Great work. Nice to see there are still people out there who take pride in their work & do things above and beyond what's required!
@FyBurz
Жыл бұрын
Thanks!
@fibconetfttxsupplier2424
6 күн бұрын
Great installation video! The waterproofing performance of those connectors looks really impressive!
@--Zook--
Жыл бұрын
I just got your channel on recommended. I have never worked in your industry, ( I am in road maintenance ) but I love seeing other tradesman who are professionals and take pride in their work. It's also super interesting to see everything that goes into the job.
@FyBurz
Жыл бұрын
That’s awesome to hear man, you might also enjoy some of my civil work videos. Doing digs and such. I’m the same way about watching professionals do their job.
@--Zook--
Жыл бұрын
@@FyBurz I'll def check them out. The thing that won me over is you cut the tails in the zip ties. ...lol
@FyBurz
Жыл бұрын
@@--Zook-- always haha😅
@ww2717
Жыл бұрын
Very professional job done well. Most techs don't care anymore. You care about the quality of your work
@FyBurz
Жыл бұрын
Thanks!
@Trigeria
Жыл бұрын
Your application and expertise in this matter were professional, thorough, and educational, JOB WELL DONE. I showed my technicians who are starting to run aerial drops now as we mostly doe underground, HH/MH from splice closures the ease of installations this process makes and Major don'ts with regards to OSHA and electrical code standards that they're now training for. Thank you! The only thing I'd have to say is we run 2 techs at a job site like this when the height of ladder is extended past 20ft or more on poles.
@FyBurz
Жыл бұрын
Hey man, I really appreciate the comment. I try my best. Regarding the two techs, I am an independent contractor, and while I do hire out when in need. I have over 10 years of ladder handling experience. So I am pretty confident running solo.
@Trigeria
Жыл бұрын
@@FyBurz You're welcome! Yea I'd say it depends on the company's policy. As we tend to go on roofs and towers as well. Anything that could or would potentially happen we ensure the safety with guidance from a lead tech/installer.
@FyBurz
Жыл бұрын
@@Trigeria yeah that’s what I was going to ask actually. Weather it was custom or policy. I was a roofer for a long time and took some falls 😅 nothing makes a better lesson 😂
@Trigeria
Жыл бұрын
For sure I did roofing 1 year up in the mid Michigan Area and anything at 30°F you bet you're but you're working. I did a lot of repairs as a sub contractor. My lifeline was always a large sponge from a couch cushion. I trusted that thing more than anything. The scary jobs were always the metal roofs though in my opinion 😅
@FyBurz
Жыл бұрын
@@Trigeria I did 5 years of flat roofing 2-3 of sloped, the cushion was key 🔑 😅
@EddieButler-fv9tr
Жыл бұрын
That hurts my soul to see such a cluster
@FyBurz
Жыл бұрын
Tell me about it 😅
@caseywilcox1340
26 күн бұрын
You have a good work ethic. I run into the same thing in handholes , spaghetti mess. I've been splicing for about a year and half. How much does a install pay out if your a contractor in your area.
@LouisFuller85
2 күн бұрын
The School you went to has Trained you well❤
@FyBurz
2 күн бұрын
@@LouisFuller85 I’m self taught 😅
@LouisFuller85
2 күн бұрын
@@FyBurz That is amazing👍💖
@BIGB-wc6vr
Ай бұрын
In the uk it is mandatory to test the pole before climbing.
@FyBurz
Ай бұрын
@@BIGB-wc6vr yeah, mandatory for mandatory sake doesn’t work here because techs just go off of their own judgement whenever I see a pole that’s not in good condition or in questionable state I test it and I also voltage test my poles. sometimes it’s a slight risk but the jobs gotta get done, that being said I’ve definitely rejected jobs due to unsafe poles. This post specifically was reported and replaced.
@Brad.W
3 ай бұрын
I made it easy for my fiber installer I knew I would not be continuing with my cable or DSL service so I spent the time removing a garbage cable service box and drop.
@FyBurz
3 ай бұрын
Very nice I do it often. Love cleaning it up.
@thecooldude9999
Жыл бұрын
Great video with a great soundtrack!
@FyBurz
Жыл бұрын
Haha yeah. I was enjoying it myself 🤙🏼
@DdosedRS
21 күн бұрын
Rewatching all the videos :) I wouldn't of climbed that pole, the cracks in it are way to deep. I would of safetied the job and it would of went to a bucket truck or a replacement pole would be installed. I understand you sending it since you're paid by the job and not by the hour.
@FyBurz
21 күн бұрын
I took some precautions. Kinda in a bind, but the pole was reported and replaced
@austinreeves5221
3 ай бұрын
Fuck those guys. You are out working and they are partying mid day. Glad i just found your channel. I do commerical fiber and data but this is super interesting to me. Wish I could do it for a day or so for fun
@FyBurz
3 ай бұрын
Join our discord! Link in bio of new videos
@tchambers1701
10 ай бұрын
Beautiful work 👏👍
@FyBurz
5 ай бұрын
Thank you!
