Even after he's gone, he's still helping people out. Thanks, JC, for straightening out the JST mess for me.
@HugDeeznueces
4 жыл бұрын
Where did he go????
@floorpizza8074
4 жыл бұрын
@@HugDeeznueces He tragically died in a motorcycle accident.
@bannanapancake
2 жыл бұрын
😔
@idofivethings6222
2 жыл бұрын
@floorpizza actually
@floorpizza8074
2 жыл бұрын
@@idofivethings6222 ??
@octapc
3 жыл бұрын
Wow! I haven't been here since JC died. You are still giving us help to this day. RIP
@emmettturner9452
3 жыл бұрын
What happened? I stumbled on this when looking for reference info about JST connectors.
@octapc
3 жыл бұрын
@@emmettturner9452 motorcycle crash. He lost control.
@emmettturner9452
3 жыл бұрын
@@octapc Yikes. I ride too. Hope his family is doing OK. :(
@rl2109
7 жыл бұрын
Still great info... This is why you are so greatly missed by so many thousands... Rest well my friend.
@bordonbert
5 жыл бұрын
MARSHALL AMPLIFIER TYPE: Glad I found this. It helped immensely with my own search for an obscure part. I hope you will forgive me for posting this for others who may find it too coming from the same field as myself. Just for reference for anyone who comes here as I did looking to identify them from their guitar amplifier, Marshall use a version of these on their PCBs in most of their amp models. They chose the slimmest in the range, the "EH" type which isn't shown in the video above as it is obviously a separate application. They are 2.5mm pitch with a 3 sided shroud open all along the whole of one long side on the PCB mounted male socket. It also has two slots on each side, one internal to the shroud and one through it. The wire mounting female plug has two locating/locking ridges down both of its short edges which fit into those slots. The socket also has small vertical ridges along the shroud back wall between each of the terminals while the plug has notches to register with them.
@xtevesss
3 жыл бұрын
You just saved my (JST) life. 4 years after video release.
@graywoulf
4 жыл бұрын
It is amazing how much he taught us. Rest in Peace JC!
@Steve-jd1rr
4 жыл бұрын
still got most of his videos saved as a playlist, very informative. Such a shame RIP
@thanhavictus
4 жыл бұрын
Wait he's dead? What happened?
@graywoulf
4 жыл бұрын
@@thanhavictus He died from injuries sustained in a motorcycle accident. He is missed here on his channel for sure but a lot of his advice and tutorials are still relevant today.
@elitenetworksllc4378
3 жыл бұрын
People like you make the internet what it is. Thank you.
@Michael-lx7px
7 жыл бұрын
Thank you very much!!! You just solved a 2 year problem I've been having trying to locate the right JST 2mm 3pin. Found the exact ones I need on ebay and just ordered them. Thanks again!!!! Up Up n Away, Michael
@davidoludepo
6 жыл бұрын
Wad up Micheal, i need a JST 0.8mm 5pin with a converter to usb otg, any idea where i can get that. Thanks
@InobuZ
5 жыл бұрын
There is a bit of a learning curve for JST but after you wade through it is makes sense. There are series of connectors. The x.xmm values is the pitch or the spacing of the pins EH - 2.5mm PH - 2.0mm ZH - 1.5mm SH - 1.0mm ACH - 1.2mm Wire to Wire There are 3 components to a PCB connector. The Contacts /pins The Header/ piece mounted on PCB The Housing/ The piece that fits into the Header The ACH - Wire to Wire Plug Contact and Socket contact ----- remember pins are called contacts. They have Plug Housings and Socket Housings. look at it like a plug and wall socket. The Plug contacts/pin fits in the Plug housing. The Socket contacts are placed in the Socket housing. So if you jump to 6:15 the beige connector on the PCB is the header. The white connector is the housing. The contact fits in the housing. You have to make sure that you order the correct series of contacts. The contacts or pins are either EH,PH or what ever. You have to watch as sometimes they will call a small connector JST when its not. That beige header does not look like a JST header. I'm posting this just to solidify what I learned a few weeks ago.........Teaching it is the first steps in knowing it.
