I can’t wait until this is done so I can have my garage back! Love mom♥️
@joerahman1
4 жыл бұрын
Annette Mastracci Lol
@teopolitis
5 жыл бұрын
The fact that you have bought a machine dedicated to cleaning the underside of the car just makes me love you so much more
@Razhyx
5 жыл бұрын
Underrated series. Thank you Milan !
@johnmatthew9306
5 жыл бұрын
Awesome job man!!! I just got an 07 Mini Cooper base model with 84000k. I’m in love with it!!! So much fun to drive and amazing fuel economy! The sport mode is boss!!! I think I need to do some basic things to it like give it a proper tune up and what not! Nice video man can’t wait to see more love your mini! Mines mellow yellow!
@milanmastracci
5 жыл бұрын
Hey John! Congrats on the purchase. Even though the base model does not have the same amount of power as the S/JCW, they're still a ton of fun to drive!! :)
@aazt5792
5 жыл бұрын
finaly brother i was waiting for a long time , you are awesome keep teaching us the good things and thank you bro
@christophersingh1834
5 жыл бұрын
It's looking good so far
@Yoogoy
5 жыл бұрын
6:57 coffee cup lid 😁
@Champ0204
5 жыл бұрын
Please change up the music
@thetraindriver01
5 жыл бұрын
A great choice I thought 👍
@Champ0204
5 жыл бұрын
thetraindriver01 repetitive
@coolissimo69
5 жыл бұрын
Finally Milan, a new video. welcome back.
@alexvargas8222
5 жыл бұрын
Looks great!
@xtina818
5 жыл бұрын
What year is the Mini? The cosmoline (anti rust from the factory) is still doing its job well. Even though it turned a yellow brown.
@milanmastracci
5 жыл бұрын
This is a 2009 with 124k km's on the body. Yeah it surprisingly has held up rather well. Its too bad the subframes aren't given the same treatment, but oh well..
@GreyMatterStew
5 жыл бұрын
Is that Milan or Merlin? Work your magic, you little Canadian wizard.
@Almightyrastus
5 жыл бұрын
God, that music was some repetitive shite... Good job though.
@gedas3419
5 жыл бұрын
It's not annoying or something, but this beat is overused by youtube
@527ascotte
5 жыл бұрын
Looking good, you should undercoat the Mini while you have is this way!
@AliA-jr3iv
5 жыл бұрын
Awesome bro
@milanmastracci
5 жыл бұрын
Thanks Ali!! 🙌
@thetraindriver01
5 жыл бұрын
Great effort Milan, that bay looked good, a pitty about the sealant marks, they look like they will not come off... I bet that killed you to leave them lol. really happy for you to see the mini finally taking shape, it’s been a long time coming for sure 👍 keep up the great work, looking forward to seeing the next vid 👍👍👍😜👍 still loving the outtro, a signature Milan outtro now 👍👍👍👍👍
@markmorris8118
5 жыл бұрын
My is up and running and the big cams made a huge difference with mine surprised you didn’t go that route .
@sergiourquijo4000
5 жыл бұрын
Oh man it hurts so much to see so much work compressed into one video. You are awesome. I hope you never see my car
@daeshawnr2595
5 жыл бұрын
Does anyone else watch and wonder; "How in the heck does he remember how all that stuff goes back together?!?"
@milanmastracci
5 жыл бұрын
LOL with a lot of trial and error ;) jk, I'm stupidly organized.. I've labeled every single bolt that I've removed from the car to prevent any mix up from happening
@danielohara1040
5 жыл бұрын
@@milanmastracci are you a mechanic or just really good at winging it? I've always wondered
@milanmastracci
5 жыл бұрын
Bit of both ;)
@MotoMedicine904
5 жыл бұрын
Theres this thing out there also called a Bentleys Manual. Tells you where everything in the car goes and every service
@GreyMatterStew
5 жыл бұрын
@@milanmastracci I always figured you just got on KZitem and watched some instructional videos. 😃😀😄😂😂😅😁
@cozydram1
5 жыл бұрын
wicked
@Sergiosniper100
5 жыл бұрын
Milan tha 🐐
@caylanhuang106
5 жыл бұрын
What's that song called that plays starting at 1:00?
@alexvargas5550
5 жыл бұрын
You should put some eye protection when working under. Safer. Keep up the good work.
@leonmilo8691
5 жыл бұрын
We miss you milan:( We need more of your videos dudee!
@christophermyers4422
5 жыл бұрын
how much this cost to do - this
@Riyazatron
5 жыл бұрын
So satisfying to watch. Keep up the good work Milan
@zech007
5 жыл бұрын
While you still have the engine out you should get some inner panel cavity wax for rust proofing, leave no hole uncoated!
@sergiomadureira9985
5 жыл бұрын
Cant wait for the next video! Finally after 2yrs of hard work is finally coming together! Keep up the good work 👍
@joelpalmer
5 жыл бұрын
Great video, please lea e that music out, had to mute it
@markmorris8118
5 жыл бұрын
I’ve commented a few times over the mini build . Like your videos. I’m doing nearly th same build if you want I can send you some pictures. 2009 Jcw tuned to the hilt . I was talked out of going big turbo. Want to see if you have any on the issues they warned me about . Word I got was you will over boost and your running stock compression which is actually a bit lower than MCS will cause problems. Guess it’s just who you trust . I get the sense money isn’t that big of an issue with you so I will stay tuned lol
@michaelchavez7072
5 жыл бұрын
Thank you for sharing the videos and knowledge. Just wondering in what video you put the short block back together? I would love to see how you worked out the main bearing situation, sealed the bedplate, installed the rods, and painted the block.
