This is the best explanation of this on the internet. Thanks so much
@staytuned3068
27 күн бұрын
Thanks!
@prestonashworthmusic
6 ай бұрын
Behringer really struggled to take the angle of the user when they wrote the manual... I love that you focused on CC number programming as 98% of the folks that would use this are going to use it exactly as such. Good on you for taking the time to make this!
@staytuned3068
6 ай бұрын
That's so true about the manual, thanks!
@litelsnek
Күн бұрын
Concise and easy to understand. Amazing video!
@MuffinMachine
9 ай бұрын
I've had this thing for two years and gave up trying to program it to do anything but be expression pedals. The manual can show you how but if you don't know WHAT to do it doesn't matter if you know how. Thank your for this!
@simgear4131
Жыл бұрын
YOU ROCK! Thanks to your tutorial, I have been able to configure my new board to control REAPER on LINUX. I would have been LOST because the quickstart guide which came with the FCB1010 does not tell you a thing about setting this up. Thank you for taking the time to make this video.
@staytuned3068
Жыл бұрын
Glad you found it helpful!
@PhilRossiMedia
10 ай бұрын
You should get a Nobel prize for this,.
@staytuned3068
10 ай бұрын
Haha thanks
@ke4uyp
8 ай бұрын
I have a quick question. Would it be possible to control both my behringer amplifier and my new boss VE500. Could I put the amplifier on bank one and the VE500 on bank 2? using a split midi cable
@ke4uyp
8 ай бұрын
After thinking about it for a moment it would be impossible to do it with a split cable but an AB switch box for MIDI. You could have A switch position for the amplifier. Then when switching to B, it would disconnect the path to the amplifier and only connect it to the VE500 and then you could choose whatever bank and or memory position you wanted for each one. I may have answered my own question?
@staytuned3068
8 ай бұрын
@@ke4uyp If my understanding is correct, as long as both the ve500 and amp are programmed to receive different midi values you should be able to use them with a split cable? As long as its outputting signal to both devices.
@scotthfrey
4 ай бұрын
seriously.
@ChasingRainbows1979
Жыл бұрын
I very much Liked and subscribed. I got this pedalboard around 6 years ago and promptly gave up on it and it has since been gathering dust in a cupboard. There simply isn't enough information on this thing anywhere.. ..until now when I stumbled across this video. thank you so much for taking the time to explain this. very much appreciated
@staytuned3068
Жыл бұрын
Thank you so much! I’m glad to hear it’s getting use now and I could help :)
@adamweisman7149
Жыл бұрын
Thank you so much. I looked at three other videos, but it wasn't until yours that I could get the FCB1010 working. I only have to hook it up with pure data on the laptop. Thanks again.
@staytuned3068
Жыл бұрын
No worries! Happy it worked for you!
@ianpritchard6375
7 ай бұрын
Really enjoyed your video .. and the comments from viewers. I thought I was losing the plot as I struggled to do even basic edits. This helps A LOT! Thank you.
@staytuned3068
7 ай бұрын
Thank YOU!
@donaldfrederick2603
Жыл бұрын
You're video is ABC easy my friend! Kudos to you! I have finally mastered this damn board lol. Saved my quite a bit of heartache.
@staytuned3068
Жыл бұрын
Thanks! I’m glad you found it handy :)
@patrickigiraneza2947
Жыл бұрын
Thank you very much for this tutorial. It saved a lot of time and a lot of confusion.
@staytuned3068
Жыл бұрын
No worries, glad to help!
@tonymathers7931
5 ай бұрын
thanks for the video.. helped so much in setting my expression pedals to work with ableton. Great work
@staytuned3068
5 ай бұрын
No worries at all glad to help
@GypsyRose2030
Жыл бұрын
Now I just have to program the FCB 1010. I have ADD so it might take me a while but yes thank you for the great video!
@staytuned3068
Жыл бұрын
Thanks, I wish you luck!
