As someone who is from the PNW who is should for choice of amazing bike companies, Marin is my favorite bike manufacturer outside of my corner of the world. The changes on this bike are well done and make this bike even more amazing.
@MichalSzul
Жыл бұрын
Rear stiffness does not depend on axle clamping system but hub itself. If internal axle and hub construction would be stiff then with QR clamping system it would also be stiff. The only downside to QR in my opinion is necessity to reposition brake caliper every time you remove the wheel as this kind of wheel mounting introduce variance in wheel position every time it is installed.
@ridingwithjoshandwendy
Жыл бұрын
That definitely seems to make sense, but I believe there’s quite a few studies showing otherwise. I think my biggest complaint with the 141QR standard is how hard it is to find replacement hubs if/when you damage the wheel
@MichalSzul
Жыл бұрын
@@ridingwithjoshandwendy that is a long topic ;) Just take a look at hub cross section to see what is real axle there. Then you will understand that those kind of "studies" are there to sell you stuff by making you belive that your old stuff is not good anymore.
@ridingwithjoshandwendy
Жыл бұрын
Haha alright, I appreciate the input, I’ll definitely look into it!
@b17derpy
Жыл бұрын
@@ridingwithjoshandwendyMost high end hub manufacturers (DT, Industry Nine, Onyx to name a few) have end caps you can change out. Since 141xQR is boost, all you have to do is order 12mm thru axle end caps and swap them with the QR end caps. Just make sure said hub manufacturer actually makes hubs that can do that, but the name brands usually do. So when ordering new wheels, just look for a 148 wheel with hubs that have changeable end caps and you’re golden.
@ridingwithjoshandwendy
Жыл бұрын
True, hope does as well! But for a rider on a budget (as I’m guessing most SQ1 buyers are) being forced to buy from a handful of high-end manufacturers is a bummer
@jurisx85
Жыл бұрын
Yeah, I started saving for this bike the minute I heard about it’s release. It looks awsome. I do prefer 65 hta, though but no complaints.
@ridingwithjoshandwendy
Жыл бұрын
I agree, you could always reduce the travel by 10 mm, but then you’d loose the starch increase
@dc1890
5 ай бұрын
41 y/o getting my first trail bike. Going crazy of what to get for my first bike. I'm looking to learn and get into trail biking, I don't know if I can make jumps as I'm a bit old and don't want to die on the tracks... just too old to break bones but my gut keeps taking me back to the SQ1. I was told to just get a full suspension and have been looking at the T6 from Polygon. Can you please advise; will I get rekt on this bike if I'm new to mountain/trail biking? Thanks so much for your videos. Been watching your reviews.
@ridingwithjoshandwendy
5 ай бұрын
Stoked to hear your getting into riding, welcome to the family! As you’ve probably found out by now I have a bit of a bias towards hardtails, but a big reason for that is because of the added challenge and more “raw” riding feel. But if you want to get a bike that will get you up to speed quick then your friends may be right about the FS, and the Siskiu T6 is by far the best value option! My wife is actually a BikesOnline ambassador, so if you by with this link we’ll get a small kickback 🤙 bikesonline-usa.sjv.io/ZQEA0k
@h3g98fn
Жыл бұрын
The Oneup dropper v2 has a 30.9mm option that goes up to 240mm so that should be a good upgrade
@ridingwithjoshandwendy
Жыл бұрын
Oh nice, thanks for the info!
@Tannervmtb
Жыл бұрын
Fun fact on the dropper complaint. Almost every company making droppers sizes their bushings and post stanchion diameter based off the 30.9 size. So as far as I know, 31.6 posts are no stiffer or more reliable
@ridingwithjoshandwendy
Жыл бұрын
Interesting, that’s good to know! I’ve heard otherwise from some big-name reviewers, but maybe they were just speculating
@bxmario
Жыл бұрын
I've been on my 2021 sq1 over forked with a 160 lyrik ultimate and now thanks to this video 😂 just ordered the sq3 frame for only 549, swapping all the parts. Now I can run a longer dropper. Looking forward to the short seat tube, had a few bad cases with the sq1 frame
@ridingwithjoshandwendy
Жыл бұрын
That’ll be sick!!! Just keep in mind you’ll need a new back wheel, or at least hub, to fit the new frame
@bxmario
Жыл бұрын
Yeah good point. Looking at a decent wheelset/hubs with more engagement points than the old sq1 wheels for sure. Thanks and great review!
