So so sorry what devastating news. I loved his videos & will come to Plymouth for the funeral
@byjingobob
Жыл бұрын
Liking the sorst anger, very neat and discrete.
@QuickBikes
Жыл бұрын
Thank you matey, much appreciated 😁👍
@sidwainhouse
Жыл бұрын
Dogs danglies matey!!! 👍👍👍
@QuickBikes
Жыл бұрын
Thank you dude 👍😁
@wibblywobblyidiotvision
Жыл бұрын
That's proper Bernard Matthews, that is.
@QuickBikes
Жыл бұрын
Bit of a turkey then 😂🤣
@basilwatson1
Жыл бұрын
boootiful
@wibblywobblyidiotvision
Жыл бұрын
@@QuickBikes Good lord no. I don't make rude comments about other people's work. Like me old mum used to say - "If you can't find anything nice to say … … It must be one of Del's projects"
@martinwright9238
Жыл бұрын
Nice job suits the bike just right.
@QuickBikes
Жыл бұрын
Thank you matey 😁👍
@rokhnroll
Жыл бұрын
Lovely bit of fabrication there Quicky. Exhaust looks the business. Thanks for posting.
@QuickBikes
Жыл бұрын
Thanks for watching matey 😁👍
@steveadams8799
Жыл бұрын
Nice job Quickie. Looks mint.
@QuickBikes
Жыл бұрын
Thank you dude, much appreciated 😁👍
@lewiscoleman8116
Жыл бұрын
Looking forward to hear what sort of noise it makes now, and see the all important db reading Haha
@QuickBikes
Жыл бұрын
It's very different to the other is zorst and will hopefully be a bit quieterer 😂🤣
@basilwatson1
Жыл бұрын
Sorry, me old Mukka I have but a few questions..Honest questions me lud ....... 1; Why do you need to purge a tig welded pipe but no one does with MIG or arc .....I love Mrs. Tiggy Winkle she is soooo controllable! 2; Why grind, those welds were ok .. however, I prefer the weld and grind cause it makes me look awesome ..... u on the other hand: ARE pretty good in the clutches of old Dame Tig Winkle 3rd and final question; the green box of Jaffa cakes are they Zero calories?
@QuickBikes
Жыл бұрын
No worries dude 😁 I purge the tubes to stop the back side of the weld from oxidising. I've never mig welded stainless, but there won't be any gas on the backside of the weld as it all comes through the torch. If I was to have a go at it, I'd still purge it. My Tig welds aren't the best as I just don't do it often enough. It's alright, but not great so I tend to grind them down. A smooth exhaust pipe always looks best in my book anyways, it just takes a lot longerer to do. The cookies are chocolate chip, a gift from Bernard when he came came down to borrow the Boxford manual, and they're definitely full fat 🤣😂
@itfc3
Жыл бұрын
looks well smart buddy.
@QuickBikes
Жыл бұрын
Thank you matey, much appreciated 😁👍
@johnhutchinson2500
Жыл бұрын
Looks spot on Quickie. Lovely job. You make it look easy. Exaust looks just right
@QuickBikes
Жыл бұрын
Thank you dude, much appreciated 😁👍
@paulglass6134
Жыл бұрын
Really nice piece of work. Just looks right. Well done Quickie.
@QuickBikes
Жыл бұрын
Thank you matey. I think I prefer the look of the other exhaust, but this just fits nicely I reckon 😁👍
@grahamhider3754
Жыл бұрын
Love it
@QuickBikes
Жыл бұрын
Awesome 😁👍
@remfanuk1970
Жыл бұрын
you should be dead pleased with that...looks fantastic mate.
@QuickBikes
Жыл бұрын
I'm quite chuffed actually and think it looks the part 😁👍
@doolytom
Жыл бұрын
Where did u get the 70s organ music for the first bit? Top shelf in the old VHS shop😂 Bike's startin to look very good!
@QuickBikes
Жыл бұрын
Random look up on KZitem matey. The bike is looking good to my eye now 😁👍
@Martin52863
Жыл бұрын
lol, so on average there’s a 2:1 ratio of waffle to work 😉 the exhaust looks lovely.
@QuickBikes
Жыл бұрын
Hehehe... Two words in the whole video... Two words 🤣😂😅
@rickmancr
Жыл бұрын
Every time I watch one of your videos I think "That subframe brace should run from lower on the frame to further back on the seat rails.". Doubtless it will be fine, but it just looks wrong to me, like the seat rail will bend. Not that my opinion matters, I'm not building it. 😊 Perhaps I'll feel better about it when the seat is fitted.
@QuickBikes
Жыл бұрын
Oh it's definitely strong enough matey, but I know what you mean 🤣😂
@zippy350
Жыл бұрын
👍
@QuickBikes
Жыл бұрын
😁
@grahamloftus4449
Жыл бұрын
Pipe looks absolutely mint, you would swear it had been done by a professional welder 👌😉
@QuickBikes
Жыл бұрын
Thank you matey, that's kinda what I do 🤣😂👍
@leovdvelden8428
Жыл бұрын
Professional - i.m.o he is ....