@Sam-fp8zm
Жыл бұрын
thanks
@mrschnider6521
Жыл бұрын
thank you, i always thought there was 10 holes ever inch on most pcbs, thats t he 2.54mm i have a bunch of crimps there are all JX wtf does this even mean? these connectors say jst-xh
@robertambrose6326
7 жыл бұрын
First of all I really like your videos, very high signal to noise :-) The way I tell the JST-SH from a Pico Blade connectors is the PB has one or more humps on the back and the JST-SH is flat. Also the JST-ZH (Spektrum Sat) pins are round, where the JST-SH and Pico Blades are flat. The JST 2.0 common to the hobby would be a JST-PH, popular on nano quads like the Tiny Whoop, et.al. The JST 2.5 is actually a JST-XH. The very first connector you showed but didn't name was a JST-RCY, which is commonly used for micro quad battery connectors. To solve the problem of crappy plastic insulation, I custom make all my cables and hand crimp the connectors (Pico Blades are a real pain) using a Engineer PA-09 crimper. FWIW, the Pico Blade and JST-RCY connectors are suitable for wire to wire connections. The PB is good for signal ( < 1A ) and JST-RCY for low power ( < 3A ) applications. I like to make my builds modular where possible as I'm often having to repair them (I suck a flying). I get the connector and pins from Digikey.
@mozzer1775
6 жыл бұрын
Hi. Do you have a link to a place you like where we can buy the connectors if we want to crimp our own? I am a noob so I am not sure of the size but I build 5" quads (JST 2.0?). Thanks!
@wugrace3946
5 жыл бұрын
Hi Robert,i am Grace,nice to know you are interested in JST -PH connector ,we are manufacture in China ,send your inquiry to me: sales@szchanghe.com.cn ,i will provide perfect solution for you.
@teriyakikitten
2 жыл бұрын
I have searched and searched and I think you have just shown the mystery connector I've looked for. Thank you!
@ChrisOlin
2 ай бұрын
Perplexity AI recommended this video in relation to trying to identify a JST connector. Looks like this creator has passed away, but his legacy continues to live on helping people.
@sheabutter173
6 жыл бұрын
man this guy was so helpful and full of so much info ... God Bless your soul JC
@NukeFPV
5 ай бұрын
Still giving back bro..... After so long, you are STILL answering my questions... Happy flying brother ;)
@raymondmyers100
7 жыл бұрын
Dude. I wish you had posted this 2 weeks ago. I just bought a drone from a swap meet and was trying to figure out what I needed and it took me a couple of hours to try and figure it out. fortunately I did get the right connectors but this video would have saved me a ton of time. thanks for all the great content man.
@Daclaem
4 жыл бұрын
how many times did i find your videos when i needed infos , thanks a lot lot dude, rip.
@theMindscapeChannel
7 жыл бұрын
Great job explaining the connector types... been searching everywhere trying to understand these cables and connectors...
@babakzekibi315
3 жыл бұрын
I just visit your page just to hear your voice brother. Rest in heaven.
@davbra01
6 жыл бұрын
Thanks so much for putting this together! I've spent so much time trying to figure out what connector I need for my 4-in-one exc to omnibus and now I understand what I need!
@Firografi
4 жыл бұрын
He's no more to read your words! :(
@B33SON1
7 жыл бұрын
thanks for the video. JSTs drive me insane
@johncrosley9415
3 жыл бұрын
A little general information on plugs and sockets. If it’s got pins it’s a plug and if it has holes it’s a socket. The shell defines the gender. The JST battery connectors in the video are thus. The plug fixed to the pcb is female and the socket on the end of the battery cable is male. So you can have female plugs and male sockets.
@tommysmith2908
7 жыл бұрын
Outstanding JC! I'll be coming back to this one over and over. I also like your Birds and the Bees explanation, haha :)
@woodantoinette
Жыл бұрын
Thank you for taking the time to share this helpful experience.