@killgates9890
Жыл бұрын
This is perfect for the right kind of flex for bunnyhop and jumps
@dkarleone3687
Жыл бұрын
Awesome changes to the geometry in my opinion. I was thinking of buying a Kona Honzo ESD but it’s kinda hard to beat that price on the SQ3 complete.
@kbeightyseven1783
Жыл бұрын
Dude the honzo esd is a far better frame, alloy is not a good material for a hardtail
@ridingwithjoshandwendy
Жыл бұрын
Steel is definitely real haha! But if built well aluminum can be great too, just look at Commencal, Banshee, Trek, Nukeproof, and Specialized - all brands that make pretty rad aggressive hardtail, offered only in aluminum. The ESD is a great bike, but with the 65 mm BB drop and 63 degree HTA, it’s more of a plow bike than the playful San Quentin
@kbeightyseven1783
Жыл бұрын
@@ridingwithjoshandwendy unfortunately I don’t even look at them anymore, broke a chain stay on a Marin, and cracked a chainstay on a nukeproof, the problem with alloy is it will always fatigue and they can’t allow for any flex as that will just weaken it, for a hardtail aluminium is just a bad material, CrMo is so much stronger yet can be designed to be compliant with out any worries of fatigue. Aluminium is fantastic for full suspension, but the rear of a hardtail constantly vibrating is just a bad idea for alloy, big brands make them because they are cheap and easy to mass produce
@ridingwithjoshandwendy
Жыл бұрын
Sorry to hear that! I just finished building up my new steel frame today, video on that build should be out next week!
@kbeightyseven1783
Жыл бұрын
@@ridingwithjoshandwendy can’t wait 🤘
@ridingwithjoshandwendy
Жыл бұрын
Wendy and I are super stoked to announce that we are now partnering with bikesonline.com! If you 're liking what you see about the 2023 Marin San Quentin and are thinking about making a purchase, doing so through the affiliate link below with help our channel out! Thanks 🤙 bikesonline-usa.sjv.io/9gGj5Q
@BenYorkeMrHardtail
Жыл бұрын
looks epic! I'm buying this 100P!
@ridingwithjoshandwendy
Жыл бұрын
My thoughts exactly!!
@marin_bikes
Жыл бұрын
Awesome
@ridingwithjoshandwendy
Жыл бұрын
Thank you!! Hope to get on the frame one day soon 🤙
@archie68x
Жыл бұрын
Great value bike @ $2999 Au opposed to $4400 Au I paid for my Kona Honzo ESD but the Honzo is steel , upspect on components , adjustable chain stay & 29 “ wheels which makes it a more aggressive HT & perfect for the variety of riding including DH for me 😎🤟 As I said the Marin is a great value for money bike 👍👍
@ridingwithjoshandwendy
Жыл бұрын
I definitely agree on the upgraded spec and higher cost of steel tubing, but I actually prefer 27.5 as I like a more playful, DJ-like hardtail. The honzo is pretty dang rad though!!
@ekims_echoes
Жыл бұрын
To say that the SQ1 frame is "essentially useless" is a bit of hyperbole because it's absolutely a worthwhile bike even with that QR 141. That said, I don't understand why they didn't do the same treatment with the SQ1 as they did with the Rift Zone 1 that can be converted form QR to thru axle.
@ridingwithjoshandwendy
Жыл бұрын
That’s fair, I was definitely exaggerating the point. Still a great bike and one of the few (I’d only) truly aggressive hardtails you can get for less than $1,000. Just a bummer that the frame isn’t as future proof as it could have been
@keken_25_pr48
Жыл бұрын
I Have a 2022) St Quentin 1 since last summer my progress riding this bike got me stoke. As a 120lbs rider i don't think the QR may affect me too much. I see all the good thing on the new one and I'm kind of jealous lol but I'm fine with my do it all Small Quentin 1 👌
@ridingwithjoshandwendy
Жыл бұрын
Right on, glad to hear you’re stoked on! I’ve heard the seat tube height is better proportioned on the smaller frames too, so that’s good! If and when you need to replace your back wheel I know both DT Swiss and Hope make adapters so you can run their standard boost hubs with the 141 QR. I bought a universal adapter off Amazon that slid into the 12mm hub so you could run the QR axel through it. It always sketched me out a bit, and only rode it like that for about a month until my new frame arrived, but it got the job done!
@ridingwithjoshandwendy
Жыл бұрын
Here it is if you’re ever interested: corki 12mm to 9mm 12mm to 10mm QR Adapter Thru Axle Hub Quick Release 100/135/142/148mm Bicycle Front Wheel Hub Adapter a.co/d/2xnObp5
@keken_25_pr48
Жыл бұрын
@@ridingwithjoshandwendyoh thanks man i was looking for some upgrade on the future so i will take a look! But so far so good. Enjoy your St Quentin!
