Imagine what this guy could do with a lift and some room to move around . Huge salute and respect . Love your content . Your ocd makes my ocd feel inadequate 😂
@davian157
Жыл бұрын
80`S DIGITAL MUSIC ... MATT🎼🎵🎶
@georgewarren8814
Жыл бұрын
Hells yeah brother! Love it!
@carlferguson3316
Жыл бұрын
You make everything look almost like it's factory. Can't wait to see this thing going down the road. Also congrats on 100K subs!
@AV131082
9 ай бұрын
I love the music that plays during the videos, it’s so 80’s
@royb.1441
Жыл бұрын
I love love love how factory you made this project look. I remember when you cleaned up this engine I knew it was going to be a beautiful engine bay.
@lsx6.279
Жыл бұрын
Glad to see this project back!!!!!!!
@mikegalgano4567
Жыл бұрын
Love that open header sound. Crank it up!!!
@NotAGarage
Жыл бұрын
She is looking awesome! You are on the next level with video editing and engine swaps!
@stvmassacre
Жыл бұрын
You have the dopest videos my man. You stuck with the 80s theme the whole way through. Love it. Can't wait to see her finished.
@huntermcnair3311
Жыл бұрын
Awesome build!!! I would suggest putting a secondary screen in the catch can. Had one like it before and didn't separate much oil under boost pressure.
@jeffreyshepherd8488
Жыл бұрын
You still got the best montage music 😂
@codyman15294
Жыл бұрын
What a huge milestone! Congrats! Looking forward to the rest of the journey!
@danorourke5184
Жыл бұрын
Congratulations! Looks very oem in the engine bay. Can’t wait to see it driving
@beardedreviews
Жыл бұрын
I see that Godox SL-60!! :) So sweet you got it running man!!!
@dpf1g2fw
Жыл бұрын
That’s awesome Matt! Congrats… all that effort paying off and it’s very inspiring.
@That_Dyna_Guy
Жыл бұрын
Looks good Matt. I think you may have your gas flow too high on the tig. Your torch is a flame thrower! A larger cup will help too, like a 12
@mcraige109
Жыл бұрын
It's ALIVE.. 🤗 thanx for the update. When you get that "T.A." dialed in💻, you'll be straight then. Until then... keep fine tuning. I want to hear that monster roar. ✊🏻
@xslabzxbeaverx
9 ай бұрын
The knowledge and skill you have is insane! Respect to you sir! I wish I had the knowledge
@berem459
Жыл бұрын
Looks great! What an incredible amount of work and attention to detail.
@hailstorm1986
Жыл бұрын
It's alive!!!!!!😇🦅
@Wolfman_3344
Жыл бұрын
Fuggin mint my guy. It’s looking so clean. I’m excited to see more progress.
@jwhittredge
Жыл бұрын
Fantastic video and build, Matt! Thank you for producing the best automotive content on KZitem!! Cant wait for the next video!!
@greddmyles3677
Жыл бұрын
Steam vent usually goes to the radiator at the top hole under or above the top trans hole.. overflow hose still goes to the end under radiator cap
@banecker1
Жыл бұрын
Bro I’m like half way through the video. You are just throwing life goals at me and my 92 bird. What a beautiful build. This video felt very serious, and I have to image it felt damn good to make.
@eazhar
Жыл бұрын
Nice work!!
@GearheadOutlaw
Жыл бұрын
For the steam hose... You could look into 4th Gen f body radiators end cap as they have the port for the steam fed to them at the top of the tank. Not sure about fitment on a 3rd Gen radiator core. Or probably get a aftermarket radiator with the needed Ports?
@danbaker481
Жыл бұрын
Can't wait to see it driving
@kevindangeleit6679
Жыл бұрын
Tap the radiator where that plug is for the 5/8 coolant hose and put a barb fitting in for the steam line.
