Haha, we've all been there! You got the job done. For this kind of size, using hotair to remove is a good choice. Another technique is the good old razor blade - cut the leads near the top of the ic, remove the plastic bit, and then use chisel tip with some flux to pick up the pins that are soldered on. This brings risk of breaking up pads though, if you are crazy with it. I think when soldering back on though, I would wick the existing tin off the pads, and then pin the four corners manually with a soldering iron, some flux, and a bit of solder on the tip of the iron. Then, after you pin the chip in place you can manually solder every pin using the drag technique or just doing it one pin at a time with a needle tip. Usually flux is a good thing, I think though you went a bit overboard with it. It just made you have to clean alot more. Experiment with your usage of flux, you may be surprised how little you need to get the job done.
@MurangaZW
25 күн бұрын
@@andrewortman4402 amazing brother i take not i will try to do one by one hopefully you will see the video when i make one exactly how you explained i do not have better flux but i hopebi will buy soo as i am still learning Thank you immensely for sharing the knowledge
@sherman5k756
28 күн бұрын
I somehow suffer from watching this
@MurangaZW
27 күн бұрын
@@sherman5k756 how so?
@MurangaZW
27 күн бұрын
Watch this kzitem.info/news/bejne/sWl8mXd7hJuqo4osi=3fPgJ_kyendNd_98
@ArturSobkow
27 күн бұрын
Get hot air to 340* and scalpel, heat up places where solder is "glue dot" - individually no need to try to preheat whole chip around whole time, put scalpel between pins where "glue dot" are from top to bottom and back out, you will get rid of the Solder glues from between the pins.
@MurangaZW
27 күн бұрын
@@ArturSobkow noted thanks you and you are highly appreciated for sharing your knowledge i am greatful!🙏
@Arkkukie
27 күн бұрын
You remind me of good old days
@MurangaZW
27 күн бұрын
@@Arkkukie thanks are you now a professional?
@AbdulHadi-uw4qy
28 күн бұрын
well this is too relatable i think
@MurangaZW
28 күн бұрын
@@AbdulHadi-uw4qy 😂😂😂 well when i see people doing it it looks so easy i guess its because of practice
@AbdulHadi-uw4qy
27 күн бұрын
@@MurangaZW true
@MurangaZW
27 күн бұрын
@@AbdulHadi-uw4qy i did try again and i think i got it right even though it wasn't easy
@AbdulHadi-uw4qy
27 күн бұрын
@@MurangaZW well congrats cuz i never get a second chance -_-
@MurangaZW
27 күн бұрын
@@AbdulHadi-uw4qy oh sorry to hear that but why did you get another chance
@Chikafu.M
27 күн бұрын
Take time and practice you will get it
@MurangaZW
27 күн бұрын
@@Chikafu.M thanks 🙏
@JamieBthe2nd
27 күн бұрын
I absolutely want to see more of this. 😄 Subbed.
@MurangaZW
27 күн бұрын
@JamieBthe2nd well stay tuned I have managed to do solder it better will upload soon please do subscribe
@JamieBthe2nd
27 күн бұрын
@@MurangaZW looking forward to it. 👍😁
@MurangaZW
27 күн бұрын
@JamieBthe2nd thanks I will sure you the one I think I solder better
The PCB is not fixed, and sometimes it moves during the soldering process. Fixing it will help. Also, I recommend watching more videos and practice on dead boards and your experience will get better.
@MurangaZW
22 күн бұрын
@@ziadfawzi thank you immensely i will do so i have lots of spare pcb and i am practicing every day
@diegovianavillegas3297
28 күн бұрын
More flux and more solder is always the answer for this guy, but not s better technique
@MurangaZW
28 күн бұрын
@@diegovianavillegas3297 thank i will take note what can i do to improve
@FreAk_dr.
25 күн бұрын
like i said do not put to much flux in it...🤣🤣🤣
@MurangaZW
25 күн бұрын
@@FreAk_dr. thank you brother we did it
@MoizRedYT
27 күн бұрын
My god ...
@MurangaZW
27 күн бұрын
@@MoizRedYT it's funny 😁 isn't it 🤣
@thatlittlefrog.
27 күн бұрын
is bro not aware of solder paste
@MurangaZW
27 күн бұрын
@@thatlittlefrog. no bro is learning though those are dead pcb that i use for practice
@abdoun8214
27 күн бұрын
Dont you ever solder again. EVER.
@MurangaZW
27 күн бұрын
@abdoun8214 but why I love it I awill keep trying I have already done some job like changing type c changing port
@abdoun8214
27 күн бұрын
@@MurangaZW just joking , lol
@MurangaZW
27 күн бұрын
@@abdoun8214 i can take a joke 😂
@MurangaZW
27 күн бұрын
@@abdoun8214 checking this out kzitem.info/news/bejne/sWl8mXd7hJuqo4osi=3fPgJ_kyendNd_98
@reedski
27 күн бұрын
quit soldring bro.
@MurangaZW
27 күн бұрын
@reedski it's too late bro ain't no way I will be quitting I have a lot of dead boards and I have a hot air station what should I do with it
Пікірлер: 49