@kmart55
5 жыл бұрын
You should get in contact with the JCW team, eh
@OneCylinderProductions
5 жыл бұрын
FINALLY. ALREADY LEFT A LIKE
@MBZXZ
5 жыл бұрын
whats the lines in the engine bay?
@milanmastracci
5 жыл бұрын
AC compressor lines, the shifter cables, and leads to and from the battery
@MBZXZ
5 жыл бұрын
milanmastracci i mean the brownish dirt on the paint
@ExileZO
5 жыл бұрын
I wish I had the space and the money you did little bro.. Your build is coming out amazing!
@FotisMnts
5 жыл бұрын
Congrats Very Nice Video!! I Have a Question What Do You Do For a Living?
@thetraindriver01
5 жыл бұрын
He tells you in his past vids, school finished and he decided to do KZitem full time for a while now among some odds and ends here and there 👍
@JohnKaufmann
5 жыл бұрын
Must have some very supportive parents!! Regardless he's doing a great job! Impressive!!
@dan5825
5 жыл бұрын
Are you doing an engine swap or something cos would you actually make your money back on this car with all the work to putting in
@stevenmerrick7497
5 жыл бұрын
What kind of car did you say it was a mini mouse mobile.
@FULLTHROTTLEAUTO
5 жыл бұрын
Great video. Can't wait to see this thing done and on the track.
@lVIemories
5 жыл бұрын
Notification squad
@christophermyers4422
5 жыл бұрын
love your projects - but f++k me all money and parts labour you could real fast car
@samdefoe1043
5 жыл бұрын
Looking good, can’t wait for the engine to go in
@lucapetriello4734
5 жыл бұрын
Want to buy a ticket for a chance to win a signed Marner Jersey lol
@mohamedlahlal1372
5 жыл бұрын
Woehoe!!!
@dkdzyn
5 жыл бұрын
Excellent resource and information. So clear and precisely step by step that anyone could follow you! That said, you have an ultimate set of tools! WOW!
@CanadasBoss
5 жыл бұрын
What up man? I work with kyle! Just started watching your channel. Very good quality.
@hapkin2179
5 жыл бұрын
Is that yellow stuff an undercoating, had some on my engine bay as well and it was very stubborn to get off too
@TheOnlyxXBAADMANXx
5 жыл бұрын
Hapkin yellow stuff Is wax coating
@nurallahdal149
4 жыл бұрын
When back subframe restoration ?
@redcatsassociate
5 жыл бұрын
I can appreciate hard work, but unless he's planning to keep that mini inside of the garage for the rest of his life, then all that hard work is going to be waste.
@bryanviper
5 жыл бұрын
Should of Ceramic Coated the Engine Bay & parts :D
@milanmastracci
5 жыл бұрын
Who is to say I didn't ;)
@bryanviper
5 жыл бұрын
@@milanmastracci haha well I dont see a video of it, but hopefully you did, thats what I would of done. Hell you could maybe even PPF it but now sure how it would last with the heat from the engine lol :D
@A-DUBCLUB
5 жыл бұрын
Dude step it up buddy. Lets get shit done!
@jacquesgouws
5 жыл бұрын
Did you upgrade the gear linkages or just replace them with new OEM ones?
@SolidStoned
5 жыл бұрын
I'm jelly of your garage man lol
@kimaniharris7922
5 жыл бұрын
I liked the music. It was chill
@stephensimpson3352
5 жыл бұрын
GREAT JOB......WELL DONE.....EXCELLENT PRESENTATION .....👍🎬❤️
@adamhi2364
5 жыл бұрын
Fury was robbed.
@ArslanAhmad1
5 жыл бұрын
Finally !!!!!
@davidrambarranable
5 жыл бұрын
Looks good sir👍
@GTlee168
5 жыл бұрын
Where can i get that under carriage attachment for the power washer
@milanmastracci
5 жыл бұрын
Description box :)
@goyo371ify
5 жыл бұрын
nice
@brandon7189
5 жыл бұрын
Man what are those line looks like dried up oil??
@mike.135i
5 жыл бұрын
i wish i didnt daily my e46 so i could do all this stuff to it
@thomascanning595
5 жыл бұрын
Good work! cant wait to see/hear it run ;)
@milanmastracci
5 жыл бұрын
Oh me too buddy!! Its getting there :)
@Pendaws
5 жыл бұрын
As always, great attention to detail. :)
@milanmastracci
5 жыл бұрын
Thank you! 👊
@sinisasgarage
5 жыл бұрын
How much time did you need to do all this?
@donatibb
5 жыл бұрын
Ku me shkru qe ki qit videooo 😂
@jesusisking7523
5 жыл бұрын
Great job, good video!
@Siikvision
5 жыл бұрын
Yesssss more videosssss!
@nicknac9747
5 жыл бұрын
Way to less video's 😔
@DivineAwareness88
5 жыл бұрын
Love the video, wow!! 😁
@Keepin-it-wheel101
5 жыл бұрын
Looking great..
@sicsol
5 жыл бұрын
Excited to hear this thing fired up and running
@milanmastracci
5 жыл бұрын
Oh me too!! :)
@toxyk6349
5 жыл бұрын
hi✌
@andym8367
2 жыл бұрын
Nice Job young man! Just think of how much money your saving..... ching, ching
Пікірлер: 100