@JonDeth
4 ай бұрын
I had one of these and had some success programming it, but overall, it couldn't access a lot of my gear's features I wanted it for even though it was for the Behringer Virtualizer Pro 2024. *Fortunately, I don't really use modulation and time-based depth effects, and the new breed of floor processors often have midi controllers built into them.* I'm sure if I were running plugins on a PC with it, then it would be a beast of a unit. *There are, however, custom EPROMS you can buy for it that are specific to guitar gear, rack processors etc.* The guy I sold it to installed EPROMS programmed specifically for the Behringer Bass V-Amp, so you dropped it in, plugged it in and everything was custom tailored. Programming it for my gear hit a lot of dead ends, but I did get a fair bit of control out of it, just far from what anyone would expect.
@ericnenin5205
Жыл бұрын
thank you very much ! i am a belgian fan guitar and i use Mainstage. FCB 1010 was really hard to understand. Your video save my life !!!! Happy 2023 ;-)
@staytuned3068
Жыл бұрын
Yeah it’s pretty complicated, I’m glad I could help! Happy 2023 to you too! :)
@dimitrivanlieshout1615
8 ай бұрын
thanks for this video , i almost send it back ... now it works !
@staytuned3068
8 ай бұрын
Awesome to hear! Thanks
@umpolpip4619
3 ай бұрын
I ran into your lesson because I want to control Line-6 POD HD500X. It needs to select 8 main groups by PC or manual. Each group has 16 basic presets that are arranged in 4 groups 1A, 1B, 1C and 1D then 2A, 2B...all the way to 16C and 16D. Having a group that contains 4 sounds is very practical for each song or style. It has a pair of Up & Down switches also (1-16). The HD500X pedal has a Big Letter View window that show the activated preset. But if there is modification (by PC Editor program or manual buttons) the stupid View window will not return to Big Letter unless I bend down or kneel on the floor to press View twice. It is hard with the guitar on my neck. Also for setting the pedal, it is better to put on a tall rack or desk and adjust while sitting and playing guitar on a chair. Doing so I can't lift my foot or use finger to press the switches. I used FCB-1010 before with my Yamaha DG-80 Amp with out problems because the preset increased consecutively from 00 to 80 (I don't remember). I tried with Line-6 POD HD500X today and was able to activate about 20 presets. But I noticed that many sounds did not came out right. Some configurations changed and later the PC crashed. Please help. Thanks, PS: Please also show the initial conection to PC. Using Midi cable?
@smoothsavage2870
5 ай бұрын
Thanks for making this video. I've been working through their manual and i still found assigning the pedals confusing. There was still one small thing i didnt understand in order to assign CC #s for the pedals.
@zymofficiel
7 ай бұрын
Enfin!!! exactement ce que je recherchai Merci beaucoup
@staytuned3068
7 ай бұрын
Happy I could help!
@sinelanguageclub
3 ай бұрын
incredible video. thank you!
@staytuned3068
3 ай бұрын
Thanks!
@Crabfather
4 ай бұрын
I'm still not getting it. you're assigning CC values, but no CC number ? and whats 6 for?
@ColinLandrum
Жыл бұрын
thank you!
@staytuned3068
Жыл бұрын
No worries!
@rolfjohansen5376
Жыл бұрын
I got 4 years of university education, but met my demise in the FCB1010, however thee are at least one app you can use to program this box, worked for me
@staytuned3068
Жыл бұрын
Yeah it’s a damn challenge haha, I’ve heard the app is great but the only thing is it isn’t free I don’t think
@FPVMgunit13
10 ай бұрын
whats the app....I give up with this aftyer 2 years lol
@bretttrommler756
11 күн бұрын
Okay, so I can follow the procedure well enough. But I am wondering if this device will do what I need it to do. I am told that it will connect to a Boss Katana Mk2, which is what I have. The GA-FC footswitch for the Katana will allow you to turn on and off your various effects groups; Boost, Mod, FX, Delay, etc. But I cannot use it to turn on and off individual effects. If my Mod group is set to the chorus, I can turn that one and off. But I can't switch it to anything else in that group such as a phaser or flanger. Can this be done with the FCB1010? i.e. can one button be programmed to turn the chorus on and off, another to turn the phaser on and off, another to turn the wah expression pedal on and off, and another to turn one of the delays on and off? The problem with the GA-FC footswitch is that the mod effects button can only do the Mod effects group. I can't program another button to do the same group but a different effect. Can I do that with the FCB1010?