@ryanmacewen511
Жыл бұрын
Congratulations on 100K! Sweet project so far! Eagerly awaiting the next episode. ;)
@jakewade7388
Жыл бұрын
Heck yeah! 80’s themed music, 3rd Gen, and great skills. What’s not to love? Just awesome content. Keep it coming!
@GrandPitoVic
Жыл бұрын
I've been hitting yards trying to find me a pump. No luck yet. I'm going to head to the yard in Wilmington my next day off. It's like just shy of 2 hours away. ROAD TRIP!!!! LOL.
@PhoenixHavenGarage
Жыл бұрын
15:11 Badass!
@J2A61
Жыл бұрын
Also Lokar makes a dip stick for the trans. Also a shifter.. there a way to wire it up for sport mode using resistance…
@danielalmendrales4667
Жыл бұрын
Wow congrats man. Im so excited for this vid. I’ll probably lose my mind when you test drive it. Finally!!!! Im definitely going to check out your store.
@esperformance2308
Жыл бұрын
It’s alive!!
@LynnTwinCustoms513
Жыл бұрын
I’m just starting out tig welding myself but when the weld is grey like that it means you’re over cooking it. Probably just moving too slow I have a hard time myself with this but practice makes perfect.
@lsxmatt
Жыл бұрын
I’m having a hard time getting the puddle to move, I definitely cooked it trying to weld that header.
@ughmas
Жыл бұрын
my suggestion is learn from the best on youtube there is a plethora of amazing info out there, it takes time and practice but I was able to learn TIG just by watching some of the channels - Weldingtipsandtricks, thefabricationseries are two of the ones that helped me the most. I am finally able to get nice shiny stainless exhaust welds and its a good feeling. You need to make sure to keep the heat input as low as possible (torch height and angle is a big one here) , backpurge the pipes, and make sure you have adequate gas coverage on top, stainless likes bigger lenses with high flow. All that being said so cool to see the TA start up for the first time, amazing progress!!
@wkjeeping9053
Жыл бұрын
Energy suspension are the only bushings I use. They are great for jeeps. I wish I had found them when I had a 82 trans am.
@scottytoohotty7979
Жыл бұрын
It’s alive, IT’S ALIVE!!!
@jeffreyshepherd8488
Жыл бұрын
Hey buddy, that steam line. Pretty sure on the 4th gen/lt1 radiators there's a fitting on the radiator for that to attach to maybe you could swap one in
@KenMrKLC
Жыл бұрын
Congrats on 100K
@lsxmatt
Жыл бұрын
Thanks!
@J2A61
Жыл бұрын
Block that coolant port off completely. You don’t want to run it to your overflow because it’s under pressure and has a good flow of coolant… I just CA glued mine shut after a plug came off and sprayed coolant everywhere. My car runs about 180 all the time no matter what. I’ve hot lapped at the track and it still never goes up… got any other questions just hit me up. After driving my car every weekend for a little over a year now I have had zero problems from the swap it self I will say make sure the transmission has plenty of fluid and checked properly. The 6L80 is sensitive 😂 I run mine a quart over and it’s happy sure wasn’t before
@robertappleyard7053
Жыл бұрын
It’s going to be awesome to see it on the road!
@wolfmanrepairs
Жыл бұрын
WOOOOOOO!!!! Sounds awesome!! Nice work Matt!! 🐺😁
@J2A61
Жыл бұрын
I tried to install electric power steering on my camaro and it didn’t work out 😂 well it did but I didn’t feel safe about it… I was using the Toyota motor though…. I never thought about placing the Volvo set up right there🤔 I’ll try that one soon thanks again Matt 👍🏾👍🏾
@mikepomeroy153
10 ай бұрын
Awesome cars and builds!
@overzealousmaverik
Жыл бұрын
Awesome work!
@douglasmann4802
Жыл бұрын
looking good Matt! love your builds/video!
@m1a1hm
Жыл бұрын
Outstanding work!!! Good way to end my Monday to hear that bad boy fire up.
