Thanks for the exceptionally relaxed walk-through, very helpful!
@TossSong
10 ай бұрын
Thank you for your comment and for tuning in. I’m happy you found this helpful.
@haydenbdennis5274
9 ай бұрын
Thanks so much for the walkthrough. Because of this I was able to resolve a firmware update failure, I kept experiencing. I even sent it back to DJI. They updated it and sent the same osmo pocket 3 back to me. Then the next firmware update came out. Then again I had firmware update failure. I thought no way am I shipping it back out again. I searched forums and support with no real solution. I came across your video and followed it precisely. The absolute first thing I noticed that no one pointed out, not even DJI support, was that the battery handle extension was not connected in your video!😮😅 Ugh! I disconnected the handle and tried and it worked! Hope that helps someone experiencing firmware update failures!
@TossSong
9 ай бұрын
Thank you for your comment and point out that important part, removing the battery handle first. I’m glad this video helped and resolved the problem. 😀
@EdwardKilner
9 ай бұрын
Compared to a different video of the update, this was a pleasure to watch. Thank you.
@TossSong
9 ай бұрын
Thank very much for your comment. I'm glad and happy to hear that this video is decent and helpful. Appreciate it.
@dave20thmay
10 ай бұрын
Thank you for the walk through. Really useful even though I strayed off the path a couple of times. like trying to open the bin, instead of just dragging it across to the mic2. Best Dave
@TossSong
10 ай бұрын
Thank you for your support and your comment. I also did the same thing by trying and opening the bin file (but I edited out). Hope you got it sorted out.
@RameshAnthonym
7 ай бұрын
thank you, so much. The talking speed was perfect. felt like a patient teacher was explaining. Update all three.
@TossSong
7 ай бұрын
Thank you very much for your comment. I’m happy that you tuned in, and that this can help.
@libbyruthgreen7246
2 ай бұрын
Great video!! Thank you for the clear instructions!
@TossSong
2 ай бұрын
Thank you for your comment. I’m happy this was helpful.
@ShoggyPlayTv
10 ай бұрын
Thanks so much for this video. I spent the last three days trying to update the mic 2 until i stumbled on your video and saw you actually just drag the download file into the folder and that did the trick.
@TossSong
10 ай бұрын
Thank you for your comment and for turning in. I’m glad this helped. Hopefully future updates for the Mic could be done through the app too.
@HappyLogicOnline
10 ай бұрын
Thanks Toss, a very helpful guide - especially the bit to do with the microphone.
@TossSong
10 ай бұрын
Thank you for your comment. I’m really happy that I could help with this video.
@KnightsArmory
6 ай бұрын
Perfect video!! Thank you!
@TossSong
6 ай бұрын
Thank you for your comment. I’m glad this helped.
@Visayan751
9 ай бұрын
That was great - straight to the point explanation. Updated my DJI Mic 👍
@TossSong
9 ай бұрын
Appreciate your comment. I’m happy this helped. :)
@オーストラリアで犬と暮らす全豪オ
9 ай бұрын
Thank you I got Mic2 update!
@TossSong
9 ай бұрын
Thank you for your comment. Glad this helped.
@cybermaventech
2 ай бұрын
Thank you so much! This was super helpful!
@TossSong
2 ай бұрын
Thank you for comment. Happy this helped.
@quasiguy
10 ай бұрын
Well done! Thank you. Have you ever thought of recording a relaxation podcast. Because you're super chill delivery really can mellow a guy out!
@TossSong
10 ай бұрын
Thank you for your comment. Appreciate your saying so, it would be interesting to record relaxation podcast. I would have to look into what I could talk about. Thank you again. 🙏😀
@whoisrussell
10 ай бұрын
Thank you! I have no idea i had to update my mic.
@TossSong
10 ай бұрын
Thank you for your comment. I’m glad this video helped. :)
@jrperezphotography
9 ай бұрын
Outstanding, well done and great pace. Thank You
@TossSong
9 ай бұрын
Thank you for your comment and checking out my video! I happy you found it helpful.:)
@lampiditesla
8 ай бұрын
Helpful, thanks
@TossSong
8 ай бұрын
Thank you for your comment. I’m happy this helped.
@davidbarry8433
10 ай бұрын
thank you so much. Brilliant and well explained instructions
@TossSong
10 ай бұрын
Thank you very much for tuning in and for your comment. Glad this could help.
@rjbrandy1199
10 ай бұрын
Thank you for the video! Helped me a lot to update!
@TossSong
10 ай бұрын
Thank you for your comment. I’m happy this video helped.
@MapleRidgeHomestead
10 ай бұрын
great info, thanks!
@TossSong
10 ай бұрын
Thank you for your comment. Glad this video helped.
@JuicyHero
10 ай бұрын
The battery handle is automatically updated to the latest firmware if it is connected while doing the firmware update for the pocket itself.
