Hey thanks for the demo. Been wondering about this kit
@derrickmitchell39dm
8 ай бұрын
Im curious to know how much is the kit? Thanks.
@mauricejohns3635
Жыл бұрын
Thanks for the reply. Another question for you. I'm looking at getting this starters package the Kit-1S. Its supposed to have everything in it. Witch kit did you get? I'm really looking for a or the Kit that have the smooth sided slugs. Did yours come with that or did you have to order that separate, and will it come with the FX still dies or is that separate too? And why is there website so hard to navigate LOL. I emailed them and got a price list of everything I was looking for. But trying to find that all in one Kit doesnt seem like its there. I'd have to track down every peace one by one. I found that Kit but it just bring you to a description of it. I don't know what i'm looking at.
@davidmaccormick1880
10 ай бұрын
Great intro to the press. Do the slugs fly as well or better than the factory units? Thaks
@frankbellinger605
8 ай бұрын
I'd LOVE a video showing how to adjust the weight up and down. You mentioned lowering the punch but won't that cause contact with the point form pin??
@donaldroyer2961
Жыл бұрын
I've been reloading for years and have decided to get into swaging my own projectiles. Where would you recommend I start my education into this field? To be honest just looking at the Corbin price list I'm overwhelmed, mainly due to the fact I don't know exactly what I need to make jacketed .556 and 6.5. Any help would be GREATLY appreciated!
@mistergrendel32
Жыл бұрын
Spend some time on the Corbin website and read. It will tell you everything you want to know.
@DimaProk
Жыл бұрын
I was the same way even though I already owned 22 cal swage dies and made my own bullets, still would feel lost and overwhelmed on his website. I started reading his book which helped, it was online but I can't find a link anymore and that clarified. After some time you'll start understanding the differences, the book helped me understand the difference between all the different dies he is offering.
@downunder5594
2 жыл бұрын
Any chance you could make a video of the hybrid type slugs
@mistergrendel32
Жыл бұрын
Your press should have come with a rectangular tray. It fits over the die and the extruded lead falls into the tray.
@mauricejohns3635
Жыл бұрын
Will these molds work with any press? A friend of mine wants to give me his press from his reloading kit. Or will these molds only work with the Corbin press? His press moves upwards I noticed things Corbin's come down?
@t206n
2 жыл бұрын
What guns are you putting these through and what’s the results?
@shanebarry7469
Жыл бұрын
that was awesome. Question ? Which one is less expensive the Fx style or the other and how much does the kit from corbin cost ? Is it worth the investment THANKYOU FOR YOUR TIME AND EFFORT
@SlugsPress
3 күн бұрын
We are a manufacturer of bullet presses. You can watch our videos to learn about our products.
@domingoliao2724
Жыл бұрын
I think cupbased slugs are for less powerful airguns & flatbased are for the powerful ones!
@mistergrendel32
Жыл бұрын
The recommended way to lube your cores by Dave Corbin is this: apply a small amount of lube on your index finger and simply roll the core around between your thumb and index finger. IF your press and core cutter were mounted on the front of your bench, you would have much more room to navigate wouldn’t you? 😜🤔
@roonimac
2 жыл бұрын
I ordered this exact setup for the fx hybrid. Waiting on my dye. I got my press.
@user-nq3gg3ib7d
2 жыл бұрын
How much did you buy the piston.. is it good and accurate
@nsboost
2 жыл бұрын
Making “hybrids” such. So much work. And I don’t think they fly that well. Standard hollow point o give has been the best for me
@roonimac
2 жыл бұрын
@@nsboost making hybrids is double the time but they fly as good if not better in my FX rifles and the expansion on impact is way way more lethal. Makes the slug diameter double the size of a regular hp.
@nsboost
2 жыл бұрын
@@roonimac I do agree with expansion. They are flat deadly. I just haven’t got them to fly as well yet. My superior barrel 700mm .25 is really liking a 32gr standard hollowpoint moving at about 980fps.
@eduardoperez7797
Жыл бұрын
What does a setup like yours run for?
@jofher007
8 ай бұрын
i know corbin sells two kits what kit did you ended up getting?
@hi-tonemichael8030
2 жыл бұрын
Where do you buy the big coil of lead ??
@shaunharris3690
Жыл бұрын
That's great how can I get one of these
@BlazeTrades
2 жыл бұрын
can you use your own molten lead to cast some lead wire you think?