@paucosmos9050
3 ай бұрын
My friend I am doing something wrong, can you help me by answerign my question? Why you assigned pedal01 to CC01? Because you want to trigger the command CC1 on a device or a software with pressing the first footpedal? So if I want to trigger the commad labeled CC26 with the first pedal I will press it and programm it by typing n 26 instead of 01? And then programm the values 00 to 127 on 6 and 7 accordingly?
@UntilTheEn86
Жыл бұрын
This was a bitch to setup after countless reddit and youtube videos got it running as a pedal board through neural dsp using the element program. So worth it though
@staytuned3068
Жыл бұрын
Yeah it’s a pain! Glad you finally got it working!
@tomgleason5546
11 ай бұрын
this is crazy. Is there a more modern plug n play version of this type of controller?
@staytuned3068
11 ай бұрын
I know there’s software out there that makes using it a whole lot easier but it does cost money
@tomgleason5546
11 ай бұрын
Thanks I did figure it out eventually. It's not all that crazy after all, but I will probably be using the free fcb1010 Manager software to experiment with more complex configurations.
@kennybrown9077
Жыл бұрын
You need have have both the midi in and midi out? I bought this to use with my nueral dsp plugins and i bought a midi cable with it but i figured you would only need the one cable from the midi out to the midi in on the interface
@staytuned3068
Жыл бұрын
I’d imagine it would work fine with the one, may as well give it a shot!
@jcarh
Жыл бұрын
When is Behringer gonna update this controller out of the 90s. It looks like my PODxt Live.
@mickthemerciless9694
3 ай бұрын
Would it be possible to use the unit as a midi bass pedal, instead of a real one.
@staytuned3068
2 ай бұрын
Hi yeah definitely as long as you have midi bass software
@kisho2679
2 ай бұрын
How can bank change be achieved?
@mardtyni
20 күн бұрын
Great tutorial! I did everything like you showed but have a problem, for example: I've mapped first button to change my amp (clean/dirty) and second to turn on and off the delay pedal. When I turn on the delay and I want to switch my amp I have to double tap the first button to do that. Then when I want to turn off the delay, I again have to double tap the second button. Of course I want it to do that on the first tap. Can you pleaaase help me with this my savior?
@mardtyni
17 күн бұрын
Edit: I found guys discussing this on a forum and shared a link for solution but the link is no longer working :( they are talking about "change the type to alternating value and change the cc# value to a single value" but I don't understand :/
@gregaucoin3585
10 ай бұрын
Ive tried to follow these instructions and do it exactly as you describe but it doesn't do what yours does. Pedal one only does 00 doesn’t do 127
@ericyoung656
Жыл бұрын
Do the expression pedals have to correspond to a specific pedal, or can you set them up to be independent of the peddles. I am in the process of purchasing one so I have not sat down in front of it yet so I am sorry if this is a dumb question.
@staytuned3068
Жыл бұрын
Not a dumb question at all! They are specific to each pedal but you can make them independent but you have to go through each pedal. Hope that makes sense.
@johnnymaniscalco5228
Жыл бұрын
I bought this for my digital Alesis Strike Pro SE drum set. I have the drum brain set for midi channel 2. Alesis says cc 118 and 119 will go forward and back through the drum kits. How do I get the 1010 to see midi channel 2 and 118 and 119? I would like 118 on one pedal and 119 on a different pedal. Thanks.
@wikstroms
Жыл бұрын
I have FCB1010. I don´t want to have programchange. Only snippets on our BehringerX32 mixer and this is midi channel 2 on the mixer. Can you make a simple film about this configuration. Snippets on the mixer is 00, 01, 02, 03, 04, 05, 06 and so on
@HarryTruman1952
Жыл бұрын
Earlier versions you had to physically change the chip in the unit Can you update the firmware with USB cable? Thanks for the video
@staytuned3068
Жыл бұрын
Hi, unfortunately the only way to update the firmware is through a new chip. They don’t make it easy!