@swapshots4427
5 ай бұрын
So glad I found this.! Thankyou JC.! R.I.P.
@SquiddyJ
4 жыл бұрын
This is such a life saver, it even works with Dell OEM PC cases for custom build.. cause Alienware likes to use those for their own motherboard and not for any other so this resolves everything!! Thank you so much!!!
@richardcerni9996
6 жыл бұрын
A great video and explanation. I can't believe I found you, and just in time. I broke the wires of my JST cable when my receiver got yanked out of my quad after coming down hard (ie: a slight crash....LOL). Have been asking around everywhere else and everyone else of the who's who in this quad hobby and no one could tell me what the cable was or what it was called or where to get one. Buy a new flight board they said. I'd still only get one cable - I said. Now I have found what I need on ebay of all places, and I have you to thank for it. Cheers and keep up the good work. I've subscribed.
@Firografi
4 жыл бұрын
He's no more to read your words! :(
@ianhillman4007
3 жыл бұрын
Do these connectors just push in and pull out or do you have to squeeze some tab to work them? I'm always afraid of damaging a connection if I just yank them out.
@atomicwatts
7 жыл бұрын
This is going to help a ton of people. Great video.
@kueller917
7 жыл бұрын
Thanks so much for the info. Not in this hobby circle but I was just looking to add a JST connector to a circuit I'm building and didn't expect... all this.
@treeninjafpv1596
7 жыл бұрын
Yeah JST's, require a whole different set of schooling. lol :) We have a good teacher, thanks JC.
@ruftime
7 жыл бұрын
Another great vid JC. Built an AWK210 after seeing your review and I have not been disappointed, thank you! I 3d printed a ninja flex sleeve to take up the gap between the camera mount and my run cam swift 2/hs1177 style. Soft-mounted cam;-)
@rogerball6265
2 жыл бұрын
Thanks this video really helped me. I have various size JsT’s on a Ho Scale locomotive sound DCC decoder. I need some extra JST’s to be able to test this decoder with a test kit that I have. So thanks again
@clutester
7 жыл бұрын
I was trying to figure out this exact problem about a week ago for tiny whoop battery connectors. FYI micro JST 1.25, also was trying to figure out what the so-called Power Whoop connector was called... JST-PH 2.0.. I know you are going to save some people at least a few hours of research if not days worth of waiting for the wrong part to ship. Thanks
@Nebul3r
6 жыл бұрын
try aliexpress the prices there are much lower, and much appreciation for all youre tutorials, it helps allot of ppl like me who dont have much knowledge about electronics and are new to the hobby like me, on one of your other videos i made a request on how to make the frsky x8r receiver work with the omnibus f4 v3 , ive hit a dead end
@Davedgoochgmail
7 жыл бұрын
Very good. Is the 1.25 mm the spacing pin to pin?Please cover the different methods of controller output to ESC.
@davidwood8800
7 жыл бұрын
Thanks for the tip....and thanks for the very good videos you produce plus all the hard work...
@CoppertopFPV
7 жыл бұрын
Hurrah best video this year! Bloody things drive me up the wall.
@DaveNorthWest
7 жыл бұрын
How and where do you get the correct tools and crips to build your own connectors? Particularly the JST-SH, 1.0mm spacing one's?
@elfkind5590
7 жыл бұрын
Suddenly, a big fuzzy part of the hobby comes into focus!
@matthewfisher5993
5 жыл бұрын
Great video. Simple explanation for what has been complicated to solve on my own.
@healthbeauty7853
Жыл бұрын
I need a replacement cable for my xecuter 2.6 modchip. I'm not sure if it's a molex picoblade female 8 pin connector wire or a 1.0mm 8 pin female jst connector wire.
@WanderinWizard
7 жыл бұрын
great vid man wonder why i didn't get the jst's i wanted. 😁the male end pin looks like well you know...🤣
@hillmakeitbetter
6 жыл бұрын
Thanks specifically for the Male vs Female end. Great, helpful vid.