@NevilofMars
Жыл бұрын
That depends on what caliber you make I think. The Corbin website sells a 5 slug mold for .22 caliber bullets. I think you can also use that for swaging .22 air rifle pellets. You must use pure lead. Do not use lead wheel weights!!! The lead is too hard and you could break your very expensive swaging dies!
@jimmyvoltage
2 жыл бұрын
Hello and thank you for the vid. I am interested in this press and you have answered many questions I had. As I was watching I noticed that your strokes of the press are not consistent. I notice you stroke most of the time with 2 strokes and other times 3 times and the pressure used is inconsistent. Have you weighed your wire slugs to see how consistent they are? If your wire slugs are inconsistent that will make the slug also inconsistent from the pressure needed to remove the excess lead. I am interested in the results of the other options of the die.
@user-nq3gg3ib7d
2 жыл бұрын
Hello, I need a piston similar to this, can you help me, I want someone to sell it to me, it is reliable, reliable and at an acceptable price 🌷
@nsboost
2 жыл бұрын
If you run the press through a full cycle.. lock to lock.. it doesn’t matter how fast or slow you go.. or how much the lead weighted when you started. They come out consistent. Good technique is to leave the press at full stroke for a couple seconds to allow the lead time to flow. But in my experience it doesn’t amount to much of a difference
@DimaProk
Жыл бұрын
@@nsboost I think consistency is the key, try to do everything consistently, I mean yeah if you tap 2x one time and 3x time it might not matter but the thing you said about leaving the press at full stroke for couple seconds I think is important for consistency.
@downunder5594
2 жыл бұрын
Hi was wondering what size is the lead wire
@bendangwatilongkumer4829
2 жыл бұрын
What s the size of ur lead roll ...the wire size(mm)
@billreynolds2766
2 жыл бұрын
And where to get it?
@tiaraevaline486
Жыл бұрын
hello sir.. where you buy lead wire for pellets?
@PeakyBlinder
Жыл бұрын
They recommend that your plugs you cut should be a maximum of 3 grains away from your finished slug weight. So a 28 grain plug for a 25 grain slug . I'm not sure why but that's what I was told.
@xMrjamjam
Жыл бұрын
To allow excess to be squished off i imagine
@derrickmitchell39dm
8 ай бұрын
Sir, can you tell me how much the kit cost. Thanks.😊
@titaniopotenza5163
6 ай бұрын
its very expensive as high-end airgun. if you want to buy one, its better you invite your friends or community to joint venture then use it together
@richlasavage7304
3 ай бұрын
Around $1900
@derrickmitchell39dm
3 ай бұрын
@@richlasavage7304 daaaaamn!
@glennsowacke9752
Жыл бұрын
Where did you buy your press?
@santiagoomaged3914
Жыл бұрын
Hi Sir, after watching your video many times im interested to buy one, i contacted sales at corbin the price is $769 dollars if im not mistaken, unfortunately, they cannot send outside USA, is there any options to buy this set outside USA, thank you so much
@regiepoblador748
2 жыл бұрын
Im from Philippines how can i purchase complete Corbin kit?, thanks..
@WaschyNumber1
8 ай бұрын
What does a Standart set cost?
@PauloHilario6281820955pchs
Жыл бұрын
where to buy this slugs mold press
@WaschyNumber1
8 ай бұрын
Wher is the web page from the seller? 🤔
@DewaSenapanIndonesia
2 жыл бұрын
hello Mastet greetings to meet me from Indonesia🙏🙏🇮🇩🇮🇩
@PauloHilario6281820955pchs
Жыл бұрын
where to buy
@airgunsofidaho4886
2 жыл бұрын
When is your next video? On slug testing
@immolder
2 жыл бұрын
Working on it, should be soon.
@airgunsofidaho4886
2 жыл бұрын
@@immolder i am interested in your results. Since I been making my own 22cal slugs for a few weeks. I have tested a few different weights and gotten some good results from different weights. I'll be uploading some videos on my 22 slugs soon.
@immolder
2 жыл бұрын
@@airgunsofidaho4886 It is a fun challenge, shot some today and I am still tweaking for better groups. Not getting what I want yet. I will be looking forward to your video.
@naumanhussain8758
2 жыл бұрын
Hello sir i am intersting to purchase this machinery
@user-bd8tq4du1b
2 жыл бұрын
how much is the mold
@volcom84bait
Жыл бұрын
How much is the kit? And what comes with it??
