Super, ce tuto m'a permis de ressusciter mon FIMI. Merci
@theohallenius8882
Жыл бұрын
I just did it, works perfectly with a new battery! Thanks!
@jlmorencia
Жыл бұрын
Thanks for this. My palm is still alive...this battery is far away better than original...at least doesn´t burn when charging !!!🙌🙌🙌
@darknemesis666999
Жыл бұрын
Thanks a lot the batteries are rly easy to fing now thumbs up
@Sam-bh7vn
Жыл бұрын
Thanks man. I changed my battery with your video
@MoustacheColomb
2 жыл бұрын
Thanks for this very useful video, I was desapointed when my shop explained me that it could be better to purchase a new one. I have just change the battery following your tutorial and now, my Fimi is working well!
Thanks for the video. After leaving my Fimi Palm in the drawer for about two years, I found it got the same problem of flashing green light you described here. It initially also had the issue of being unable to hold the charge for several days. Hope replacing the battery will solve that issue as well...
@valleynomad
Жыл бұрын
It is hard to unplug the battery connector as it was not really designed to be reused. It may be easier just to re-solder those wires to the replacement battery.
@MrEye4get
11 ай бұрын
Exceptionally difficult to connect the new battery.
@charlescleary5446
Жыл бұрын
Thank you so much, just what I needed, ordered replacement battery from AliExpress today 👍
@andrewfaulkner1971
Жыл бұрын
No problem 👍
@PrestonGlidden
Жыл бұрын
Thanks. This was very helpful. My camera works again!
@15Rintsie
Жыл бұрын
Thx for the video, really helped!!
@MarcelVanderWerf
2 жыл бұрын
Great info! Thanks! Ordered the replacement battery and tried to switch batterie immediately. Unfortunately, my connector broke when Trying to remove the silicone kit from the connector. Broke one of the pins on the board 🙈 I will try and solder the wires directly in the board now. Hope to get it up and running again. Anyway, if it fails, I at least tried.
@markusz1956
Жыл бұрын
So bad! I have the same problem! Did you find a solution back then?
Жыл бұрын
@@markusz1956 I highly doubt it. Went through the same thing, fucked it up
@ingridmelo2615
2 жыл бұрын
Funcionou certinho, consegui trocar a bateria.... Muito obrigada
@andrewfaulkner1971
2 жыл бұрын
Fantástico
2 жыл бұрын
Hey, Thanks, very useful my Fimi is working again 🙏
@flyingfeline7110
Жыл бұрын
So glad to find this! Thanks
@caramonchan3464
2 жыл бұрын
You save my FIMI's day
@iforce2d
2 жыл бұрын
There seem to be a lot of battery problems with these. I bought one last year and was surprised and disappointed to find it not at storage charge right out of the box - it was dead flat, bad news for lithium chemistry. I managed to charge it and get a couple hours usage, after which it was basically good for nothing.
@influenist
2 жыл бұрын
My PALM almost exploded in the hotel. Never really used it as I have a DJI before, tried to charge it yet was not able to boot with blinking led, left to charge it as this is needed sometimes to have minimum charge after full discharge. Yet when I got back it the room it caught much heat and popped of the battery housing like shown in the movie. Guess I was in time as the battery started to swollen and directly cooled it down with cool air from the föhn.
@doosworld1901
2 жыл бұрын
Wow I just had a similar issue. Was charging and blinking, heard a cracking noise it was the battery swelling and pushing the back cover off the unit. Just ordered a replacement. I'm hoping this will allow the unit to charge properly and power up.
@Mr24gargamel
Жыл бұрын
Merci merci vous avez sauvez ma fimi 😊
@ChanCongMinh
2 жыл бұрын
great man, thank so much
2 жыл бұрын
Merci. Vidéo parfaite.
@aureliencnt6471
2 жыл бұрын
This is exactly what i need
@darknewt1634
Жыл бұрын
Hiya, is there a particular replacement battery you recommend? or seller ? thanks for the video by the way!!
2 жыл бұрын
Thank you friend ! I almost put my cam at trash....
@doosworld1901
2 жыл бұрын
What were the symptoms? Did the unit not even turn on with the dead battery? Mine was a brand new unit (new old stock) and the battery was charging for the first time for about 5 minutes and started swelling. Charging light was working and flashing at the time. When I noticed the swelling I unplugged and now I put in a cool place. If I try to turn the cam on nothing happens with the defective battery. I'm hoping the replacement will solve my issues after installing.