@Firografi
4 жыл бұрын
He's no more to read your words! :(
@Firografi
3 жыл бұрын
@Crypto Man bike accident
@Nick-xe2hu
7 жыл бұрын
whats the strange 5 pin connector you mentioned from RMRC? You stated it at 9:10 into the video. Its the same one found on most Lumenier cams and VTxs as well as on the TBS UNify Pro HV
@reisfpv638
7 жыл бұрын
awesome show! I always learn something from watching your Channel! thank you, now I know right where to go to get my jst connectors.
@TomDetka
7 жыл бұрын
For hookup wire try Adafruit they have 22awg stranded wire with silicone insulation. Its very flex-able I use it for all my cables.
@Supaspikemaster
7 ай бұрын
So Helpful! TYSM! ❤️❤️❤️
@flat-earther
11 ай бұрын
5:20 the first ebay result shows a 1.25mm pitch wire to wire connector. I think that is not JST-GH 1.25mm but Molex PicoBlade 1.25mm because JST-GH offers only wire to board connectors and not wire to wire connectors. So many sellers on the internet are selling Molex PicoBlade wire to wire connectors and misdescribing them as JST which doesn't exist.
@RikRussell
2 жыл бұрын
I have LRP 3200mah lipo with a XHR-3P connector bought for my Sanwa MT44. The LRP lipo does not have a separate balance lead how do I connect this to a charger that has an XT60 charge port and a balance lead port for 1-6s Lipo's. I'm stuck on how I charge the LRP lipo with the included XHR-3P connector.
@michaelhesseljr5289
3 жыл бұрын
You can put your the connectors on your own wire. I suggest looking into that. The 2.5 mm are XH's.
@pakalkin1
2 жыл бұрын
I need help to determine which one is the smaller connector overall for 5 pin... I need to pass 5 leads cable through small hole (electric guitar pickups with 28awg leads) is the SH 1.0 the smaller or there's another? Thanks in advance!
@ken-kamm
7 жыл бұрын
Thank you so much for this video. I have been wondering where in the world I can get high quality silicone wire harnesses for things like the XSR. Now I know.
@DESTINYFPV
4 ай бұрын
Is there a certain way they go back in the connector the little metal end on the wire?
@flooooooooooooooooo
Ай бұрын
I am working with a 1.5mm pitch ZH connector for a motor. It has female ends on both sides, how can I get it to connect on a 2.54mm pitch breadboard? I was thinking of getting a female- to male adapter so it can plug into the breadboard, but the pitch would still not match. The only thing I can think of is cutting off the plastic connector and putting the wires in individually. Any other ideas? I am new to working with electronics.
@mikesmith9972
7 жыл бұрын
It's too bad we lost such an awesome person. We'll miss u brother..
@majedmohammad_
Жыл бұрын
Thank you for the video, it's very clear. What AWG size is suitable for each?
@WoodenCreationz
4 жыл бұрын
Great video... When trying to buy these can be pretty challenging some times until you learn the lingo. Thanks
@Firografi
4 жыл бұрын
He's no more to read your words! :(
@kaskalo2
Жыл бұрын
I god camera that has 3pin (female) that is slightly wider then the 3pin input (male) that i have in my FC. So i assume this is the topic. How do i solve it? Are there any adapters 1mm to 1.25? Or vice versa? Or can i simply cut the wires and swap the female parts (i have proper cable with fitting female part on old camera)?
@mickthebass6086
7 жыл бұрын
Great tutorial JC, have you tried crimping some of these terminals ? Man !.. Its enough to test anyone's patience. I dropped a few on the living room carpet....Never did find em again...D'oh.!!
@noumanahmad86
7 жыл бұрын
recently i bought a drone (gteng t905f ) it has proprietary 4 pin connector attached to a 2s lipo battery....my question is that can replace 2 pin connector with a 4 pin jst connector on 2s lipo battery? and how? because i can't find the proprietary batteries online
@winstonledford3127
3 жыл бұрын
19 pin plug for system connection for ac-and dc for fisher all in one.