@TrailFeatures
Жыл бұрын
The 141qr drops make *no sense* when Marin already solved this problem with the Riftzone 1 where they have a thread in adapter that converts a 148 dropout to a 141. Like, just use that.
@ridingwithjoshandwendy
Жыл бұрын
That’s cool! Didn’t know that was the case, thanks for letting me know!
@mtbboy1993
Жыл бұрын
0:16 I see what you mean with the seat tube and top tube. Way too high, for some reason some brands keep having worse standover height on bigger bikes. I did not look up the other sizes. but if I were to buy one I would have. you definitely made the right choice by selling it. I hope the weird top tube and seat tube thing brands do on some sizes will end, aim for short seat tube, low stand over. I think Marin did a mistake, they just worked with the ridder on one size, got that dialed for him, then other sizes were compromised. They should add a normal brake mount instead of flat mount. also replaceable barrel nuts, so you can replace them, and won't ruin threads in the brake mount posts on the frame. But this is a rare feature, only few bike brands have it, and only few big brands did it on just few bikes. Nicolai has done it for years. Cube did it on a XC bike once, but they don't anymore.
@ridingwithjoshandwendy
Жыл бұрын
They’re actually post mount brakes, just mounted inside the rear triangle
@mtbboy1993
Жыл бұрын
@@ridingwithjoshandwendy yea but still not optimal. but I guess it's less exposed.
@alexlamy1271
Жыл бұрын
I really love marin Sanquentin 3
@ridingwithjoshandwendy
Жыл бұрын
Such a rad bike, especially for the value!!
@josehurtado7822
Жыл бұрын
I know you have a rsd middle child ( or am I wrong ?😂) I ready like your video (thank you) and I would like to know what would you choose the rsd md v2 or the Marin San Quentin 3 ?? And why? please . I hope I’m not asking a lot 😂 but I’m looking for purchase any one of them so I need some help to take a desition. I have never rode any of them
@ridingwithjoshandwendy
Жыл бұрын
I do! Tell me a little more about what you’re looking to do with the bike/your riding style/budget and I’ll let you know!
@josehurtado7822
Жыл бұрын
@@ridingwithjoshandwendy I’m willing to pay 3000 or less 😂 for a bike . I have a ripmo af. It’s such a nice bike does good in uphill, super good in downhill (the best) it’s a good all around mtb . This time I’m looking more for something more fun something more lively and light weight . I’m living in Las Vegas. Where is more Gnarly, rock and dry but still fun. Im looking more for jumps, wheelies, Manuals , jumps kind of BMX style … so I was thinking about purchase the Ripley af, but I do prefer a Hardtail … I hope 🤞 make sense what I’m trying to explain 😂 I would say I’m looking for a second bike in case something happens with my Rimpo af , but you never know probably I will love to ride something more lighter and more playful .
@Bueller611
Жыл бұрын
@jose hurtado i also have a ripmo af... i ride a Norco Torrent (aggressive steel hard tail) for tamer trails and its way more fun than a full suspension.
@josehurtado7822
Жыл бұрын
@@Bueller611 exactly that what I’m looking for . Something a little bit more lighter in uphill just a little bit you know !! Because again I love the ripmo specially when I go to bootleg canyon and I do Boy Scout, Girl Scout, pow , snake back .sooo norco ?? 🤔
@ridingwithjoshandwendy
Жыл бұрын
Oh man, both of those bikes would be a great fit for you then! I think I’d have to give it to the Middlechild though, it’s definitely the more versatile bike, it can fit 27.5 or 29” wheels and has sliding dropouts to adjust the chainstay length, which you can shorten all the way to 415 millimeters, making it feel like basically a dirt jumper haha. You can get 5% off by using the code Josh5%off on the RSD website. You’ll love either bike though, let me know what you end up going with!
@mloskot
Жыл бұрын
Josh, could you tell what is your height and which size of SQ 3 frame would/did you pick? Big kudos for the thorough review!
@ridingwithjoshandwendy
Жыл бұрын
For sure!! I’m 6’1”, 210 lbs kitted up. If you’re talking about the new frame I’d go XL; you’d still have the playfulness of the short chainstay and low seat tube, with the stability of the long front end
@mloskot
Жыл бұрын
@@ridingwithjoshandwendy Thank you! I'm 5′ 10″ cm but with shorter arms and I'm wondering if I should go for L or size down to M. I'm currently on Marin Nail Trail 7 from 2017 and it is size M, but sizing has changed quite a bit with the advent of the modern geometries, I guess.
