Thanks for this video! So could I connect the transmitter to my camera via HDMI, and then connect my on-board monitor to the transmitter via SDI, while at the same time transmitting the signal to another monitor via the wireless transmission?
@FilmmakerSurvival
3 жыл бұрын
Thanks for watching! Yes, you can use pass through with HDMI in and SDI out on the transmitter while still sending a wireless signal to the receivers.
@westimagefilms
3 жыл бұрын
@@FilmmakerSurvival awesome, thank you!
@eliotroach534
3 жыл бұрын
I Support you Man… Keep it Up! Film (especially Camera Department) is a type of Dedication that only we Know & Understand
@HariomParihar
2 жыл бұрын
it's perfect tech Review forever
@ascnsnstudio
3 жыл бұрын
Awesome video, super informative! Helped us decide on going with the Teradek Bolt 4K LT 450!
@techfury3301
3 жыл бұрын
I love great product review. I'm not a technology guy, but I like innovation, Let's be youtube mat!!! 😎
@FilmmakerSurvival
3 жыл бұрын
Thanks for watching. Im a fan of all kinds of tech too!
@dominiccole
2 жыл бұрын
What an amazing channel! Thanks so much for sharing you knowledge!
@FilmmakerSurvival
2 жыл бұрын
Glad you enjoy it!
@JonasZelinkaFilmproduktion
Жыл бұрын
very good video!! thank you very much for your time to make this long informativ good video
@nathanstevens4614
Жыл бұрын
Very helpful, thank you. Just What I needed to know before purchasing.
@isaacbedford3644
3 жыл бұрын
If my calculations are correct the 750 LT standard kit + 2 x battery plates for the RX is the cheapest option. Standard: $2790, + battery plates: $2790 + 318 = $3108 TX + RX separately (no battery mount): $3280, + battery plates = 3280 + 318 = $3598 Deluxe (w/ gold mount) $3720 ....So expensive for up-and-coming filmmakers.... Buy once, cry once I guess
@RyanChann
3 жыл бұрын
Where can you buy the RX battery plates?
@isaacbedford3644
3 жыл бұрын
@@RyanChann on the Teradeck website under batteries and accessories
@yuan-jia
3 жыл бұрын
I guess the bigger peli case has to be taken into account.
@MagicProductionOfficial
2 жыл бұрын
Hello , i try to update my teradek bolt 4k lt 750 rx from pc with boltmenager , at some point shows an error and i turn it off and when i turn it back on show on dhe little screen “please wait” , cant connect anymore with mobile app or pc with cable! Please halp me
@FilmmakerSurvival
2 жыл бұрын
Not much I can recommend other than power cycling or removing power for a couples minutes and then powering back on. You may have to contact teradek and send it in to them. Good luck!
@BAY___BAY
3 жыл бұрын
Thanks for the great videos!! loving the content.
@FilmmakerSurvival
3 жыл бұрын
Thanks so much! Let me know what else you'd like to see.
@dannylorenze6188
3 жыл бұрын
Thank you, great video
@FilmmakerSurvival
2 жыл бұрын
Thanks for watching!
@jacksingh8013
2 жыл бұрын
Dude. I kinda love the power button lol.
@FilmmakerSurvival
2 жыл бұрын
It's definitively easier to find! lol
@cjadams7434
Жыл бұрын
They i think updated firmware to accept luts i believe also bolt 6ghz systems are now out and same prices
@highdynamicphotographyfilm2235
3 жыл бұрын
Thanks for the review.
@FilmmakerSurvival
3 жыл бұрын
Thanks for watching. I hope to do more of these videos.
@janiswolf
3 жыл бұрын
great review 👌 it would be awesome to see a simple latency test. for example with a clock running and filming the screen of the camera and the screen connected to the receiver :)
@FilmmakerSurvival
3 жыл бұрын
Great idea! I'll see what I can do.
@pedrodanielu
8 ай бұрын
Thanks for the video! For car stuff which system you think suits better for really long distances?
@WardVisionFilms
Ай бұрын
Can you add 2 transmitters to one Receiver? I have 2 cameras and I want both on my directors screen?
