I put mine under the rear spoiler. Right in the middle, I used a wolfbox Camera mirror and the reversing camera through the car to start
@jackkelly7293
2 ай бұрын
Really nice video - thanks for sharing. You explained this fit to my dad an I on the street a few weeks ago. A really fantastic explanation -a lot of detail explained a way a 'layman' can understand. Thanks and i'll let you know if we install something like this!
@so-teq6142
2 ай бұрын
No worries.
@kneh39
2 ай бұрын
Hello, where make you feedthrough for the camera to bumper
@so-teq6142
2 ай бұрын
@@kneh39 If you look under the car behind the bumper in the centre, you will see where other cables also head into the car. There's a large rubber grommet they pass through. I ran it alongside those.
@rossocorsahf
14 күн бұрын
Thanks for a really helpful video, I did mine this week but being a glutton for punishment I put mine on the hatch handle, took me hours and hours to do but I like to make everything look as factory as possible including binding the wiring with cloth tape etc. I just cut the RCA off one end of the supplied cable and then replaced it later in the process, getting the wire through the rubber sleeve and down the frame on the side of window was still difficult, used thin welding wire to pull them through. The power lead isn't long enough to reach the lower area so I added an extension cable and it was this that I pushed though the sleeve then added terminals later to connect it. The hatch handle needed to be modified to accommodate the camera cable by adding grooves for it to sit in, there is a rectangular hole that the cables can exit through already in the hatch. To avoid having to remove the radio when fitting the main unit I added a RCA cable to extend the connection on the loom, this meant I could connect the camera at my leisure with a connection near the sill area.
@so-teq6142
13 күн бұрын
@@rossocorsahf I had cut the end off the cable and used a 1mm copper lighting cable with the insulation removed to try and fish through the sleeve. It wasn't happening for me and I spent about an hour trying to do it. In the end I decided it wasn't worth all the effort and went for the bumper. I've just done the rear speakers. I'll upload the video at some point.
Пікірлер: 8