@ridingwithjoshandwendy
Жыл бұрын
Sounds like you’re like me; right in between sizes. The medium will be a more maneuverable bike, making it easier for jumping/jibbing, and the larger will be more stable at high speed, and potentially more comfortable on longer rides
@mloskot
Жыл бұрын
Thanks for the tip. All the best!
@seth_867
Жыл бұрын
@@mloskotI’m the same height. I bought a 23 sq1. In a large. For me it feels perfect. The other comment was right. Get a med if you want a more nimble dirt jumper but if you want a do it all trail go for a large
@MartinTeerly
10 ай бұрын
141mm wheel is a boost with QR end caps. Most boost wheels can be converted to 141mm
@ridingwithjoshandwendy
9 ай бұрын
My understanding is that’s only a few brands that sell compatible end caps
@MartinTeerly
9 ай бұрын
@@ridingwithjoshandwendy if your hub has end caps 12mm through it means they also make 135mm QR. These end caps fit your 148mm boost hub.
@jamesallenmainieri
Жыл бұрын
Hope makes great wheels and their own adapters for 141, as well as the bontrager 108t rapid engagement
@ridingwithjoshandwendy
Жыл бұрын
I believe DT Swiss and Qualy Wheels as well, but that’s it
@mtbboy1993
Жыл бұрын
9:56 Much better than Deore, which has servo Wave, which means reach effects the power, but with these the lever blade is connected directly to the pivot at the push rod, so adjusting the reach won't effect power delivery, how far the piston can be pushed. So Deore brakes are absurd, cus if you have such mechanism, you need a counter adjustment.
@outsidebrendan
Жыл бұрын
I have the new base level 4 pistol brakes and as you explained I think they feel better than the servo wave levers. I like them better than their more expensive brakes.
@mtbboy1993
Жыл бұрын
@@outsidebrendan Shimano offers this with the XTR Race model. but then you have the fragile ceramic pistons. Race model doesn't have any knobs nor freestroke, just reach adjustment in the same spot as MT200 for example.
@ridingwithjoshandwendy
Жыл бұрын
Thanks for the comment, big fan of your channel! That’s good to hear, I’ll try do get some newer non-servo brakes and give them another try!
@mellissanash7517
Жыл бұрын
Do a video like this for the Kona Unit and Marin El Roy please.
@ridingwithjoshandwendy
Жыл бұрын
Great idea, I’ll see what I can do!!
@mellissanash7517
Жыл бұрын
@@ridingwithjoshandwendy Thank you!
Жыл бұрын
I think you can upgrade the 141qr to a 148 throu axle set up. They had the same set up on some Rift Zones (might been another model). You just bought a new hanger and a new insert on the brake side. 141qr is just 148 with different endcaps.
@ridingwithjoshandwendy
Жыл бұрын
Interesting, sadly can’t do that on the San Quentin as the dropout is welded to the frame. I did run an axel adapter on mine for about a month when a bought a new wheel, before getting on my new frame. It worked but I was always a little nervous haha
@Shred_Tube
Жыл бұрын
@@ridingwithjoshandwendy The Rift Zone has welded dropouts too, you just need to change the hub and end caps i believe
@ridingwithjoshandwendy
Жыл бұрын
True, I thought he meant there was an adapter for the frame/dropouts
@arthurarsekey6634
Жыл бұрын
Have a Titus Loco Moto titanium hardtail which looks identical shape to that - 77 degree seat angle, 62 degree head and 150 mm travel fork. It rides better than my full suss in every department.
@ridingwithjoshandwendy
Жыл бұрын
Nice! Those look so rad, and such a great value for a titanium bike!
@arthurarsekey6634
Жыл бұрын
@@ridingwithjoshandwendy best mountain bike I have ever ridden
@Jaxon-r3u
11 ай бұрын
Ordered the sq3 i had the 2021
@ridingwithjoshandwendy
10 ай бұрын
Nice!! Did you get the 27.5" version or the new 29" model?
@Sergei-ph2it
Жыл бұрын
Hello! Thank you for nice and detailed video :) I'm choosing my first bike and I'm lost of how to determine which size to choose? I'm 185cm height so should it be L or XL for this bike?
@ridingwithjoshandwendy
Жыл бұрын
No problem man! You’re right between sizes, just like me. On the San Quentin with the short and steep seat tube I’d recommend sizing up to the XL. I’ve got a few more videos with my experience riding that on my channel, I think they’ll be helpful!