@TossSong
10 ай бұрын
Thank you for sharing this, I didn’t know. I like it, even quicker.
@adz-ql6kv
10 ай бұрын
what does the new firmware do to the battery handle?
@TossSong
10 ай бұрын
I couldn’t find any notes on DJI website. I assume for the battery to charge properly without issues.
@allstarbury
10 ай бұрын
@@TossSongaccording to infos suppport streaming 1080p and 4k 10bit normal mode besides hlg hdr and d log .All 10bit which is astonishing for editors
@TossSong
10 ай бұрын
Yes, this is quite a big update. I’m still testing and comparing to how it was, but loving it so far. Thank you for your comment b
@CaoTuan9999
9 ай бұрын
Thank You very much 😊 subscribed
@TossSong
9 ай бұрын
Thank you for watching and your support! I'm glad you found this video helpful.
@matchmediafilms
9 ай бұрын
Thank you very much!!
@TossSong
9 ай бұрын
Thank you, I’m happy to know this helped.
@oldschoolgaming4763
5 ай бұрын
Great and informative video!
@TossSong
5 ай бұрын
Thank you for your comment. Happy this helped.
@michaelmarcano9200
9 ай бұрын
This is exactly what I needed thank you!
@TossSong
9 ай бұрын
Thank you for checking out my video! I hope you found it helpful.
@michaelmarcano9200
9 ай бұрын
@@TossSong I definitely did!
@poco_films
10 ай бұрын
Thanks for the helpful guide video. My question is - How could we update the Mic 2 if we don't have computer or laptop?
@TossSong
10 ай бұрын
Actually, it should work the same way with an iPad or a tablet-if the bin file can be downloaded onto it. Let me know if manage to do it. Thank you again for your comment.
@TheXpatx
10 ай бұрын
@@TossSong I think the question was is there a way to update the DJI mic without a computer or laptop?
@TossSong
10 ай бұрын
Thanks, got it. In that case, I don’t know. I’m sure DJI would eventually implement the update method for the Mic through the Mimo app also. Hopefully soon.
@poco_films
10 ай бұрын
@@TheXpatx Correct. I only have a smartphone.
@TossSong
10 ай бұрын
I see. I’m sure eventually DJI have to implement the update through the app, for this to be truly portable experience.
@PauloCarvalho
7 ай бұрын
The issue? Well while using the receiver with either transmitter and shooting video with the factory IPhone camera/video app it will not transfer the audio to the iPhone, you can see the level meter from the mic(s) but it still records with the iPhone built in mic.
@TossSong
7 ай бұрын
Hi, thanks for sharing your experience. Hope someone can assist in providing the answer to this issue. For me, I use the Mic 2 but transfer everything off the SD card.
@zeynepozdemir.
10 ай бұрын
Thank you thank you thank youuu
@TossSong
10 ай бұрын
Thank you, I’m glad this video helped.
@enriquemartin8655
10 ай бұрын
Thank you for your presentation. I understand that prior to using the device, you must register by cellphone? Is this true?
@TossSong
10 ай бұрын
Hi, thank you for your comment. For what I know, you would have to register to activate it. However, I believe you could still use it without having to. But they recommend that you should.
@fgotahiti
10 ай бұрын
Hi Thanks, crystal clear! Just a quick and stupid question please: When the firmware update is done on the Mic transmitter, do we leave the DL file in the root folder ...or do we can delete it?
@TossSong
10 ай бұрын
Hi, thank you for your comment. There’s no mentioning in their Release Notes. However, when the next Mic update is released, you would have to delete it for the new one. For me, I just leave it there until then since it hasn’t affected anything. Hope that helps.
@medakidz6319
10 ай бұрын
Thank You 👍👍👍
@TossSong
10 ай бұрын
Thank you, I’m happy that you tuned in.
@RWPOV
10 ай бұрын
I encountered an issue with the installation process (no response at all) switching to a different browser to download the file resolved it. Just sharing this with everyone here
@TossSong
10 ай бұрын
Thank you for sharing and for your comment. Glad you got it resolved. Hope this comment will help others with the same issue.
@m.y.o.b6319
9 ай бұрын
I don’t have a computer, can I use my iPad to do all these updates?
@TossSong
9 ай бұрын
Thanks for reaching out. Yes, you can as long as it’s can transfer file. Let me know how it goes.
@jonahkaiguam
10 ай бұрын
I downloaded the bin file from the site to my phone, plugged in the mic 2 to my Samsung S23 Ultra's usb-c port, powered on the mic 2 and dropped the bin file into the root directory of the mic 2 and once I disconnected from the phone, it updated
@TossSong
10 ай бұрын
Thank you for your comment and for sharing. I was wondering about mobile devices, I assume that it would work as along as the bin file can be downloaded and transferred. Thank you for confirming it. Hope people can read your comment if they want to try with their mobile devices. Thank you again.
