Sir, This is the best video I ever saw, to solve a problem.
@maryjo8882
3 жыл бұрын
Why do so many people make this difficult? Thank you, you have saved me hours of frustration.
@karenvaughan5567
2 жыл бұрын
You are so clear, easy to watch, listen to and understand. It looks so simple when we all know a circle isnt. I have tried so many video's to learn this, but your video? I got it on the first try. Thank you so much for putting this up. Also thank you for not saying a bunch of stuff to make a long uneeded "content" instruction. Straight to the point, and I will actually remember and keep the knowledge! Also I wish I could show a picture of the one I just did, it is not "perfect" lol none would be but it is darn close. I am so utterly impressed.
@Anenome5
3 жыл бұрын
Brilliant, this is exactly what I was looking for, thank you. Building a prototype and needed to find the exact center of some wood I'm cutting out with a router.
@anoopelias3668
Жыл бұрын
Verygood
@sto2779
4 жыл бұрын
0:36 Dude has a quality compass, it's good to see people taking precision seriously.
@ElizabethFryAuthorEAFry
Жыл бұрын
OMG, thank you so much! I was going mad trying to find the center of a large circle that my ruler was not large enough to measure. You saved me from a raging insane breakdown. lol
@shybound7571
6 жыл бұрын
last year i found this out myself and told everyone about this but it turns out that this has already been discovered lol
@robertfischer380
5 жыл бұрын
Thanks for the reminder! It's been well over 50 years since I learned it. So it was a little foggy. 🤓I guess if I'd gotten the compass in hand I could have eventually gotten there... saved me time and head scratching. Thanks again.
@mickd6942
9 ай бұрын
Back in 79 when I was at school they chucked some old books out and I picked one up , one of the things in this book was the same as your method but using a square instead of a compass , a few years after that on a building site a brick layer had cut out a circle of wood for a template but not marked the centre to attach his line to , I showed him how to find the centre and he was amazed , it was for a circular window aperture .
@taab7
2 жыл бұрын
thank you. Learnt this in primary school over 50 years ago and had forgotten the method.
@andrewcarr2657
3 жыл бұрын
Thank you Eric,I should of listened harder at school glad you payed attention ;)
@indianartist5422
5 жыл бұрын
Aahahaha thanks allot bro its really usefull and easy method for me,,, 🙈🙈🙈 i was searching an easy method for center point from a long time 😂😂😂 it will really helpful for my art 🎨 thank you 😅
@emlinmohing8568
6 жыл бұрын
Thank you sir! Your explanation is very easy to understand. This really helps!😁
@reachthroughreality
8 ай бұрын
Thank you so much. I've seen so many videos that juat say "draw a perpendicular line" without showing how to make sure it is perpendicular.
@editz_jai26
5 жыл бұрын
This is best. I learnt it so fast. And now I am doing these like questions correctly whichi is good for me.
@nickwinckler2255
3 жыл бұрын
So simple and amazing. Guess I just found another tool for my mental toolbox
@patrickblaine1524
4 жыл бұрын
Thank you, Eric!
@gwyn.
5 жыл бұрын
In my opinion the best way to get center. Thx
@sadhnasingh6778
3 жыл бұрын
Very good ,the best helpful vedio in simple Eng language thank you so much sir 👍
@JulesMugisha
Жыл бұрын
So I am not the only one who had a hard time finding it😃
@tiagopariol
Жыл бұрын
Great tip ! I will make sure to use it !
@cammacgregor9354
5 жыл бұрын
Excellent explanation
@hydradynamogamingandapps1383
4 жыл бұрын
Helping video🎥
@crazyminds1298
4 жыл бұрын
Oh now I remember
@eliasho1262
4 жыл бұрын
Thank you so much i pass my exam because of this video
@pieubhowmick9730
4 жыл бұрын
Thank you
@ThePaulTM
6 ай бұрын
Thank you, There is a Wonderful Geometric order to everything. This Wonderful Helical Order is obviously snubbed by the Chaos Theory Important People.
@naveeshreemusule7430
5 жыл бұрын
Thanks a lot love u
@jasonarons8637
11 жыл бұрын
we never learned that in geometry, life saver
@Clacla722
3 жыл бұрын
Fast and easy thx
@AmyElizabethFrith
7 ай бұрын
Thanks !
@bindhubinoy13
2 жыл бұрын
കൊള്ളാം ചേട്ടാ പൊളിച്ചു ചേട്ടന് മലയാളം അറിയത്തില്ലെന്നറിയാം അതോണ്ട് തന്നെ മലയാളത്തിൽ ഇടുവാ പിന്നെ സത്യം പറഞ്ഞാ ഇംഗ്ലീഷ് അത്രയ്ക്ക് വെല്ല്യ പിടിയൊന്നുവില്ല 🤪 മലയാളികൾ ആരേലും ഉണ്ടോന്നൂടെ അറിയാലോ 😁
@TCO3011
3 жыл бұрын
Thanks! I have a use for this..