@tomtom9184
6 ай бұрын
Rest in peace. You're still helping.
@dazzlekernow1408
7 жыл бұрын
Finally a video i can point people too. Another one for the RC bible. Thanks pal!
@ksolomon43
4 жыл бұрын
Your video is awesome, you just answered all the questions I had to finish up my Eskateboard!
@Firografi
4 жыл бұрын
He's no more to read your words! :(
@ksolomon43
4 жыл бұрын
Firografi Oh nooo did he pass? May he Rest In Peace.
@Firografi
4 жыл бұрын
@@ksolomon43 : Yes long ago. succumbed to the injuries after an accident.
@ksolomon43
4 жыл бұрын
Firografi wow sorry to hear.
@Firografi
4 жыл бұрын
@@ksolomon43 : yeah! Sad indeed. But he left a lot for us to learn.
@MandaloretheSavage
2 жыл бұрын
This helped me Id the connector I had on a laser engraver, thank you so much.
@TheRipper3564
2 жыл бұрын
What is the specific name of the connectors of pc fans and the connector in the Mainbord?
@Bulldawg_Bill
Жыл бұрын
I can't find the type of cable and connector I need anywhere, any chance you could help me identify it? It's for the camera assembly to drone connector on an X-Star Premium - 12 pins/wires, appears to be male to female.
@miguelsalami
4 жыл бұрын
EXCELLENT tutorial on RC harness/connectors👍 Thank You❗
@Firografi
4 жыл бұрын
He's no more to read your words! :(
@goofusdoobus2179
3 жыл бұрын
@@Firografi what happend to hi,m?
@Firografi
3 жыл бұрын
@@goofusdoobus2179 : He passed away in a motorbike accident. Around 2 days after his last video.
@garylucas637
4 жыл бұрын
I have an older Zenith television that currently has a mono chasis but want to upgrade it with a stereo version of the same chasis. The speaker connector that goes to the board looks like a JST maie two pin. Not sure of the size though. I have one speaker with the proper connector attached to wires but need another one for the second speaker. Can you do a video on the various two pin JST connectors? Thanks.
@alfonsochan5622
3 жыл бұрын
Best information ever, thanks. Appreciate your feed
@apikor2
3 жыл бұрын
You skipped the 2.0mm. I think the NES-001 top loader I'm working needs a JST right angle header, problem is I'm guessing what it is, I know it's a 7 pin, the 2.54 is to big and the 1.25 was to small. Anyone know which one I need?
@CoppertopFPV
7 жыл бұрын
Do you know what the connector is on the foxeer tm25 switcher? It has a clip on it that you push to release it.
@jonathanremus5697
4 жыл бұрын
Have u ever found JST 8 pin 1mm cable that works like an extension? So it has a female head at one end, and male at the other.
@jerryparent8270
6 жыл бұрын
I have a JJRC H36 micro drone. What I want to know is the name of the connector used on it's 3.7v 150mah battery called? Is it the male and the female connector? Thanks, Jerry Parent
@jerryparent8270
6 жыл бұрын
In a Visuo XS809HW drone. Identify the Name of the connector (plug) that connects the proprietry battery when inserted into the Drone? Thanks, Jerry Parent
@eternalbeing3339
4 жыл бұрын
Can i connect a 1.25mm 2 pin male to 4 pin female?
@airport4173
2 жыл бұрын
WHAT SCRAP ITEM will have JST 1.25 male plug in it? i don't want to wait a month for a bundle from china.....
@lemech
5 жыл бұрын
Are there dedicated tools to remove/unplug these connectors? Some smaller ones are difficult to remove with fingers.
@mattyd_gaming7425
7 жыл бұрын
ive got a problem with my f3 sp fc. i cant get in it. i flashed it with bootlaoder pins and flashed fine. powered of and on but i still cant get in it. is jt broken?
