Sometimes you inspire me. I had no idea they made the modular intake tube. I had been looking at a CAI intake but they run around $400 and since the stock system already brings in cold air the Airaid made more sense for me. So I ordered an Airaid for my 2019 Tahoe and added an AEM dry performance filter. I'm not a fan of the oiled filters. The AEM is washable/reusable. The Airaid MIT definitely cleans up under the hood, which is why I did it. Any performance or mileage gains will most likely be undetectable. It does make a little more noise when you accelerate but I hear no difference at cruising speed. Thanks for showing us the ways of GM
@TWAMotorsports
11 ай бұрын
Thank you. I agree. Cleans up the look
@ElectricBlueIX
9 ай бұрын
The amount of money you spend on a CAI is a waste of money. The best thing you can do is purchase the Airaid MIT and do a drop in filter. The factory air box is waffled inside which actually helps. Don’t ask me how.
@TWAMotorsports
9 ай бұрын
That is exactly what is on it
@danorourke5184
11 ай бұрын
Great video on getting one set up after all the mods. Really wanted to see you do the suspension and of course wheels and tires, bummer. I guess you learned about this cam so it was kinda a “test” vehicle. Thanks!
@TWAMotorsports
11 ай бұрын
It was fun for a tinkering project
@JKZ103
11 ай бұрын
I run the accel ceramic boot plug wires with an angle and they are great. About the same price as msd as well. Nice build and info man.
@TWAMotorsports
11 ай бұрын
I may try those one day
@JKZ103
11 ай бұрын
@TWAMotorsports it's all you'll ever run after... they come off and on good and don't pull out of the boot and great with long tubes! Keep it up Travis...
@TWAMotorsports
11 ай бұрын
@JKZ103 I will definitely look into that
@Rodbender-n3t
10 ай бұрын
FYI I have a 2013 Suburban. I used an AC belt tensioner and belt for an 05 Tahoe. Works great.
@TWAMotorsports
10 ай бұрын
Not a bad idea
@Scrappydoo6628
11 ай бұрын
They make a stretch belt tool. It makes putting those belts on super easy. My AC belt actually came with one. I was able to put mine on from the top.
@TWAMotorsports
11 ай бұрын
If you did it a lot, it would be worth it.
@markb3129
11 ай бұрын
Looks like a nice vehicle, probably will sell quick. ✌🏻
@TWAMotorsports
11 ай бұрын
Thank you. May already be gone
@beejay8719
11 ай бұрын
Always great content!
@TWAMotorsports
11 ай бұрын
Thank you
@mrf963
11 ай бұрын
Zip ties for the AC pulley. Just get it started at the top and zip tie it then spin it into place.
@TWAMotorsports
11 ай бұрын
It actually went on pretty easy
@bdtaylor1979
11 ай бұрын
Good job with the new engine. I don’t remember if you said it in a previous video but did you replace the oil pump and if so which one did you use? Just wondering how you get 60psi oil pressure lol. My 07 Avalanche with 150,000ish miles has the original oil pump and I get 40psi on a cold start and 25ish psi at operating temperature. I already replaced the oil pressure sensor and the screen.
@TWAMotorsports
11 ай бұрын
I did. Link in video description to pump
@andyacosta1985
11 ай бұрын
How much was it to do dod and the vvt or give an estimate o that lol just incase i want to do it to my tahoe
@TWAMotorsports
11 ай бұрын
A couple thousand
@hectorsuarez853HOLLYWOODHECK
11 ай бұрын
Don't they have insulated sleeves for the plugs???
@TWAMotorsports
11 ай бұрын
Some do
@omarzowila
11 ай бұрын
My buddy Wally is gonna remove the Active Fuel Management in his 2010 Chevrolet Suburban and also, his Suburban is for sale if you want to buy it
@TWAMotorsports
11 ай бұрын
No need for another.
@jimmytwotone2127
11 ай бұрын
What cam is it because i might be doin one in the spring and I don't want a stupid crazy cam? 🍻
@TWAMotorsports
11 ай бұрын
Stage 2 truck cam from cam motion
@jimmytwotone2127
11 ай бұрын
@@TWAMotorsports I have to DOD delete it but it doesn't have the VVT so it's probably a different cam without the VVT.
@TWAMotorsports
11 ай бұрын
No. Same cam for vvt or not. I deleted all that
@jimmytwotone2127
11 ай бұрын
@@TWAMotorsports Mine only has DOD it doesn't have the VVT mine was before they started that on them so I didn't know if the camshaft is different in some way.
@TWAMotorsports
11 ай бұрын
Not aftermarket cams.
@zackvanderberg4937
11 ай бұрын
This misfire has to do with the cam sensor
@TWAMotorsports
11 ай бұрын
It was the pushrods actually
@zackvanderberg4937
11 ай бұрын
@@TWAMotorsports good to know I’ve been having a misfire in my truck too I’ll look into that, cam sensor seemed to help it
@TWAMotorsports
11 ай бұрын
Could be pushrods being too long and holding valves open
@marioking983
11 ай бұрын
First
@TWAMotorsports
11 ай бұрын
Yo
@marioking983
11 ай бұрын
Aye I appreciate the content you bring to the table I learn alot by watching your videos lol I'm what you call a KZitem mechanic 🤣 every thing I learned was from KZitem
Пікірлер: 42