@Sergei-ph2it
Жыл бұрын
@@ridingwithjoshandwendy I see, I thought of XL too. I will check other videos! Thanks😊
@ridingwithjoshandwendy
Жыл бұрын
No problem! And if you end up buying it would help our channel out if you purchase it through our affiliate link 🤙 bikesonline-usa.sjv.io/Y9DvQq
@nickyaoe2de
Жыл бұрын
thought Flow Snap from Veetire are tubeless ready.
@ridingwithjoshandwendy
Жыл бұрын
They may make some that are, but to the best of my knowledge the ones specced on the SQ 1&2 are wire beads, and therefore not tubeless compatible
@SharrodVisuals
Жыл бұрын
Is it possible to get the San Quentin 1 and upgrade to the marzocchi bomber z2 fork on the San Quentin 3 for the extra travel down the track? Or is it incompatible. Thanks
@ridingwithjoshandwendy
Жыл бұрын
Definitely comparable! The frames can accept up to a 150 mm fork
@madcapper6
Жыл бұрын
As everything is trial and error, how does someone practice something like @2:15 without breaking bones?
@ridingwithjoshandwendy
Жыл бұрын
Foam pits help haha!
@mcmtb2519
Жыл бұрын
Great video, about to pull the trigger on a new Hardtail build. Unfortunately Marin website says "out of stock"
@ridingwithjoshandwendy
Жыл бұрын
Ya, which is weird! I wonder if they’re still waiting on shipments to arrive-I can’t imagine them selling out that fast!
@mcmtb2519
Жыл бұрын
I’m hoping they become available sooner than later. Otherwise I’m going to pick up the Roscoe 2023 Size M/L. I don’t use the bottle cage that’s on the post. Already measured that I could put a 170 dropper into it if I need. But like you, I treat my Hardtail like a BMX, really appreciate how low I can drop my seat on that new SQ 3
@ridingwithjoshandwendy
Жыл бұрын
Right on! Another option I’d recommend then is the Nukeproof Scout. It’s closer to the San Quentin in geometry and has 27.5” wheels, which if you’re looking for a more playful fee makes a pretty big difference in my opinion. They offer 4 different build options, ranging from $1,600-$3,800. Here’s the link: us.nukeproof.com/collections/hardtail?wheel_size=Wheel+Size%3A+27.5%22
@ridingwithjoshandwendy
Жыл бұрын
As of right now Nukeproof lists these as out of stock as well, but seeing as they’ve been on the market for a while I’m sure you could find some good used options
@scubby1080
Жыл бұрын
With the new geo, do you think would be a good trail bike, even if I'm not doing a lot of jumps?
@ridingwithjoshandwendy
Жыл бұрын
If you’re looking to do more aggressive trail/enduro riding I think it’d be great!! It might be a bit much for me general trail riding; the 64 degree HTA and burly Maxxis Assegai tires it’s speced with are definitely more suited for steep, fast terrain
@erraldstyler
Жыл бұрын
still QR dropouts on the sq1... guess my next HT will be a Nukeproof Scout or even a Canyon Stoic. bought a SQ1 2020 when i was still a noob, kinda feel ripped off
@ridingwithjoshandwendy
Жыл бұрын
Ya, it’s a bummer. The SQ3 is still a great value though! Nukeproof has a ton of rad builds though, and a super dialed frame!!
@jimmysavage258
Жыл бұрын
I’m between the San Quentin 3, the El Roy, and Trek Roscoe 8
@ridingwithjoshandwendy
Жыл бұрын
3 very different bikes! I’d go with the El Roy if you want a more enduro-focused (fast, planted) bike and the San Quentin if you want a something the feels more akin to a dirt jumper (poppy, agile). The Roscoe is a great bike too, probably the closest to a traditional trail hardtail
@MikeKraemer87
Жыл бұрын
Check out Hardtail Party, he has reviews on all of these except the SQ. I have personally had a SQ3 and im looking forward to trying out the new geo on these. If you want a more enduro focused hard tail, id suggest going with the Honzo ESD, way better than the El Roy. Roscoe 8 is kind of...meh? Lol.
@ridingwithjoshandwendy
Жыл бұрын
All suggestions I’d agree with 🤙
@andrewbrown8927
Жыл бұрын
I really love the 2023 roscoe 8
@MikeKraemer87
Жыл бұрын
@@andrewbrown8927 Do you own one? Theyre not bad bikes by any means, the 2023 has somewhat more modern geo now, its not perfect, but its getting closer.