@user-fe9oy7vk7s
Жыл бұрын
Been waiting for this video for 2 years lol I have an 86 we met at the Mobile on Arthur kill you said you noticed my car in driveway on figurea glad to see the progress brother can't wait for drive video
@ariyanadumon4549
Жыл бұрын
She runs mate, congratulations darlin. You done good.
@geremychubbuck3730
Жыл бұрын
Looking fabulous 👍👍👍
@GrandPitoVic
Жыл бұрын
She's gorgeous brother. Great job!!!!
@tonyr9235
Жыл бұрын
Matt you make it look way too easy! Nice work buddy.
@laiky71
Жыл бұрын
Awesome video! Love the gen 5 stuff
@floressgarage5685
Жыл бұрын
Hey man nice work but just an FYI, you never want to have an o2 sensor below centerline on three pipe. It allows water to collect in it and will ruin it
@darquille
Жыл бұрын
I think that vent line is supposed to go to an expansion tank. You could probably plug it, leave it as is, or add an expansion tank to the system. Id recommend leaving it, because I dont think you have much room for a tank. I mounted mine to the firewall where the AC stuff would go
@DerrickRG91
Жыл бұрын
My 86 TA weeps of jealousy. Great build so far man.
@GrandPitoVic
Жыл бұрын
My Ls3 block will be done next week. YAYA!!!
@thunderheartgaming4416
Жыл бұрын
Have been watching you for a while remember when you added the charge to the Camaro love it both cars an tahiti came along way I'm still stuck between if I wanna leave my 92 rs all original or if I want the ls7 in it
@thunderheartgaming4416
Жыл бұрын
Also wanted to know how much did you pay for the engine
@BenL8257
Жыл бұрын
Well done! Great job making everything functional and look nice!
@imprecise4026
Жыл бұрын
My favorite car that you swapped
@DanMestayer
Жыл бұрын
Ooh that's loud. Good Job...
@REDZ28won
Жыл бұрын
Awesome!
@killemhak2463
7 ай бұрын
i would love to see your very first video dropped on this channel
@RatdogDRB
Жыл бұрын
It breathes!
@malcolmmok08
Жыл бұрын
I can't believe you are reinstalling the stamped steel torque arm. You've upgraded everything else.
@lsxmatt
Жыл бұрын
I have a tubular one in the Camaro and all you hear is gear noise echoing through the torque arm. This is gonna be a daily so I really dont need one.
@TheRenaissanceBuilder
Жыл бұрын
Thats pretty damn cool boss
@Aerozona23
Жыл бұрын
i really like the thumbnail lol
@KenMrKLC
Жыл бұрын
Love the T shirt, RIP Eddie
@MrGFG003
Жыл бұрын
SWEEEEEEEEEEEEEEEEEEEEEEEEET!!!!! That TransAM wants to LIVE!!!! What a great accomplishment, Matt. Congrats! 8:25 Which song is it? Sounds very much badass.
@lsxmatt
Жыл бұрын
Honestly I don’t know! I get everything from epidemic sound
@MrGFG003
Жыл бұрын
@@lsxmatt Thanks Matt, I'll check it out and see if I can find it. If I'm able to find it, I'll post it here, gotta keep rock alive!
@mrphiscal
Жыл бұрын
I think you had to short of a exhust past the o2 sensor that made it diffcult to idle 🤔
@ladariusmastin
Жыл бұрын
Man I been waiting for this for so long sweet ✊🏽💪🏾
@renamamiya158
Жыл бұрын
Love it!
@frankk4787
Жыл бұрын
All you needed was a nerdy friend and possibly a robot of some kind in that montage with that music and you would be ready to take on the local gang leader in a winner takes all race
@d4ve587
Жыл бұрын
You didn't wake the neighbours you woke the dead with that 🤣💪
@GrandPitoVic
Жыл бұрын
HIT IT!!!!!!!
