
6 жыл бұрын
The andersonsquare ,not the mft.
@ztiling5646
6 жыл бұрын
Great multi function bench make easier job i love and have one of them withe coplat accessories
@piee683
10 жыл бұрын
Festool. Does the fence not come with a measure rule on it to use with flagstop
@jeffstanley4593
10 жыл бұрын
Even though the table top is sacrificial, it makes me squirm to see it cut purposely. At some point in time, it might have so many 2mm cuts in it that it could become NON supportive at certain points on its surface. Has this ever happened and what is the cure? I have a TS 75 and it is so beyond my skill level that it was definite want and not a need. Still, when was the last time you regretted owning the best?
@ChadMc74
8 жыл бұрын
Are those Festool jeans?
@brogia88
7 ай бұрын
Ma ogni volta bisogna tagliare il tavolo da lavoro? 😅
@GeraldTheMaker
3 жыл бұрын
ok, what if the material is thinner than the fence?
@mrBDeye
3 жыл бұрын
It's an expensive folding card table with holes on top. K
@migf27
6 жыл бұрын
The music is really annoying.
@jessecosta3781
9 жыл бұрын
Ola amigos: Gostei muito da mesa e os componente que estão juntos. Como faço para adquirir? Qual o preço, e consigo parcelar? Aguardo ansioso por resposta. Obgdo.
@monk1100
2 жыл бұрын
Do you not need to clamp the workpiece down
@meperson
2 жыл бұрын
I don't think this is watched by Festool but the answer is no - the track has rubber grips and you are pushing against the fence. Of course you can always clamp and might need to do so depending on the specific situation.
@Cisco8484
4 жыл бұрын
For something so expensive, I expected machined parts and not pot metal.
@kareem-ahmed-fj5er
9 жыл бұрын
nice
@SuperMirock
9 жыл бұрын
This man used not a Festool tape-measure! It is a treachery!
@tybasinger6637
8 жыл бұрын
The saw itself looks good, but that table looks pretty cheap. Pretty good demo guy but you can see it wobble every time he touches it. Also for a table that costs almost 700 dollars they should have a feature that lets you lock the saw in place and rip like a table saw.
@davexb6595
8 жыл бұрын
The Triton Workcenter does that but it doesn't have the dog holes to use as a workbench like this tool. I'm thinking of owning both.
@iggyguy88897
4 жыл бұрын
Looks good and a smart table but no where close to been worth the $1480 Australian dollars they have it for here . A full weeks wage for that.
@andrewf4239
5 жыл бұрын
Festool bench
@bendrixbailey1430
3 жыл бұрын
Note to self. This table does not come with any of the clamping elements. I have a Kapex so don’t need a table to cut up while making precision cuts on small boards. Ordered this MFT for the clamping, but it only arrived with a bunch of tracksaw accessories I WILL NEVER USE. Should be made clear in this video. Buyer’s remorse. I should have just got a table with clamping accessories, not this overpriced substitute for a miter saw.
@lemoinexavier
9 жыл бұрын
It starts with one table and almost ensds with 3 tables...
@sergiusnet
10 жыл бұрын
а верстак то зачем распилил?
@sergiusnet
10 жыл бұрын
йо майо, пока соберёшь этот верстак забудешь что делать хотел
@giuseppemereu186
8 жыл бұрын
bello interessante ma troppo costoso..............
@basanistes359
6 жыл бұрын
Is that a mdf table top? Is this for special needs woodworkers? Who needs all this just to make some cuts?
@monk1100
2 жыл бұрын
Do they not answer people's questions 🤔
@ericbulington2421
4 жыл бұрын
Why are there a million things you can do? You need a degree in festool... And the miter arrangrment seems fiddly. Lots of steps that could be easy to miss.
@ReplicantDream
5 жыл бұрын
Forget water boarding...just play them this video. That bloody music urrrrrghhh
@Order-in-Chaos
4 жыл бұрын
@Joe: I'm with stupid
@glockstar76
10 жыл бұрын
seems stupid to keep cutting the table top. in a real shop you will be replacing it all the time.
@glockstar76
10 жыл бұрын
***** so weather your ripping down sheet goods or cutting small pieces the guide always stays in the same place?
@glockstar76
10 жыл бұрын
***** I see. Thank you. I own a sign shop and usually make blanks using a sliding miter saw. I have been getting orders for larger signs made from hdu and mdf. Believe it or not I don't have a table saw. it seems like for the space it would take up I would be better off with a mft , track saw and one of your vac systems. a lot more capability it seems then a dangerous table saw. Am I wrong in thinking this would replace a table saw?
@glockstar76
10 жыл бұрын
***** That pretty much sums it up. Thank you for the info and very fast replies. Your a great rep for your company. I will be purchasing some Festool items this week. Enjoy your weekend.
@glockstar76
10 жыл бұрын
***** ok. yesterday I purchased a MFT, TS75, CT36, Boom arm, ETS 150 and a bunch of sand paper and clamps. I have to say im very impressed with every tool I purchased! The sander with the Ct36 is the only way to go period. and the usefulness of the MFT is endless. the TS 75 has plenty of power and adjustment. Im hooked for good now with good reason. Thank you to the Festool rep that answered all my questions the other night. great customer service. I usually don't make tool review vids but I think I will do some on my new Festool section of my shop.
@JohnUk65
9 жыл бұрын
i've had the same worktop for 4 years now in a very busy workshop..awesome bit of kit ..
@kurtnutin3968
4 жыл бұрын
Is it me or do those cross members look like a waste of money
@gregoriovii8746
8 жыл бұрын
It's just me or this guy cut the table every time he did a cut?
@Mystipaoniz
8 жыл бұрын
+Gregorio VII i think it's just you ^^
@Mystipaoniz
8 жыл бұрын
Justin S i think he is cutting the table once though...
@Mystipaoniz
8 жыл бұрын
+Justin S Look at the table. Did you see multiple cuts in it? I don't. I see the guy cutting his stuffs at the same place everytime. You cut the table once, and then you cut your stuffs at the same place to avoid cutting the table everywhere. I think that's what i'm seeing in the video ^^
@user-vv8mm3ro9m
5 жыл бұрын
стол отличный! но в погоне за вес, ножки из очень тонких трубок у меня развалились по стыкам сварки!
@dewaltpropicture9909
4 жыл бұрын
Сергей Степанов да ну на
@mrBDeye
5 жыл бұрын
What is amazing is the people who buy this overpriced flimsy table. Yes it is portable, but look at the cheap hardware and the assembly similar to a 30 dollar folding card table.
@festoolusa
5 жыл бұрын
We're going to assume that you haven't actually used one, right?
@mrBDeye
5 жыл бұрын
@@festoolusa I've had a demo at Berlands House of Tools in Illinois USA
@tomadi2772
6 жыл бұрын
Hey, Thats a good video here. The most complete woodworking plans that I have ever used was Toms Magic Wood (i found it on google). Without a doubt it contains the most incredible woodworking projects that I have ever tried.
Пікірлер: 89