@machyne82
Жыл бұрын
I overforked my 2019 SQ 2 to 160mm 27.5 Fox 26. Boy was that a mistake. It rode like crap, but the low stack bothered me that much.
@ridingwithjoshandwendy
Жыл бұрын
I feel you! I had a 150 on mine. The seat tube is what really killed me though (almost literally lol), I nutted myself so many times 😂
@bxmario
Жыл бұрын
I put a lyruk ultimate 160mm on mine and it made the head angle 63 degrees. I love it though. Now I'm buying the 2023 sq3 frame and swapping parts can't wait
@andrewsiasparks
Жыл бұрын
They should make a steel one
@ridingwithjoshandwendy
Жыл бұрын
That would be sick!! They have the El Roy, which is Steel, but built for a very different purpose
@andrewsiasparks
Жыл бұрын
@@ridingwithjoshandwendy the el Roy also has a longer seet tube than desired . I also like the bikes that look and ride like big dirtjumpers
@ridingwithjoshandwendy
Жыл бұрын
Sounds like we’re on the same page haha! Ya it’d be rad if they made a steel SQ!
@bikesonline
Жыл бұрын
Awesome video! We have been super stoked with the new San Quentin 1. Did you have an email we could contact you on? We would love to see how we could help the channel :)
@ridingwithjoshandwendy
Жыл бұрын
Likewise, such rad bikes! I’d love to work with you guys, my email is vanlifemedia1@gmail.com
@bikesonline
Жыл бұрын
@@ridingwithjoshandwendy sorry I didn't get back to you sooner! Email sent :)
@ridingwithjoshandwendy
Жыл бұрын
Man, wish I saw this earlier! I literally just posted a video featuring the Xtrada 7 today haha! Thanks for reaching back out though; I’ll reply in the email!
@mtbboy1993
Жыл бұрын
10:14 I am curious what was so garbage about them. but I can think of some things: the plastic cover, that's absurd, plastic covers sohuld not be on a brake, no matter the price class. I tried these or similar on a local rider's bike. the feel was normal, nice power delivery, no silly servo wave in the way of power if adjusted for small hands. but I've never tried them long term. but the plastic thing screams failure, issues. Keep in mind brake pads make a huge difference, I don't remember which ones I tried, but I had mechanical TRP Spyke, they had red semi metallic pads, they bite well. I use Formula Cura 4, which I am happy with.
@ridingwithjoshandwendy
Жыл бұрын
Very weak, inconsistent bite point, and no lever adjustment. The speced rotors are resin only. But I upgraded to some used Guide REs and never looked back haha
@mtbboy1993
Жыл бұрын
@@ridingwithjoshandwendy Maybe the ones I tried were different, but looked the same.The ones I tried felt similar to M396. They had reach adjustment too. I see Tekro has a picture showing the reach adjustment at the the inside of the lever where the push rod is. The brakes come with E10.11 resin pads. The pads I used with Spyke were P20.11. maybe not, I see they are listed as performance resin, so maybe not the same as TRP B20.11 which were listed as semi metallic, I see some retailers list them as ceramic. But I know mine were TRP B20.11 as that's what was on the back of them, not all of the pads had branding, but some did. The red pads on the TRP website are more of a cherry red pinkish colour, while the TRP B20.11 is more cherry red with slight orange to it.
@wiliam-bd
7 ай бұрын
yo josh im 5'10 what do you think L or medium i need the bike for all mountain use
@ridingwithjoshandwendy
7 ай бұрын
I think a large would be ideal 👌
@GRAAmusic
Жыл бұрын
ive got an mk1 the only thing i hate about the bike is the QR
@ridingwithjoshandwendy
Жыл бұрын
Dido man, it’s a bummer they didn’t change that for the new mode!
@jimmysavage258
Жыл бұрын
I’m about 5’11” and I just bought a San Quentin in Large but now I’m nervous it might be to small as it seems Marins seem to run small.
@ridingwithjoshandwendy
Жыл бұрын
I wouldn’t necessarily say that; the reach on the new San Quentin is actually longer than most, which will make it feel roomy when standing up, but it has a super steep seat tube angle which prevents the frame from feeling to stretched out what you’re seated. I think the large will fit you great! I’m 6’1” on the XL which feels a bit longer than I’d usually prefer
@jimmysavage258
Жыл бұрын
@@ridingwithjoshandwendy I actually ended up buying the 2022 model on sale for $1900
@ridingwithjoshandwendy
Жыл бұрын
Oh gotcha! Ya you should still be good. In fact I’d advise against sizing up on that bike because the seat tube would be so dang high
@docmccoy9813
Жыл бұрын
3:44 That geometry is hard in the eyes.
