Genius!!!! Just made my stress of trying to figure how to make paper models more realistic go away lol.
@edwardlee8602
3 жыл бұрын
Awesome instructions, this works for RC planes as well, without the heat gun, vacuum form, etc. Thanks!!!
@chipfyn1
3 жыл бұрын
You're welcome. Some of our planes at www.Fiddlersgreen.net are aerodynamic enough to fly.
@ThePaperMaster
5 жыл бұрын
Thank you so much 😊 all of my models just have the colored canopy now I know how to make it more realistic. Thank you
@antonnz5310
5 жыл бұрын
Very good video! Thank you for sharing the idea.
@chipfyn1
5 жыл бұрын
Glad you liked it! Thanks for commenting.
@mrratskins
11 жыл бұрын
This is the best modelling tip video I have ever seen! Kudos!
@neycandido5540
4 жыл бұрын
Man!!! I fought a lot with transparency that is hard to work and gets very dirty when glued! You're genius!!!!
@chipfyn1
4 жыл бұрын
There is also another method that Bob Lutz is working on using a vacuum and heat formed plastic. It is great for the more curved shapes on a clear canopy for a paper model.
@sureshkumarpradhan4756
3 жыл бұрын
Thank you so much . Now I will give my ojimak hal LCA tejas a real look . Thank you so much again . Have a wonderful life 😊
@JohnJaegerwaddy-john
12 жыл бұрын
What a great video! I'm just starting down the road of card modeling and your video has cleared up a lot of questions I had. Much thanks and looking forward to any of your videos. Well made too.
@richardbenko1
13 жыл бұрын
HI chipfyn1, Thanks for sharing this technique / process... Good idea !!!
@Star_cab
11 жыл бұрын
I wondered that too,but as I watched when he cut the tabs out on the 1st layer of tape it left gaps.then when he taped the back the cut gaps where now sticky. Smart.
@mybluebelly
12 жыл бұрын
You know, these folks were dealing with here like to build static paper models, but a fair amount has opened their eyes into incorporating micro r/c and stufff into these small paper models and may also apply a small amount of depron foam. I don`t think it`s "all that" but it is modelling, and i like modelling. Both plastic and r/c. I`m even contemplating doing a few of these fiddling paper models. fourmost the Caproni Stipa "flying barrel" as these odd birds are somewhat amusing to me ;-)
@TheIndyCanard
14 жыл бұрын
Hi i love your model they look great i have made a few using your ideas including a b-52, b-17,and tbf avenger!
@cometsan1644
5 жыл бұрын
beautiful
@chaiwatkom
14 жыл бұрын
Thank you uncle Bob!!! I will soon make my video to constribute my vaccumm technique!!
@Pookleberry
12 жыл бұрын
Great video!! So simple!! (all the best ideas are!!) Thanx for this!!
@mierdiweb
5 жыл бұрын
Fantastic! I like it!!
@chipfyn1
5 жыл бұрын
I'd like to do some videos that help people learn how to design models. Perhaps some step by step tutorials on the graphics software?
@josejn2007
9 жыл бұрын
Useful video. Thanks.
@MrSniperking20
13 жыл бұрын
thank you VERY much for making this video!
@lvperalta
12 жыл бұрын
thanks Uncle Bob!
3 жыл бұрын
Great work. Greetings. Aleš 😎👍
@alifinosaktiramadhan5727
3 жыл бұрын
Thank you for the tutorial !
@chipfyn1
3 жыл бұрын
You're welcome, and thanks for the comment.
@andersonvieiramayer6420
3 жыл бұрын
Maravilhosa!! sua dica!!!
@rafaeldavid32
3 жыл бұрын
I've watch this a few months back and it is a really good technique despite I'm using cardstock (160 GSM) but it made my sopwith camel model luminated though, thanks btw.
@chipfyn1
3 жыл бұрын
You're welcome, and thanks for the nice comment. It made me luminated.
@ronkemp9528
2 жыл бұрын
Great job Thanks
@ronkemp9528
2 жыл бұрын
@@chipfyn1 If your talking how to videos you could do landing gear rolling them is a pain must be a better way.
@Piter_Play
2 жыл бұрын
Simple, but effective!