@ludlow7369
5 жыл бұрын
Also you told us about the JST SH 1.0mm & 1.25mm, but we didn't get the names of any of the others i.e., the red one you show at first saying a JST search defaults to it. I still don't know what it's called. But thanks for trying though.
@samueletirinato9443
7 жыл бұрын
Hello and thanks for your fabulous tutorial, I can not find already prepared cables with 2 male connectors 3Pin 15 cm Molex Micro JST PicoBlade 1.25 mm, in the links you provided have only one connector, I have to find them with two 3-pin connectors male, but I can not find them. can you give me a tip? hello from Italy, Samuel.
@phazerworld6300
3 жыл бұрын
I need a 4 pin male that plugs into my Yamaha Bruin power port? Not sure where to get it
@cl1650
4 жыл бұрын
if there are different color but same it's ok to connect?
@PunakiviAddikti
4 жыл бұрын
I buy the connectors and crimp pins as a kit, and just insert my own silicone wire. It's the only way to make sure they have silicone wire. Always go for silicone wire. Here's a quick tip: pre-tin the wire, insert it while the connector is still part of the metal stock strip and crimp it using really thin pliers, or even your sidecutters. Then solder it. NEVER crimp pre-tinned wires unless you're also soldering them in place.
@flagstoneave
2 жыл бұрын
where can I find DF13 5 pins connector cable
@B33SON1
7 жыл бұрын
do u ever use Male JSTs with wires attached to female with wires attached instead of servo cables? JSTs are so much smaller than the servo leads which can be very useful on smaller builds.
@ProjectBlueFalcon
7 жыл бұрын
Yep I do. Instead of using the big red 2 wire JSTs to connect cameras and VTx's to the PDB I use a 2 pin 1.25mm male and female connectors. Much smaller but does the same thing.
@apisxquad1732
5 жыл бұрын
Good review.. Every seller / maker must provide details specification regarding types of connector that they install on their electronic parts.. Just simply put in the website..
@kaede15
3 жыл бұрын
I'm pretty sure I have the 1.25 but the damn thig is NOT SQAURE on the top edge does anyone know what its called?? Its driving me insane!!
@hardkur
7 жыл бұрын
im always so happy when i look for something and see You made video covering it :D , is there some kit avilable that would cover most of them? i mean to let me do my custom ones?
@bobhatcher5505
6 жыл бұрын
I get my components and connectors from AliExpress in China (The Chinese Ebay), most of the small electronics stuff is 10% of the US/UK prices. US/UK sellers buy from them and then whack the price up for you.
@davidferguson8478
3 жыл бұрын
You can also buy them in kits as well so at least you will plenty of them
@vhockada
6 жыл бұрын
I have some leds I want to rig up to my quad and I have 22 gauge wire I’ll solder to the led but I am not sure what connector I need to plug into the 3s battery?
@YigalBZ
2 жыл бұрын
Can you please refer to the amount of current these connectors can hold?
@goofusdoobus2179
3 жыл бұрын
whats the sixth jst pin in the thumbnail pls i need it for my drone
@cnwch1
11 ай бұрын
Super useful. Thanks!
@greygoose9721
7 жыл бұрын
love your videos. very good job. thank you!
@Ed19601
5 жыл бұрын
How about the 2 pin connector for batteries. All different as well
@kevinm3751
4 жыл бұрын
Great tips, thanks a ton because you just saved me a ton of money and aggravation. This is just one more reason we need standards in electronics! One question though, if I was search for wire for these what gauge wire would be best and is there the potential for one size fits all with respect to wire size? I dont want to bother buying premade connectors and would rather have a kit where I can build my own in whatever size and length I need for a project.
@Firografi
4 жыл бұрын
He's no more to read your words or answer you! :(
@AnnaVannieuwenhuyse
2 жыл бұрын
The appropriate size wires for JST connectors are a range, not one size fits all. Wikipedia lays it out nicely in a table. en.wikipedia.org/wiki/JST_connector
@marksherman630
7 жыл бұрын
How could this be interesting? But it was! Good info, thx.
Пікірлер: 279