@ridingwithjoshandwendy
Жыл бұрын
Haha yes, definitely polarizing! I’m personally a fan
@bxmario
Жыл бұрын
I can't find this frame until June.y local marin dealers here in florida won't have it till then. Anyone know if it's available anywhere? Willing to pay extra to get it
@ridingwithjoshandwendy
Жыл бұрын
That seems to be the case everywhere sadly! Good luck!!
@Coerced
Жыл бұрын
If the 3 had better brakes still (deore range) and a 200mm+ drop on the XL (you can't spec this bike with 150mm drop, come on. Everyone is gonna have to replace that dropper) I'd get it without a second thought
@ridingwithjoshandwendy
Жыл бұрын
Ya, crazy about the short dropper! I’m thinking about building up the frame, at just $550 it’s not too bad
@janeblogs324
Жыл бұрын
Seatstays will snap in half with that long a dropper. Its a dirtjumper
@Coerced
Жыл бұрын
@@janeblogs324 it's braced by the construction holding the BB in place as well. I'm pretty sure it'll hold just fine. It's not a DJ
@TheCaptainsCog
Жыл бұрын
As a bmx rider I agree with you about most MTBs. The Seat tube is just too damn high!
@gregj7916
Жыл бұрын
The welds around the 5:12 mark look very poor…
@ridingwithjoshandwendy
Жыл бұрын
Interesting, I honestly don’t know enough to recognize that
@crispybacon1210
6 ай бұрын
Yo I’m loving the info I’m looking at buying one , I’m 5’9 Would I go large …? Thanks bro
@ridingwithjoshandwendy
6 ай бұрын
Good, glad you’re digging it! You could probably go with a large if you like a longer bike, but I think a medium could work for you too, especially if you want more of a dirt jumper feel
@kps666de
Жыл бұрын
I landed buying a british cro-mo frame. First point, wich talks for itself: 4130 cromo ;) But the best of all are the 415mm chainstays. This thing is playful AF. If you search for an agile toy a headtube angle under 65° is not fitting the concept at all.
@ridingwithjoshandwendy
Жыл бұрын
Sounds like a fun bike! My RSD Middlechild has 415 stays as well, they’re a hoot!
@kps666de
Жыл бұрын
@@ridingwithjoshandwendy Mine is a Stanton Switchback. The MC is also great.
@ridingwithjoshandwendy
Жыл бұрын
Nice, I’ve always wanted to ride one, they’re beautiful bikes!!
@kps666de
Жыл бұрын
@@ridingwithjoshandwendy Getting an RSD to europe is maybe the same pain in the ass as getting a stanton to north america ;)
@ridingwithjoshandwendy
Жыл бұрын
Haha sounds about right!
@PDillz
Жыл бұрын
Looking online I'm only seeing the San Quentin 2 at $2299... Where are you seeing it for $1400
@ridingwithjoshandwendy
Жыл бұрын
Are you talking about USD? On they’re website
@PDillz
Жыл бұрын
@@ridingwithjoshandwendy it's shows the Quintin 1 at $999 than a option for the 2 and it jumped to $2200
@ridingwithjoshandwendy
Жыл бұрын
Weird, not for me! Should be $1,499, and $1,999 for the SQ3
@mtbboy1993
Жыл бұрын
8:00 definitely avoid 1 & 2, skewers, You did not make that clear in the video, I think you thought only the 1 was skewer, but now 2 is too, and garbage fork, bad components. but those you can upgrade later. but you cant upgrade the dropouts. 2 was 12 axle before, but for some reason they changed that.
@ridingwithjoshandwendy
Жыл бұрын
That’s incorrect, just double checked on their website. 2 has 12x148
@gucass
Жыл бұрын
San Quentin looking more and more like a chromag every day lol
@ridingwithjoshandwendy
Жыл бұрын
Nah, Chromag has pretty dang high seat tubes still, plus the weird kink in the downtube.
@JustJake77
Жыл бұрын
Living on the Westcoast of BC... Where Chromag hails from, and they are literally everywhere here.... I can 100% confirm, the San Quentin looks nothing, or rides nothing, like a Chromag steed. They aren't even in the same conversation. Totally different in every way.
@skullsroad3642
Жыл бұрын
It's a hardtail. Most of them look 90 percent the same.