@hannesobrist2160
10 ай бұрын
QUESTION, I got everything working now bud EXP2 does have a diffrent velocety curver then EXP1 , Like if I push exp 1 Frome heel to toe it goeas seemlesly from 0-127 bud if i do it with EXP2 nothing happens till I am at halfway, and from there on it transissions from 0-127. As ifthe previous owner had manupulated something to make it more sensitive. I dont think it is meant to be that way.. Has someone a IDEA??
@warwick724
8 ай бұрын
Any idea how to assign a volume and was for dip with a Mac ?? every time I active the way and step on the pedal it shuts the way off and takes me to another preset ?!?!?! ready to chuck this thing out the window!! any help would be great!
@staytuned3068
8 ай бұрын
Hm it sounds like the wah is assigned to the wrong midi number? Did you get to do the steps exactly how they are in the video? Also can you remove the midi link that triggers the preset it keeps taking you to?
@mateo4424
9 ай бұрын
Thanks man, your video helped a ton. Now for whatever reason after I had it all set up the way I wanted and everything was working...It just stopped. Ive got no reason as to why. Ive factory reset a dozen times now and followed your vid to the T. Everything says it should work like it did but it wont. I'm using it with neural dsp stuff through ableton. Maybe you have some insight I dont?
@staytuned3068
9 ай бұрын
Hm that’s weird. I’m wondering if it’s something to do with the software itself? Like maybe a midi setting?
@mateo4424
9 ай бұрын
well it was definitely ableton. it worked just fine on the standalone version of archetype gojira, so i reinstalled ableton and now it works just fine again. thanks for your response too!@@staytuned3068
@alexandersmyth7461
Жыл бұрын
Hi i am trying to connect the FCB1010 to my roland stage piano do i have to have both the midi in and the midi out connected. Also my select green light i can't get it to flash. Stewart
@staytuned3068
Жыл бұрын
Hi Stewart, I’d connect both in and out, also is the green light coming on when you hold the down button down?
@kennitrochrome6093
Жыл бұрын
Will this board change midi channels?
@staytuned3068
Жыл бұрын
Hi yes it will!
@IwanCumi
Жыл бұрын
I just followed each step carefully but my FCB1010 cannot respond like that. I got frustrated 😢
@staytuned3068
Жыл бұрын
Hm strange, it can be a pain! Maybe try resetting it again and going over the steps again? I wish you luck!
@IwanCumi
Жыл бұрын
@@staytuned3068 yeahh. I’ve reset it and tried many times but failed. Especially when going to step where switch number 6 should blink
@staytuned3068
Жыл бұрын
That’s weird, maybe it’s an issue with the unit?
@rodgerwebb1
Жыл бұрын
I followed the video step by step. Not working? I just want to change presets in Guitar riig 6 pro. I've been trying for 5 months now. It shows up in the preferences in Ableton. But dose nothing....
@staytuned3068
Жыл бұрын
That’s no good. How are you mapping the midi to the parameters you want to control?
@MotownGuitarJoe
Ай бұрын
Pretty sure the good folks at Behringer are responsible for the tax code😂😂😂😂
@miguela.migallon5055
Жыл бұрын
Does this midi work with mac m1? There are a lot of problems with midi and mac m1
@staytuned3068
Жыл бұрын
I’ve heard about the issues but I can’t confirm if it will work, most likely it’ll be a software issue that’ll be fixed with updates.
@rockerjadul
Жыл бұрын
How many midi cables need?i have a bossgt8 and wanna starting to pair with fcb1010 before i begin to use a digital application ..please telle how to mak it
@staytuned3068
Жыл бұрын
Hi, i just use 2 5-pin midi cables, one for midi in one for midi out. Hope this helped!
@rockerjadul
Жыл бұрын
I have patches on my gt8, how to make copies of them in fcb1010??
@staytuned3068
Жыл бұрын
You have to copy the patches on ur DAW, so if you have a distortion pedal on your boss, you need to add a similar one on your DAW and follow the video to control it with the FCB1010.
