It is actually a terrible system, because the cable that runs in that tube rusts solid. There is then no way that you can get at the mechanism to free it up because the wheel is in the way. You really would think that Fiat would put checking the spare wheel mechanism in the service schedule, but they didn't. The spare wheel is completely unprotected so it's going to be soaked in water and salt spray. So the garages never check it, and when you have a puncture on the highway there is not a thing you can do about it.
@user-ww8jj6mf7j
3 ай бұрын
Thanks for this video. It’s a breakdown service for me
@carolineh2396
3 ай бұрын
Many thanks for posting this… it has really helped:)
@MrMeltedwellies
3 ай бұрын
You're very welcome!
@An.Individual
Жыл бұрын
If you want to put the alloy in the carrier after a change then you will need an adapter. Also there should be a remote valve tube to attach to the valve before you raise the wheel.
@SuperchargedLlama
Жыл бұрын
Mate, thank you! I have been struggling with this on my vauxhall Combo, winding it out further (thought it was) so that I had room to then articulate the holding bracket.
@MrMeltedwellies
Жыл бұрын
Glad it helped
@tonybreen8014
Жыл бұрын
Great video, I was struggling to work out how to do this, thanks!
@MrMeltedwellies
Жыл бұрын
Glad it helped!
@miniman1sahaja597
10 ай бұрын
good demo was wondering if this is same as Combo and is except for location of the wind down mech which is accessed through a hole in rear trim thanks
@steinhoekzema4599
4 ай бұрын
Dankjewel we kunne weer werkje
@user-ww8jj6mf7j
3 ай бұрын
Hi just an update . Had my wheels changed on my Roller Team 747. The mechanic found you can’t access the spare wheel winch because the side skirt doesn’t allow access.
@Deiseboi
2 жыл бұрын
Thanks Mark save me time working that one out.
@MrMeltedwellies
2 жыл бұрын
No problem 👍
@Daimo83
10 ай бұрын
Nice one buddy i dont even have the mechanism so ill probably fit a spare on the door using a mount like a land rover.
@1984neilwat
Жыл бұрын
Easy to follow, thanks
@MrMeltedwellies
Жыл бұрын
You're welcome!
@barrydavey1769
5 ай бұрын
Cool. Thank you
@MrMeltedwellies
5 ай бұрын
No problem!
@bambelelankomo9836
8 ай бұрын
Is this the same as the iveco daily 35s?
@mikelane4896
Жыл бұрын
On the winding mechanism there is a window which has an indicator to let you know when you have wound up to the correct torque! You haven't mentioned this!
@dalwynreisima2111
10 ай бұрын
Yes a yellow line appears in the window - stops you from over-stressing the holding cable!
@andreaporcu4702
2 жыл бұрын
Hi my mechanism is locked up so I can not release spare tire. Can you help me? Thanks
@MrMeltedwellies
2 жыл бұрын
wd40 tap with a rubber mallet
@wisdommataba9701
Жыл бұрын
My spare wheel spaners were stolen and I can not take my spare wheel out can you please assist
Пікірлер: 25