@ridingwithjoshandwendy
Жыл бұрын
Haha it’s all in the details! I guess the same could bet said about full suspension bikes, I remember when people thought every new DH rig “looked like a session”
@jameshawthorne6220
Жыл бұрын
Great vid. So the SQ2 moves from an air fork to a coil one for 2023. I assume that is a downgrade but the Rockshox catalogue is so confusing. Is a Recon RL in the 2022 model better than the FS35 Silver? It tempts me to stretch to the Roscoe 7 instead.
@ridingwithjoshandwendy
Жыл бұрын
Ya, definitely a down grade sadly. I really think the SQ3 is the way to go, we’ll worth the additional $500
@michaelmichaelagnew8503
Жыл бұрын
Wish the full suspension version had the same paintjob. That white to grey is ugly. Should have done white to black.
@mtbboy1993
Жыл бұрын
This is not completely true: XCM= cross country MILD XCT= cross country Tame XCR = cross country Relaxed But these forks are for relaxed, mild, tame rides.
@ridingwithjoshandwendy
Жыл бұрын
Sorry, what’s not completely true?
@mtbboy1993
Жыл бұрын
@Riding With Josh and Wendy My decoding of the names 😛 might be true who knows.
@ridingwithjoshandwendy
Жыл бұрын
Oh okay haha!
@timothydubber549
Жыл бұрын
‘Is this the most radical hardtail yet?’ I suppose so, if you disregard the ESD, everything ever made by Chromag, the On One Hello Dave, the Pole Taival, the Stanton Slackline, the BTR Ranger. Clickbait is exactly what it is.
@ridingwithjoshandwendy
Жыл бұрын
Show me one bike ever made that offers a size large with a 375 mm seat tube and I’ll change the title immediately. Gotta look beyond brand names and heat tube angles my man!
@user-rl4ji5ne4o
Жыл бұрын
It's an Enduro hardtail. Not a DJer. Still only a 140mm fork? Not 160mm? Most of the competition is running 160mm. Some even 180mm. Not 'fixed' that area in my eyes. They did good upping the stack though. I bought an XL SQ3 and the stack was so low it was more suitable for a non-human. Who is over 6' tall with a 29" inseam? The low stack made me not want to buy Marin again. Lost a repeat customer. Very disappointing design.
@ridingwithjoshandwendy
Жыл бұрын
Ya, similar story with the geo. I hated the high seat tube most, but the low stack sucked as well. I’m pretty curious to try this guy though! I’d have to disagree with you on the other part though, the Marin El Roy is their enduro hardtail. This is co-designed by Matt Jones, a professional slopestyle rider, to be a trail bike that will feel like a DJ.
@zakvandyke2451
Жыл бұрын
Personally a fan of Marin, and the new geometry might be better, but it's ugly in my unprofessional opinion (my OCD head loves symmetrical frames). Good info- thanks for the video.
@ridingwithjoshandwendy
Жыл бұрын
I love the look of a toptube at the same angle as the seat tube, which is usually hard to find on large and x-large frames. I haven’t seen a new XL San Quentin, but I’m wondering if it might look a little better than the smaller models
@amaraamar9031
Жыл бұрын
Great bike , rides smooth kzitem.infoUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L I added a bigger spring loaded seat to it . Takes a bit of adjusting cables to get brakes and shifting to perfect . I've owned quite a few bikes in the past that were absolutely uncomfortable to ride and they always ended up as garage wall decor . I'm not seeing that with this one. It's pretty light I've only ridden it a few miles but I like it . As for the pedals falling off in the other reviews , the pedal arms are aluminum along with the pedal studs look to be also . I would not overtighten them. I can see it would be very easy to overtighten them and strip the threads right off . All in all I think it's pretty good quality besides the aluminum pedal thing .
@ridingwithjoshandwendy
Жыл бұрын
Ah bummer! That's gotta be tough!
@_mgiles
Жыл бұрын
It might ride great but I personally think it's horrible looking.
@ridingwithjoshandwendy
Жыл бұрын
It looks pretty sick in the bigger sizes! Check out this video with my XL: kzitem.info/news/bejne/pGuvqqWtcmiSgpw
@kiethpederson7558
Жыл бұрын
Paint schemes are awful, imo
@ridingwithjoshandwendy
Жыл бұрын
Ya, they're not great haha. I have the SQ3 with the white/black fade and it's decent, but I'd still prefer something a bit more subtle
@kiethpederson7558
Жыл бұрын
@@ridingwithjoshandwendy it’s hard enough choosing which bike to buy anyways let alone the pain or color way
Пікірлер: 187