@tchambers1701
5 ай бұрын
@@FyBurz your welcome 🙂
@jordansoviet23
3 ай бұрын
If you think that's messy then that's nothing compared here in the Philippines where wires and cables are like spaghetti wires anywhere even in posh subdivisions. You can Google telephone cables in the Philippines for images.
@FyBurz
3 ай бұрын
I’ve seen haha😅
@jordansoviet23
3 ай бұрын
@@FyBurzall telephone lines here in the capital region I'm living are now fiber optic but the old copper telephone cable lines are still hanging here. Last November the electric company cut off all internet, telephone and cable TV lines in one section of my hometown. It took a month to replace all cables and drop wires but they never removed those that were cut off and abandoned.
@l1nx2112
Жыл бұрын
a real tech uses an sds.. i cant ever go back to the hammer drill after finding that m12 beast
@FyBurz
Жыл бұрын
Yeah it’s pretty great for my applications. The m18 is the real beast. But there’s a tool for every job 😅
@Jamesruiz81
Жыл бұрын
Man if my sup or safety guy would of rolled up on me with that pole I’d be in some shit lol.
@FyBurz
Жыл бұрын
Jobs gotta get done.😅 but yeah we already submitted a replacement request
@travisrobinson430
2 ай бұрын
That sucks,company I work for we only run drops with bucket unless it's rear easment,then it's ladder or gaffs
@FyBurz
2 ай бұрын
I don’t mind 😅
@xLEGNx
Жыл бұрын
Been a contractor tv/phone/hsd copper installs for about 7 years gonna start doing fiber on the side with a buddy who's contracting just running drops only until I get hang of it eventually start doing installs too any tips?
@FyBurz
Жыл бұрын
Watch my videos! I show a lot of tips on running drops. If you want to know something specific let me know and I can make a video about it.
@Trigeria
Жыл бұрын
Make sure that your splicer is dry depending on your area. Splicers do not like being wet at all and that you have profiles set on your splicer for both climate, humidity, and season! 2nd tip leave enough service loop and slack like this pro! He did a wonderful job verbally communicating the ugliness of what improper installation and non-code/ regulations are while showing how it's done. 3rd document everything. The biggest issue out in the field are techs that would brush off unsafe, or improper installs or code violations and leaving it for the next guy! Safety is a big priority! If you feel unsafe do not risk it. Fail the job if need be and report it to your direct superior to get it addressed immediately.
@Trigeria
Жыл бұрын
There are varies different tipes of taps, MST, or HMFOC, Splice Closures, that being said try to familiarize yourself with what you'll be working with MPT/MST are the more simpler application as they reduce the amount of splicing needed for install but as you saw if done improperly it could end up being messy if done improper. It's also a good key note that to think just enough is never enough. ie, if you need a foot give yourself 3-5ft or more for safe measure depending on your application. The other thing to note is if you're using a pedestal or handhole/manhole application that the NID or demarcation box won't always be in the same location where other media closures are. I didn't see a patch cable run to the interior but depending on the type of cable used majority SC/APC OS2 or if they outfit pigtail to pigtail connections to a wall plate/coupler fashion or a direct hole with a bunge that taking the necessary "TIME" to ensure your install is clean is something that you must give yourself.
@FyBurz
Жыл бұрын
@@Trigeria well said
@xMensurx
Жыл бұрын
oh men. if you think thats a mess you should install cable like i do. There is a street where i live that is a nightmare to find the customers drop lol
@FyBurz
Жыл бұрын
Haha I bet. I’ve seen worse but everything about this job was a shit show from start to finish. Pole about to break, nap a birds nest, at the house everything was wrong and sloppy 😅
@xLEGNx
Жыл бұрын
Also our cable aren't pre made don't have the conectors on the ends to just easily connect on top how yours do so I'll have to do all that in the air and cut place a end etc
@FyBurz
Жыл бұрын
Hmm interesting, are they AFL drops ? These are Corning optitaps. You have to splice into fosc cases ? (Black cans up on the strand)
@xLEGNx
Жыл бұрын
@@FyBurz Yup showed up on my buddy's job was just giving me the basics he was pretty much opening the box striping the wire the drop cable was a really thin one still new don't know the wording for it but he was cleving placing the connector doing all that while up in the air not like yours where you just climb up and connect our box he had to open loop the wire inside and connect etc
@FyBurz
Жыл бұрын
@@xLEGNx sounds like AFL. Interesting that they don’t have a connector on the ends. I deal with some AFL stuff. The drop is flat but the end looks like the stripped fiber and it has a green sc/apc connector on it. The only reason I can think of why it doesn’t have a pre-made end is because he’s pulling off a large spool where he makes cuts at whatever length he wants.
@xLEGNx
Жыл бұрын
@@FyBurz yup that's how he told me the company does it just a spool of cable no pre-made ends for the drops only thing that's pre-made from what he said was the line going in to the home for the install techs seems like a little bit of a pain other thing he also showed me not like regular cable where they have pretty much 1 tap every poll with fiber they only have 1 to feed every 12 house fiber is new in the area so sometimes he would tell me he hits 4-7 polls before he hits the house I mean the pay is alright but he tells me he tries to aim at most 3 houses a day lol
@FyBurz
Жыл бұрын
@@xLEGNx yeah makes sense. Interesting way of doing it for sure. And that sucks. Here most neighbourhoods have a mpt (access point) every other pole. But sometimes every 3 poles depending on what company did the initial build.