@katielucy8453
6 жыл бұрын
You just made my life so much easier dude. Thanks!!
@ahmedbaig7279
3 жыл бұрын
Very easy and logicle. When you draw a circle it is easy or piece of cake.
@CGEarts
3 жыл бұрын
good job
@Cluless02
4 жыл бұрын
Best way - use the point of a compass!
@ferdinandinc2899
3 жыл бұрын
Appreciated
@rammohang4760
5 жыл бұрын
Thanks for the tip.
@mariobasic477
5 жыл бұрын
Finnnnaalyy someone clever
@zeedankhan7575
3 жыл бұрын
Thanks
@puiwaiwu7870
7 жыл бұрын
thanks a lot helped me on my homework
@joannesingh8615
6 жыл бұрын
Thank u SOOO MUCH🙏🏼❤️👏🏼
@jikaikas
5 жыл бұрын
Thats pretty gude ma dude
@firdouspanfarosh2623
4 жыл бұрын
Thanks 😊
@ronpearson1912
5 жыл бұрын
If I want to find the center of a dowl rod how would you deal with the marks that are outside of the circle?
@reddburg
3 жыл бұрын
I saw Adam Savage use this trick but he didn't draw that first line, just picks random points on the circle & a random compass width. It should be possible to do this where the arches are smaller & always intersect on the inside of your circle.
@Floatingbluedots
5 жыл бұрын
Nice vid I like it😋
@TeritotheLegend
7 жыл бұрын
thankyou so much Mr. hart your 1 in a million
@jonnyhead
4 жыл бұрын
Surely you can just measure the second line running through the centre of the and halve it.?
@thereynolds2725
3 жыл бұрын
You can measure, but this method requires no measuring at all. It is more accurate because it comes directly from the geometry of the circle itself, regardless of size.
@johnny8dljuneau
3 жыл бұрын
very useful, although what if the circle is incomplete (like a halo, for example)
@nguroyalff6959
7 ай бұрын
👍👍👍
@dengchier2139
8 жыл бұрын
what if you use x and y axis. like measure the diameter then divide it by two i.e d/2 then join he lines
@wrtyler5045
5 жыл бұрын
The point of it is that you don't measure anything. And measurements will never be exact.
@leeferriss2392
Жыл бұрын
If you dont know where the centre is, how do you know where to draw a diameter?
@compilationtube1742
6 жыл бұрын
Lifesaver. Doing Geometry in 8th grade and it is killing me. ;-;
@rohan_2298
5 жыл бұрын
Very...... Good......!!!!!!😀😀
@mixoprorunner9196
5 жыл бұрын
thanks
@silentscribes1905
9 жыл бұрын
I love it
@lidarman2
5 жыл бұрын
Q: So why not set compass to the radius of circle. Put the pin on the edge of circle and make an arc....repeat at another point on the circle edge. The intersection should be the center?
@wrtyler5045
5 жыл бұрын
you don't know the radius of the circle as you don't have the center
@pepevonkek7803
5 ай бұрын
Lol. Radius is half of the diameter of the circle. Basics.
@tabeentariq9126
6 жыл бұрын
Thanks sir it helped a lot.
@limsalalafells
8 ай бұрын
Why draw the furst line? If you have a compus why not just make 2 arches from random points on the circle, then draw the second like where those intersect and continue thensame way to the 3rd line?
@limsalalafells
8 ай бұрын
If you don't need the circle cut in quarters you can even just take 3 random points on the circle and make the arches of each point to find the interests for 2 pairs of points and make the lines. between them
@anantasharma2309
3 жыл бұрын
Sir I able to understand how to find the centre of circle
@user-qi5sy2er8n
14 күн бұрын
help my circle is too big for my compass
@reenasinghrajput3834
2 жыл бұрын
You are jinious
@user-bs6by4vl2w
4 жыл бұрын
You know the method using only 3 circles and 2 straight lines to do that?
@joanngumeta8937
6 жыл бұрын
*QUICK MAFFS!!* (Sorry. I had to do it.)
@johnalwynpinto1664
4 жыл бұрын
😘tq sir
@mashtali1
8 жыл бұрын
very well. without any measurement.
@notlamar7564
7 ай бұрын
what's the justification for this?
@allen8478
6 жыл бұрын
U related to vi hart?
@jirka96150
3 жыл бұрын
I’ve been trying to remember how this was taught to me in school! Worst ever method!
@Must_not_say_that
Жыл бұрын
What a palava! Why not just place your compass at its greatest extent on the circle. There you have a diameter. Simples.
@benjlancionofficial5150
2 жыл бұрын
Amogus
@titaniumquarrion9838
4 жыл бұрын
Or fold the circle in half twice and where the folds intersect is the center - takes about 6 seconds....
@reddburg
3 жыл бұрын
It's not as accurate & not always possible to fold your circle in half. I learned this trick from watching a maker who needed to find the center of a circular piece they were working on.
@titaniumquarrion9838
3 жыл бұрын
@@reddburg It was a tongue in cheek remark Brother :-)
Пікірлер: 91