@ooWandereroo
Жыл бұрын
I feel another dyno coming on!
@QuickBikes
Жыл бұрын
3rd May matey 😁👍
@keithf8890
Жыл бұрын
Looks good.I like it.All the best.
@QuickBikes
Жыл бұрын
Thank you matey 👍
@cyelland5064
Жыл бұрын
Looking great 👍. Well done 👏.
@QuickBikes
Жыл бұрын
Thank you matey 😁😊
@Daren67
Жыл бұрын
Perfect mate 👍🏻
@QuickBikes
Жыл бұрын
Thank you matey 😁👍
@jedibiker600
Жыл бұрын
Great work mate, looks spot on. Almost like it just floating. Very neat mate.:-)
@QuickBikes
Жыл бұрын
I like that you can't see the bracket.... Thanks for watching matey 😁👍
@jedibiker600
Жыл бұрын
Always a pleasure to watch mate.:-)
@troywee4774
Жыл бұрын
looks very tidy from here mate! very nice! :)
@QuickBikes
Жыл бұрын
Thank you matey 😁👍
@nicolasandersen7574
Жыл бұрын
Rip and go find Thomas Troest ill be there soner or later
@try-that
Жыл бұрын
Regarding the bracket, for some reason I keep thinking that a small spring sleeved in black or left plain,would look neater and easier for putting exhaust on. But looking at it as I type this, perhaps if you could of put a indent, similar to the brake lever or even a cutout like the rest of the rear set. But its your bike and design so I like it anyway. Is there a PO Box or your unit address to post things to you? Nothing special or expensive 😄but might be useful.
@QuickBikes
Жыл бұрын
Tis all done and dusted now matey. I could cut the welds off, but there's little point. You can reach me via email at simon-quick@hotmail.com for a natter if needed 😁👍
@try-that
Жыл бұрын
@@QuickBikes Yeah I know what you mean, wish I'd thought of it earlier😀 As the saying goes it would be piss boring if we all thought the same. Thanks for the address I'll be in touch.
@bananabrooks3836
Жыл бұрын
Have thoughts turned toward a paint scheme yet?
@QuickBikes
Жыл бұрын
I know exactly what I'm doing there matey 😁👍
@andrewmack2161
Жыл бұрын
It looks good, but it also looks like a boot heel melter...
@QuickBikes
Жыл бұрын
Should be alright I reckon, though you could be right... I have size 11's and ride on the balls of my feet, and my heels clear, but may not be great for bigger flat footed folks 😁
@andrewmack2161
Жыл бұрын
@@QuickBikes When I'm moving I ride on the balls of my feet but in traffic I tend to ride on the arches and use the rear brake a lot. I'm not sure I'd be OK.
@QuickBikes
Жыл бұрын
Should be ok matey. I'll sit on it and show foot placement at some point 👍
@johnrimmer5812
Жыл бұрын
If Carlsberg made exhausts.....?
@QuickBikes
Жыл бұрын
Hehehe 😁👍
@RaceJan
Жыл бұрын
Ohhh come on, don't be like that... let us know how it sounds! 🤪
@QuickBikes
Жыл бұрын
Hehehe... I'm just doing the next video now, so you won't have to wait long matey 👍
@eddiemizen3703
Жыл бұрын
You're been vary nonchalant on the start ov the vid🤣🤣ie it be corse I can, nice exorcist by the way
@QuickBikes
Жыл бұрын
Hehehe.... Looks alright I reckon 😁👍
@MyMetalmike
Жыл бұрын
The right then. Then it was the end of the video😢
@QuickBikes
Жыл бұрын
Hehehe.... No waffle, just work in this one 😂🤣
@MyMetalmike
Жыл бұрын
@@QuickBikes the finish on the link pipe was superb
@QuickBikes
Жыл бұрын
It took a while but came up quite nicely. Skotchbrite wheels are AWESOME 😂🤣
@kevinambrose7074
Жыл бұрын
Excellent job but it must take ages cleaning up the welds and dressing them flush...😮
@QuickBikes
Жыл бұрын
It does matey, longer than you'd think, but I always reckon a smooth exhaust is better than one that's left with welds on show. It just looks cleaner in my book 😁👍
@user-en9zo2ol4z
Жыл бұрын
Please forgive my sudden intrusion. I have just heard the dreadful news of Simon's death. I am so sorry that you have lost such a man.
@fishwars5979
Жыл бұрын
In the year 2025,asbo was finally finished, And then a new project was born and will be finished when I'm pushing up daisy 's.🤣🤣🤣👍🍺🏍🇬🇧.sorry but hurry up.lol.And dont call me matey, fckin hate it,so you will.😂😂😂😂😂
@QuickBikes
Жыл бұрын
😂🤣😂 Right then matey.... 🤣😂 I'm pushing on as much as I can and doing my best
Пікірлер: 83