@mistergrendel32
Жыл бұрын
Go to the Corbin website and do some reading. The website is a WEALTH of information. 🤓
@heathobryan7128
2 жыл бұрын
I might need to invest in one of those! What is the price savings vs buying name brand slugs?
@precisionairriflechannel2983
2 жыл бұрын
It definitely isn't cost effective. I look at the ability to customize the slug to my specs, as the reason to buy.
@nsboost
2 жыл бұрын
It would take YEARS to recoup the cost for personal use. But.. you don’t have to order slugs when needed… you can make them in any weight… Corbin will even make dies to your specs at no extra charge.
@mistergrendel32
Жыл бұрын
@@nsboost “Recoup the cost” is no longer an issue. When the communist left is attacking the Second Amendment from every direction, being able to SWAGE your own bullets IS the skill to have. You’ll pretty much be able to name your price.
@oscarguisado1163
2 жыл бұрын
Como cosigo una
@WaschyNumber1
8 ай бұрын
If they would sell outside USA they would have much more customers like me, if the quality is really better than the way overpriced Presslug press. 🤔 I can't still find the web page for price lists
@Tajikistan_Hunter.
Жыл бұрын
I need for two calibers for FX 0.22 and for edgun leshiy 0.25
@rodrigobeija3643
2 жыл бұрын
Como q faço pra conpra uma dessa
@oscarguisado1163
2 жыл бұрын
Como consigo una 4.5mm
@PeakyBlinder
Жыл бұрын
What diameter hollow point pin were you using ?
@letrerosokdiaz5301
Жыл бұрын
Como hogo para conprar soy de chile
@roonimac
2 жыл бұрын
So let me ask you this. If you say want to make a 33gn vs a 22gn what would you have to do?
@NADHUNTER
2 жыл бұрын
where can i buy the tool? please give the purchase link 🙏🙏
@SlugsPress
3 күн бұрын
We are a manufacturer of bullet presses. You can watch our videos to learn about our products.
@NADHUNTER
3 күн бұрын
@@SlugsPress thanks
@user-nq3gg3ib7d
2 жыл бұрын
How much does a piston cost? What is its quality? Have you tried shooting and accuracy?
@timbuckohfive2751
2 жыл бұрын
The press is about $800 US
@keysakhaerunisa4715
2 жыл бұрын
Bagaimana caranya untuk membeli barang ini thanks
@sniperdm
2 жыл бұрын
Berapa harga mesin ini pak
@musidism990
Жыл бұрын
what is the name of the tin you are using, I want to buy the one that looks like a roll
@destroyerslug654
Жыл бұрын
Bagaimana cara membelinya
@le3045acp
Жыл бұрын
someone already asked but you havent answered what does a 22 set up cost
@mistergrendel32
Жыл бұрын
That’s a vague question. Are you talking .22 air gun pellets, .22 jacketed bullets w/standard jackets, or .22 jacketed bullets w/thick jackets? 🤔
@le3045acp
Жыл бұрын
@@mistergrendel32 a 22 air rifle set up
@mistergrendel32
Жыл бұрын
@@le3045acp Go to the Corbin’s website and read the page and links on Air Rifle Pellets. It will tell you everything you want to know. 🤓
@letrerosokdiaz5301
Жыл бұрын
Mademe una para chile
@Strengthandconditioning60
Жыл бұрын
Maybe if Rcbs, Hornady, Dillon and Lee get in the game it wouldn't cost so much
@MolesNoMoreEurekaMO
Жыл бұрын
They won’t get into the game because there isn’t a big enough market for bullet swaging. Plus, quality swaging equipment is on another level compared to reloading equipment. Highly trained tool makers make swaging equipment where as a button pusher can make reloading equipment (dies, presses, etc).
@Seniperklk
9 ай бұрын
Cek harga
@rudyfrengadipuput2373
2 жыл бұрын
Manaaa akurasi nyaaaa dengan slug baru lo udh 3 minggu gada lagi video nya kelamaan nyeting nya
@Tajikistan_Hunter.
Жыл бұрын
good afternoon, dear, could I order a press from you
@jennysok
2 жыл бұрын
Where can I buy it?
@billycong9625
2 жыл бұрын
how much the press and die
@amransportseniperbugis6792
2 ай бұрын
Icek harga ,indo
@hoangngoctv7481
2 жыл бұрын
Gửi về việt Nam tôi mua chiếc
@user-nq3gg3ib7d
2 жыл бұрын
اريد شراء واحدة هل تستطيع ان تعطيني رابط او عنوان البائع🌷
Пікірлер: 96