2 жыл бұрын
@@doosworld1901The symptom is : Green light flash durant charging procedure attempt, but battery dont charge , and consequently fimi cam dont turn on . I waiting baterry unit replacement that is coming from China. Here in my country these batteries are not sold. It was hard to find ....
@doosworld1901
2 жыл бұрын
Really appreciate this video! Just purchased a new/old stock Fimi Palm, and just opened it tonight. Went to charge up and the battery starting swelling within 10 minutes, using the correct charger and all. I'm guessing it sat too long without any power being used and went bad. I just ordered the replacement you linked in the comments. My question is...if the battery is defective would the unit just not power on? Mine is not powering ok with the swollen/defective battery and just hoping the replacement from Ali will allow the unit to power up. It is brand new otherwise so I assume it will? Thanks!
@andrewfaulkner1971
2 жыл бұрын
I would think its just the battery. From what I can make out its two 3.6v cells they then use balance charging too recharge them individually making sure one cell is not reverse charging the other. But then I think the issue is the way its built its possible the unit is leaching power from just one cell to hold up clock settings and such like.
@doosworld1901
2 жыл бұрын
@@andrewfaulkner1971 Thanks kindly. So when the new one comes in I'll follow your advice. I've yet to see the unit power up so fingers crossed I replace and it powers up and woks! Thanks again.
@venesio782
2 жыл бұрын
I have really appreciated your tutorial. Where did you buy the replacement battery?
@andrewfaulkner1971
2 жыл бұрын
www.aliexpress.com/item/1005002502670033.html
@casenlemafe1375
Жыл бұрын
thank you
@wasabipet67
Жыл бұрын
after replace battery , can solve hot problem?
@bushidoconectorgustavooliveira
4 ай бұрын
Obrigado ajudou muito tenho as 3 versões a bateria do meu Palm2 que esta ruim mandei um email para Fimi ver se eles tem a bateria de reposição da versão palm 2. pergunta será que a Bateria do Palm 1 é igual ao do Palm 2? você sabe me dizer? mesmo assim Obrigado.
@andrewfaulkner1971
4 ай бұрын
The Fimi 2 battery seems to be different, and I can not find a part number for it anywhere
@BeyondWrittenWords
9 күн бұрын
That connector is impossible to reconnect reliably! Don't even open the metal middle plate. Leave the old connector as it is and just solder the 4 wires (yellow, black, white, red) to the new battery.
@nickl1177
2 жыл бұрын
thanks
@tomtomclub2005
2 жыл бұрын
recharged mine after not using it for almost a year. It was getting very hot while charging and had the right light when trying to turn on after a 45 min charge. Let it cool and recharged with laptop at less power. Still got hot. discharges extremely rapidly like 50% in 5 min . I ordered one of the battery packs. Hope it will fix the problem otherwise major loss of money for something i have used maybe 15 min in total
@tomtomclub2005
2 жыл бұрын
Thanks for video BTW.
@darknewt1634
Жыл бұрын
Hi how did you get on? I have exactly the same issue, now ordered a battery!
@tomtomclub2005
Жыл бұрын
@@darknewt1634 I've replaced the battery, you do need a small xacto or razor blade to cut the dab of silicone on the battery connector and release it. Charges fine now, only problem is now Gimbal and camera are not working anymore. Gimbal does not move at all. I can view videos already taken. As you can imagine i am really p***d off for such a waste of time and money. Camera has not seen any abuse nor drops before. I will reopen just to double check but have very little hopes to resurrect it. Hope you will have better luck!
@darknewt1634
Жыл бұрын
@@tomtomclub2005 thanks tom, I have ordered a replacement battery but not an OEM one it is quoted as being 1500 mah and compatible so fingers crossed that it does the trick. Just a suggestion have you tried putting on the latest firmware? if you have your old battery is it worth seeing if that brings the gimbal to life even for the short time it works? just in case its a compatability/broken wire issue (I have read a few people have disturbed the wiring/soldering on the motherboard connector have had issues.
@felixferreira888
2 ай бұрын
HI I would like to know where I can purchase the battery I have sent an email to their support and they reply they cannot support to my issue.. Really a hoplesss company
@aureliencnt6471
3 ай бұрын
I replaced the battery but still have the same problem
@alvin9020
Жыл бұрын
Where to get a new battery? What kind of battery is it?
@andrewfaulkner1971
Жыл бұрын
See updates on KZitem page
@annaprola4769
2 жыл бұрын
Grazieeee
@dennispronk6403
2 жыл бұрын
A diode between the battery and the connector maybe a solution for discharge?
@andrewfaulkner1971
2 жыл бұрын
.5 volt drop across the diode and change needs to flow both ways for a li-po to function.