@philipgill7600
11 жыл бұрын
Brilliant! Thanks for this
@ysvry
13 жыл бұрын
great tut, thx for sharing.
@germanarevaloaraya2593
3 жыл бұрын
Gracias
@chipfyn1
3 жыл бұрын
¡De nada!
@MrCrossbiker
12 жыл бұрын
Thanks,very good idea !
@Jack-yt5us
2 жыл бұрын
I really need this thank
@eyvazcalskan1643
2 жыл бұрын
👍👍👍
@Mk3cav
5 жыл бұрын
Amazing I used some tape on my b17 bomber.
@chipfyn1
5 жыл бұрын
How did it come out?
@Mk3cav
5 жыл бұрын
@@chipfyn1 quite good, I'll do a video on it later.
@wattwaster5936
5 жыл бұрын
I like.
@dlopez7671
3 жыл бұрын
Thanks!!
@douglasw.7864
2 жыл бұрын
R.I.P. Chip 😞
@thebamology
13 жыл бұрын
I'm waiting for your A-10 Paper model :)
@LunixPeru
4 жыл бұрын
Master!
@TheOutlander82
3 жыл бұрын
hmm not bad, but i think sticking a ciggaret packing foil only from inside looks better
@chipfyn1
3 жыл бұрын
What if you did both? You could have the clear packing tape canopy on the outside and the tin foil on the inside. Sounds interesting.
@maximolotov
8 жыл бұрын
wicked !
@davidrasch3082
3 жыл бұрын
I didn't know you were still in business...
@chipfyn1
3 жыл бұрын
Yep. Two generations now. We have to stay in business to make sure everyone can still get their models.
@davidrasch3082
3 жыл бұрын
@@chipfyn1 I'll have to get in the groove.
@chipfyn1
3 жыл бұрын
@@davidrasch3082 You have hundreds of models in your online folder. I sent you an email to help with that. Did you get it?
@davidrasch3082
3 жыл бұрын
@@chipfyn1 Sure did. I'll be exploring Monday morning before me and my handicapped son go out for yard work. He loves to watch me work-maybe because I play Beach Boys and CCR while I work. Its time to share some creations with my grandkids.
@pablosotelo4075
12 жыл бұрын
Bravasooooooo
@ninethminecraftxd1557
4 жыл бұрын
Thanks i have spitfire whit rerestic canopy!
@corneliusthegreat6794
2 жыл бұрын
I discovered these models on Google when I was in 7th or 6th grade and I always wanted to know about the website I seen it and it looked like it just been abandoned
@chipfyn1
2 жыл бұрын
Nope, it's not abandoned. It gets updated every Saturday with 7 free models for everyone who has an active Magic Keys subscription. WHy do you say it looks like it's abandoned?
@corneliusthegreat6794
2 жыл бұрын
@@chipfyn1 I actually just looked at the website and yeah I see it now anyways you kind of can see how the website is kind of looking really old and how Google says it's not a secure website but now I see it is active
@JoshFlyes
12 жыл бұрын
Ooh do tha sky crane plzzz
@TheIndyCanard
14 жыл бұрын
How do you make canopies for the Cessna 172 Skyhawk when there is no frame on the windshield ?
@donnywhitedonny6221
7 жыл бұрын
coke bottle,heat and practice
@coolkidjeff082
3 жыл бұрын
When you buy a template from the website does it give you instructions on how to make it?
@chipfyn1
3 жыл бұрын
Yes. Most of the models come with an instruction sheet, which is a basic diagram of how the parts fit together. It helps to have a picture of how the paper model is supposed to look when it's done. A lot of the building models had that printed on the back of the postcard before the internet was around.
@coolkidjeff082
3 жыл бұрын
@@chipfyn1 ok thanks for letting me know. And that’s cool how they used to do it
@andreivaulin6066
4 жыл бұрын
👍👍👍👍
@The_Kaiser7
3 жыл бұрын
what is the name of the glass
@chipfyn1
3 жыл бұрын
It's called packing tape, or sometimes packaging tape.
@walidkhan8327
11 жыл бұрын
Then you will have no tape left to attach parts at last stage.
Пікірлер: 76