Excellent! will help me to find the problem on my 1999 Argosy cab problem.
@mariusschamrel9514
2 жыл бұрын
Nice video, We down in South Africa, have these FLB cabovers, most run N14 Cummins with Eaton-Fuller 18 speeds these were replaced by the Argosy with Cummins ISX ,great video overall, and goodluck.... these Aluminum bodies are hard to maintain ....
@DavidWilliams-ol3vp
2 жыл бұрын
When u get this truck done,what do you intend to do withit?
@alexanderanfinogenov3625
Жыл бұрын
Where did you buy the rebuild kits from???
@incrediblemember1208
Жыл бұрын
ebay
@alexanderanfinogenov3625
Жыл бұрын
@@incrediblemember1208 I have similar problem with cab lock...but with Peterbilt 362...
@incrediblemember1208
Жыл бұрын
@@alexanderanfinogenov3625 Yea for me the rebuild helped , but I still had a leak! If I am correct its one of the pistons that picks up the cab , pain in the ass brother
@guillymendoza6514
Жыл бұрын
Hey was up bro I got the truck now I need some info
@cdl9239
2 жыл бұрын
If the truck starts and long enough to build air that cab jack works by jacking or air the black button on the jack controls the air the pump is oil the air is easier and one two three if you had a leak the cab wouldn't do anything be careful with cabovers better known as mouse traps you don't need no old lines breaking while underneath it
@incrediblemember1208
2 жыл бұрын
Thank you I will try doing that👍
@mballa105
2 жыл бұрын
Check to make sure your hydraulic reservoir is full. Pump a little and then check again and add some till all line are full to hold pressure
@incrediblemember1208
2 жыл бұрын
Ok I will try to see if that helps 👍
@rodrigosantos-of4mf
2 жыл бұрын
For sale freightliner????
@incrediblemember1208
2 жыл бұрын
12k as Is
@maxpuppy96
2 жыл бұрын
Mine did that you have to keep pumping your ass off until the cab up and lock it.
@MrTrapichero
2 жыл бұрын
You need to put a 10 o 13 speed
@diegoballerino9423
2 жыл бұрын
En spañol
@cdl9239
2 жыл бұрын
There's no leak you don't have enough oil in the pump
@incrediblemember1208
2 жыл бұрын
I am adding oil every time I pick it up and I leave the fill plug open not to stress the pump, when it comes down some oil come out of the fill hole/ how much does it want I dont understand?
@cdl9239
2 жыл бұрын
@@incrediblemember1208 ok you have add oil in the filling hole but when you going to let it down you have to put the bolt back in it so you don't lose the oil you can keep it open to add or jack it up coming down plug it to keep what you got
Пікірлер: 21