Really appreciate your videos, I’m just a tinker talking to you from Central Florida
@Woodysworksaws
2 ай бұрын
I am loving these new echos! I am always super surprised at what the factory squish is. They really open up when ported though it’s amazing how much power can be gained on them
@batmantiss
3 ай бұрын
Those echo's are a monster to start when theyre brandy-new dry saws
@yenerm114
3 ай бұрын
👌🏻🤘🏼🤘🏼
@kbittorf335
3 ай бұрын
The Egan pipe really woke my 2511 up. It‘s not any louder than a modified muffler.
@carnold.knowledge
3 ай бұрын
Hey Richard, I would love to see you do a video on tuning a chainsaw carb. I haven't found a single video that explains all 3 adjustments properly. I get what the high adjustment does, I get what the idle adjustment does. But how does the low factor in? And tuning in the cut is tricky. Or do you just tune the high with an RPM meter and call it a day? You could be of great help.
@Lauterbach24
3 ай бұрын
A pretty good video on what low does. kzitem.info/news/bejne/1YJ63JiZiaR0Z4Isi=g3SECZfqBC46SB9S
@Mastr-Tech
3 ай бұрын
You need to learn how to search for video better. There are so many videos out there.
@skater4life31683
3 ай бұрын
You should also look at "vintage engine repairs" video about the official Stihl carb adjustment method. There is also another video with a large 3d printed carb that shows you how it works also. I can't remember the name of it.
@TroyMencke
3 ай бұрын
Hey Richard boy they are just a little hand full once you get to the motor it's self. You should have been a mechanics teacher would have did better in school 😊
@Mike_Mike_0
3 ай бұрын
Rich those are nice little buggers. 😊😊😊😊
@aaronpowell4885
3 ай бұрын
Would've loved to see the before. Great job👍🏻 hopefully it's owner takes a little better care of it now🤞🏻
@aaronpowell4885
3 ай бұрын
Yeah, tuning can be a touchy subject. After years, I'm confident and comfortable in my 2t and conventional 4 stroke tuning abilities. 4-mix had me at first as I was a little nervous to actually tune it like a 4 stroke!
@gradycothran3896
3 ай бұрын
Socar to the rescue!!!!!
@REDLINERUNNER
3 ай бұрын
Why don't you use tacho to adjust??
@thomaslindroos1667
3 ай бұрын
Rpm is technically irrelevant, and even more so on a ported saw since they take higher rpms
@REDLINERUNNER
3 ай бұрын
@@thomaslindroos1667 I keep my Stihl stock and on factory set carburettor... They run forever with JASO FD MIX 2%
@quebird3108
3 ай бұрын
My 2511 was so rich it was pushing oil out the muffler. Dealer said it should be right. They did say I could adjust within the range of the limiters without hurting the warranty. I only did a little and it helped, but if i was braver, I think it would help more.
@REDLINERUNNER
3 ай бұрын
See what junk Echo is? They can't even adjust carburettor..
@richardflagg3084
3 ай бұрын
@@REDLINERUNNER It's not just Echo sending units out the door without properly tuning them. On the other hand, this could have been bought online? I'll have to ask him when he picks it up.
@quebird3108
3 ай бұрын
@@REDLINERUNNER I don't think Echo is junk at all. It's a great saw and I would buy it again. I don't mind the initial rich setting for a break-in, but I think the dealers should do an adjustment once for no charge when if the customer brings it in after a break-in.
@REDLINERUNNER
3 ай бұрын
@@richardflagg3084 All my 3 Stihl machines came PERFECTLY tuned from factory... MS230 (2005), MS311 (bought last year), FS120 (2016) and as I use Castrol POWER1 Racing 2T and MIX it 2% my machines run perfectly, absolutely no smoke at all and spark plugs are light grey. Somebody would read these plugs as running too hot, but deffinetley not. All my machines run perfect and all of them can be lifted by starter rope hot or cold...
@REDLINERUNNER
3 ай бұрын
@@quebird3108 Stihl gets 100% perfectly adjudted from the box..
@REDLINERUNNER
3 ай бұрын
Both Echo and the owner are JUNK!!
@carnold.knowledge
3 ай бұрын
I'd say YOU are JUNK if you can't articulate why...
@Okinawa1914
3 ай бұрын
ECHO best cheinsaw nb1 made in japan...Sthil,huswarna,makita,dolmar,jonsored,mckullow 👎👎👎
@REDLINERUNNER
3 ай бұрын
@@Okinawa1914 Echo looks like someone's back yard project. Andreas Stihl invented single man operated chainsaw and leading in inventions and quality. Husqvarna is No2, Partner used to be amazing untill mid 80'es when Puolan bought it... Echo, never heard untill two years ago..
@Okinawa1914
3 ай бұрын
@@REDLINERUNNER echo Cs 7310sx aj hew cheinsaw 👌 super
@REDLINERUNNER
3 ай бұрын
@@Okinawa1914 You call that powerful??? Even MS461 is stronger and Stihl has much much stronger saws. The most powerful production saw is MS881 which Echo can only dream about..
Пікірлер: 36