@1gbayfisher
Жыл бұрын
Awesome 👍👍👍
@crivera1728
Жыл бұрын
AutoZone sales radiator hose splices to make swaps easier
@ernestomejia110
Жыл бұрын
where can I get info for the volvo power steering wiring? that's a game changer for accessory brackets on a regular LS swap
@lsxmatt
Жыл бұрын
There’s some info on google but the wiring is really simple. The relay is built in so all you need to do is give the red wire battery + and the black wire ground. On the 3 wire connector the gray wire with the blue stripe gets key on power and thats what turns the pump on. The other two wires aren’t used.
@jayriskit8038
Жыл бұрын
Hell yeah 🙌🏾
@sogood4u489
Жыл бұрын
A fourth gen upper hose will fit.
@sogood4u489
Жыл бұрын
I cant wait for my newest build a 24x conversion with a holly terminator a t56 and super ram 305
@Last2firstFirst2last-mb5mi
Жыл бұрын
Awesome
@vandettabuilds6641
Жыл бұрын
You do the cleanest builds I like it!! I have a 3rd gen LS swapped Camaro. I couldn’t tell where exactly you ran the first line to the catch can?? Was it the passenger side valve cover?? Thank you for the video
@lsxmatt
Жыл бұрын
I run it inline with the vacuum line that goes from the pcv valve to the intake. So on an ls run the hose from valve cover to the IN on the can then a hose from the can on the OUT port to the intake manifold.
@vandettabuilds6641
Жыл бұрын
@@lsxmatt so on the dirty side being drivers side valve over to in on catch can
@mikeeaton9822
Жыл бұрын
Looks like a factory install. What kind of coolant are you running, dexcool is a orange color.
@lsxmatt
Жыл бұрын
Universal coolant. Whenever I put dexcool in my swaps it always turns brown.
@GbodyMedia
Жыл бұрын
Nice
@jennyloughry896
Жыл бұрын
Are you putting on a new aftermarket passenger side fender or do you plan on metal working the OG fender?
@lsxmatt
Жыл бұрын
Probably just throwing the old one back on until I can find a used replacement.
@stevenayala2324
Жыл бұрын
yea all i heard is “shes going around town topless” who dont love that ?
@ryanbarbolt3691
Жыл бұрын
Don't run it with the o2 that close to free air, the computer won't read it right, it'll see a lot more o2 and think it's lean.
@RAWRMotorsports
Жыл бұрын
🤤 man i.miss my third gen 😢😢
@Camaro254
Жыл бұрын
You look like Fran from race proven Motorsports
@jonathant2114
Жыл бұрын
gonna have to change your name to Lxxmatt lmao
@Flitzer514
Жыл бұрын
For welding tutorials, check out Pacific Arc Welding videos.
@juanmena4676
Жыл бұрын
Matt or anyone, I’m going to install c5 z06 rims on my 85 Camaro. Does anyone know what my wheel spacers should be torqued too?
@lsxmatt
Жыл бұрын
I torque mine to the factory wheel spec, I think its 100ft lbs but I’m not sure.
@rkb_8_rah
Жыл бұрын
🙌🏿👏🏿👏🏿👏🏿
@EvansWS6
Жыл бұрын
Why green coolant? just curious.
@lsxmatt
Жыл бұрын
I tried to use Dexcool in the past but it always turns murky brown for some reason.
@SebiDtv
Жыл бұрын
What drive shaft did you use?
@lsxmatt
Жыл бұрын
Had it built by Mr. Driveshaft over in Jersey.
@GrandPitoVic
Жыл бұрын
Where did you get your driveshaft from?
@lsxmatt
Жыл бұрын
Mr. Driveshaft over in Monmouth NJ. He made a new shaft for 400 and had it ready the next day. Highly recommended, he shortened the Chromoly shaft for my Camaro too and that car launches hard.
@GrandPitoVic
Жыл бұрын
Thank you very much.
@GrandPitoVic
Жыл бұрын
Sorry brother. I guess I would have had my answer if I would wait till the end lol.
Пікірлер: 121