@dadstuff5923
Жыл бұрын
Man , I wish we used MPT/MST’s instead of splice closures. Hard to believe when you use such a simple system techs would run the drops like shit and still make it sloppy.
@FyBurz
Жыл бұрын
People just want a quick dollar. Take no pride in their work
@alistairism
Жыл бұрын
hey, question for you, your Blue SST striper tool the way you are using it is backwards? or have i been using mine wrong all these years XD
@FyBurz
Жыл бұрын
So I get this a lot from other techs. I don’t use it backwards. I initially push the drop through the right way then I pull back to complete the strip. So I start at the cutoff end of the drop then push until I need to and then back. I’ve found this to be the most successful way to strip the flat drop and I can get about 30 strips in maybe more before have to to switch the blades around. Lots of other guys I know will start with the strippers down the drop where they want to finish and pull out towards the cutoff. Or strip down then take it off and do it again. All of which is slow and inefficient.
@alistairism
Жыл бұрын
@@FyBurz hey, thanks 👍. I'm going to try this next time I need to strip one. The more you know 😊😊
@K0gashuk0
Жыл бұрын
I would almost risk falling vs clipping in to that and risking there being some high voltage in there.
@FyBurz
Жыл бұрын
After I realized the extend of the damage to that pole I unhooked myself 😅
@Leroy1
6 ай бұрын
Milwaukee Rahhhhhh 💯💯💯
@FyBurz
5 ай бұрын
Gang gang 🔥
@dchatzioann
Жыл бұрын
hi my friend ,congratulation for yout work, how much time it took you to finish the installation;
@FyBurz
Жыл бұрын
30 minutes maybe
@miguelmorales3313
Жыл бұрын
Thanks to those leaving a mess, now we have to add a zip tie every 10 ft on main line.
@FyBurz
Жыл бұрын
Gotta love it 😅
@BIGB-wc6vr
Ай бұрын
Have never heard of wall plugs
@FyBurz
Ай бұрын
@@BIGB-wc6vr me?
@westtell4
Жыл бұрын
what part of the country is this
@FyBurz
Жыл бұрын
Bc🤙🏼
@westtell4
Жыл бұрын
@@FyBurz oooh Canada I’m down south
@FyBurz
Жыл бұрын
@@westtell4 ah nice
@michaelcummins5834
Жыл бұрын
Looks like inhouse work
@FyBurz
Жыл бұрын
Definitely 😅
@kurtiz0305
Жыл бұрын
What’s that 584 box called? Please and thank you
@FyBurz
Жыл бұрын
That’s just an old school copper slick. Where copper drops start from
@markanthonysalabit3771
2 ай бұрын
I want to apply 😢
@Berry500Laps
7 ай бұрын
How is your fiber that strong? I get no light if i drop the spool on the ground
@FyBurz
7 ай бұрын
🤷🏻♂️
@Werfed
7 ай бұрын
How much time do you get allotted for a job like this and what's your pay?
@FyBurz
7 ай бұрын
As much time as I want. And I’d rather not disclose. Sorry
@Werfed
7 ай бұрын
@@FyBurz Fair enough. I'm an installer on the island. We're expected to run missing drops like this, but don't get extra time. Likely why a lot of drops you see are poorly done and not code. It's terrible system. Your videos are very insightful. Thanks for your clean work, helps a lot at house side.
@FyBurz
7 ай бұрын
@@Werfed much appreciated man, and yeah techs get the short end when it comes to drops. Just do your best!
@ArthurCervantes-mv7rr
5 ай бұрын
Que tipo de fibra ? 12 hilos??
@FyBurz
5 ай бұрын
Mi cable es solo una fibra.
@ArthurCervantes-mv7rr
5 ай бұрын
@@FyBurz gracias por la respuesta ,muy buenos tus vídeos gracias por compartirlos, excelente trabajo,saludos desde Barranquilla Colombia.
@FyBurz
5 ай бұрын
@@ArthurCervantes-mv7rr jaja gracias. Capas que ago un video en español 😅
@joaozacarias7637
Жыл бұрын
How is it insise the house?
@FyBurz
Жыл бұрын
From my box a fiber clear curve gets spliced then brought to where modem will be installed with a SFP
@ceangasrevenge
Жыл бұрын
Are you a sub or do you work for the provider ?
@FyBurz
Жыл бұрын
Sub
@francodabronco3692
Жыл бұрын
Gotta be Seattle or at least washington state.
@FyBurz
Жыл бұрын
Bc Canada
@norriswass-little8091
Жыл бұрын
Hey dude where in bc? I’m doing drops in on the island!
@FyBurz
Жыл бұрын
@@norriswass-little8091 nice man that must be fun, I’m in the koots 🤙🏼
@stemmentor9700
11 ай бұрын
Glad to see you take pride in your work and recognize non code issues. Good job. And I would have been a bit freaky with that pole too 🫣
Пікірлер: 106