@baddrom
Жыл бұрын
Will it be possible to make a midi tutorial with the FCB 1010 and the Boss GT 1000 Core thank you
@staytuned3068
Жыл бұрын
Hi, I’m looking into eventually getting one so possibly! It might take a while though.
@baddrom
Жыл бұрын
@@staytuned3068 Hello, thank you it would be really super nice because I try for 6 months without result.
@yago8672
9 ай бұрын
Super ideia!@@staytuned3068
@graylingfisher
Жыл бұрын
I have a slight problem with my expressionpedal settings. At the first try I only got it working on switch number 8 (and9), and second time I set it to no number 41 and now It doesen,t work at all. For history I have 40 settings ready and working against My DMXGo app 40 presets in the app working perfect but I the last thing I want is to be able dim my light with the expressionpedal. To control it where ever I am on the preset settings....do I have to get in to global config to separate the pedal from the switches?
@staytuned3068
Жыл бұрын
Hi, hmm interesting… did you go through and set the pedals up for each other bank? Like go onto pedal 1 and set it up, then pedal 2, ect?
@graylingfisher
Жыл бұрын
Truly I had restart the unit can it be wrong config for the expressionpedal?
@graylingfisher
Жыл бұрын
@@staytuned3068Follow your video only change the cc to 56 as needed for dimmer function on mydmxgo, than the expressionpedal work´s on bank 00 switch 1, no other.
@graylingfisher
Жыл бұрын
Now I get hang of it, I have to config all the switches 1 to 40 to make the dimmer working on all channels. Thank´s for a great video and support...
@graylingfisher
Жыл бұрын
@@staytuned3068 That's the way thank´s a lot.
@gregaucoin3585
10 ай бұрын
I'm so frustrated with this I'm getting 26 when you get 00
@staytuned3068
10 ай бұрын
Hm strange, maybe try using the expression pedals to select the cc value instead of the numbered buttons?
@Rav3nghast
6 ай бұрын
I would literally pay for someone to give the same instructions for controlling Helix Native in Logic Pro 😢
@andersonformaggini
11 ай бұрын
@staytuned3068 Hello. I wanna know if I could hire you to take this from the very start and teach me how to make it work... controlling a keyboard or a VST, please? Let me know here so we can talk about it.
@johndoremi3872
Жыл бұрын
"Finally", but its late for me , i dont have it anymore :(
@staytuned3068
Жыл бұрын
Aww man :(
@escalonae
8 ай бұрын
could this stupid pedalboard possibly be any more complicated? (and yes, you're awesome, man, thank you so much)
@staytuned3068
8 ай бұрын
Haha no worries, yeah it’s ridiculous!
@Matt_bechillin
Жыл бұрын
You didn’t hear all the white noise ? 👀 dude fix it care about your work.
@DirtbagDime
Жыл бұрын
OK Karen
@Matt_bechillin
Жыл бұрын
@@DirtbagDime …….? Stop overusing Karen you’re watering it down
@zolwikwkurwik
6 ай бұрын
Can you assign different values to CC other that on/off (127/0). Like #CC 42, value 5?
@wikstroms
Жыл бұрын
I have FCB1010. I don´t want to have programchange. Only snippets on our X32 mixer and this is midi channel 2 on the mixer. Can you make a simple film about this configuration. Snippets on the mixer is 00, 01, 02, 03, 04, 05, 06 and so on
@hannesobrist2160
10 ай бұрын
QUESTION, I got everything working now bud EXP2 does have a diffrent velocety curver then EXP1 , Like if I push exp 1 Frome heel to toe it goeas seemlesly from 0-127 bud if i do it with EXP2 nothing happens till I am at halfway, and from there on it transissions from 0-127. As ifthe previous owner had manupulated something to make it more sensitive. I dont think it is meant to be that way.. Has someone a IDEA??
@staytuned3068
10 ай бұрын
That’s weird, if worst comes to worst you might have to reset it.
@hannesobrist2160
10 ай бұрын
@@staytuned3068 im not sure. Cause when i got it, it was the KemperFrirmware chip inside, then i got a new fresh chip, 2.5, i think. Bud i can still try to reset. Looks like someone choose to have a diffrent velocity curve.
Пікірлер: 116