It is important to (feel by screwdriver) metal tabs which should be pressed to release the locks, also screwdriver should to be at proper depth and angle (height) in the hole, but in straight position (from your view). I recommend to use insulated screwdriver then you will not scratch the paint near the holes edges to release lock. the hole works as rest for the lever and you should to press screwdriver handle down to release the lock. once both locks are released you will see small gaps between the light plastic and the housing. you will need to press the tabs more to fully release the locks and rotate the lamp to remove it from the housing. at my case the lamp was stacked at the bottom edge near the glass (because there is tight) despite that top edge was released so it was difficult to remove it. the best way is just gently moving lamp forward and backward. I do not recommend to try to use screwdriver to lift the lamp from the front at any case, but you can use your fingers to pull it slightly and move left and right. if it not goes sometimes better is just press it in and start everything again. before you start good idea is to clean the lamp and surface around.
@frankboyce6428
7 жыл бұрын
Thanks this help me a lot at first a thought is was screws easy when you know how
@1987RaPsCaLLioN
6 жыл бұрын
Perfect! Thank you
@sonofanarchy6628
5 жыл бұрын
I was lost lol until that video
@Rajinderkumar-oh7sy
6 жыл бұрын
Lot of thanks
@gadgetuk48
2 жыл бұрын
Changed bulb but still not working?, could this be a separate fuse to the brake lights ?
Пікірлер: 10