@tykong
10 ай бұрын
Thanks for sharing this info, very helpful. What magnetic cable are you using with the transmitter?
@dave20thmay
10 ай бұрын
Just seen an advert, looks like a Static 360º cable. Best Dave
@TossSong
10 ай бұрын
Thank you for your comment. I got it from Amazon, it’s the “USB C Magnetic Adapter (2 Pack)”. They’re cheaper on AliExpress, but long wait time when shipped. Hope that helps.
@TossSong
10 ай бұрын
Thank you for commenting. It’s really useful. It’s a “USB C Magnetic Adapter” that I got from Amazon. It attaches on the ends of a USB-C cable. You could find it for cheap on AliExpress. Hope you found this video helpful. Thank you again.
@RobertoSteveLou
10 ай бұрын
Awesome video, thanks! all like the video went well except for the last point, the battery handle. It wont update automatically. How can I update it please?
@TossSong
10 ай бұрын
Hi, if you updated the camera with the battery handle attached, it was already updated along with the camera. Just check to firmware number to confirm. Let me know how it goes. Thanks.
@RobertoSteveLou
10 ай бұрын
@@TossSong No I didnt.
@TossSong
10 ай бұрын
Double check the firmware number on Both the camera and the battery handle by attaching it. (As you know, the camera needed to be updated first). If anything else, I wouldn’t know what happened. Hopefully you tried everything, like draining the batteries (both the cam and the handle) and recharging them. And check everything.
@hussTennis
10 ай бұрын
it helps thanks
@TossSong
10 ай бұрын
Thank you for tuning in.
@spookwackadoo
6 ай бұрын
Anyone else having the issue where your pc or Mac doesn’t even recognize the mic? Whenever I plug it in to a computer, the mic vibrates and blinks a green light, but it won’t let me access any files. The “no name” drive doesn’t even appear
@TossSong
6 ай бұрын
Hi, thanks for reaching out. I assume you’ve tried restarting the computer already. And using a data transferable cable. Let me know. Hopefully someone having the same issue can chime in.
@biggooseadventures
9 ай бұрын
Thank you 🙏
@TossSong
9 ай бұрын
Thank you for your comment. Glad this helped.
@biggooseadventures
9 ай бұрын
You made my life easy thank you
@TossSong
9 ай бұрын
Thank you, I’m happy this video helped.
@StephenBillVideoEditing
10 ай бұрын
Thanks
@TossSong
10 ай бұрын
Thank you for your comment.
@MichaelMitchellPhotographer
10 ай бұрын
Thanks!!
@TossSong
10 ай бұрын
Thank you for tuning in.
@cinevideobelgium5788
10 ай бұрын
Hi, I tried to update the Mic2 but didn't succeed. I first updated the Pocket 3. That was working nicely. The Mic2 after my attempt to update, gives a Green flashing Light and can not connect to the Pocket 3 anymore! I tried 3 times to update. No way to solve the problem. Can you help me to fix this?
@TossSong
10 ай бұрын
Hi, I would plug the Mic 2 in again. And then delete the old bin file that you transferred in. And start again-but make sure you drag or transfer into the root directory of the Mic drive. Do let me know how it goes. Hope this works. Thank you for your comment.
@Penguinsix
10 ай бұрын
The issue for me was that I didn't 'EJECT' the No Name microphone before unplugging it. Once I clicked EJECT and then unplugged, I got the update.
@TossSong
10 ай бұрын
Great, glad you got it working. I believe even without ejecting it (after bin file transferred), the Mic should still go into update mode with alternating red and green lights. But no matter, you still got it working. Thanks for your input and for your comment.
@BlairAir
10 ай бұрын
You forgot how to update the usb cable, and the magnet for the DJI Mic 2 😂 😅. I got the soft case updated though. It's now a briefcase 💼 😳 Just kidding. Thanks for helping folks that aren't technically savvy.
@TossSong
10 ай бұрын
Thank you for your comment. I know, I’ve using the “USB-C magnet adapters” for everything now. They are so convenient. I got them off Amazon. They are cheaper on AliExpress. Anyway, I’m glad this video helped. 😀👍
@adz-ql6kv
10 ай бұрын
I've updated the deadcat / wind shield on the microphone... the hairs are much longer now.
@JoATTech
10 ай бұрын
Mimo app claims it can also update the transmitter when it's connected to DJI Pocket3 during firmware update. I read it after I updated it 🤣🤣🤣🤣 Going the USB way then :D
@TossSong
10 ай бұрын
Thanks for your comment. That’s interesting (possibly for future update releases). Because even the “DJI Release Notes,” they themselves mention it has to be done through a computer. I’ll be looking into to this, it would be so convenient through the app.
@AmmaInaNewCity
6 ай бұрын
Thank you so much! Your video was a huge help!
@TossSong
6 ай бұрын
Thank you for your comment. I’m very glad this helped.
Пікірлер: 114