@FilmmakerSurvival
Ай бұрын
You would have to either have 2 Teradek systems and have both receivers into your directors monitor that has multiview capabilities. OR if your monitor doesn't have multiview, you can use something like a Blackmagic Multiview 4 to output 2 to 4 cameras to one output signal in multiview. Either way, you need two teradek systems if you want it to be wireless that way.
@FilmmakerSurvival
Ай бұрын
You could also hard line into the Blackmagic Multiview 4 and output to one teradek system to send both images to a monitor with one receiver.
@donnybristol
Жыл бұрын
Hello, does it do intercom? Could I use this to send clear com or some other system for communication between director and cameraman? thx
@FilmmakerSurvival
Жыл бұрын
For coms I would recommend the Hollyland Solidcom C1. The Teradek can transmit sound from the camera but it can't work as a com system.
@FilmmakerSurvival
Жыл бұрын
To clarify, the audio is sent to the rx and if connected to a monitor with speakers it can play audio.
@donnybristol
Жыл бұрын
@@FilmmakerSurvival Gotcha, thank you!
@clarenceraymond1406
2 жыл бұрын
Hey Great video. How does it hold up in a house when transmitting between rooms and walls? Working on set at the moment with the Hollyland Cosmo 600, but I'm losing a lot of quality when transmiting through walls even though I am just around 20ft away.
@FilmmakerSurvival
2 жыл бұрын
It works well indoors. In my opinion the 4K Bolt LT is the best wireless video system Teradek has come out with.
@Kats072307
3 жыл бұрын
Do you know if out there exists a solution where one transmitter, can transmit signal to multiple receivers ?
@FilmmakerSurvival
3 жыл бұрын
Yes! All the Teradek Bolt systems can transmit to multiple receivers at the same time. The Bolt 4K LT can have up to 6 receivers per transmitter.
@rogmag74
3 жыл бұрын
Is it true that the HDMI is 8-bit only? That's a bit of a downer that the only way to transfer 4K on this setup is to downsample to 8-bit which will likely cause banding. Edit: Seems like their technical specifications page is incorrect when it says HDMI: 8-bit. In the manual (for the non-LT, the only one I could find) they specify several more options for HDMI, including 10-bit.
@FilmmakerSurvival
3 жыл бұрын
From my understanding the 4k is still 10 bit 422.
@rogmag74
3 жыл бұрын
Yeah, I think the specification page is just incorrect. By the way, nice to see they added LUT support for the Bolt 4K LT in the firmware released a few days ago.
@FilmmakerSurvival
3 жыл бұрын
I didn't realize! I'll have to do an update video. Thanks for letting me know.
@NatyimKhrach
Жыл бұрын
How about Image Quality with Bolt 4K? Thank you
@johrman04
7 ай бұрын
It’s great! You gotta be in range and have a good signal but it’s great. As a commercial dit it’s my go to transmission system
@cah88
3 жыл бұрын
Why would the wireless TX/RX system need luts? You should be using a professional monitor with that technology already built in.
@FilmmakerSurvival
3 жыл бұрын
Yes, while professional monitors and cameras do allow custom LUTs to be loaded, not all lower end monitors and cameras do. There are also other times it can be helpful. A prime example would be this...Years ago I worked on a television show and production didn't want to pay for the DIT to live color grade with his color box. So what we did was have the DP and DIT create LUTs for our different sets during prep. We easily had 8+ monitors on set. Instead of going to every monitor and loading the LUTs and changing them for every scene or set, we loaded them onto the 2 Teredek receivers and whenever we needed to change it we just switched it in the teredak and instantly all monitors on set had the correct LUT for the scene. Having it as a feature can be a lifesaver when you can't have all the stuff.
@cah88
3 жыл бұрын
@@FilmmakerSurvival great example. Thank you.
@senogamoses5319
3 жыл бұрын
What cart is that ?
@FilmmakerSurvival
3 жыл бұрын
It's a Backstage TR-04. I did a video about it. Check it out! kzitem.info/news/bejne/0qannmdpZqd8Z44
@lerocine
2 жыл бұрын
Vaxis Storm is better... El Vaxis Storm es mil veces mejor
Пікірлер: 55