@andreylorekarla
10 ай бұрын
❤
@dj.nepaliladki6224
4 ай бұрын
Hello, what's the batter name size?? Mine is dead, I haven't turned this on for like 3 years, and now it's just flashing green light after charging it for a day! PLEASE HELP
@andrewfaulkner1971
4 ай бұрын
BATTERY PART No GH3DC01FM www.fusionbattery.co.uk/products/battery-for-xiaomi-fimi-palm-gh3dc01fm-7-4v-li-polymer-800mah-5-92wh-cs-muf301mc OR www.aliexpress.com/w/wholesale-GH3DC01FM.html?spm=a2g0o.home.search.0
@dj.nepaliladki6224
4 ай бұрын
Thank you!
@dj.nepaliladki6224
4 ай бұрын
I was able to replace it today, and I wanted to come back and thank you once again! It’s alive 😅🙏🏽
@mgnvision
2 жыл бұрын
where did you buy it, do you have a link? thanks.
@andrewfaulkner1971
2 жыл бұрын
The camera was from Banggood, the Mk1 is now very good price. The replacement battery came from eBay, I can not find any on line at the moment though. www.banggood.com/FIMI-PALM-Pocket-Gimbal-Camera-4K-100Mbps-HD-128-Degree-Wide-Angle-3-Axis-Handheld-Stabilizer-Anti-Shake-Support-WiFi-Bluetooth-Smart-Tracking-p-1617426.html?cur_warehouse=UK&rmmds=search
@Csabancs
2 жыл бұрын
Search for the modell number of the battery: GH3DC01FM
@andrewfaulkner1971
2 жыл бұрын
www.aliexpress.com/item/1005002502670033.html
@wasabipet67
2 жыл бұрын
I had just bough a new battery to change. Great video! THX
@andrewfaulkner1971
2 жыл бұрын
@@wasabipet67 Glad it was of help to you. Just remember to keep it charged and it shouldn't kill a cell again.
@sebasenior2810
2 жыл бұрын
Hi, thank you so much for the explanation, can you please provide the link where to buy the battery? thxxxx
I need to replace my battery too. But AliExpress couldn't send battery to my country. Could i replace the battery with any 2 cell li-ion battery or with fimi palm2 battery? Will it work?
@andrewfaulkner1971
2 жыл бұрын
I would only use the correct battery, there are some components on a small PCB in the Fimi battery. Try searching the battery part number on Bangood of poss eBay in your home country. Hope this is of some help.
@ejapratomo4481
2 жыл бұрын
Ok, I'll try to find the battery then. Wish me luck man
@akhmadkai2189
2 жыл бұрын
Hi, can it run without battery, and with only using 5v USB c port?
@andrewfaulkner1971
2 жыл бұрын
Never tried it, post your results it it works.
@kristianaleksandrov9757
2 жыл бұрын
I just replaced my battery and tried what you have asked but unfortunately the answer is no - it can't run without a battery with only 5v on the usb-c port.
@akhmadkai2189
2 жыл бұрын
@@kristianaleksandrov9757 thanks for confirming
@MilkyWayShoots
2 жыл бұрын
is it possible to provide me the purchase link? my one died!
Onde compro essa bateria? Where do I buy this battery?
@andrewfaulkner1971
2 жыл бұрын
www.aliexpress.com/item/1005002502670033.html
@TheRomulopaula
2 жыл бұрын
Obrigado / thanks
@meathippie9322
2 жыл бұрын
Doesn't the new battery get broken as well? Thinking about doing it, but if it is an internal problem then it will probably come back even with the new battery?
@andrewfaulkner1971
2 жыл бұрын
The issue is if the camera is left to deep discharge, just remember to charge it every 6 to 8 weeks even if you haven't used it.
Жыл бұрын
Your video makes it look too easy, and probably it was. But the adhesive in my camera was a nightmare to take off, as others have reported, not at all like in your video. This camera was not built for this at all. I broke one of the pins (which are extremely flimsy), tried to solder it and broke it even more in the process.I still think it could be recovered but quite honestly I'm sick of it, and more sick of Fimi. Fimi makes seemingly quality products that get no support, don't last and are ultimately bullshit. None of the products I have bought from them have turned out right, so my recommendation is don't buy anything from that crappy company.
@andrewfaulkner1971
Жыл бұрын
UK Supplier www.fusionbattery.co.uk/products/battery-for-xiaomi-fimi-palm-gh3dc01fm-7-4v-li-polymer-800mah-5-92wh-cs-muf301mc
Пікірлер: 97